OMPI
and a language agnostic part in OPAL. The convertor is completely
moved into OPAL. This offers several benefits as described in RFC
http://www.open-mpi.org/community/lists/devel/2009/07/6387.php
namely:
- Fewer basic types (int* and float* types, boolean and wchar
- Fixing naming scheme to ompi-nomenclature.
- Usability outside of the ompi-layer.
- Due to the fixed nature of simple opal types, their information is
completely
known at compile time and therefore constified
- With fewer datatypes (22), the actual sizes of bit-field types may be
reduced
from 64 to 32 bits, allowing reorganizing the opal_datatype
structure, eliminating holes and keeping data required in convertor
(upon send/recv) in one cacheline...
This has implications to the convertor-datastructure and other parts
of the code.
- Several performance tests have been run, the netpipe latency does not
change with
this patch on Linux/x86-64 on the smoky cluster.
- Extensive tests have been done to verify correctness (no new
regressions) using:
1. mpi_test_suite on linux/x86-64 using clean ompi-trunk and
ompi-ddt:
a. running both trunk and ompi-ddt resulted in no differences
(except for MPI_SHORT_INT and MPI_TYPE_MIX_LB_UB do now run
correctly).
b. with --enable-memchecker and running under valgrind (one buglet
when run with static found in test-suite, commited)
2. ibm testsuite on linux/x86-64 using clean ompi-trunk and ompi-ddt:
all passed (except for the dynamic/ tests failed!! as trunk/MTT)
3. compilation and usage of HDF5 tests on Jaguar using PGI and
PathScale compilers.
4. compilation and usage on Scicortex.
- Please note, that for the heterogeneous case, (-m32 compiled
binaries/ompi), neither
ompi-trunk, nor ompi-ddt branch would successfully launch.
This commit was SVN r21641.
the debugger plugins into files suffixed by _dbg.h.
This commit was SVN r21404.
The following Trac tickets were found above:
Ticket 1931 --> https://svn.open-mpi.org/trac/ompi/ticket/1931
MPI_MAX_PROCESSOR_NAME
MPI_MAX_ERROR_STRING
MPI_MAX_OBJECT_NAME
MPI_MAX_INFO_KEY
MPI_MAX_INFO_VAL
MPI_MAX_PORT_NAME
MPI_MAX_DATAREP_STRING
Defaults stay as theyr currently are -- and now give an explanation on the
min/max values being used in a central place...
m4-macro _OPAL_WITH_OPTION_MIN_MAX_VALUE may be benefical in other parts
of the configure system.
- We need some of these in the lower level OPAL for an upcoming commit!
All other levels base their values on them.
This commit was SVN r21292.
OMPI_* to OPAL_*. This allows opal layer to be used more independent
from the whole of ompi.
NOTE: 9 "svn mv" operations immediately follow this commit.
This commit was SVN r21180.
- Delete unnecessary header files using
contrib/check_unnecessary_headers.sh after applying
patches, that include headers, being "lost" due to
inclusion in one of the now deleted headers...
In total 817 files are touched.
In ompi/mpi/c/ header files are moved up into the actual c-file,
where necessary (these are the only additional #include),
otherwise it is only deletions of #include (apart from the above
additions required due to notifier...)
- To get different MCAs (OpenIB, TM, ALPS), an earlier version was
successfully compiled (yesterday) on:
Linux locally using intel-11, gcc-4.3.2 and gcc-SVN + warnings enabled
Smoky cluster (x86-64 running Linux) using PGI-8.0.2 + warnings enabled
Lens cluster (x86-64 running Linux) using Pathscale-3.2 + warnings enabled
This commit was SVN r21096.
- This patch solely _adds_ required headers and is rather localized
The next patch (after RFC) heavily removes headers (based on script)
- ompi/communicator/communicator.h: For sources that use
ompi_mpi_comm_world, don't require them to include "mpi.h"
- ompi/debuggers/ompi_common_dll.c: mca_topo_base_comm_1_0_0_t needs
#include "ompi/mca/topo/topo.h"
- ompi/errhandler/errhandler_predefined.h:
ompi/communicator/communicator.h depends on this header file!
To prevent recursion just have fwd declarations.
#include "ompi/types.h" for fwd declarations of the main structs.
