- re-enable sendi
- move smsg common code into btl_ugni_smsg.h
- added new parameters for smsg/eager frags
- use get for frags larger than the smsg_limit
- bug fixes
- code cleanup
This commit was SVN r25897.
Adds a lock to protect the sm pending_sends list from concurrent access
Fixes bug where btl_sm_process_pending_sends would return an item to
the free list and then continue to use it for a little while
cmr:v1.6
This commit was SVN r25878.
The following Trac tickets were found above:
Ticket 2998 --> https://svn.open-mpi.org/trac/ompi/ticket/2998
zeroes);
if so, use it for bit-operations like opal_cube_dim and opal_hibit.
Implement two versions of power-of-two.
In case of opal_next_poweroftwo, this reduces the average execution
time from 83 cycles to 4 cycles (Intel Nehalem, icc, -O2, inlining,
measured rdtsc, with loop over 2^27 values).
Numbers for other functions are similar (but of course heavily depend
on the usage, e.g. opal_hibit() with a start of 4 does not save
much). The bsr instruction on AMD Opteron is also not as fast.
- Replace various places where the next power-of-two is computed.
Tested on Intel Nehalem Cluster with openib, compilers GNU-4.6.1 and
Intel-12.0.4 using mpi_testsuite -t "Collective" with 128 processes.
This commit was SVN r25270.
- add 2 new device ids.
- default rq depth to 64, which proved good for large runs.
This commit should be added to cmr:v1.4:reviewer=jsquyres and
cmr:v1.5:reviewer=jsquyres
This commit was SVN r25145.
Global rdmacm_resolve_timeout defaults to 1000 (1000 ms), which is way
too small for even a 16 node x 12 core iwarp cluster in the presence
of drops. Bump up the default to 30000ms.
This commit fixes trac:2860 and should be added to cmr:v1.4:reviewer=jsquyres
and cmr:v1.5:reviewer=jsquyres
This commit was SVN r25144.
The following Trac tickets were found above:
Ticket 2860 --> https://svn.open-mpi.org/trac/ompi/ticket/2860
Don't juse include pre-processor macros between two strins ("s1" #if 0 ... "s2")...
Rather print out the epoch as 0 always...
This commit was SVN r25110.
To enable the epochs and the resilient orte code, use the configure flag:
--enable-resilient-orte
This will define both:
ORTE_ENABLE_EPOCH
ORTE_RESIL_ORTE
This commit was SVN r25093.
specify btl_tcp_if_include because btl_tcp_if_exclude is defaulted to
the loopback devices.
This commit does a few things:
* Introduce a new OPAL MCA base function:
mca_base_param_check_exclusive_string(). It checks to see that the
''user'' does not set two MCA parameters that are mutually
exclusive by checking the source of those MCS param values.
* Use the above function in many BTLs (and the OOB TCP) to ensure
that <foo>_if_include and <foo>_if_exclude are not both specified
''by the user''.
* Re-arrange many of these BTLs to move their MCA registration code
into a separate component_register() function (vs. the
component_open() function).
This code has been nominally reviewed and checked by Ralph, George,
Terry, and Shiqing.
This commit was SVN r25043.
The following SVN revision numbers were found above:
r24976 --> open-mpi/ompi@8f4ac54336
- Added dynamic SL support to xoob
- Fixed seg fault in finalization
- All the code has been moved to separate files: connect/btl_openib_connect_sl.{c,h}
- The new files compilation is conditionalized
This commit was SVN r24991.
btl_tcp_if_include and btl_tcp_if_exclude are specified.
This commit was SVN r24976.
The following Trac tickets were found above:
Ticket 2838 --> https://svn.open-mpi.org/trac/ompi/ticket/2838
- Added enable/disable configuration parameter for dynamic SL
- All the dynamic SL code is conditionalized
- Removed libibmad dependency
- Using only one include - ib_types.h (part of opensm-devel package)
- Removed all the macro and data types definitions, using the
existing definitions from ib_types.h instead
- general cleaning here and there
The async mode is not implemented yet - stay tuned...
This commit was SVN r24830.
No need for any CMRs to 1.5... that was already done in CMR 2728.
This commit was SVN r24545.
The following SVN revision numbers were found above:
r22841 --> open-mpi/ompi@b400b84162
* rename ib_path_rec_service_level -> ib_path_record_service_level
* use mad.h and ib_types.h
* free all resources
* move ibv_post_recv to be just before ibv_post_send
* cleanup and beatify code
This commit was SVN r24507.
Update the CMake script for checking mca subdirs.
Add windows support for __attribute__ packed structures.
Define usleep and posix_memalign with equivalent windows functions.
And a few minor fixes, type casts.
