1
1

27 Коммитов

Автор SHA1 Сообщение Дата
Galen Shipman
3401bd2b07 Add optional ordering to the BTL interface.
This is required to tighten up the BTL semantics. Ordering is not guaranteed,
but, if the BTL returns a order tag in a descriptor (other than
MCA_BTL_NO_ORDER) then we may request another descriptor that will obey
ordering w.r.t. to the other descriptor.


This will allow sane behavior for RDMA networks, where local completion of an
RDMA operation on the active side does not imply remote completion on the
passive side. If we send a FIN message after local completion and the FIN is
not ordered w.r.t. the RDMA operation then badness may occur as the passive
side may now try to deregister the memory and the RDMA operation may still be
pending on the passive side. 

Note that this has no impact on networks that don't suffer from this
limitation as the ORDER tag can simply always be specified as
MCA_BTL_NO_ORDER.

This commit was SVN r14768.
2007-05-24 19:51:26 +00:00
Gleb Natapov
3ebaff8dfe Implement new BTL parameters:
We eagerly send data up to btl_*_eager_limit with the match
Upon ACK of the MATCH we start using send/receives of size
btl_*_max_send_size up to the btl_*_rdma_pipeline_offset
After the btl_*_rdma_pipeline_offset we begin using RDMA writes of
size btl_*_rdma_pipeline_frag_size.

Now, on a per message basis we only use the above protocol if the
message is larger than btl_*_min_rdma_pipeline_size

btl_*_eager_limit - > same
btl_*_max_send_size -> same
btl_*_rdma_pipeline_offset -> btl_*_min_rdma_size
btl_*_rdma_pipeline_frag_size -> btl_*_max_rdma_size


btl_*_min_rdma_pipeline_size is new..

This patch also moves all BTL common parameters initialisation into
btl_base_mca.c file.

This commit was SVN r14681.
2007-05-17 07:54:27 +00:00
Gleb Natapov
d41ca417e8 Delete declaration of non-existent functions and no longer relevant comment.
This commit was SVN r14341.
2007-04-12 08:12:31 +00:00
Li-Ta Lo
ec8a859a44 fixed typo
This commit was SVN r14207.
2007-04-03 17:21:54 +00:00
Gleb Natapov
e5450613b5 Add new SM BTL parameter btl_sm_cb_max_num. If set to value greater then zero
it limits the number of circular buffers allocated between each pair of peers.
This allows for more tight memory usage control.

This commit was SVN r14120.
2007-03-22 12:21:42 +00:00
Gleb Natapov
e551c5f1a3 Get rid of separate sm BTL for different shared memory base addresses. Now,
when we precalculate most of the addresses there is no point to have separate
BTL for this. The sm_progress() code become much more simple as a result.

This commit was SVN r14071.
2007-03-20 08:15:58 +00:00
Josh Hursey
dadca7da88 Merging in the jjhursey-ft-cr-stable branch (r13912 : HEAD).
This merge adds Checkpoint/Restart support to Open MPI. The initial
frameworks and components support a LAM/MPI-like implementation.

This commit follows the risk assessment presented to the Open MPI core
development group on Feb. 22, 2007.

This commit closes trac:158

More details to follow.

This commit was SVN r14051.

The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
  r13912

The following Trac tickets were found above:
  Ticket 158 --> https://svn.open-mpi.org/trac/ompi/ticket/158
2007-03-16 23:11:45 +00:00
Gleb Natapov
90fb58de4f When frags are allocated from mpool by free_list the frag structure is also
allocated from mpool memory (which is registered memory for RDMA transports)
This is not a problem for a small jobs, but for a big number of ranks an
amount of waisted memory is big.

This commit was SVN r13921.
2007-03-05 14:17:50 +00:00
Gleb Natapov
4d4b0a022a Add error callback to sm BTL. Call it when allocation of the initial circular
buffer fails. If cb is already allocated, but it is full and allocation of
additional cb fails, we spin waiting for receiver to free space in existing
cb.

This commit was SVN r13635.
2007-02-13 12:01:36 +00:00
George Bosilca
d7268557a8 Complete the SM BTL changes. Now all displacements are ptrdiff_t and there is
no warnings about any issue with signed/unsigned.