- ompi/mca/btl/btl.h: #include "opal/types.h" for ompi_ptr_t
- ompi/mca/mpool/base/mpool_base_tree.c: We use ompi_free_list_t and
ompi_rb_tree_t, so have the proper classes
- ompi/mca/op/op.h:
Op is pretty self-contained: Nobody up to now has done
#include "opal/class/opal_object.h"
- ompi/mca/osc/pt2pt/osc_pt2pt_replyreq.h:
#include "opal/types.h" for ompi_ptr_t
- ompi/mca/pml/base/base.h:
We use opal_lists
- ompi/mca/pml/dr/pml_dr_vfrag.h:
#include "opal/types.h" for ompi_ptr_t
- ompi/mca/pml/ob1/pml_ob1_hdr.h:
#include "ompi/mca/btl/btl.h" for mca_btl_base_segment_t
- opal/dss/dss_unpack.c:
#include "opal/types.h"
- opal/mca/base/base.h:
#include "opal/util/cmd_line.h" for opal_cmd_line_t
- orte/mca/oob/tcp/oob_tcp.c:
#include "opal/types.h" for opal_socklen_t
- orte/mca/oob/tcp/oob_tcp.h:
#include "opal/threads/threads.h" for opal_thread_t
- orte/mca/oob/tcp/oob_tcp_msg.c:
#include "opal/types.h"
- orte/mca/oob/tcp/oob_tcp_peer.c:
#include "opal/types.h" for opal_socklen_t
- orte/mca/oob/tcp/oob_tcp_send.c:
#include "opal/types.h"
- orte/mca/plm/base/plm_base_proxy.c:
#include "orte/util/name_fns.h" for ORTE_NAME_PRINT
- orte/mca/rml/base/rml_base_receive.c:
#include "opal/util/output.h" for OPAL_OUTPUT_VERBOSE
- orte/mca/rml/oob/rml_oob_recv.c:
#include "opal/types.h" for ompi_iov_base_ptr_t
- orte/mca/rml/oob/rml_oob_send.c:
#include "opal/types.h" for ompi_iov_base_ptr_t
- orte/runtime/orte_data_server.c
#include "opal/util/output.h" for OPAL_OUTPUT_VERBOSE
- orte/runtime/orte_globals.h:
#include "orte/util/name_fns.h" for ORTE_NAME_PRINT
Tested on Linux/x86-64
This commit was SVN r20817.
get bitten by header depending on having already included
the corresponding [opal|orte|ompi]_config.h header.
When separating, things like [OPAL|ORTE|OMPI]_DECLSPEC
are missed.
Script to add the corresponding header in front of all following
(taking care of possible #ifdef HAVE_...)
- Including some minor cleanups to
- ompi/group/group.h -- include _after_ #ifndef OMPI_GROUP_H
- ompi/mca/btl/btl.h -- nclude _after_ #ifndef MCA_BTL_H
- ompi/mca/crcp/bkmrk/crcp_bkmrk_btl.c -- still no need for
orte/util/output.h
- ompi/mca/pml/dr/pml_dr_recvreq.c -- no need for mpool.h
- ompi/mca/btl/btl.h -- reorder to fit
- ompi/mca/bml/bml.h -- reorder to fit
- ompi/runtime/ompi_mpi_finalize.c -- reorder to fit
- ompi/request/request.h -- additionally need ompi/constants.h
- Tested on linux/x86-64
This commit was SVN r20720.
Terry and George in the non-sparse-groups scenarios. Fixes trac:1464.
Will file a new ticket to actually resolve IDs when sparse groups are
used.
This commit was SVN r19610.
The following Trac tickets were found above:
Ticket 1464 --> https://svn.open-mpi.org/trac/ompi/ticket/1464
* Protect an orte variable used in the orte debugger stuff
* Initialize the datatype code in the Catamount code, as we need it
for intercommunicators (the proc code needs it to pack the remote
name)
* Turn on a bunch of the orte datatype code so that ORTE_NAME is available.
This commit was SVN r19457.
set when it launches under debuggers using the --debug option.
This commit was SVN r19116.
The following Trac tickets were found above:
Ticket 1361 --> https://svn.open-mpi.org/trac/ompi/ticket/1361
the shared object when it is compiled with the Sun Studio C compiler.
Depends on where the extern variables that are included in the headers were
initialized, there can be instances wheter there is no storage allocated
for the variables and therefore the symbols may or may not be defined
when the debugger tries to dlopen this message queue dll.
This commit was SVN r18685.