This commit was SVN r24429.
- poll() can return POLLRDNORM even if not requested (Solaris bug)
- MIN macro not defined in btl_openib.c
and while we're at it, we clean up the MIN definition in ad_bgl_pset.h
- btl_openib_connect_rdmacm.c was calling rdma_destroy_id() twice
leading to undefined behavior (a hang on Solaris)
This commit was SVN r24356.
code from upper level into btl configure.m4. Changed
prefix from "OMPI" to "BTL" in preprocessor macro. Add
an mca param that shows it has been configured in.
This commit was SVN r24270.
on some systems caused by the definition of malloc in
opal_config_bottom.h getting expanded in the system malloc.h when
OPAL_ENABLE_MEM_DEBUG is set to 1.
This commit was SVN r24210.
verbose statement that shows up when you --mca btl_base_verbose 100.
It clearly states that the openib BTL disqualifies itself when
MPI_THREAD_MULTIPLE is used.
This commit was SVN r24209.
{{{
base/paffinity_base_service.c: In function ‘opal_paffinity_base_cset2mapstr’:
base/paffinity_base_service.c:623: warning: unused variable ‘range_last’
base/paffinity_base_service.c:623: warning: unused variable ‘range_first’
base/paffinity_base_service.c:622: warning: unused variable ‘count’
base/paffinity_base_service.c:622: warning: unused variable ‘m’
}}}
{{{
connect/btl_openib_connect_oob.c: In function ‘init_ud_qp’:
connect/btl_openib_connect_oob.c:1111: warning: control reaches end of non-void function
connect/btl_openib_connect_oob.c: In function ‘init_device’:
connect/btl_openib_connect_oob.c:1235: warning: unused variable ‘i’
connect/btl_openib_connect_oob.c: In function ‘get_pathrecord_sl’:
connect/btl_openib_connect_oob.c:1323: warning: unused variable ‘i’
}}}
This commit was SVN r24196.
New mca parameter is added (ib_path_rec_service_level) - positive value means that we should get the SL from the SA.
This is usable for torus topologies where different SL value is used for different endpoints.
A cache is kept of ib queue pairs used to communicate with the SA for a particular device and port and path record SL values retrieved from that SA.
The interaction with the cache assumes that there are no recursive calls to these routines. This must be solved either by code flow, by using higher level locks, or by adding a locking mechanism to these routines along with some method for avoiding deadlock.
This code use a UD queue pair to talk to the SA, and not need to chmod /dev/infiniband/umad* for use by normal users.
The request to the SA is a SubnAdmGet(), not a SubnAdmGetTable().
In the future we might add a support of a SubnAdmGetTable(), but it will require implementing RMPP (Reliable Multi-Packet Transaction Protocol) and I'm not sure we want to do that.
This patched is based on the work of David McMillen <davem@systemfabricworks.com>.
This commit was SVN r24195.
The patch includes the following:
* Add new mca parameter - btl_openib_max_hw_msg_size - Maximum size (in bytes) of a single fragment of a long message when using the RDMA protocols (must be > 0 and <= hw capabilities).
* If btl_openib_max_hw_msg_size is larger than the maximum hw limitation print error message.
* Change the default openib flags to include only PUT and not GET.
* Print error message if user choose manually GET flag in openib btl.
* In prepare_dst: limit the message size to be the minimum of both endpoint's hw_limitation and the user limitation (if requested).
This commit was SVN r24191.
If specified, a comma-delimited list of TCP interfaces. Interfaces
will be assigned, one to each MPI process, in a round-robin fashion
on each server. For example, if the list is "eth0,eth1" and four
MPI processes are run on a single server, then local ranks 0 and 2
will use eth0 and local ranks 1 and 3 will use eth1.
This feature is only useful for environments with virtual ethernet
interfaces on the same network. For example, if eth0 and eth1 are
virtual interfaces to the same NIC on the same subnet, and if the NIC
provides different hardware resources to eth0 and eth1 (not just
different kernel resources), some HOL blocking and congestion issues
can be eased in a modest fashion.
This commit was SVN r24181.
Note: the ompi_check_libfca.m4 file had to be modified to avoid it stomping on global CPPFLAGS and the like. The file was also relocated to the ompi/config directory as it pertains solely to an ompi-layer component.
Forgive the mid-day configure change, but I know Shiqing is working the windows issues and don't want to cause him unnecessary redo work.
This commit was SVN r23966.
Setup the event API to support multiple bases in preparation for splitting the OMPI and ORTE events. Holding here pending shared memory resolution.
This commit was SVN r23943.
