1
1
Граф коммитов

164 Коммитов

Автор SHA1 Сообщение Дата
Mike Dubman
8c265fab15 BUILD RPM: revert dist token in Release tag, reset dist to nil when building src.rpm
This commit was SVN r32224.
2014-07-12 12:29:30 +00:00
Mike Dubman
080d88bc9b build: remove distro id from src.rpm filename, select md5 packing algorithm for
consistency across different distros: src.rpm create on one distro can be unpacked on
another when same packing algorithm used on both.

reviewed by Jeff
cmr=v1.8.2:reviewer=ompi-rm1.8

This commit was SVN r32205.
2014-07-10 19:35:15 +00:00
Jeff Squyres
e498e20d46 openmpi.spec: several minor fixes
Thanks to Oliver Lahaye for supplying the patch.

This commit was SVN r32147.
2014-07-07 12:06:55 +00:00
Jeff Squyres
3de7bb61cb Linux specfile: update %description blocks
Update the Open MPI description and fix lots of grammatical errors in
the OpenSHMEM description.

cmr=v1.8.2:reviewer=ompi-rm1.8

This commit was SVN r31709.
2014-05-09 14:21:36 +00:00
Dave Goodell
33da7d6f23 gkcommit.pl: fix UTF-8 and other encoding issues
The gatekeeper script was not correctly respecting the locale specified
in the user's environment.  So basically this scenario could (and did)
easily happen:

1. A committer writes a valid message in UTF-8 and runs `svn commit` with
   a correct locale setting of `LANG=en_US.UTF-8`.

2. SVN transcodes that to UTF-8 for internal storage (a no-op in this
   case).

3. The gatekeeper, also with `LANG=en_US.UTF-8` set, runs
   `gkcommit.pl ...`.  This breaks down into the following steps:

   A. run `svn log --xml ...`, which SVN correctly transcodes from UTF-8
      into the current locale, which happens to also be UTF-8

   B. Perl reads this in and assumes this is a sequence of raw 8-bit
      bytes in a "native" latin1-type encoding.

   C. Perl's XML::Parser module spots the XML declaration stating the
      content is UTF-8 encoded: `<?xml version="1.0" encoding="UTF-8"?>`.
      Perl internally stores the parsed strings as proper Unicode
      strings (UTF-8 encoded internally, but that's irrelevant here).

   D. Perl writes out the commit message file in the _latin1_ encoding,
      transcoding characters from internal UTF-8.  This causes
      characters like "ä" (Unicode code point: 0xe4, UTF-8 encoding:
      0xc3 0xa4) to be encoded as a single byte: 0xe4.

This fix changes the behavior at steps 3A and 3D to transparently treat
the incoming/outgoing data as UTF-8 (assuming a UTF-8 locale is set in
the user's environment).

There can still be problems if either the committer or the gatekeeper
have locale settings that do not agree with the encoding that their
editor is producing, but such is i18n :(

Helpful references for anyone debugging this sort of issue in the
future:

* http://perldoc.perl.org/perllocale.html#Unicode-and-UTF-8
* http://perldoc.perl.org/perluniintro.html#Unicode-I%2fO

Refs trac:4217

Reviewed-by: Jeff Squyres <jsquyres@cisco.com>

cmr=v1.7.5:reviewer=ompi-rm1.7

This commit was SVN r30709.

The following Trac tickets were found above:
  Ticket 4217 --> https://svn.open-mpi.org/trac/ompi/ticket/4217
2014-02-13 03:56:01 +00:00
Mike Dubman
be80ade431 Implemening Jeffs comments
Refs: #3887 reviewer=ompi-rm1.7

This commit was SVN r29647.
2013-11-09 15:41:31 +00:00
Mike Dubman
926667c114 Move debian/ into contrib
Refs: #3887
reviewer=ompi-rm1.7

This commit was SVN r29633.
2013-11-07 14:19:27 +00:00
Mike Dubman
d8a24692b0 revert r29615, will stick to Dave suggestion and put everything under contrib/dist/linux/debian
Refs: #3887

This commit was SVN r29632.

The following SVN revision numbers were found above:
  r29615 --> open-mpi/ompi@c356bdeeae
2013-11-07 09:28:43 +00:00
Mike Dubman
c356bdeeae packaging: add support for debian + example
unfortunately the debian packaging files should reside in the root folder
and cannot be placed under contrib/dist/... tree.
developed by Aleksey, reviewed by miked
cmr=v1.7.4:reviewer=ompi-gk1.7

