Among many other things:
- Fix an imbalance bug in MPI_allgather
- Accept more human readable configuration files. We can now specify
the collective by name instead of a magic number, and the component
we want to use also by name.
- Add the capability to have optional arguments in the collective
communication configuration file. Right now the capability exists
for segment lengths, but is yet to be connected with the algorithms.
- Redo the initialization of all HAN collectives.
Cleanup the fallback collective support.
- In case the module is unable to deliver the expected result, it will fallback
executing the collective operation on another collective component. This change
make the support for this fallback simpler to use.
- Implement a fallback allowing a HAN module to remove itself as
potential active collective module, and instead fallback to the
next module in line.
- Completely disable the HAN modules on error. From the moment an error is
encountered they remove themselves from the communicator, and in case some
other modules calls them simply behave as a pass-through.
Communicator: provide ompi_comm_split_with_info to split and provide info at the same time
Add ompi_comm_coll_preference info key to control collective component selection
COLL HAN: use info keys instead of component-level variable to communicate topology level between abstraction layers
- The info value is a comma-separated list of entries, which are chosen with
decreasing priorities. This overrides the priority of the component,
unless the component has disqualified itself.
An entry prefixed with ^ starts the ignore-list. Any entry following this
character will be ingnored during the collective component selection for the
communicator.
Example: "sm,libnbc,^han,adapt" gives sm the highest preference, followed
by libnbc. The components han and adapt are ignored in the selection process.
- Allocate a temporary buffer for all lower-level leaders (length 2 segments)
- Fix the handling of MPI_IN_PLACE for gather and scatter.
COLL HAN: Fix topology handling
- HAN should not rely on node names to determine the ordering of ranks.
Instead, use the node leaders as identifiers and short-cut if the
node-leaders agree that ranks are consecutive. Also, error out if
the rank distribution is imbalanced for now.
Signed-off-by: Xi Luo <xluo12@vols.utk.edu>
Signed-off-by: Joseph Schuchart <schuchart@icl.utk.edu>
Signed-off-by: George Bosilca <bosilca@icl.utk.edu>
Add a line that was accidentally left out that includes the generated
nroff pages (from the Markdown pages) in the dist tarball.
The lack of these files in the dist tarball was causing configure to
fail a test and therefore conclude that we need to have pandoc
installed. Put differently: it's a specific goal that we do not want
end users to have to have Pandoc installed -- all Markdown files must
generate their nroff equivalents and have those nroff files included
in the distribution tarball.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
The current iprobe/improbe implementations merely checks the return
code on the posted receive operation to tell if there is a match or
not. This commit moves the check to the probe's error callback
instead. Per the semantics defined in libfabric, the peek operation is
asynchronous and the results are to be fetched from the completion
queue. If no message is found matching the tags specified in the peek
request, then a completion queue error entry with err field set to
FI_ENOMSG will be available.
Signed-off-by: Raghu Raja <craghun@amazon.com>
In multi-threaded scenarios, any thread that attempts to read a CQ
when there's a pending error CQ entry gets an -FI_EAVAIL. Without
any serialization here (which is okay, since libfabric will protect
access to critical CQ objects), all threads proceed to read from the
error CQ, but only one thread fetches the entry while others get
-FI_EAGAIN indicating an empty queue, which is not erroneous.
Signed-off-by: Raghu Raja <craghun@amazon.com>
Environments are supposed to provide the PMIX_NODE_RANK - if they don't,
we can probably safely assume the same as local rank. Protect against a
few other values that might not be provided.
Signed-off-by: Ralph Castain <rhc@pmix.org>
* first import of Bull specific modifications to HAN
* Cleaning, renaming and compilation fixing Changed all future into han.
* Import BULL specific modifications in coll/tuned and coll/base
* Fixed compilation issues in Han
* Changed han_output to directly point to coll framework output.
* The verbosity MCA parameter was removed as a duplicated of coll verbosity
* Add fallback in han reduce when op cannot commute and ppn are imbalanced
* Added fallback wfor han bcast when nodes do not have the same number of process
* Add fallback in han scatter when ppn are imbalanced
+ fixed missing scatter_fn pointer in the module interface
Signed-off-by: Brelle Emmanuel <emmanuel.brelle@atos.net>
Co-authored-by: a700850 <pierre.lemarinier@atos.net>
Co-authored-by: germainf <florent.germain@atos.net>
a hierarchical, architecture-aware collective communication module.
Add Reduce and remove up_seg_size and low_seg_size in Bcast
Increase HAN's priority
Signed-off-by: Xi Luo <xluo12@vols.utk.edu>
Signed-off-by: George Bosilca <bosilca@icl.utk.edu>
Made a couple vars static if they didn't look like they were used
more than one place, and added prefixes to a few.
Signed-off-by: Mark Allen <markalle@us.ibm.com>
With Open MPI 5.0, the decision was made to stop building
3rd-party packages, such as Libevent, HWLOC, PMIx, and PRRTE as
MCA components and instead 1) start relying on external libraries
whenever possible and 2) Open MPI builds the 3rd party
libraries (if needed) as independent libraries, rather than
linked into libopen-pal.
This patch moves the hwloc library bundled with Open MPI from a
MCA framework to a stand-alone library built outside of OPAL. Due
to the amount of code in the MCA base (and its assumptions about
being part of an MCA framework), the framework is left with no
active components. Any pre-installed version of HWLOC 1.6 or
newer is preferred over the internal version.