This is a fairly intrusive change, but outside of the moving of opal/event to opal/mca/event, the only changes involved (a) changing all calls to opal_event functions to reflect the new framework instead, and (b) ensuring that all opal_event_t objects are properly constructed since they are now true opal_objects.
Note: Shiqing has just returned from vacation and has not yet had a chance to complete the Windows integration. Thus, this commit almost certainly breaks Windows support on the trunk. However, I want this to have a chance to soak for as long as possible before I become less available a week from today (going to be at a class for 5 days, and thus will only be sparingly available) so we can find and fix any problems.
Biggest change is moving the libevent code from opal/event to a new opal/mca/event framework. This was done to make it much easier to update libevent in the future. New versions can be inserted as a new component and tested in parallel with the current version until validated, then we can remove the earlier version if we so choose. This is a statically built framework ala installdirs, so only one component will build at a time. There is no selection logic - the sole compiled component simply loads its function pointers into the opal_event struct.
I have gone thru the code base and converted all the libevent calls I could find. However, I cannot compile nor test every environment. It is therefore quite likely that errors remain in the system. Please keep an eye open for two things:
1. compile-time errors: these will be obvious as calls to the old functions (e.g., opal_evtimer_new) must be replaced by the new framework APIs (e.g., opal_event.evtimer_new)
2. run-time errors: these will likely show up as segfaults due to missing constructors on opal_event_t objects. It appears that it became a typical practice for people to "init" an opal_event_t by simply using memset to zero it out. This will no longer work - you must either OBJ_NEW or OBJ_CONSTRUCT an opal_event_t. I tried to catch these cases, but may have missed some. Believe me, you'll know when you hit it.
There is also the issue of the new libevent "no recursion" behavior. As I described on a recent email, we will have to discuss this and figure out what, if anything, we need to do.
This commit was SVN r23925.
This merges the branch containing the revamped build system based around converting autogen from a bash script to a Perl program. Jeff has provided emails explaining the features contained in the change.
Please note that configure requirements on components HAVE CHANGED. For example. a configure.params file is no longer required in each component directory. See Jeff's emails for an explanation.
This commit was SVN r23764.
of megabytes/s. So we get crazy btl_weights in case of heterogeneous
multirail. And --mca btl_mx_bandwidth <width> cannot work around the
problem (it probably doesn't help because it's overriden by the
runtime link width detection anyway?).
Signed-off-by: Brice Goglin <Brice.Goglin@inria.fr>
This commit was SVN r23712.
Somehow, there's an entire 2nd (identical) copy of the sm btl
configure.m4 in here -- this commit removes the duplicate copy,
leaving only 1 copy of each relevant m4 macro.
Thanks to Ralph for spotting it!
This commit was SVN r23675.
http://www.open-mpi.org/community/lists/devel/2010/07/8240.php
Documentation:
http://osl.iu.edu/research/ft/
Major Changes:
--------------
* Added C/R-enabled Debugging support.
Enabled with the --enable-crdebug flag. See the following website for more information:
http://osl.iu.edu/research/ft/crdebug/
* Added Stable Storage (SStore) framework for checkpoint storage
* 'central' component does a direct to central storage save
* 'stage' component stages checkpoints to central storage while the application continues execution.
* 'stage' supports offline compression of checkpoints before moving (sstore_stage_compress)
* 'stage' supports local caching of checkpoints to improve automatic recovery (sstore_stage_caching)
* Added Compression (compress) framework to support
* Add two new ErrMgr recovery policies
* {{{crmig}}} C/R Process Migration
* {{{autor}}} C/R Automatic Recovery
* Added the {{{ompi-migrate}}} command line tool to support the {{{crmig}}} ErrMgr component
* Added CR MPI Ext functions (enable them with {{{--enable-mpi-ext=cr}}} configure option)
* {{{OMPI_CR_Checkpoint}}} (Fixes trac:2342)
* {{{OMPI_CR_Restart}}}
* {{{OMPI_CR_Migrate}}} (may need some more work for mapping rules)
* {{{OMPI_CR_INC_register_callback}}} (Fixes trac:2192)
* {{{OMPI_CR_Quiesce_start}}}
* {{{OMPI_CR_Quiesce_checkpoint}}}
* {{{OMPI_CR_Quiesce_end}}}
* {{{OMPI_CR_self_register_checkpoint_callback}}}
* {{{OMPI_CR_self_register_restart_callback}}}
* {{{OMPI_CR_self_register_continue_callback}}}
* The ErrMgr predicted_fault() interface has been changed to take an opal_list_t of ErrMgr defined types. This will allow us to better support a wider range of fault prediction services in the future.
