Add a framework to support different types of threading models including
user space thread packages such as Qthreads and argobot:
https://github.com/pmodels/argobotshttps://github.com/Qthreads/qthreads
The default threading model is pthreads. Alternate thread models are
specificed at configure time using the --with-threads=X option.
The framework is static. The theading model to use is selected at
Open MPI configure/build time.
mca/threads: implement Argobots threading layer
config: fix thread configury
- Add double quotations
- Change Argobot to Argobots
config: implement Argobots check
If the poll time is too long, MPI hangs.
This quick fix just sets it to 0, but it is not good for the
Pthreads version. Need to find a good way to abstract it.
Note that even 1 (= 1 millisecond) causes disastrous performance
degradation.
rework threads MCA framework configury
It now works more like the ompi/mca/rte configury,
modulo some edge items that are special for threading package
linking, etc.
qthreads module
some argobots cleanup
Signed-off-by: Noah Evans <noah.evans@gmail.com>
Signed-off-by: Shintaro Iwasaki <siwasaki@anl.gov>
Signed-off-by: Howard Pritchard <howardp@lanl.gov>
Will be replaced by PRRTE. Ensure that OMPI and OPAL layers build
without reference to ORTE. Setup opal/pmix framework to be static.
Remove support for all PMI-1 and PMI-2 libraries. Add support for
"external" pmix component as well as internal v4 one.
remove orte: misc fixes
- UCX fixes
- VPATH issue
- oshmem fixes
- remove useless definition
- Add PRRTE submodule
- Get autogen.pl to traverse PRRTE submodule
- Remove stale orcm reference
- Configure embedded PRRTE
- Correctly pass the prefix to PRRTE
- Correctly set the OMPI_WANT_PRRTE am_conditional
- Move prrte configuration to the end of OMPI's configure.ac
- Make mpirun a symlink to prun, when available
- Fix makedist with --no-orte/--no-prrte option
- Add a `--no-prrte` option which is the same as the legacy
`--no-orte` option.
- Remove embedded PMIx tarball. Replace it with new submodule
pointing to OpenPMIx master repo's master branch
- Some cleanup in PRRTE integration and add config summary entry
- Correctly set the hostname
- Fix locality
- Fix singleton operations
- Fix support for "tune" and "am" options
Signed-off-by: Ralph Castain <rhc@pmix.org>
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
Signed-off-by: Joshua Hursey <jhursey@us.ibm.com>
The opal_gethostname() function provides a more robust mechanism
to retrieve the hostname than gethostname(), which can return
results that are not null-terminated, and which can vary in its
behavior from system to system.
opal_gethostname() just returns the value in opal_process_info.nodename;
this is populated in opal_init_gethostname() inside opal_init.c.
-Changed all gethostname calls in opal subtree to opal_gethostname
-Changed all gethostname calls in orte subtree to opal_gethostname
-Changed all gethostname calls in ompi subdir to opal_gethostname
-Changed all gethostname calls in oshmem subdir to opal_gethostname
-Changed opal_if.c in test subdir to use opal_gethostname
-Changed opal_init.c to include opal_init_gethostname. This function
returns an int and directly sets opal_process_info.nodename per
jsquyres' modifications.
Relates to open-mpi#6801
Signed-off-by: Charles Shereda <cpshereda@lanl.gov>
A typical parameter of opal_output_verbose() is ORTE_NAME_PRINT(...),
which is an expensive macro.
Most of the time, this is unnecessary since the verbosity level is too high.
Make opal_output_verbose() a macro so such arguments are only evaluated if the
verbosity is low enough.
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
This commit contains the following changes:
- Remove the unused opal_test_init/opal_test_finalize
functions. These functions are not used by anything in the code
base or MTT. Tests use opal_init_util/opal_finalize_util instead.
- Get rid of gotos in opal_init_util and opal_init. Replaced them
with a cleaner solution.
