Minor comment/whitespace fixes. Also some minor logic changes that
are mainly for defensive programming purposes (i.e., ensure to always
set malloc_hook_set to true or false, and then check it before we try
to actually invoke it).
Instead of unconditionally setting the memory hook, only set it when
the memory hooks are both available and have been enabled (e.g.,
opal/mca/memory/linux has decided that it *can* be enabled, and when
the mpi_leave_pinned MCA param is set to 1, or is set to -1 and some
component requested the memory hooks be enabled).
If we set the memory hook when memory hooks are not enabled,
__malloc_hook will be NULL, which will cause problems when
btl_openib_malloc_hook() tries to invoke it.
Fixesopen-mpi/ompi#638.
CID 1269821 Dereference null return value (NULL_RETURNS)
This is another false positive that can be silenced by looping on
opal_list_remove_first instead of using both opal_list_is_empty and
opal_list_remove_first.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
CID 1301390 Dereference before null check (REVERSE_INULL)
endpoint can not be NULL here. Remove NULL check.
CID 1269836 Unintentional integer overflow (OVERFLOW_BEFORE_WIDEN)
CID 1301388 Bad bit shift operation (BAD_SHIFT)
Add ull to integer constants to ensure the math is done in 64-bits not
32.
CID 715749 Explicit null dereferenced (FORWARD_NULL)
As far as I can tell this parser function does not accept a line that
does match key = value. If that is the case then value should never be
NULL. If it is it is a parse error. Updated the code to reflect
this. Also modified the intify function to do something more sane
(strtol vs atoi with hex detection).
CID 1269820 Dereference null return value (NULL_RETURNS)
This is a false positive as strchr will never return NULL here. It
makes sense, though, to quiet the warning by changing the do {} while
() loop to a while () loop.
CID 1269780 Dereference after null check (FORWARD_NULL)
Just return an error if the endpoint's cpc data is NULL.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
CID 1269674 Ignoring number of bytes read (CHECKED_RETURN)
Check that we read enough bytes to get a complete async command.
CID 1269793 Missing break in switch (MISSING_BREAK)
Added comment to indicate fall through was intentional.
CID 1269702: Constant variable guards dead code (DEADCODE)
Remove an unused argument to opal_show_help. This will quiet the
coverity issue.
CID 1269675 Ignoring number of bytes read (CHECKED_RETURN)
Check that at least sizeof(int) bytes are read. If this is not the
case then it is an error.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
CID 1269931 Uninitialized scalar variable (UNINIT)
Initialize complete async message. This was not a bug but the fix
contributes to valgrind cleanness (uninitialed write).
CID 1269915 Unintended sign extension (SIGN_EXTENSION)
Should never happen. Quieting this by explicitly casting to uint64_t.
CID 1269824 Dereference null return value (NULL_RETURNS)
It is impossible for opal_list_remove_first to return NULL if
opal_list_is_empty returns false. I refactored the code in question to
not use opal_list_is_empty but loop until NULL is returned by
opal_list_remove_first. That will quiet the issue.
CID 1269913 Dereference before null check (REVERSE_INULL)
The storage parameter should never be NULL. The check intended to
check if *storage was NULL not storage.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
CID 1269933 Uninitialized scalar variable (UNINIT)
This CID isn't really an error but it is best for both valgrind and
coverity cleanness to not write uninitialized data. Added an
initializer for async_command in btl_openib_component_close.
CID 1269930 Uninitialized scalar variable (UNINIT)
Same as above. Best not to write uninitialized data. Added an
initializer for async_command.
CID 1269701 Logically dead code (DEADCODE)
Coverity is correct. The smallest_pp_qp will always be 0. Changed the
initial value so that the smallest_pp_qp is set as intended. If no
per-per queue pair exists then use the last shared queue pair. This
queue pair should have the smallest message size. This will reduce
buffer waste.
CID 1269713 Logically dead code (DEADCODE)
False positive but easy to silence. The two check are meaningless if
HAVE_XRC is 0 so protect them with #if HAVE_XRC.
CID 1269726 Division or modulo by zero (DIVIDE_BY_ZERO)
Indeed an issue. If we get an invalid value for rd_win then this will
cause a divide-by-zero exception. Added a check to ensure rd_win is >
0. Also updated the help message to reflect this requirement.
CID 1269672 Ignoring number of bytes read (CHECKED_RETURN)
This error was somewhat intentional. Linux parameter files are
probably not empty but it is safer to check the return code of read to
make sure we got something. If 0 bytes are read this code could SEGV
whe running strtoull.
CID 1269836 Unintentional integer overflow (OVERFLOW_BEFORE_WIDEN)
Add a range check to read_module_param to ensure we do not
overflow. In the future it might be worthwhile to report an error
because these parameters should never cause overflow in this
calculation.
CID 1269692 Calling risky function (DC.WEAK_CRYPTO)
??? This call was added in 2006 but I see no calls to the rest of the
rand48 family of functions. Anyway, we SHOULD NEVER be calling seed48,
srand, etc because it messes with user code. Removed the call to
seed48.
CID 1269823 Dereference null return value (NULL_RETURNS)
This is likely a false positive. The endpoint lock is being held so no
other thread should be able to remove fragments from the list. Also,
mca_btl_openib_endpoint_post_send should not be removing items from
the list. If a NULL fragment is ever returned it will likely be a
coding error on the part of an Open MPI developer. Added an assert()
to catch this and quiet the coverity error.