* Add a progress meter to:
* FileM rsh (filem_rsh_process_meter)
* SnapC full (snapc_full_progress_meter)
* SStore stage (sstore_stage_progress_meter)
* Added 2 new command line options to ompi-restart
* --showme : Display the full command line that would have been exec'ed.
* --mpirun_opts : Command line options to pass directly to mpirun. (Fixes trac:2413)
* Deprecated some MCA params:
* crs_base_snapshot_dir deprecated, use sstore_stage_local_snapshot_dir
* snapc_base_global_snapshot_dir deprecated, use sstore_base_global_snapshot_dir
* snapc_base_global_shared deprecated, use sstore_stage_global_is_shared
* snapc_base_store_in_place deprecated, replaced with different components of SStore
* snapc_base_global_snapshot_ref deprecated, use sstore_base_global_snapshot_ref
* snapc_base_establish_global_snapshot_dir deprecated, never well supported
* snapc_full_skip_filem deprecated, use sstore_stage_skip_filem
Minor Changes:
--------------
* Fixes trac:1924 : {{{ompi-restart}}} now recognizes path prefixed checkpoint handles and does the right thing.
* Fixes trac:2097 : {{{ompi-info}}} should now report all available CRS components
* Fixes trac:2161 : Manual checkpoint movement. A user can 'mv' a checkpoint directory from the original location to another and still restart from it.
* Fixes trac:2208 : Honor various TMPDIR varaibles instead of forcing {{{/tmp}}}
* Move {{{ompi_cr_continue_like_restart}}} to {{{orte_cr_continue_like_restart}}} to be more flexible in where this should be set.
* opal_crs_base_metadata_write* functions have been moved to SStore to support a wider range of metadata handling functionality.
* Cleanup the CRS framework and components to work with the SStore framework.
* Cleanup the SnapC framework and components to work with the SStore framework (cleans up these code paths considerably).
* Add 'quiesce' hook to CRCP for a future enhancement.
* We now require a BLCR version that supports {{{cr_request_file()}}} or {{{cr_request_checkpoint()}}} in order to make the code more maintainable. Note that {{{cr_request_file}}} has been deprecated since 0.7.0, so we prefer to use {{{cr_request_checkpoint()}}}.
* Add optional application level INC callbacks (registered through the CR MPI Ext interface).
* Increase the {{{opal_cr_thread_sleep_wait}}} parameter to 1000 microseconds to make the C/R thread less aggressive.
* {{{opal-restart}}} now looks for cache directories before falling back on stable storage when asked.
* {{{opal-restart}}} also support local decompression before restarting
* {{{orte-checkpoint}}} now uses the SStore framework to work with the metadata
* {{{orte-restart}}} now uses the SStore framework to work with the metadata
* Remove the {{{orte-restart}}} preload option. This was removed since the user only needs to select the 'stage' component in order to support this functionality.
* Since the '-am' parameter is saved in the metadata, {{{ompi-restart}}} no longer hard codes {{{-am ft-enable-cr}}}.
* Fix {{{hnp}}} ErrMgr so that if a previous component in the stack has 'fixed' the problem, then it should be skipped.
* Make sure to decrement the number of 'num_local_procs' in the orted when one goes away.
* odls now checks the SStore framework to see if it needs to load any checkpoint files before launching (to support 'stage'). This separates the SStore logic from the --preload-[binary|files] options.
* Add unique IDs to the named pipes established between the orted and the app in SnapC. This is to better support migration and automatic recovery activities.
* Improve the checks for 'already checkpointing' error path.
* A a recovery output timer, to show how long it takes to restart a job
* Do a better job of cleaning up the old session directory on restart.
* Add a local module to the autor and crmig ErrMgr components. These small modules prevent the 'orted' component from attempting a local recovery (Which does not work for MPI apps at the moment)
* Add a fix for bounding the checkpointable region between MPI_Init and MPI_Finalize.
This commit was SVN r23587.
The following Trac tickets were found above:
Ticket 1924 --> https://svn.open-mpi.org/trac/ompi/ticket/1924
Ticket 2097 --> https://svn.open-mpi.org/trac/ompi/ticket/2097
Ticket 2161 --> https://svn.open-mpi.org/trac/ompi/ticket/2161
Ticket 2192 --> https://svn.open-mpi.org/trac/ompi/ticket/2192
Ticket 2208 --> https://svn.open-mpi.org/trac/ompi/ticket/2208
Ticket 2342 --> https://svn.open-mpi.org/trac/ompi/ticket/2342
Ticket 2413 --> https://svn.open-mpi.org/trac/ompi/ticket/2413
#define CACHE_LINE_SIZE to 128. This name has a conflict on NetBSD,
and it seems kinda odd to have a header file that ''only'' defines a
single value. Also, we'll soon be raising hwloc to be a first-class
item, so having this file around seemed kinda weird.
