lock -- therefore move the OPAL_THREAD_UNLOCK after
the if-OMPI_ERR_TEMP_OUT_OF_RESOURCE block.
- As mca_rcache_rb_mru_delete is the only setter of rc, move the
error-check right after mca_rcache_rb_mru_delete.
- Removed a few nitty ompi/info/info.h and orte/util/show_help.h
This commit was SVN r20355.
* New "op" MPI layer framework
* Addition of the MPI_REDUCE_LOCAL proposed function (for MPI-2.2)
= Op framework =
Add new "op" framework in the ompi layer. This framework replaces the
hard-coded MPI_Op back-end functions for (MPI_Op, MPI_Datatype) tuples
for pre-defined MPI_Ops, allowing components and modules to provide
the back-end functions. The intent is that components can be written
to take advantage of hardware acceleration (GPU, FPGA, specialized CPU
instructions, etc.). Similar to other frameworks, components are
intended to be able to discover at run-time if they can be used, and
if so, elect themselves to be selected (or disqualify themselves from
selection if they cannot run). If specialized hardware is not
available, there is a default set of functions that will automatically
be used.
This framework is ''not'' used for user-defined MPI_Ops.
The new op framework is similar to the existing coll framework, in
that the final set of function pointers that are used on any given
intrinsic MPI_Op can be a mixed bag of function pointers, potentially
coming from multiple different op modules. This allows for hardware
that only supports some of the operations, not all of them (e.g., a
GPU that only supports single-precision operations).
All the hard-coded back-end MPI_Op functions for (MPI_Op,
MPI_Datatype) tuples still exist, but unlike coll, they're in the
framework base (vs. being in a separate "basic" component) and are
automatically used if no component is found at runtime that provides a
module with the necessary function pointers.
There is an "example" op component that will hopefully be useful to
those writing meaningful op components. It is currently
.ompi_ignore'd so that it doesn't impinge on other developers (it's
somewhat chatty in terms of opal_output() so that you can tell when
its functions have been invoked). See the README file in the example
op component directory. Developers of new op components are
encouraged to look at the following wiki pages:
https://svn.open-mpi.org/trac/ompi/wiki/devel/Autogenhttps://svn.open-mpi.org/trac/ompi/wiki/devel/CreateComponenthttps://svn.open-mpi.org/trac/ompi/wiki/devel/CreateFramework
= MPI_REDUCE_LOCAL =
Part of the MPI-2.2 proposal listed here:
https://svn.mpi-forum.org/trac/mpi-forum-web/ticket/24
is to add a new function named MPI_REDUCE_LOCAL. It is very easy to
implement, so I added it (also because it makes testing the op
framework pretty easy -- you can do it in serial rather than via
parallel reductions). There's even a man page!
This commit was SVN r20280.
* If the accumulate is local, make it short-circuit the request path. Accumulate requires local
ops due to its window rules, so this is likely to help a bunch (on the codes I"m messing
with at least)
* Due a better job at flushing everything that can go out on the wire in a resource constrained problem
* Move some debugging values around to make large problems somewhat easier to deal with
This commit was SVN r20277.
to grow to. Without this change, jobs with np>120 get errors.
This does not change anything for np<16 jobs. It only comes into
play with larger np count on a node. I imagine that this can be
scaled back in the future if the usage of memory in the sm
btl is improved.
This fixes trac:1449.
This commit was SVN r20230.
The following Trac tickets were found above:
Ticket 1449 --> https://svn.open-mpi.org/trac/ompi/ticket/1449
* Don't overwrite the des_flags field, removing the
all important always callback field
* Fix up return status of bml_base_send, since
the rest of the code expects OMPI_SUCCESS or
an error code
This commit was SVN r20178.
components to use. This code was rendered obsolete (albiet harmless)
by the MCA base improvements that only open the components that were
specified by each framework's MCA parameter.
This commit was SVN r20176.
The problem was that we doubly decremented the active count on blocking receives that we stall to complete. This moved the active count into the negative. With a negative count for 'active' a message that should have been accounted for would be over looked. This then causes the bookmark exchange to post a drain for a message that was never posted, thus locking the protocol. By eliminating the decrement on the 'active' count when we attempt to post the drain message, we only the decrement this counter when the outstanding blocking recv completes during the stall operation.