CID 1269671 Unchecked return value (CHECKED_RETURN)
Added a check for the return code of mca_btl_openib_endpoint_post_send
to quiet the coverity error. It is unlikely this error path will be
traversed.
CID 1270229 Missing break in switch (MISSING_BREAK)
Add a comment to indicate that the fall-through is intentional.
CID 1269735 Dereference after null check (FORWARD_NULL)
There should always be an endpoint when handling a work
completion. The endpoint is either stored on the fragment or can be
looked up using the immediate data. Move the immediate data code up
and add an assert for a NULL endpoint.
CID 1269740 Dereference after null check (FORWARD_NULL)
CID 1269741 Explicit null dereferenced (FORWARD_NULL)
Similar to CID 1269735 fix.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
When a libibverbs driver returns NULL for its context, it's the Open
MPI libibverbs fake driver. Hence, this device is simply not
supported -- ignore it.
Defer initializing the CPCs until we know that we have devices/ports
to use. This both prevents some useless work at startup when there
are no devices/ports to use, and also prevents librdmacm complaining
that there are no verbs-capable RDMA devices available (e.g., if a
Cisco usNIC device is present, but does not present a verbs RDMA
interface).
This commit fixes an assert when trying to cleanup a module we failed
to initialize. There is no protection around the OBJ_DESTRUCT calls so
they will always be called so similarly we should always call
OBJ_CONSTRUCT at init.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Enabling the FT code breaks compilation (again). This series
tries to fix the compiler errors. This is again only fixing
the compiler errors without any warranty that the result
might actually support FT again.
This first patch moves orte_cr_continue_like_restart from ORTE
to opal_cr_continue_like_restart in OPAL. This only leaves three
calls from OPAL to ORTE in the FT code. As it is not yet 100%
clear how to handle these calls the code orte_sstore.set_attr()
has been #ifdef'd out for now.
The derived segment type (btl_openib_segment_t) was intended to store
the registration info needed for put and get. In BTL 3.0 this is no
longer required. I intended to remove this type as part of
open-mpi/ompi@74f1af4548 .
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit should resolve an issue seen with CUDA-aware support. The
problem came in with BTL 3.0. Before 3.0 the size of the copy was
stored in the incoming segment's des_remote_count field. This field
does not exist in BTL 3.0 so I stored the value in the
des_segment_count field. This caused problems with the cuda support
code. To fix the issue the endpoint pointer is now stored in the in
fragment's endpoint pointer which free's up the segment's des_cbdata
pointer for storing the transfer size.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
call the opal_common_verbs_mca_register function to make sure that
opal_common_verbs_want_fork_support mca parameter is created and therefore
can be used to control the fork support.
In order to have an effect, ibv_fork_init should be called in the
beginning of the verbs initialization flow - before the calls to the
ibv_create_qp and ibv_create_cq verbs.
These functions are called from the oob/ud code and by the time the
other verbs components (btl openib, pml yalla, ...) call ibv_fork_init,
it's too late. This commit forces the call to ibv_fork_init (if it's
requested) right at the beginning of all the components that are using
verbs.
(ibv_fork_init() can be safely called multiple times)
This commit also removes the btl_openib_want_fork_support mca parameter
and adds a new mca parameter instead - opal_verbs_want_fork_support.
Through this new parameter, fork support may be requested for ALL
components.
The default value for this parameter is set to 1.
Before this commit the btl_openib_want_fork_support parameter didn't
provide fork support for the openib btl if its value was set to 1.
(because when openib called ibv_fork_init, it was already after the
calls to ibv_create_* in oob/ud and thereofre it failed).
Use of the old ompi_free_list_t and ompi_free_list_item_t is
deprecated. These classes will be removed in a future commit.
This commit updates the entire code base to use opal_free_list_t and
opal_free_list_item_t.
Notes:
OMPI_FREE_LIST_*_MT -> opal_free_list_* (uses opal_using_threads ())
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit adds an owner file in each of the component directories
for each framework. This allows for a simple script to parse
the contents of the files and generate, among other things, tables
to be used on the project's wiki page. Currently there are two
"fields" in the file, an owner and a status. A tool to parse
the files and generate tables for the wiki page will be added
in a subsequent commit.
Some BTLs do not require local registration for some rdma
transactions. For example: inline put on openib, fma put on ugni. This
commit adds code to expose the local registration thresholds to BTL
users. Optimized code can take advantage of this information to
improve rdma performance.
The send inline optimization uses the btl_sendi function to achieve lower
latency and higher message rates. Before this commit BTLs were allowed to
assume the descriptor was non-NULL and were expected to return a valid
descriptor if the send could not be completed using btl_sendi. This
behavior was fine until the usage of btl_sendi was changed in ob1. This
commit allows the caller to specify NULL for the descriptor. The affected
btls have been updated to handle this case.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
in this code and it ended up changing the logic that is used to set up eager RDMA.
Rather than setting up eager RDMA with a high priority message, it did it the other
way around. For some reason, CUDA-aware support did not like this. So, basically,
restore the logic to the way it was prior to the refactoring. The refactoring did not
intend to change this. Lightly reviewed by hjelmn.