Signed-off-by: Brian Barrett <bbarrett@amazon.com>
With Open MPI 5.0, the decision was made to stop building
3rd-party packages, such as Libevent, HWLOC, PMIx, and PRRTE as
MCA components and instead 1) start relying on external libraries
whenever possible and 2) Open MPI builds the 3rd party
libraries (if needed) as independent libraries, rather than
linked into libopen-pal.
This patch moves libevent from an MCA framework to a stand-alone
library built outside of OPAL. A wrapper in opal/util is provided
to minimize the unnecessary changes in the rest of the code. When
using the internal Libevent, it will be installed as a stand-alone
libevent.a, instead of bundled in OPAL. Any pre-installed version
of Libevent at or after 2.0.21 is preferred over the internal
version.
Signed-off-by: Brian Barrett <bbarrett@amazon.com>
mca_pml_ob1_recv_request_put_frag is used to request a put from the peer if get fails
mca_pml_ob1_recv_request_ack_send_btl is used to send an acknowledgement, not data
Signed-off-by: Joseph Schuchart <schuchart@icl.utk.edu>
- Add support for fallback to previous coll module on non-commutative operations (#30)
- Replace mutexes by atomic operations.
- Use the correct nbc request type (for both ibcast and ireduce)
* coll/base: document type casts in ompi_coll_base_retain_*
- add module-wide topology cache
- use standard instead of synchronous send and add mca parameter to control mode of initial send in ireduce/ibcast
- reduce number of memory allocations
- call the default request completion.
- Remove the requests from the Fortran lookup conversion tables before completing
and free it.
Signed-off-by: George Bosilca <bosilca@icl.utk.edu>
Signed-off-by: Joseph Schuchart <schuchart@hlrs.de>
Co-authored-by: Joseph Schuchart <schuchart@hlrs.de>
The upper 2 bits of an ompi tag encode the synchronize send and
synchronize send ack.
Because the mtl_ofi_create_recv_tag_CQD and mtl_ofi_create_recv_tag
functions both use ompi_mtl_ofi.sync_proto_mask instead of
ompi_mtl_ofi.sync_send when generating their "ignore" masks, they hide
the ack bit, turning the tag into an "any tag receive"
This is an issue because ssend is implemented by doing a send and
receive internally. So if there happens to be an outstanding posted
receive posted before the ssend, that receive will end up consuming the
internal message intended for the ssend's internal receive.
Updating mtl_ofi_create_recv_tag_CQD and mtl_ofi_create_recv_tag functions
to use ompi_mtl_ofi.sync_send fixes this.
Authored-by: John L. Byrne <john.l.byrne@hpe.com>
Signed-off-by: Harumi Kuno <harumi.kuno@hpe.com>
Convert the MPI_Status_f082f, MPI_Status_f082c, and MPI_Status_f2c man
pages to Markdown. Fix some typos and improve the text a bit along
the way.
Left the raw NROFF redirect pages MPI_Status_f2f08, MPI_Status_c2f08,
and MPI_Status_c2f files as they were -- they're 1-line redirects, and
it seems simpler to leave those (vs. duplicating the Markdown).
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Only in C bindings:
- MPI_Status_c2f08()
- MPI_Status_f082c()
In all bindings but mpif.h
- MPI_Status_f082f()
- MPI_Status_f2f08()
and the PMPI_* related subroutines
As initially inteded by the MPI forum, the Fortran to/from Fortran 2008
conversion subtoutines are *not* implemented in the mpif.h bindings.
See the discussion at https://github.com/mpi-forum/mpi-issues/issues/298
Refs. open-mpi/ompi#1475
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
Make the C MPI_F08_status type definition match the updated
mpi_f08 type(MPI_Status) definition.
This fix the inconsistency introduced in open-mpi/ompi@98bc7af7d4
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
Reduce scatter block and reduce scatter algorithms were hitting
correctness issues for non commutative strided tests. We will revert to
the original default algorithms for those two collectives (basic linear
and non overlapping respectively) in the non commutative op case.
See #8010
Signed-off-by: William Zhang <wilzhang@amazon.com>
As it is possible to have multiple outstanding non-blocking collectives
provided by different collective modules, we need a consistent
mechanism to allow them to select unique tags for each instance of a
collective.
Signed-off-by: George Bosilca <bosilca@icl.utk.edu>
* piggybacking Bull functionalities
* coll/adapt: Fix naming conventions and C11 atomic use
This commit fixes some naming convention issues, such as function names
which should follow the naming ompi_coll_adapt instead of
mca_coll_adapt, reserved for component and module naming (cf. tuned
collective component);
It also fixes the use of _Atomic construct, which is only valid in C11.
OPAL constructs have already been adapted to that use, so use
opal_atomic_* types instead.
* coll/adapt: Remove unused component field in module
This commit removes an unneeded field referencing the component in the
module of adapt, as it is already available through the
mca_coll_adapt_component global variable.
Signed-off-by: Marc Sergent <marc.sergent@atos.net>
Co-authored-by: Lemarinier, Pierre <pierre.lemarinier@atos.net>
Co-authored-by: pierrele <31764860+pierrele@users.noreply.github.com>