Therefore, I replaced CACHE_LINE_SIZE with opal_cache_line_size, an
int (in opal/runtime/opal_init.c and opal/runtime/opal.h) on the
rationale that we can fill this in at runtime with hwloc info (trunk
and v1.5/beyond, only). The only place we ''needed'' a compile-time
CACHE_LINE_SIZE was in the BTL SM (for struct padding), so I made a
new BTL_SM_ preprocessor macro with the old CACHE_LINE_SIZE value
(128). That use isn't suitable for run-time hwloc information,
anyway.
This commit was SVN r23349.
Configure Option:
--enable-sysv
MCA Parameter:
mpi_common_sm
mpi_common_sm accepts a comma delimited list of: [sysv],mmap (order
dependent). The first component that is successfully selected is used. For
example, -mca mpi_common_sm sysv,mmap will first try sysv. If sysv is not
successfully selected, then mmap will be used. mmap will be used if
mpi_common_sm is not provided.
Notes:
Please make certain that your system's shmmax limit, or equivalent, is larger
than mpool_sm_min_size. Otherwise, shmget may fail.
This commit was SVN r23260.
At this point, it is just cleared (and ignored) so default behavior has not changed.
However, future failover support can take advantage of this flag.
Reviewed by Pasha Shamis.
This commit was SVN r23204.
allows the BTL to specify a specific ompi_proc_t that had an
error. Also add an optional descriptive string. Currently, arguments
are not used but will be by future failover PML.
Changes based on RFC. Reviewed by George Bosilca.
This commit was SVN r23174.
(OMPI_ERR_* = OPAL_SOS_GET_ERR_CODE(ret)), since the return value could be a
SOS-encoded error. The OPAL_SOS_GET_ERR_CODE() takes in a SOS error and returns
back the native error code.
* Since OPAL_SUCCESS is preserved by SOS, also change all calls of the form
(OPAL_ERROR == ret) to (OPAL_SUCCESS != ret). We thus avoid having to
decode 'ret' to get the native error code.
This commit was SVN r23162.
http://marc.info/?l=linux-mm-commits&m=127352503417787&w=2 for more
details.
* Remove the ptmalloc memory component; replace it with a new "linux"
memory component.
* The linux memory component will conditionally compile in support
for ummunotify. At run-time, if it has ummunotify support and
finds run-time support for ummunotify (i.e., /dev/ummunotify), it
uses it. If not, it tries to use ptmalloc via the glibc memory
hooks.
* Add some more API functions to the memory framework to accomodate
the ummunotify model (i.e., poll to see if memory has "changed").
* Add appropriate calls in the rcache to the new memory APIs to see
if memory has changed, and to react accordingly.
* Add a few comments in the openib BTL to indicate why we don't need
to notify the OPAL memory framework about specific instances of
registered memory.
* Add dummy API calls in the solaris malloc component (since it
doesn't have polling/"did memory change" support).
This commit was SVN r23113.
Remove the --enable-progress-threads option as this is no longer functional, and hardcode OPAL_ENABLE_PROGRESS_THREADS to 0.
Replace the --enable-mpi-threads option with --enable-mpi-thread-multiple as this is clearer as to meaning. This option automatically turns "on" opal thread support if it wasn't already so specified. If the user specifies --disable-opal-multi-threads --enable-mpi-thread-multiple, we will error out with a message
Add a new --enable-opal-multi-threads option that turns "on" opal thread support without doing anything wrt mpi-thread-multiple
This commit was SVN r22841.
Many of the OPAL_ENABLE_FT should be OPAL_ENABLE_FT_CR, so fix those.
The OPAL Layer INC should call opal_output on restart so that it can refresh the string it prints to reflect the current pid/hostname which may have changed.
This commit was SVN r22824.
Short version: there is a bug in OS X/Snow Leopard, but there is also
a bug in Open MPI. Fixing the bug in Open MPI is both trivial (a
1-line change) and avoids the bug in OS X. We'll file an OS X bug
report upstream with Apple, but it should no longer affect us here in
OMPI.
Fixes trac:2039.
More details:
Some background first:
1. IPv4 sockets can only accept incoming IPv4 connections. However,
IPv6 sockets can be configured to accept ''only'' incoming IPv6
connection, or ''both'' incoming IPv4 and IPv6 connections. An
IPv6 socket attribute sets which listening behavior is used.
1. IPv4 and IPv6 have different port namespaces. Hence, it is
permissable to bind a v4 socket to port X ''and'' also bind a v6
socket to that same port X on the same interface (assuming that
the v6 socket is only accepting incoming v6 connections).