Refs trac:1619
Does not close this ticket since there is an outstanding potential problem with ANY_SOURCE and ANY_TAG, as referenced in the ticket.
This should be moved to v1.3
This commit was SVN r20147.
The following Trac tickets were found above:
Ticket 1619 --> https://svn.open-mpi.org/trac/ompi/ticket/1619
problem seems to come from the free list, but due to lack of time to
understand it completely, I provide this fix. Basically, there is no
waiting in the MX BTL anymore, if we cannot allocate a fragment we
rely on the PML to take the corrective actions.
This commit was SVN r20124.
1. minor modification to include two new opal MCA params:
(a) opal_profile: outputs what components were selected by each framework
currently enabled for most, but not all, frameworks
(b) opal_profile_file: name of file that contains profile info required
for modex
2. introduction of two new tools:
(a) ompi-probe: MPI process that simply calls MPI_Init/Finalize with
opal_profile set. Also reports back the rml IP address for all
interfaces on the node
(b) ompi-profiler: uses ompi-probe to create the profile_file, also
reports out a summary of what framework components are actually
being used to help with configuration options
3. modification of the grpcomm basic component to utilize the
profile file in place of the modex where possible
4. modification of orterun so it properly sees opal mca params and
handles opal_profile correctly to ensure we don't get its profile
5. similar mod to orted as for orterun
6. addition of new test that calls orte_init followed by calls to
grpcomm.barrier
This is all completely benign unless actively selected. At the moment, it only supports modex-less launch for openib-based systems. Minor mod to the TCP btl would be required to enable it as well, if people are interested. Similarly, anyone interested in enabling other BTL's for modex-less operation should let me know and I'll give you the magic details.
This seems to significantly improve scalability provided the file can be locally located on the nodes. I'm looking at an alternative means of disseminating the info (perhaps in launch message) as an option for removing that constraint.
This commit was SVN r20098.
of more than one of the btl_openib_if_include, btl_openib_if_exclude,
btl_openib_ipaddr_include, or btl_openib_ipaddr_exclude MCA parameters.
This commit was SVN r20053.
determining which IP address to use when transmitting data. Also it adds logic
to prevent usage of more than one of the btl_openib_if_include,
btl_openib_if_exclude, btl_openib_ipaddr_include, or btl_openib_ipaddr_exclude
MCA parameters.
This should complete the code modifications needed for ticket 1665.
This commit was SVN r20052.
1. fix a bug in pml_ob1_recvreq/sendreq.c, buffer was made defined where the request has already been released.
2. complete memchecker support for collective functions.
3. change the wrongly spelled function name of memchecker, i.e. '*_isaddressible' should be '*_isaddressable'
This commit was SVN r20043.
determing of the IP subnet. The netmask was being used improperly when
determining which subnet each connection is on. Part two is the ability to
include/exclude specific subnets.
This patch fixes ticket #1665
This commit was SVN r20016.
memory hooks (munmap) and initialize the mallopt component, and
nothing else.
Use this mpool in the MX common initialization, supporting both BTL
and MTL. Automatically set the MX_RCACHE environment variable to
enable registration cache in MX.
Tested with success for munmap() and large free().
This commit was SVN r20003.
* If max_inline_data == -1 perform runtime detection
* If max_inline_data >=0 use the value provided
* If the user does not explicitly set this via command line, use the value from INI file
This commit fixes trac:1662
This commit was SVN r19995.
The following Trac tickets were found above:
Ticket 1662 --> https://svn.open-mpi.org/trac/ompi/ticket/1662
This will sit in trunk for a few days - would like to actually see some errors reported to syslog before moving the code to 1.3
This commit was SVN r19986.
another bug. This also causes 0-byte requests to be treated as a buffer
error, causing the base request to be requeued. On Cray XT, it may be
temporarily impossible to make allocations for buffer requests, as the
default stack size is small (8 MB) and there is no true swap device.
Even with the stack size increased, there will be cases in which this
condition recurs.
One possibility is to make the buffer allocations off of the heap; but,
this does not change the fact that eventually an out-of-memory condition
will occur and we need to support multiple receives in transit, a
condition for which the available buffer space may change. On the other
hand, if we switch to allocating the buffer space from the heap, we will
need to return an error when the allocation fails and there are no other
buffers in transit.