This commit was SVN r29615.
2013-11-06 12:50:28 +00:00
Mike Dubman
713af6a7a9 add "--distdir /path/to/move/openmpi-*" param to select where to store build products
needed for jenkins, the default ".." is r/o fs in jenkins

cmr=v1.7.4:reviewer=jsquyres

This commit was SVN r29297.
2013-09-30 17:19:47 +00:00
Joshua Ladd
b3f88c4a1d Per the RFC schedule, this commit adds Mellanox OpenSHMEM to the trunk. It does not yet run on OSX or with CM PML for an MTL other than MXM. Mellanox is aware of these issues and is in the process of resolving them. This should be added to \ncmr=v1.7.4:subject=Move OSHMEM to 1.7.4:reviewer=rhc
This commit was SVN r29153.
2013-09-10 15:34:09 +00:00
Jeff Squyres
f85dca0285 Fix spelling mistake that has been there for a long, long time...
This commit was SVN r28562.
2013-05-24 22:28:15 +00:00
Jeff Squyres
aa8e45367a Use the proper git command to revert a file ("git checkout VERSION")
This commit was SVN r28271.
2013-04-02 12:05:30 +00:00
Nathan Hjelm
9d1041b058 fix typo. should have been field 1 not 2
This commit was SVN r28235.
2013-03-27 17:51:11 +00:00
Nathan Hjelm
4719e545f0 Add support for git to make_dist_tarball
This commit was SVN r28234.
2013-03-27 17:48:09 +00:00
Jeff Squyres
a951fde1ec Run a final "svn up" at the end of a successful gkcommit so that we
get a stable svnversion number (thereby allowing the next merge).

This commit was SVN r28128.
2013-02-27 15:04:51 +00:00
Jeff Squyres
8e304f0fb5 Remove the comment about OSCAR being long gone; it's apparently alive
and well.

This commit was SVN r27674.
2012-12-15 13:08:04 +00:00
Jeff Squyres
b8a83c43fd Merge over fixes and updates to the spec file from the v1.6 branch.
See #27663 and #27664.

This commit was SVN r27665.
2012-12-11 20:41:06 +00:00
Jeff Squyres
9dbbddc89a Update the script to make PHP-ized man pages to be a bit more
automatic. 

This commit was SVN r27359.
2012-09-21 06:43:53 +00:00
Jeff Squyres
de512db1fd Simpler scheme than r27195: if the gk commit file ends up being 0
bytes long, then abort the commit.  This avoids asking an extra
question in the most common case (where the GK doesn't edit the file
at all).

This commit was SVN r27198.

The following SVN revision numbers were found above:
  r27195 --> open-mpi/ompi@70aa879ed3
2012-08-31 16:05:09 +00:00
Jeff Squyres
70aa879ed3 Add 2 new features to the gkcommit script:
1. Warn the GK if the commit message didn't change (just like svn).
    If it didn't change, give the GK the option to abort, continue, or
    edit the file again.
 1. Include in the GK commit message the output of "svn status", so
    that the GK can see what files changed, etc.

This commit was SVN r27195.
2012-08-31 13:26:46 +00:00
Jeff Squyres
ec874b5fe2 Allow gkcommit.pl to accept lists of r numbers and trac ticket numbers
This commit was SVN r27033.
2012-08-14 18:08:42 +00:00
Ralph Castain
908166d4f8 Need to remove even capital letters from the releases as Apple has now started appending things to libs it changes (e.g., flex on Mountain Lion). Cleanup the case logic to handle all cases so we don't fall down to "unknown" by mistake.
This commit was SVN r26983.
2012-08-10 16:31:39 +00:00
Jeff Squyres
0581364508 It occurs to me that the scripts used to build nightly and official
Open MPI tarballs are not saved anywhere besides the local disk of the
build server (eddie.osl.iu.edu).  So I'm putting them here in SVN so
that if something ever happens to eddie, we still have the scripts to
make a new build server.

See the README.txt for more details.

This commit was SVN r26978.
2012-08-08 19:31:51 +00:00
Jeff Squyres
e1ced2320a Make dist tarballs accept no lower than AM 1.12.2
This commit was SVN r26791.
2012-07-13 15:40:35 +00:00
Jeff Squyres
87ca716daf Use a little better wiki formatting so that not everything is jumbled
onto a single line when viewing the commit message in trac.

This commit was SVN r26735.
2012-07-03 19:21:41 +00:00
Jeff Squyres
c2a4a0a987 Upgrade the nightly tarball autoconf bootstrapping to:
- AC 2.69
- AM 1.12.1
- LT 2.4.2
- m4 1.4.16

This commit was SVN r26705.
2012-07-02 14:47:04 +00:00
Jeff Squyres
7dcce6d19b Open MPI is no longer distributed in OFED, so remove all the
OFED-specific crud (i.e., the ofed and munge-build-into-install
stuff).

This commit was SVN r26700.
2012-06-29 15:43:54 +00:00
Jeff Squyres
ef54fdc632 Force the hashing functions to be md5 so that the SRPM remains
backwards compatible with older RPM implementations.

This commit was SVN r26534.
2012-06-01 19:03:57 +00:00
Jeff Squyres
692ee4dd9a Add comment about RHEL6
This commit was SVN r26288.
2012-04-18 16:58:37 +00:00
Jeff Squyres
eebc0177f9 Make sure to make any old files readable (e.g., from an aborted prior
"make dist")

This commit was SVN r26281.
2012-04-18 14:48:26 +00:00
Jeff Squyres
e366075151 Minor updates to the Open MPI spec file
This commit was SVN r25950.
2012-02-17 13:37:42 +00:00
Jeff Squyres
7ade4fc70f Look for README.WINDOWS.txt now (the .txt suffix is new).
This commit was SVN r25947.
2012-02-17 11:40:15 +00:00
Jeff Squyres
8e6507588a Fix the out directory, and make sure to create it, even if it's
specified in a relative sense.

