mark the "self" peer OMPI_OSC_RDMA_PEER_LOCAL_BASE when
the window is dynamically created and use_cpu_atomics is set
in order to correctly handle communications to self.
Thanks Bart Janssens for reporting this issue.
Refs. open-mpi/ompi#6394
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
Place the content of common_ucx_int.h back to the common_ucx.h and
include common_ucx_wpool.h explicitly.
Signed-off-by: Artem Polyakov <artpol84@gmail.com>
Updated the OFI MTL's Recv cancel to be a non-blocking call to match
the MPI spec. Given fi_cancel succeeded, then it is expected that the
user will wait on the request to read the result of if the cancel has
completed.
Signed-off-by: Spruit, Neil R <neil.r.spruit@intel.com
For remote node peers pack smaller worker address, which contains
network device addresses only. This would reduce amount of OOB traffic
during startup.
Signed-off-by: Mikhail Brinskii <mikhailb@mellanox.com>
For the non thread-grouping paths, only the first (0th) OFI context
should be used for communication. Otherwise this would access a non existant
array item and cause segfault.
While at it, clarifiy some content regarding SEPs in README (Credit to Matias Cabral
for README edits).
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@intel.com>
Update the OPAL_CHECK_OFI configury macro:
- Make it safe to call the macro multiple times:
- The checks only execute the first time it is invoked
- Subsequent invocations, it just emits a friendly "checking..."
message so that configure output is sensible/logical
- With the goal of ultimately removing opal/mca/common/ofi, rename the
output variables from OPAL_CHECK_OFI to be
opal_ofi_{happy|CPPFLAGS|LDFLAGS|LIBS}.
- Update btl/ofi, btl/usnic, and mtl/ofi for these new conventions.
- Also, don't use AC_REQUIRE to invoke OPAL_CHECK_OFI because that
causes the macro to be invoked at a fairly random time, which makes
configure stdout confusing / hard to grok.
- Remove a little left-over kruft in OPAL_CHECK_OFI, too (which
resulted in an indenting change, making the change to
opal_check_ofi.m4 look larger than it really is).
Thanks Alastair McKinstry for the report and initial fix.
Thanks Rashika Kheria for the reminder.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
... and add `MPI_COMPLEX4`.
This commit changes values of existing `OMPI_DATATYPE_MPI_*` macros.
This change does not affect ABI compatibility of `libmpi.so` and the
like because these values are only used in OMPI internal code.
On the other hand, `ompi_datatype_t::id` values of existing datatypes
are not changed and 73 is newly assigned to for `MPI_COMPLEX4` to
retain ABI compatibility.
Signed-off-by: KAWASHIMA Takahiro <t-kawashima@jp.fujitsu.com>
... and `ompi_mpi_c_short_float_complex` and `ompi_mpi_cxx_sfltcplex`.
These are Open MPI internal variables intended to be defined as
`MPI_SHORT_FLOAT`, `MPI_C_SHORT_FLOAT_COMPLEX`, and
`MPI_CXX_SHORT_FLOAT_COMPLEX` in the future.
`OMPI_DATATYPE_MPI_C_SHORT_FLOAT_COMPLEX` is also required to
support `MPI_COMPLEX4` in the next commit.
Signed-off-by: KAWASHIMA Takahiro <t-kawashima@jp.fujitsu.com>
The type `short float` is proposed for the C language in ISO/IEC JTC
1/SC 22 WG 14 (C WG) for mainly IEEE 754-2008 binary16, a.k.a.
half-precision floating point or FP16.
By this commit, `short float` and `short float _Complex` are detected
in `configure` and used in Open MPI internal code. `MPI_SHORT_FLOAT`
and its complex number version are not added yet.
This commit changes values of existing `OPAL_DATATYPE_*` macros.
This change does not affect ABI compatibility of `libmpi.so` and the
like because these values are only used in OPAL and OMPI internal code.
Signed-off-by: KAWASHIMA Takahiro <t-kawashima@jp.fujitsu.com>
treematch/km_partitioning.c #include "config.h",
but there is no such file when the embedded treematch is used.