This commit was SVN r19981.
It highlighted a bug in the bookmark component where for persistent sends we were not copying the context, but just moving it. This caused us to lose track of the message if it is started/completed multiple times.
This will need to be brought over to the v1.3 branch, but it should soak overnight to get a round of testing first.
This commit was SVN r19962.
parameters on the connecting side also. Also move define of IF_NAMESIZE
into if.h file. And lastly, add one verbose debug message which may be
useful if we run into other issues like this.
This commit fixes trac:1573.
This commit was SVN r19932.
The following Trac tickets were found above:
Ticket 1573 --> https://svn.open-mpi.org/trac/ompi/ticket/1573
I'm unable to split it in two parts, my patch and Edgar's one. So I just update
copyright information for both of us.
What this patch do:
- it use the unexpected queue create by commit r19562 to dispatch the
unexpected message to the right communicator (once this communicator
is created and initialized).
- delay the PML comm_add until we have the context_id for the new communicator.
- only do the PML comm_add on processes that really belong to the new
communicator. Please read the lengthy comment in the source code for the
reason behind this.
This commit was SVN r19929.
The following SVN revision numbers were found above:
r19562 --> open-mpi/ompi@acd3406aa7
in case of failure more user friendly. In addition we now fully integrate
with the MX_BONDING features (i.e the multi-rails bonding can be done either
at the PML OB1 level, or deep down in the MX library). This feature is driven
by the btl_mx_bonding MCA parameter.
Plus some extra features:
- Correctly compute the bandwidth in case of bonding.
- Nicely handle any mapper access errors.
This commit was SVN r19874.
<infiniband/driver.h> cannot be included because it will fail to
compile. So per advice from Roland, in that case, just put manually
include the one ibv_*() prototype that we need. Use an undocumented
feature of AC_CHECK_HEADERS to check for <infiniband/driver.h> that I
was told on the autoconf mailing list (see the comment for more
details).
This commit was SVN r19857.
We were only allocating one whereas we would typically need
one per interface. Most of the time we got lucky and we
happily trundled over unallocated memory. But with enough
interfaces, we would get a SEGV.
Also add include to fix compilation with static libs.
This commit was SVN r19845.
THREAD_MULTIPLE. There's a new (hidden) MCA parameter to re-enable
these BTLs in the presence of THREAD_MULTIPLE:
btl_base_thread_multiple_override. This MCA parameter should ''only''
be used by developers who are working on make their BTLs thread safe;
it should ''not'' be used by end-users!
This commit was SVN r19826.
The following Trac tickets were found above:
Ticket 1588 --> https://svn.open-mpi.org/trac/ompi/ticket/1588
We had a public symbol named "already_opened". This commit changes
the name to mca_btl_base_already_opened.
I guess it's good we have the visibility stuff enabled by default!
:-)
This commit was SVN r19791.
1. Allow MX bonding via btl_mx_bonding MCA parameter. With this on, Open MPI
suppose that lib MX will do the bonding, and we will only return one BTL.
Otherwise, we return as many as devices.
2. Decrease the memory footprint, by cleaning up what we store about the
peers and how we store it.
3. Allow multiple MX routes that share the same mapper. In this particular
case we will link by their nic_id.
4. Allow multiple MX routes with multiple mappers. In this case we match
the NICs based on the last 6 digits of the mapper MAC.
5. Increase the size of the eager and rendez-vous eager limits in the
case where we are unable to register an unexpected callback with MX.
6. Increase the default max number of MX fragments.
7. Increase the max number of MX BTLs.
8. Only allow mx_if_include and mx_if_exclude if we have acess to the
mapper.
This commit was SVN r19788.
1. completely and cleanly separates responsibilities between the HNP, orted, and tool components.
2. removes all wireup messaging during launch and shutdown.
3. maintains flow control for stdin to avoid large-scale consumption of memory by orteds when large input files are forwarded. This is done using an xon/xoff protocol.
4. enables specification of stdin recipients on the mpirun cmd line. Allowed options include rank, "all", or "none". Default is rank 0.
5. creates a new MPI_Info key "ompi_stdin_target" that supports the above options for child jobs. Default is "none".