- Automatically register cleanup functions in init functions. The
cleanup functions are executed in the reverse order of the
initialization functions. The cleanup functions are run in
opal_finalize_util() before tearing down the class system.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
The Open MPI code base assumed that asprintf always behaved like
the FreeBSD variant, where ptr is set to NULL on error. However,
the C standard (and Linux) only guarantee that the return code will
be -1 on error and leave ptr undefined. Rather than fix all the
usage in the code, we use opal_asprintf() wrapper instead, which
guarantees the BSD-like behavior of ptr always being set to NULL.
In addition to being correct, this will fix many, many warnings
in the Open MPI code base.
Signed-off-by: Brian Barrett <bbarrett@amazon.com>
In many cases, this was a simple string replace. In a few places, it
entailed:
1. Updating some comments and removing now-redundant foo[size-1]='\0'
statements.
2. Updating passing (size-1) to (size) (because opal_string_copy()
wants the entire destination buffer length).
This commit actually fixes a bunch of potential (yet quite unlikely)
bugs where we could have ended up with non-null-terminated strings.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Resolve a race condition between registering for a file to be removed upon termination and actual creation of that file by providing attributes that identify whether the path is a file or directory. This removes the need for PMIx to detect the difference.
Refs #4686
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
If available, have apps use registration capability to cleanup their session directories. Setup capability for vader to register its shared memory file location - let someone familiar with that code do so.
Final cleanup to track uid/gid, update the opal/pmix API to pass flags for ignore and leave top directory alone
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
gcc 7.[1,2] (at least) fails to correctly parse the OSX 10.13 sys/syslog.h
header. As a results we need to potect syslog support in OPAL, PMIX and
ORTE.
Signed-off-by: George Bosilca <bosilca@icl.utk.edu>
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
* `-mca mca_base_verbose file:foo` should create an output file with
the suffix `foo`. But since we free the pointer at the end of this
function then by the time we use it it is pointing to invalid memory.
* This commit fixes that corruption
* This commit also fixes the behavior of `file:` with no suffix.
Makes it the same as `file` without the colon.
Signed-off-by: Joshua Hursey <jhursey@us.ibm.com>
* Similar to `orte_map_stddiag_to_stderr` except it redirects `stddiag`
to `stdout` instead of `stderr`.
* Add protection so that the user canot supply both:
- `orte_map_stddiag_to_stderr`
- `orte_map_stddiag_to_stdout`
Signed-off-by: Joshua Hursey <jhursey@us.ibm.com>
- This allows the following MCA option to have an impact on the
framework verbose output as well.
* `-mca mca_base_verbose stdout`
Signed-off-by: Joshua Hursey <jhursey@us.ibm.com>
Define OPAL_MAXHOSTNAMELEN to be either:
(MAXHOSTNAMELEN + 1) or
(limits.h:HOST_NAME_MAX + 1) or
(255 + 1)
For pmix code, define above using PMIX_MAXHOSTNAMELEN.
Fixup opal layer to use the new max.
Signed-off-by: Karol Mroz <mroz.karol@gmail.com>
A few uninitialized common symbols are remaining:
common symbols generated by flex :
* opal/util/keyval/keyval_lex.l: opal_util_keyval_yyleng
* opal/util/keyval/keyval_lex.o: opal_util_keyval_yytext
* opal/util/show_help_lex.l: opal_show_help_yyleng
* opal/util/show_help_lex.l: opal_show_help_yytext
common symbol generated by "external" hwloc library:
* opal/mca/hwloc/hwloc191/hwloc/src/components.o: component_map
This commit fixes the following bugs:
- opal_output_finalize did not properly set internal state. This
caused problems when calling the sequence opal_output_init (),
opal_output_finalize (), opal_output_init ().
- opal_info support called mca_base_open () but never called the
matching mca_base_close (). mca_base_open () and mca_base_close ()
have been updated to use a open count instead of an open flag to
allow mca_base_open to be called through multiple paths (as may be
the case when MPI_T is in use).
- orte_info support did not register opal variables. This can cause
orte-info to not return opal variables.