This commit was SVN r12234.
2006-10-20 19:28:12 +00:00
George Bosilca
c86214f420 Fix the SM BTL issues. The problem seems to come from the fact that
the maximum number of nodes on the SM file should be signed, as we use
the -1 to unlimit it.

This commit was SVN r12227.
2006-10-20 17:25:53 +00:00
George Bosilca
06563b5dec Last set of explicit conversions. We are now close to the zero warnings on
all platforms. The only exceptions (and I will not deal with them
anytime soon) are on Windows:
- the write functions which require the length to be an int when it's
  a size_t on all UNIX variants.
- all iovec manipulation functions where the iov_len is again an int
  when it's a size_t on most of the UNIXes.
As these only happens on Windows, so I think we're set for now :)

This commit was SVN r12215.
2006-10-20 03:57:44 +00:00
George Bosilca
a3ad4a7fc8 The visibility flags (and/or Windows friendly export) is now on for all BTLs.
This commit was SVN r11662.
2006-09-14 22:19:39 +00:00
George Bosilca
3f0a7cad9e The last patch for Windows support. Mostly casting and conversion to C++ friendly headers.
This commit was SVN r11400.
2006-08-24 16:38:08 +00:00
Galen Shipman
e5c594c211 More updates for the async error handler for btl's
In order to provide backwards compatability the framework versions are bumped
and the handler registeration function is at the end of the btl struct.
Testing done on sm, openib, and gm.. 

This commit was SVN r11256.
2006-08-17 22:02:01 +00:00
Tim Woodall
350d5b1713 change hardcoded values into mca params
This commit was SVN r9815.
2006-05-04 15:20:18 +00:00
Brian Barrett
566a050c23 Next step in the project split, mainly source code re-arranging
- move files out of toplevel include/ and etc/, moving it into the
    sub-projects
  - rather than including config headers with <project>/include, 
    have them as <project>
  - require all headers to be included with a project prefix, with
    the exception of the config headers ({opal,orte,ompi}_config.h
    mpi.h, and mpif.h)

This commit was SVN r8985.
2006-02-12 01:33:29 +00:00
George Bosilca
7baae4f394 Protect the headers and remove the unused ones.
This commit was SVN r8439.
2005-12-10 22:04:28 +00:00
Jeff Squyres
42ec26e640 Update the copyright notices for IU and UTK.
This commit was SVN r7999.
2005-11-05 19:57:48 +00:00
George Bosilca
1b031c153b Last commit to make the threaded case compiling without warnings. Next step try to make it working ...
Correct the spring of the vpid problem (similar to the one in the SM PTL).

Add one more argument to the MCA_BTL_SM_FIFO_WRITE macro who will get passed down to the 
MCA_BTL_SM_SIGNAL_PEER macro to allow it to have the fifo_fd file descriptor.

This commit was SVN r7305.
2005-09-11 20:55:22 +00:00
Jeff Squyres
84bc5214e9 Convert sm btl to use new OMPI_PROC_FLAG_LOCAL instead of the modex.
This commit was SVN r6522.
2005-07-15 15:22:41 +00:00
Brian Barrett
68b91e85ed * add checks for the hton and ntoh functions, since they don't exist on
Red Storm.  Add stub functions to ompi_config_bottom.h when they are
  around
* Add protection for a bunch of #include <netinet/in.h>s
* Fix up the Portals BTL so that it compiles on Red Storm and has the
  right mojo for initialization on Red Storm
* Add some important comments to ompi_check_package and mvapi configures
* Add support for platforms without getpwuid() (aka, Red Storm). 

This commit was SVN r6478.
2005-07-14 04:11:59 +00:00
Brian Barrett
a13166b500 * rename ompi_output to opal_output
This commit was SVN r6329.
2005-07-03 23:31:27 +00:00
Brian Barrett
23b687b0f4 * rename ompi_event to opal_event
This commit was SVN r6328.
2005-07-03 23:09:55 +00:00
Brian Barrett
39dbeeedfb * rename locking code from ompi to opal
This commit was SVN r6327.
2005-07-03 22:45:48 +00:00
Brian Barrett
499e4de1e7 * rename ompi_object and ompi_class to opal_object and opal_class
This commit was SVN r6321.
2005-07-03 16:06:07 +00:00
Jeff Squyres
4ab17f019b Rename src -> ompi
This commit was SVN r6269.
2005-07-02 13:43:57 +00:00