6. adds a new tool "orte-iof" that can connect to a running mpirun and display the output. Cmd line options allow selection of any combination of stdout, stderr, and stddiag. Default is stdout.
7. adds a new mpirun and orte-iof cmd line option "tag-output" that will tag each line of output with process name and stream ident. For example, "[1,0]<stdout>this is output"
This is not intended for the 1.3 release as it is a major change requiring considerable soak time.
This commit was SVN r19767.
There is still a problem with OpenIB and threads (external to C/R functionality). It has been reported in Ticket #1539
Additionally:
* Fix a file cleanup bug in CRS Base.
* Fix a possible deadlock in the TCP ft_event function
* Add a mca_base_param_deregister() function to MCA base
* Add whole process checkpoint timers
* Add support for BTL: OpenIB, MX, Shared Memory
* Add support Mpool: rdma, sm
* Sundry bounds checking an cleanup in some scattered functions
This commit was SVN r19756.
I run IMB exchange on two QS22 machines with r19674 and it got stucked after 256 or 512 bytes every time.
After applying r19717 the test passed, so I guess this is a essential patch.
This commit was SVN r19752.
The following SVN revision numbers were found above:
r19674 --> open-mpi/ompi@15c47a2473
r19717 --> open-mpi/ompi@0a765cd788
We still do an interreduce but it is now followed by an intrascatterv.
This fixes trac:1554.
This commit was SVN r19723.
The following Trac tickets were found above:
Ticket 1554 --> https://svn.open-mpi.org/trac/ompi/ticket/1554
following names are all new for v1.3, and therefore haven't been
officially released yet:
* btl_openib_of_cq_size
* btl_openib_of_max_inline_data
* btl_openib_of_pkey
* btl_openib_of_psn
* btl_openib_of_mtu
The "_of_" (for OpenFabrics) in there is redundant. It used to be
"_ib_", indicating that these values are pretty much passed directly
to the verbs stack. But I think the "openib" in the name implies this
already; having "_of_" in there just seems redundant, makes the name
longer, and seems redundant. It's also redundant.
So I took those "_of_"'s out of the MCA names. The old (v1.2) names
are still valid (but deprecated), such ash btl_openib_ib_cq_size.
This commit was SVN r19718.
* Change name: mca_btl_openib_of_pkey_value -> mca_btl_openib_of_pkey
(since now there's no index, the "_value" suffix is somewhat
superfluous)
* Put in a better help message for the _pkey MCA param (to agree with
the new help message in v1.2.8)
This commit was SVN r19716.
Commit from a long-standing Mercurial tree that ended up incorporating a lot of things:
* A few fixes for CPC interface changes in all the CPCs
* Attempts (but not yet finished) to fix shutdown problems in the IB CM CPC
* #1319: add CTS support (i.e., initiator guarantees to send first message; automatically activated for iWARP over the RDMA CM CPC)
* Some variable and function renamings to make this be generic (e.g., alloc_credit_frag became alloc_control_frag)
* CPCs no longer post receive buffers; they only post a single receive buffer for the CTS if they use CTS. Instead, the main BTL now posts the main sets of receive buffers.
* CPCs allocate a CTS buffer only if they're about to make a connection
* RDMA CM improvements:
* Use threaded mode openib fd monitoring to wait for for RDMA CM events
* Synchronize endpoint finalization and disconnection between main thread and service thread to avoid/fix some race conditions
* Converted several structs to be OBJs so that we can use reference counting to know when to invoke destructors
* Make some new OBJ's have opal_list_item_t's as their base, thereby eliminating the need for the local list_item_t type
* Renamed many variables to be internally consistent
* Centralize the decision in an inline function as to whether this process or the remote process is supposed to be the initiator
* Add oodles of OPAL_OUTPUT statements for debugging (hard-wired to output stream -1; to be activated by developers if they want/need them)
* Use rdma_create_qp() instead of ibv_create_qp()
* openib fd monitoring improvements:
* Renamed a bunch of functions and variables to be a little more obvious as to their true function
* Use pipes to communicate between main thread and service thread
* Add ability for main thread to invoke a function back on the service thread
* Ensure to set initiator_depth and responder_resources properly, but putting max_qp_rd_ataom and ma_qp_init_rd_atom in the modex (see rdma_connect(3))
* Ensure to set the source IP address in rdma_resolve() to ensure that we select the correct OpenFabrics source port
* Make new MCA param: openib_btl_connect_rdmacm_resolve_timeout
* Other improvements:
* btl_openib_device_type MCA param: can be "iw" or "ib" or "all" (or "infiniband" or "iwarp")
* Somewhat improved error handling
* Bunches of spelling fixes in comments, VERBOSE, and OUTPUT statements
* Oodles of little coding style fixes
* Changed shutdown ordering of btl; the device is now an OBJ with ref counting for destruction
* Added some more show_help error messages
* Change configury to only build IBCM / RDMACM if we have threads (because we need a progress thread)
This commit was SVN r19686.