Incoming v4 connections to port X on the interface should get
matched to the listening v4 socket; incoming v6 connections should
get matched to the listening v6 socket.
1. When v6 sockets accept ''both'' incoming v4 and v6 connections, it
should claim port X in both namespaces.
1. Linux's default behavior is to only allow one listening socket to
be bound to a given port (i.e., ''either'' a v6 or v4 socket to be
bound to a single port X -- not both). A v6 socket can listen for
both v4 and v6 incoming connections on that port, but still --
only one socket will be bound to that port.
1. Snow Leopard's default behavior is to share ports -- i.e., let
both a v4 and a v6 listening socket to be bound to port X
(assuming that the v6 socket is only accepting incoming v6
connections).
The TCP BTL creates a listening socket for each address family.
Hence, it creates a v4 listening socket on INADDR_ANY and a v6
listening socket on the v6 equivalent of INADDR_ANY. OMPI then
iteratively tries to find ports to listen on within the range of
[mca_btl_tcp_port_min, mca_btl_tcp_port_min + mca_btl_tcp_port_range).
On Linux, the v4 socket will be bound to port X and the v6 socket will
likely be bound to port Y (where X != Y). On Snow Leopard, the v4
socket will be bound to port X and the v6 socket may ''also'' be bound
to port X. Since the namespaces are separate, this shouldn't be a
problem.
However, Open MPI was accidentally setting the v6 listening behavior
to accept ''both'' v4 and v6 incoming connections. This is a trivial
thing to fix -- change a 0 to a 1 in the code. On Linux, this issue
didn't matter because the v4 and v6 sockets were on different ports.
So even though the v6 socket ''would'' have accepted incoming v4
connections, that never happened because OMPI would direct v4
connections to the v4 port.
But on Snow Leopard, the v4 and v6 listening ports could end up
sharing the same port number. As mentioned above, this ''shouldn't''
have been a problem, but it looks like Snow Leopard has the following
bugs:
* If a v4 socket is already bound to port X, we're pretty sure that a
v6 socket with the "accept both v4 and v6 incoming connections"
listening behavior should not be able to claim port X (because
there's already a v4 socket listening on X). However, Snow Leopard
would allow binding a v4 socket to port X, and then allow a v6
socket configured to allow incoming v4 and v6 connections to
''also'' be bound to port X.
* After binding the v6 socket to port X, Snow Leopard then lets
''another'' v4 socket ''also'' get bound to port X. Hence, there's
now '''three''' sockets all listening on port X.
This obviously led to mis-matched TCP connections, and things went
downhill from there.
That being said, Snow Leopard doesn't exhibit this behavior if v6
sockets only allow incoming v6 connections. And technically, that is
exactly the behavior we want (we want v6 sockets to only accept
incoming v6 connections). So if we just change the flag to make our
v6 listening socket us this behavior, the problem on OS X goes away.
That's what this commit does -- it changes a 0 to a 1, indicating
"only let this v6 socket allow incoming v6 connections."
That was simple, wasn't it?
This commit was SVN r22788.
The following Trac tickets were found above:
Ticket 2039 --> https://svn.open-mpi.org/trac/ompi/ticket/2039
1. The code that looks at btl_tcp_if_exclude before doing a
modex_send uses strcmp rather than strncmp. That means that
"lo0" gets sent even though "lo" is excluded.
2. The code that determines whether a particular local TCP
interface can connect to a particular remote interface doesn't
check for loopback interfaces. With this fix, users can now
enable "lo" and be assured that it will only be used for intra-
node communication.
This commit was SVN r22762.
btl_openib_ip.*. The routines in these files are not specific to
iwarp -- they are specific to IP interfaces used with IBV devices
(even IB or IBoE/RoCEE/whatever devices).
This commit was SVN r22718.
issues with iwarp.c. These fixes are needed for IBoE / ROCEE /
whateveritscalledtoday. I added a few minor changes to his base
patch.
This commit was SVN r22717.
when protecting the no_wqe_pending_frags list.
fixes trac:2118 add cmr:v1.4
This commit was SVN r22678.
The following Trac tickets were found above:
Ticket 2118 --> https://svn.open-mpi.org/trac/ompi/ticket/2118
Also includes some minor copytight header additions that were missed in previous checkins
fixes trac:2101 added cmr:v1.4
This commit was SVN r22676.
The following Trac tickets were found above:
Ticket 2101 --> https://svn.open-mpi.org/trac/ompi/ticket/2101
long-standing bugs (see trac ticket list below). They're currently
somewhat obscure bugs, but are becoming much more relevant in a world
where OpenFabrics devices fail and you replace them with a newer model
(i.e., the cluster is homogeneous... ''except'' for where you had to
replace one or two OpenFabrics devices, and the same model is no
longer available).