(still need the real yod environment variable name), and add in some
lengthy comments explaining the two different methods of debugger
attach that we're using.
MPI handle debugging doesn't seem to be working at the moment; still
checking into it...
This commit was SVN r18672.
Some minor changes to help facilitate debugger support so that both mpirun and yod can operate with it. Still to be completed.
This commit was SVN r18664.
This commit repairs the debugger initialization procedure. I am not closing the ticket, however, pending Jeff's review of how it interfaces to the ompi_debugger code he implemented. There were duplicate symbols being created in that code, but not used anywhere. I replaced them with the ORTE-created symbols instead. However, since they aren't used anywhere, I have no way of checking to ensure I didn't break something.
So the ticket can be checked by Jeff when he returns from vacation... :-)
This commit was SVN r18625.
The following Trac tickets were found above:
Ticket 1255 --> https://svn.open-mpi.org/trac/ompi/ticket/1255
* New/improved bootstrapping technique for DLLs
* First cut of the MPI handle debugging interface. It is still
evolving, but the interface is getting more stable.
* Some minor bugs were fixed in the unity topo component (brought to
light because of the new MPI handle debugging stuff).
Fixes trac:1209.
This commit was SVN r17730.
The following Trac tickets were found above:
Ticket 1209 --> https://svn.open-mpi.org/trac/ompi/ticket/1209
(sometimes after the merge with the ORTE branch), the opal_pointer_array
will became the only pointer_array implementation (the orte_pointer_array
will be removed).
This commit was SVN r17007.
about linkers, have all OPAL, ORTE, and OMPI components '''not'' link
against the OPAL, ORTE, or OMPI libraries.
See ttp://www.open-mpi.org/community/lists/users/2007/10/4220.php for
details (or https://svn.open-mpi.org/trac/ompi/wiki/Linkers for a
better-formatted version of the same info).
This commit was SVN r16968.
fact a free_list_item so instead of having a struct, use typedef
to make them equivalent. Modify the parallel debuggers support
in order to allow them access to the internal types even when
we have an optimized build.
This commit was SVN r16567.
is set to the cid of the communicator (unique id for each communicator).
Make sure each communicator have a group attached to it. The MPI_COMM_NULL
should have the MPI_GROUP_NULL as a group, in all circumstances.
This commit was SVN r16177.
executable has called MPI_Finalize(). It happens when removing the group
from each of the communicators, that MPI_COMM_NULL doesn't have a group.
Also fix the code from skipping over every other communicator when
freeing the groups.
This commit was SVN r16166.
off and bogus addresses to show up for the requests, which in turns causes
message queues not showing up when debugging a 64 bit app on a 32 bit
tvd and dll on only Solaris SPARC.
This commit was SVN r16052.
from showing up in the message queue graph. Tags are now casted to int
before the negative checks, since tags by the spec are stored as
mqs_tword_t, an unsigned long long.
This commit was SVN r16027.
The following SVN revision numbers were found above:
r15915 --> open-mpi/ompi@b9ea4c92e7
difference between the user specified length, and the one available from
Open MPI (this allow to se the truncated receives). Moreover, if the
data-type used is named we now print the count as well as the name of
the used data-type.
This commit was SVN r15962.
of the process in the MPI_COMM_WORLD, while a local rank is the rank
of the process in the communicator where the request was posted. In
order to get the message graph nicely, each request has to have the
global rank set correctly.
This commit was SVN r15926.
lowest_free and number_free detect if the communicator list has changed.
If not, there is no reason to rebuild it, just use the old one.
This commit was SVN r15895.
{{{
ompi/debuggers/ompi_dll.c:102: error: initializer element is not
constant
}}}
The fix is stupid and I suspect that we'll want to ''not'' print out
all this debugging information all the time. But I'll leave that to
George to fix... :-)
This commit was SVN r15880.
opal_list_t, ompi_free_list_t so every time there is a modification
in one of these files (such as changing the way we allocate the
elements in the free list) the debugger interface have to
reflect these changes.
This commit was SVN r15876.
include any optimization flags
- Use these flags to always compile ompi/debuggers/* and orterun so
that parallel debuggers (such as Totalview) can always see the
debugging symbols (see comments in ompi/debuggers/Makefile.am and
orte/tools/orterun/Makefile.am)
- Remove some obsolete LAM-named variables from configure.ac
This commit was SVN r7125.