The following Trac tickets were found above:
Ticket 1210 --> https://svn.open-mpi.org/trac/ompi/ticket/1210
got a whole lot smaller, decreasing the memory footprint of the
running application. How much it's a good question. Here is a
breakdown:
- in mca_bml_base_endpoint_t: 3 *size_t + 1 * uint32_t
- in mca_bml_base_btl_t: 1 * int + 1 * double - 1 * float
+ 6 * size_t + 9 * (void*)
The decrease in mca_bml_base_endpoint_t is for each peer and the
decrease in mca_bml_base_btl_t is for each BTL for each peer.
So, if we consider the most convenient case where there is only
one network between all peers, this decrease the memory foot print
per peer by
9*size_t + 9*(void*) + 2 * int32_t + 1 * double - 1 * float.
On a 64 bits machine this will be 156 bytes per peer.
Now we access all these fields directly from the underlying BTL
structure, and as this structure is common to multiple BML endpoint,
we are a lot more cache friendly. Even if this do not improve the
latency, it makes the SM performance graph a lot smoother.
This commit was SVN r19659.
There was an argument that was barely used, and on return at the PML
level it contained nothing usable. It has been removed, so now we're
using less memory ...
This commit was SVN r19657.
(related to the presence of posix threads and ptmalloc2) is now a
little outdated: since we don't build ptmalloc2 as part of libopal
anymore, the openib BTL's requirements are not directly tied to
ptmalloc2's anymore. Specifically, I altered the test to:
1. At compile time, if no threads are found, the ptmalloc2 component
is going to be built, '''and the ptmalloc2 component is going to be
inside libopal,''' then refuse to build the openib BTL.
1. At run time, if no threads were available at compile time and the
ptmalloc2 component is part of the process, then refuse to use the
openib BTL.
Fixes trac:1537.
This commit was SVN r19652.
The following Trac tickets were found above:
Ticket 1537 --> https://svn.open-mpi.org/trac/ompi/ticket/1537
Thanks to George and Jeff for pointing out a better way to do this.
This commit was SVN r19573.
The following SVN revision numbers were found above:
r19566 --> open-mpi/ompi@351c3a3a86
figure it out at runtime (really meaning: we'll still default to "0"
unless something explicitly overrides to 1, such as the openib BTL).
This way, ompi_info doesn't confusingly report mpi_leave_pinned==0 for
mpi_leave_pinned, but we end up running with mpi_leave_pinned==1.
Fixes trac:1502.
This commit was SVN r19571.
The following Trac tickets were found above:
Ticket 1502 --> https://svn.open-mpi.org/trac/ompi/ticket/1502
remove the unconditional opal_output's when mmap() fails, and instead,
conditionally output the failure message via btl_base_verbose settings.
This commit was SVN r19547.
The new component fixes a number of problems with the old component. The core algorithm is the same, but by changing the data strucutres a bit we have improved performance and memory utilization.
There are still a couple corner cases that still need some work. However, I did not want to delay bringing this into the trunk (and v1.3 branch) for too much longer.
This commit was SVN r19537.
checking for contiguous datatypes by using our native DDT engine
(rather than several MPI_* calls). The majority of the work is in the
IO ROMIO module.c file, but there's a small part in
adio/common/iscontig.c that we're also submitting upstream.
This commit was SVN r19509.
mostly don't use this mechanism, as we have to be thread safe in order to
really take full advantage of it. The unexpected handler is called by one
of th MX threads, and we do not have control on the moment. In a non threaded
case, this will completely destroy our recv requests queues, so the safest
approach is to don't the unexpected handler.