This commit includes a '''lengthy''' comment (that we spent a lot of
time writing!) about what exactly it does and does not do. The
previous code was rather short and '''incredibly''' subtle. The new
code is slightly longer, but is both much more explicit and much more
painstakingly documented.
This commit fixes multiple trac tickets. The real one that we fix is
#1707; the others are fixed as a side-effect. In short: fixing #1707
prevents Bad Things from happening later in the startup sequence.
Fixes trac:1707, #2164, #1574.
cmr:v1.4.2:reviewer=pasha
cmr:v1.5:reviewer=pasha
This commit was SVN r22592.
The following Trac tickets were found above:
Ticket 1707 --> https://svn.open-mpi.org/trac/ompi/ticket/1707
In CMake 2.6 and earlier, this function add dependencies for targets and also link the target libraries automatically, but in CMake 2.8,this behavior has been changed, i.e. it will only add the dependencies but no link, which will cause linking errors at compilation time.
This commit was SVN r22405.
than can be used (e.g., number of on-node peers), that no additional
room is set aside for those FIFOs that will never be created. This
makes it easier to have dedicated FIFOs: just set btl_sm_num_fifos
to be very large rather than setting it to be the local number of
procs. In practice, we ask for extra headroom anyhow, so this change
generally won't matter.
This commit was SVN r22291.
area, we cap the size at LONG_MAX. But we are figuring out how much
we need. So, if that amount exceeds LONG_MAX, we should return an
"out of resource" error code.
This commit was SVN r22172.
This commit does a bunch of things:
* Address all remaining code review items from CMR #2023:
* Defer mmap setup to be lazy; only set it up the first time we
invoke a collective. In this way, we don't penalize apps that
make lots of communicators but don't invoke collectives on them
(per #2027).
* Remove the extra assignments of mca_coll_sm_one (fixing a
convertor count setup that was the real problem).
* Remove another extra/unnecessary assignment.
* Increase libevent polling frequency when using the RML to
bootstrap mmap'ed memory.
* Fix a minor procs-related memory leak in btl_sm.
* Commit a datatype fix that George and I discovered along the way to
fixing the coll sm.
* Improve error messages when mmap fails, potentially trying to
de-alloc any allocated memory when that happens.
* Fix a previously-unnoticed confusion between extent and true_extent
in coll sm reduce.
This commit was SVN r22049.
The following Trac tickets were found above:
Ticket 2023 --> https://svn.open-mpi.org/trac/ompi/ticket/2023
Before this, we would restore the topmost old session directory. This commit makes sure that we remove it when we are done with it.
This commit was SVN r21971.
* Various cosmetic/style updates in the btl sm
* Clean up concept of mpool module (I think that code was written way
back when the concept of "modules" was fuzzy)
* Bring over some old fixes from the /tmp/timattox-sm-coll/ tree to
fix potential segv's when mmap'ed regions were at different
addresses in different processes (thanks Tim!).
* Change sm coll to no longer use mpool as its main source of shmem;
rather, just mmap its own segment (because it's fixed size --
there was nothing to be gained by using mpool; shedding the use of
mpool saved a lot of complexity in the sm coll setup). This
effectively made Tim's fixes moot (because now everything is an
offset into the mmap that is computed locally; there are no global
pointers). :-)
* Slightly updated common/sm to allow making mmap's for a specific
set of procs (vs. ''all'' procs in the process). This potentially
allows for same-host-inter-proc mmaps -- yay!
* Fixed many, many things in the coll sm (particularly in reduce):
* Fixed handling of MPI_IN_PLACE in reduce and allreduce
* Fixed handling of non-contiguous datatypes in reduce
* Changed the order of reductions to go from process (n-1)'s data
to process 0's data, because that's how all other OMPI coll
components work
* Fixed lots of usage of ddt functions
* When using a non-contiguous datatype, if the root process is not
(n-1), now we used a 2nd convertor to copy from shmem to the rbuf
(saves a memory copy vs. what was done before)
* Lots and lots of little cleanups, clarifications, and minor
optimizations (although still more could be done -- e.g., I think
the use of write memory barriers is fairly sub-optimal; they
could be ganged together at the root, for example)
I'm marking this as "fixes trac:1988" and closing the ticket; if something
is still broken, we can re-open the ticket.
This commit was SVN r21967.
The following Trac tickets were found above:
Ticket 1988 --> https://svn.open-mpi.org/trac/ompi/ticket/1988
#if defined (c_plusplus)
defined (__cplusplus)
followed by
extern "C" {
and the closing counterpart by BEGIN_C_DECLS and END_C_DECLS.