- opal_info, orte_info, and ompi_info support have been updated to
use a register count.
- When opening the dl framework the reference count was added to
ensure the framework stuck around. The framework being closed
prematurely was a bug in the MCA base that has since been
corrected. The increment (and associated decrement) have been
removed.
- dl/dlopen did not set the value of
mca_dl_dlopen_component.filename_suffixes_mca_storage on each call
to register. Instead the value was set in the component
structure. This caused the value to be lost when re-loading the
component. Fixed by setting the default value in register.
- Reset shmem framework state on close to avoid returning a stale
component after reloading opal/shmem.
- MCA base parameters were not properly deregistered when the MCA
base was closed.
This commit may fix#374.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
supposed to. I.e., half-baked/not complete stuff.
This commit backs out all of r25545. Sorry folks!
This commit was SVN r25546.
The following SVN revision numbers were found above:
r25545 --> open-mpi/ompi@7f9ae11faf
to make MPI_IN_PLACE (and other sentinel Fortran constants) work on OS
X, we need to use the following compiler (linker) flag:
-Wl,-commons,use_dylibs
So if we're compiling on OS X, test to see if that flag works with the
compiler. If so, add it to the wrapper FFLAGS and FCFLAGS (note that
per a future update, we'll only have one Fortran compiler anyway).
Fixes trac:1982.
This commit was SVN r25545.
The following Trac tickets were found above:
Ticket 1982 --> https://svn.open-mpi.org/trac/ompi/ticket/1982
Many of the OPAL_ENABLE_FT should be OPAL_ENABLE_FT_CR, so fix those.
The OPAL Layer INC should call opal_output on restart so that it can refresh the string it prints to reflect the current pid/hostname which may have changed.
This commit was SVN r22824.
OMPI_* to OPAL_*. This allows opal layer to be used more independent
from the whole of ompi.
NOTE: 9 "svn mv" operations immediately follow this commit.
This commit was SVN r21180.
Check for error in fcntl, as we depend on close-on-exec,
F_SETFD will result in -1 in case of error (stored in errno).
To not have a follow-up warning about not freeing filename, move up.
This commit was SVN r21171.
After much work by Jeff and myself, and quite a lot of discussion, it has become clear that we simply cannot resolve the infinite loops caused by RML-involved subsystems calling orte_output. The original rationale for the change to orte_output has also been reduced by shifting the output of XML-formatted vs human readable messages to an alternative approach.
I have globally replaced the orte_output/ORTE_OUTPUT calls in the code base, as well as the corresponding .h file name. I have test compiled and run this on the various environments within my reach, so hopefully this will prove minimally disruptive.
This commit was SVN r18619.
such, the commit message back to the master SVN repository is fairly
long.
= ORTE Job-Level Output Messages =
Add two new interfaces that should be used for all new code throughout
the ORTE and OMPI layers (we already make the search-and-replace on
the existing ORTE / OMPI layers):
* orte_output(): (and corresponding friends ORTE_OUTPUT,
orte_output_verbose, etc.) This function sends the output directly
to the HNP for processing as part of a job-specific output
channel. It supports all the same outputs as opal_output()
(syslog, file, stdout, stderr), but for stdout/stderr, the output
is sent to the HNP for processing and output. More on this below.
* orte_show_help(): This function is a drop-in-replacement for
opal_show_help(), with two differences in functionality:
1. the rendered text help message output is sent to the HNP for
display (rather than outputting directly into the process' stderr
stream)
1. the HNP detects duplicate help messages and does not display them
(so that you don't see the same error message N times, once from
each of your N MPI processes); instead, it counts "new" instances
of the help message and displays a message every ~5 seconds when
there are new ones ("I got X new copies of the help message...")
opal_show_help and opal_output still exist, but they only output in
the current process. The intent for the new orte_* functions is that
they can apply job-level intelligence to the output. As such, we
recommend that all new ORTE and OMPI code use the new orte_*
functions, not thei opal_* functions.