This commit was SVN r19496.
way".
Don't modify coords in the top-level API function because coords is an
IN variable. Instead, as Nysal noted, the real cause of the problem
was a missing ! down in topo_base_cart_rank.c. Put a comment down in
topo_base_cart_rank.c explaining what's going on so that the code is
not so cryptic.
Refs trac:1363.
This commit was SVN r19487.
The following Trac tickets were found above:
Ticket 1363 --> https://svn.open-mpi.org/trac/ompi/ticket/1363
* Various changes to enable 0-dimensional cartesian communicators:
* Set various mtc_* members to NULL when there are 0 dimensions (and
don't bother trying to memcpy these arrays when duplicating the
communicator -- because they're NULL)
* adjust topo_base_cart_sub to correctly handle 0 dimensions
(simplified it a bit)
* adjust a few error codes to return ERR_OUT_OF_RESOURCE
* adjust error checking of CART_CREATE, CART_RANK
* Allow MPI_GRAPH_CREATE to accept 0 == nnodes.
* Bump reported MPI version in mpi.h to 2.1
This commit was SVN r19461.
The following Trac tickets were found above:
Ticket 1236 --> https://svn.open-mpi.org/trac/ompi/ticket/1236
guarantee local progress, my opinion is we don't need to do anything
special for complete sends. Perhaps I'm wrong on that one, in which
case this implementation of send_complete is not quite right.
* Give a slightly better error message when a catchall is hit, so that
we can at least know *which* catchall is hit.
This commit was SVN r19456.
See opal/mca/paffinity/paffinity.h for explanation as to the physical vs logical nature of the params used in the API.
Fixes trac:1435
This commit was SVN r19391.
The following Trac tickets were found above:
Ticket 1435 --> https://svn.open-mpi.org/trac/ompi/ticket/1435
2. fix a bug in the initial communicator creation of llcomm
3. fix a bug which showed up as the result of fixing issue number 2: we have
to check now whether llcomm has really be created before freeing the
according llcomm in hierarch_destruct.
This commit was SVN r19361.
generate an overlap between the different layers. Why four versions? Because
there is right now always the trade-off between using non-blocking operations
on a layer with a trivial, linear algorithm and using the more sophisticaed
algorithms in a blocking manner.
- bcast_intra_seg used the bcast of lcomm and llcomm, similarly
to original algorithm in hierarch. However, it can segment
the message, such that we might get an overlap between the two
layers. This overlap is based on the assumption, that a process
might be done early with a bcast and can start the next one.
- bcast_intra_seg1: replaces the llcomm->bcast by isend/irecvs
to increase the overlap, keeps the lcomm->bcast however
- bcast_intra_seg2: replaced lcomm->bcast by isend/irecvs
to increase the overlap, keeps however llcomm->bcast
- bcast_intra_seg3: replaced both lcomm->bcast and llcomm->bcast
by isend/irecvs
The code is lightly tested, more testing to follow right now.
This commit was SVN r19358.
Roland noticed that the QLogic HCA driver was using the PCIe vendor ID
for the ibv_query_device so the IEEE OUI value is now used. This means
the config file should recognize the vendor ID value 0x1175 too.
This commit was SVN r19277.
* Make the creation of the build dir for the man pages a bit more
robust (thanks to suggestions from Ralf W.).
* Only distribute the .Xin files, not the .X man pages themselves.
* Make the .X files depend on opal_config.h so that if you re-run
configure and change opal_config.h (e.g., a new version), the man
pages should get rebuilt.
* Man pages are now cleaned with "distclean", not "maintainer-clean".
* Fix a typo in opal_crs.7in.
* Udpate make_dist_tarball to update "date" in the VERSION file.
* Make make_dist_tarball a bit friendlier to hg checkouts.
This commit was SVN r19219.
This is setup so that it only is issued once (as opposed to every time they do it), and goes through orte_show_help so the user doesn't get hammered by #procs copies of the warning. In addition, there is a new MCA param (can't have too many!) to shut the warning off altogether.
This closes ticket #1244
This commit was SVN r19196.
(it is just set within MCA_PML_OB1_RECV_REQUEST_UNPACK)
Iff Coverity's prevent makes usage of __attribute__(unused),
this should get rid of warning.