Notable exceptions are:
- opal/include/opal_config_bottom.h:
This is our generated code, that itself defines BEGIN_C_DECL and
END_C_DECL
- ompi/mpi/cxx/mpicxx.h:
Here we do not include opal_config_bottom.h:
- Belongs to external code:
opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.c
opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.h
- opal/include/opal/prefetch.h:
Has C++ specific macros that are protected:
- Had #if ... } #endif _and_ END_C_DECLS (aka end up with 2x
END_C_DECLS)
ompi/mca/btl/openib/btl_openib.h
- opal/event/event.h has #ifdef __cplusplus as BEGIN_C_DECLS...
- opal/win32/ompi_process.h: had extern "C"\n {...
opal/win32/ompi_process.h: dito
- ompi/mca/btl/pcie/btl_pcie_lex.l: needed to add *_C_DECLS
ompi/mpi/f90/test/align_c.c: dito
- ompi/debuggers/msgq_interface.h: used #ifdef __cplusplus
- ompi/mpi/f90/xml/common-C.xsl: Amend
Tested on linux using --with-openib and --with-mx
The following do not contain either opal_config.h, orte_config.h or
ompi_config.h
(but possibly other header files, that include one of the above):
ompi/mca/bml/r2/bml_r2_ft.h
ompi/mca/btl/gm/btl_gm_endpoint.h
ompi/mca/btl/gm/btl_gm_proc.h
ompi/mca/btl/mx/btl_mx_endpoint.h
ompi/mca/btl/ofud/btl_ofud_endpoint.h
ompi/mca/btl/ofud/btl_ofud_frag.h
ompi/mca/btl/ofud/btl_ofud_proc.h
ompi/mca/btl/openib/btl_openib_mca.h
ompi/mca/btl/portals/btl_portals_endpoint.h
ompi/mca/btl/portals/btl_portals_frag.h
ompi/mca/btl/sctp/btl_sctp_endpoint.h
ompi/mca/btl/sctp/btl_sctp_proc.h
ompi/mca/btl/tcp/btl_tcp_endpoint.h
ompi/mca/btl/tcp/btl_tcp_ft.h
ompi/mca/btl/tcp/btl_tcp_proc.h
ompi/mca/btl/template/btl_template_endpoint.h
ompi/mca/btl/template/btl_template_proc.h
ompi/mca/btl/udapl/btl_udapl_eager_rdma.h
ompi/mca/btl/udapl/btl_udapl_endpoint.h
ompi/mca/btl/udapl/btl_udapl_mca.h
ompi/mca/btl/udapl/btl_udapl_proc.h
ompi/mca/mtl/mx/mtl_mx_endpoint.h
ompi/mca/mtl/mx/mtl_mx.h
ompi/mca/mtl/psm/mtl_psm_endpoint.h
ompi/mca/mtl/psm/mtl_psm.h
ompi/mca/pml/cm/pml_cm_component.h
ompi/mca/pml/csum/pml_csum_comm.h
ompi/mca/pml/dr/pml_dr_comm.h
ompi/mca/pml/dr/pml_dr_component.h
ompi/mca/pml/dr/pml_dr_endpoint.h
ompi/mca/pml/dr/pml_dr_recvfrag.h
ompi/mca/pml/example/pml_example.h
ompi/mca/pml/ob1/pml_ob1_comm.h
ompi/mca/pml/ob1/pml_ob1_component.h
ompi/mca/pml/ob1/pml_ob1_endpoint.h
ompi/mca/pml/ob1/pml_ob1_rdmafrag.h
ompi/mca/pml/ob1/pml_ob1_recvfrag.h
ompi/mca/pml/v/pml_v_output.h
opal/include/opal/prefetch.h
opal/mca/timer/aix/timer_aix.h
opal/util/qsort.h
test/support/components.h
This commit was SVN r21855.
The following SVN revision numbers were found above:
r2 --> open-mpi/ompi@58fdc18855
BTL/sm. This static variable needlessly ends up in the so.-file.
init_maffinity is called once from sm_btl_first_time_init.
Checked with lennyve, static here is not necessary.
This commit was SVN r21813.
The following SVN revision numbers were found above:
r18658 --> open-mpi/ompi@f4811d6c4d
variables that are not initialized and are declared in a file that
doesn't export any globally visible function are marked as
non-initialized constants, i.e. uninitialized common symbols. For some
obscure reasons, they get removed from the object files on Mac OS X.
So far I found two solution to this problem. One require the addition
of "-c" to the linker command, the second one (corresponding to this
patch) force them to became a common initialized symbol.
This commit was SVN r21739.