=== New code ===
For ORTE and OMPI programmers, here's what you need to do differently
in new code:
* Do not include opal/util/show_help.h or opal/util/output.h.
Instead, include orte/util/output.h (this one header file has
declarations for both the orte_output() series of functions and
orte_show_help()).
* Effectively s/opal_output/orte_output/gi throughout your code.
Note that orte_output_open() takes a slightly different argument
list (as a way to pass data to the filtering stream -- see below),
so you if explicitly call opal_output_open(), you'll need to
slightly adapt to the new signature of orte_output_open().
* Literally s/opal_show_help/orte_show_help/. The function signature
is identical.
=== Notes ===
* orte_output'ing to stream 0 will do similar to what
opal_output'ing did, so leaving a hard-coded "0" as the first
argument is safe.
* For systems that do not use ORTE's RML or the HNP, the effect of
orte_output_* and orte_show_help will be identical to their opal
counterparts (the additional information passed to
orte_output_open() will be lost!). Indeed, the orte_* functions
simply become trivial wrappers to their opal_* counterparts. Note
that we have not tested this; the code is simple but it is quite
possible that we mucked something up.
= Filter Framework =
Messages sent view the new orte_* functions described above and
messages output via the IOF on the HNP will now optionally be passed
through a new "filter" framework before being output to
stdout/stderr. The "filter" OPAL MCA framework is intended to allow
preprocessing to messages before they are sent to their final
destinations. The first component that was written in the filter
framework was to create an XML stream, segregating all the messages
into different XML tags, etc. This will allow 3rd party tools to read
the stdout/stderr from the HNP and be able to know exactly what each
text message is (e.g., a help message, another OMPI infrastructure
message, stdout from the user process, stderr from the user process,
etc.).
Filtering is not active by default. Filter components must be
specifically requested, such as:
{{{
$ mpirun --mca filter xml ...
}}}
There can only be one filter component active.
= New MCA Parameters =
The new functionality described above introduces two new MCA
parameters:
* '''orte_base_help_aggregate''': Defaults to 1 (true), meaning that
help messages will be aggregated, as described above. If set to 0,
all help messages will be displayed, even if they are duplicates
(i.e., the original behavior).
* '''orte_base_show_output_recursions''': An MCA parameter to help
debug one of the known issues, described below. It is likely that
this MCA parameter will disappear before v1.3 final.
= Known Issues =
* The XML filter component is not complete. The current output from
this component is preliminary and not real XML. A bit more work
needs to be done to configure.m4 search for an appropriate XML
library/link it in/use it at run time.
* There are possible recursion loops in the orte_output() and
orte_show_help() functions -- e.g., if RML send calls orte_output()
or orte_show_help(). We have some ideas how to fix these, but
figured that it was ok to commit before feature freeze with known
issues. The code currently contains sub-optimal workarounds so
that this will not be a problem, but it would be good to actually
solve the problem rather than have hackish workarounds before v1.3 final.
This commit was SVN r18434.
VxWorks. Still some issues remaining, I'm sure.
Refs trac:1010
This commit was SVN r15320.
The following Trac tickets were found above:
Ticket 1010 --> https://svn.open-mpi.org/trac/ompi/ticket/1010
VXWorks, for example). Checked with George before committing this to
ensure that nothing broke on Windows -- he said it was ok.
This commit was SVN r14388.
I was running into where if a string in the argument list contains a printf
escape sequence, we would segfault. In particular, I was using opal_output
to print the environment and had something like:
LESSOPEN=|/usr/bin/lesspipe.sh %s
in my environment. So I called opal_output(0, "%s", environ[i]) and
got a segfault because the fprintf tried to expand the %s in the
environment variable
This commit was SVN r12094.
The same treatement will happens on all sub-projects. The .h files
have to be C++ compatibles and all symbols with an external visibility
have to get the {PROJECT}_DECLSPEC in front of the prototype.
This commit was SVN r11340.