Relates to CID1060
Would then apply to a many int _rc; definitions, that are
used in other macros in similar fashion...
This commit was SVN r19179.
Revise the scope precedence in the MPI_Publish, Unpublish, and Lookup functions. If a global server was specified and is available, then default to using it for all three functions. If not, then default to using local scope.
If an info_key was provided, then it takes preference. We always follow the user's direction - this change only impacts the scope ordering if the user -doesn't- tell us the order to use.
This commit was SVN r19146.
versions, dates and build names.
Fixes trac:1387
Big thanks to Jeff and Brian for help and oversight.
This commit was SVN r19120.
The following Trac tickets were found above:
Ticket 1387 --> https://svn.open-mpi.org/trac/ompi/ticket/1387
that by decreasing the btl_inuse if there was already a registered BTL we basically reset
the changes for this new BTL to register it's progress function, even if it was supposed to
handle another peer.
This commit was SVN r19080.
* add "register" function to mca_base_component_t
* converted coll:basic and paffinity:linux and paffinity:solaris to
use this function
* we'll convert the rest over time (I'll file a ticket once all
this is committed)
* add 32 bytes of "reserved" space to the end of mca_base_component_t
and mca_base_component_data_2_0_0_t to make future upgrades
[slightly] easier
* new mca_base_component_t size: 196 bytes
* new mca_base_component_data_2_0_0_t size: 36 bytes
* MCA base version bumped to v2.0
* '''We now refuse to load components that are not MCA v2.0.x'''
* all MCA frameworks versions bumped to v2.0
* be a little more explicit about version numbers in the MCA base
* add big comment in mca.h about versioning philosophy
This commit was SVN r19073.
The following Trac tickets were found above:
Ticket 1392 --> https://svn.open-mpi.org/trac/ompi/ticket/1392
have/need lseek64" issue. This fix is also included in MPICH2 after
v1.0.7.
This commit was SVN r19070.
The following Trac tickets were found above:
Ticket 1419 --> https://svn.open-mpi.org/trac/ompi/ticket/1419
SVN version (r19045), but I also edited the svn:ignore to ignore these
files in the same SVN commit -- I suspect that SVN got confused and
did not actually delete them.
This commit was SVN r19048.
The following SVN revision numbers were found above:
r19045 --> open-mpi/ompi@63b63d48c3
Update the version of ROMIO to that which was contained in
MPICH2-1.0.7, plus a few patches from the upstream ROMIO maintainers
(because OMPI uses a few code paths in ROMIO that MPICH2 does not;
there were a few compile bugs in the ROMIO from MPICH2-1.0.7).
Added an info MCA param to be able to tell which version of ROMIO is
contained in OMPI: io_romio_version.
Many, many thanks to romio-maint@mcs.anl.gov for all their help in
integrating this new version of ROMIO into Open MPI.
This commit was SVN r19045.
The following Trac tickets were found above:
Ticket 1370 --> https://svn.open-mpi.org/trac/ompi/ticket/1370
* Use synonym/deprecated MCA param API for some mca base params
* In openib BTL, if we have appropriate memory hooks support, and if
mpi_leave_pinned and mpi_leave_pinned_pipeline were not set by the
user, set mpi_leave_pinned to 1.
* Defer checking mpi_leave_pinned_* until as late as possible (i.e.,
until after the btl's have had a chance to set mpi_leave_pinned to
1):
* in ob1 pml
* in rdma mpool
This commit was SVN r19022.
The following Trac tickets were found above:
Ticket 1379 --> https://svn.open-mpi.org/trac/ompi/ticket/1379
a little bit more than "BTL was able to add some procs". The real condition to
allow the BTL progress is that we will use it to send/recv data to/from some
of the peers (this include the BTL exclusivity in the process).
This commit was SVN r19010.
"!OpenFabrics" / neutral (i.e., refer to IB and/or iWARP).
* Mostly just type, variable/field, and funcion name changes, such as
s/hca/device/g, etc.
* Changed the INI file for the hardware-specific parameters to be
mca-btl-openib-device-params.ini.
* Updated a lot of help messages in the help-*.txt files, not just to
update it to be !OpenFabrics/neutral language, but also for some
consistency of tone, indenting, etc.