This commit was SVN r25922.
2012-02-14 18:44:00 +00:00
Jeff Squyres
226c9af195 Make the HTML man page script a little better: effectively do a "mkdir
-p" when creating new directories.

This commit was SVN r25921.
2012-02-14 18:37:12 +00:00
Jeff Squyres
3b299257b9 Some improvements to the make_dist_tarball script, particularly for hg
repos.

This commit was SVN r25913.
2012-02-13 23:16:13 +00:00
Jeff Squyres
a15482686b Update to the same version numbers that we're now using in the v1.5
branch.  

This commit was SVN r25881.
2012-02-08 16:39:43 +00:00
Jeff Squyres
50ab8d893c Recent (as of 3 Aug 2011) versions of LWP in Macports seem to have
broken SSL certificate verification.  The IU CA is in my Mac system
keychain (and has been there for quite a long time), but after a
recent ports update, LWP fails the SSL certificate verification.
Fine.  So we'll just turn it off, per
http://search.cpan.org/~gaas/libwww-perl-6.02/lib/LWP/UserAgent.pm.

This commit was SVN r24983.
2011-08-03 13:50:23 +00:00
Jeff Squyres
cebd1837e5 Add special token to gkcommit commit messages so that the SVN
pre-commit hook doesn't try to re-close tickets that are referred to
in the original SVN commit messages.

This commit was SVN r24981.
2011-08-03 13:02:45 +00:00
Jeff Squyres
7d39eed7ed Update to m4 1.4.16, AM 1.11.1, AC 2.68, and LT 2.4 per
http://www.open-mpi.org/community/lists/devel/2011/07/9492.php. 

This commit was SVN r24870.
2011-07-10 13:19:09 +00:00
Jeff Squyres
dd2e57f41c Make the HTML man page script a little more robust
This commit was SVN r24539.
2011-03-17 15:09:23 +00:00
Nadia Derbey
af30f53556 Committed for D. Guinier: The new env variable MPI_ROOT facilitate launch script creation. It is asked by customers who use BPS and LSF batch manager
This commit was SVN r24465.
2011-02-25 14:40:49 +00:00
Jeff Squyres
3f4d4886f2 Minor update for something that has been bugging me for quite a while:
OMPI supports multiple different repository systems (SVN, hg, git).
But the VERSION file has listed "want_svn" and "svn_r" as fields, even
though the actual repo system and version may not be SVN.

So search/replace those fields (and derrivative values that come from
those fields) with "want_repo_rev" and "repo_rev", respectively.

This commit was SVN r24405.
2011-02-16 22:53:23 +00:00
Jeff Squyres
dcb8f4b633 Use rman (http://sourceforge.net/projects/polyglotman/) to generate
HTML web pages; html2man cut a bunch of them off for no reason.  Tweak
up the html generation process a bit and add some docs at the top of
the script to remind me how to use this script when I come back to it
again in 6 months...

This commit was SVN r23877.
2010-10-08 18:00:37 +00:00
Jeff Squyres
6e88176050 Oops -- need 2 dashes, not one.
This commit was SVN r23794.
2010-09-23 13:21:00 +00:00
Ralph Castain
40a2bfa238 WARNING: Work on the temp branch being merged here encountered problems with bugs in subversion. Considerable effort has gone into validating the branch. However, not all conditions can be checked, so users are cautioned that it may be advisable to not update from the trunk for a few days to allow MTT to identify platform-specific issues.
This merges the branch containing the revamped build system based around converting autogen from a bash script to a Perl program. Jeff has provided emails explaining the features contained in the change.

Please note that configure requirements on components HAVE CHANGED. For example. a configure.params file is no longer required in each component directory. See Jeff's emails for an explanation.

This commit was SVN r23764.
2010-09-17 23:04:06 +00:00
Jeff Squyres
9ca4a4a154 Make it safe to call this script inside of an Open MPI tarball (not
just an SVN or HG checkout).

This commit was SVN r23528.
2010-07-28 17:22:04 +00:00
Jeff Squyres
ad95e00b42 Remove an extraneous/misleading comment.
This commit was SVN r23320.
2010-06-29 14:42:03 +00:00
Jeff Squyres
9ac56c8674 Add "-j4" into the flags passed when we "make distcheck" (these flags
don't help when just running "make dist").  On my (somewhat older)
machines, it cut the wall clock time of make_dist_tarball down from
~55 minutes to ~40 minutes.

This commit was SVN r23318.
2010-06-29 14:32:20 +00:00
Ralph Castain
9ba3459135 Use the correct command to revert VERSION when making tarballs
This commit was SVN r23276.
2010-06-17 04:19:42 +00:00