In order to prevent the embedded treematch from incorrectly using
the config.h from the embedded hwloc, generate a dummy config.h.
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
When we exceed the threshold number of contexts created, print appropriate help
text
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@intel.com>
We missed an assert to check if ALLOW_OVERTAKE is set or not before
validating the sequence number and this will cause deadlock.
Signed-off-by: Thananon Patinyasakdikul <tpatinya@utk.edu>
Provide the av_attr.count hint (number of addresses that will be
inserted into the address vector through the life of the process)
at initialization of the address vector. It's ok to be a bit
wrong, but some endpoints (RxR) can benefit by not going through
the slow growth realloc churn.
Signed-off-by: Brian Barrett <bbarrett@amazon.com>
This commit fixes a problem reported on the mailing list with
individual writes larger than 512 MB.
The culprit is a floating point division of two large, close values.
Changing the datatypes from float to double (which is what is being
used in the fcoll components) fixes the problem.
See issue #6285 and
https://forum.hdfgroup.org/t/cannot-write-more-than-512-mb-in-1d/5118
Thanks for Axel Huebl and René Widera for reporting the issue.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
With MTLs, there's no "other transport" when the remote side
does not have an active NIC, so we should print a useful error
message when the modex failed (indicating lack of a NIC on
the remote side).
Signed-off-by: Brian Barrett <bbarrett@amazon.com>
Similar to #6286 rounding number of bytes into a single precision floating point value to round up the result of a division is a potential risk due to rounding errors.
- remove floating point operations for `round up`
- removes floating point conversion for round down (native behavior of integer division)
Signed-off-by: René Widera <r.widera@hzdr.de>
Moving to a model where we have users actively _enable_ SEP feature for use
rather than opening SEP by default if provider supports it. This allows us to
not regress (either functionally or for performance reasons) any apps that were
working correctly on regular endpoints.
Also, providing MCA to specify number of OFI contexts to create and default
this value to 1 (Given btl/ofi also creates one by default, this reduces the
incidence of a scenario where we allocate all available contexts by default and
if btl/ofi asks for one more, then provider breaks as it doesn't support it).
While at it, spruce up README on SEP content.
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@intel.com>
This commit fixes a bug when launching with prun where the process
info structures used by the btls are not populated.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
-> Added new targets in Makefile.am to call a new build script
generate-opt-funcs.pl to generate specialized functions for
each *.pm file.
-> Added new perl module *.pm files for send,isend,irecv,iprobe,improbe
which are loaded by generate-opt-funcs.pl to create new source files
that correspond to the name of the .pm file to be used as part of
MTL OFI.
-> Added mtl_ofi_opt.pm.template and updated README with details on the
specialization features and how to add additional specialization
support.
-> Added new opt_common/mtl_ofi_opt_common.pm containing common
functions for generating the specialized functions used by
all other *.pm modules.
-> Added new mtl_ofi.h which includes the definitions for the
function symbol table for storing the specialized functions along
with the definitions for the initialization functions for the
corresponding function pointers.
-> Based off the OFI provider capabilities the specialized function
pointers are assigned at mtl_ofi_component_init to the corresponding
MTL OFI function.
-> mca_mtl_ofi_module_t has been updated with the symbol table
struct which is assigned at component init.
Signed-off-by: Spruit, Neil R <neil.r.spruit@intel.com>
For cases when the number of local processes is greater than the number of
available contexts, the SEP initialization phase would calculate the number of
contexts to provision for each rank to be 0 and would eventually crash.
Fix the issue here by using regular endpoints in the event the number of local
processes is more than available contexts. This fixes issue #6182.
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@intel.com>
Commit 109d0569ffd introduced a crash when an error occurred
before ofi_ctxt was allocated, including when no providers
passed the selection logic. Properly check that the pointer
is not NULL in the error cleanup code before dereferencing
the pointer.
Signed-off-by: Brian Barrett <bbarrett@amazon.com>