* Deprecated a bunch of MCA params in favor of language-neutral new
ones:
* btl_openib_warn_no_hca_params_found (s/hca/device/)
* btl_openib_hca_param_files
* btl_openib_ib_cq_size (s/_ib_/_of_/)
* btl_openib_ib_max_inline_data
* btl_openib_ib_psn
* btl_openib_ib_mtu
* btl_openib_ib_pkey_ix
* btl_openib_ib_pkey_val
This commit was SVN r18985.
The following Trac tickets were found above:
Ticket 1295 --> https://svn.open-mpi.org/trac/ompi/ticket/1295
The rdmacm event handler has no way of reporting fatal errors to the upper
layers. By calling mca_btl_openib_endpoint_invoke_error in the rdmacm event
handler for the errors encountered, these errors can now be handled
appropriately.
Closes out Ticket #1283
This commit was SVN r18980.
If IBCM was explicitly specified with exclude/include parameter,
OpenIB BTL will enable verbose report for "/dev/infiniband/ucm" error,
other way the error will not be reported.
This commit was SVN r18868.
first to the trunk. So, here is the trunk checkin:
The call to orte_show_help() to notify truncation of the max_inline value
was missing the want_error_header boolean, which eventually results in
a SEGV. This change corrects the call with the bool set to true.
This commit was SVN r18839.
see how the next gen panasas stuff does in terms of warnings; we can
always re-merge this later if we want to. It's just easier if we have
as little OMPI-specific code as possible (particularly when we know
that the panasas code has some big changes coming).
This commit was SVN r18823.
The following SVN revision numbers were found above:
r17543 --> open-mpi/ompi@b4ec81a9fd
already, and we're just about to do a ROMIO version refresh -- so the
less OMPI-specific code we have (e.g., indenting and whatnot), the
better.
Refs trac:1370.
This commit was SVN r18821.
The following SVN revision numbers were found above:
r16691 --> open-mpi/ompi@8dca19cb3b
r16693 --> open-mpi/ompi@037a533752
The following Trac tickets were found above:
Ticket 1370 --> https://svn.open-mpi.org/trac/ompi/ticket/1370
ROMIO in Open MPI (the new version of ROMIO will make this patch
defunct, and David Daniel has confirmed that no one at LANL is using
this functionality, anyway).
Refs trac:1370.
This commit was SVN r18819.
The following Trac tickets were found above:
Ticket 1370 --> https://svn.open-mpi.org/trac/ompi/ticket/1370
hierarch disables itself now if the pml module used is *not* ob1. The reason
is, that the multi-level hierarchy detection algorithm checks the names of the
btl modules used. In case there are no btl's, we would segfault.
Furthermore, three minor changes:
- the 2-level hierarchy detection is now the default (sm vs. everything else
in the world).
- add udapl to the list of protocols checked for by the multi-level hierarch detection
- some of the verbose statements of hierarch were inaccurate. Fixed those comments/messages.
This commit was SVN r18817.
1. repair of the linear and direct routed modules
2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI
3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature
4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes.
Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB
5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept.
Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules.
6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch
7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch
8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies
9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc.
10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon
There is still more cleanup to be done for efficiency, but this at least works.
Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn.
Fixes ticket #1256
This commit was SVN r18804.
* Move the passive side QP move to RTS to before we send the reply
(vs. sending it after we get the RTU). A lengthy comment explains
the need for this.
* Add some timers to the code for analyzing where time is spent.
* Clarify a few error messages.
* Currently have a loop around ib_cm_listen() because sometimes it
fails for seeminly no reason. Have pending e-mails in to Sean
Hefty to see if we can figure out why this is happening. Note that
the more MPI processes you add, the more likely this error is to
occur (e.g., ran 720 processes and it happens at least 50% of the
time). This makes IBCM somewhat unattractive for general use;
hopefully we can get a fix...
This commit was SVN r18766.
endpoint.c) because it's almost identical in all the CPC's. OOB,
XOOB, and IBCM now all invoke the btl error handler properly if
there's an error during wireup. RDMACM still needs to be done.
This commit was SVN r18764.
The following SVN revision numbers were found above:
r18762 --> open-mpi/ompi@3eda04578f
