1
1
Граф коммитов

12 Коммитов

Автор SHA1 Сообщение Дата
Ralph Castain
64d43cc44b Fix the unity routed component and direct xcast mode.
Ensure that direct xcast handles all its use-cases correctly.

Unity routed component needs to use the base recv function to properly operate.

This commit was SVN r17764.
2008-03-06 18:13:05 +00:00
Ralph Castain
ff99aa054f In order to prevent orphaned processes when using non-unity routing methods, the procs need to realize that their local daemon is a critical connection - if that connection unexpectedly closes, they need to terminate.
This commit adds definition for a "lifeline" connection. For an HNP, there is no lifeline, so the lifeline proc is NULL. For a daemon, the lifeline is the HNP - the daemon should abort if it loses that connection.

For a proc using unity routed, the lifeline is the HNP since it connects directly to the HNP.

For a proc using tree routed, the lifeline is the local daemon.

Adjusted OOB to call abort if the lifeline (as opposed to HNP) connection is lost.

This commit was SVN r17761.
2008-03-06 15:30:44 +00:00
Tim Prins
d56f19c77d Fix logic error, and remove uneeded checks for invalid results.
This commit was SVN r17756.
2008-03-06 04:38:13 +00:00
Tim Prins
5de3e1965e Remove the orte_proc_table. Migrate all users of it to the opal_hash_table and a new name hash function in orte.
Everything should work, however I am unable to compile and test the sctp BTL.

This commit was SVN r17751.
2008-03-05 22:44:35 +00:00
Ralph Castain
5e6928d710 Cleanup recursions in ORTE caused by processing recv'd messages that can cause the system to take action resulting in receipt of another message.
Basically, the method employed here is to have a recv create a zero-time timer event that causes the event library to execute a function that processes the message once the recv returns. Thus, any action taken as a result of processing the message occur outside of a recv.

Created two new macros to assist:

ORTE_MESSAGE_EVENT: creates the zero-time event, passing info in a new orte_message_event_t object

ORTE_PROGRESSED_WAIT: while waiting for specified conditions, just calls progress so messages can be recv'd.

Also fixed the failed_launch function as we no longer block in the orted callback function. Updated the error messages to reflect revision. No change in API to this function, but PLM "owners" may want to check their internal error messages to avoid duplication and excessive output.

This has been tested on Mac, TM, and SLURM.

This commit was SVN r17647.
2008-02-28 19:58:32 +00:00
Ralph Castain
d70e2e8c2b Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately.
Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer

This commit was SVN r17632.
2008-02-28 01:57:57 +00:00
Jeff Squyres
213b5d5c6e Per long threads on the mailing list and much confusion discussion
about linkers, have all OPAL, ORTE, and OMPI components '''not'' link
against the OPAL, ORTE, or OMPI libraries.

See ttp://www.open-mpi.org/community/lists/users/2007/10/4220.php for
details (or https://svn.open-mpi.org/trac/ompi/wiki/Linkers for a
better-formatted version of the same info).

This commit was SVN r16968.
2007-12-15 13:32:02 +00:00
Ralph Castain
ec5fe78876 When in the unity message routing mode, we have to update the RML contact info in the parent procs so that they know how to talk to the children. Ideally, this would be done in the MPI layer since that layer knows which procs are actively involved in the comm_spawn. However, it isn't being done there, which causes comm_spawn to fail, so do it explicitly in the RTE.
Note that this means ALL procs in the parent job are updated, even though they may not be participating in the comm_spawn. This doesn't really hurt anything - just unnecessary.

Comm_spawn still has a problem when a child process shares a node with a parent, so this doesn't fix everything. It only fixes the bug of ensuring all procs know how to talk to each other.

This commit was SVN r16460.
2007-10-16 16:09:41 +00:00
Ralph Castain
3dbd4d9be7 Squeeeeeeze the launch message. This is the message sent to the daemons that provides all the data required for launching their local procs. In reorganizing the ODLS framework, I discovered that we were sending a significant amount of unnecessary and repeated data. This commit resolves this by:
1. taking advantage of the fact that we no longer create the launch  message via a GPR trigger. In earlier times, we had the GPR create the launch message based on a subscription. In that mode of operation, we could not guarantee the order in which the data was stored in the message - hence, we had no choice but to parse the message in a loop that checked each value against a list of possible "keys" until the corresponding value was found.

Now, however, we construct the message "by hand", so we know precisely what data is in each location in the message. Thus, we no longer need to send the character string "keys" for each data value any more. This represents a rather large savings in the message size - to give you an example, we typically would use a 30-char "key" for a 2-byte data value. As you can see, the overhead can become very large.

2. sending node-specific data only once. Again, because we used to construct the message via subscriptions that were done on a per-proc basis, the data for each node (e.g., the daemon's name, whether or not the node was oversubscribed) would be included in the data for each proc. Thus, the node-specific data was repeated for every proc.

Now that we construct the message "by hand", there is no reason to do this any more. Instead, we can insert the data for a specific node only once, and then provide the per-proc data for that node. We therefore not only save all that extra data in the message, but we also only need to parse the per-node data once.

The savings become significant at scale. Here is a comparison between the revised trunk and the trunk prior to this commit (all data was taken on odin, using openib, 64 nodes, unity message routing, tested with application consisting of mpi_init/mpi_barrier/mpi_finalize, all execution times given in seconds, all launch message sizes in bytes):

Per-node scaling, taken at 1ppn:

#nodes           original trunk                         revised trunk
             time               size                time               size
      1      0.10                819                0.09                564
      2      0.14               1070                0.14                677
      3      0.15               1321                0.14                790
      4      0.15               1572                0.15                903
      8      0.17               2576                0.20               1355
     16      0.25               4584                0.21               2259
     32      0.28               8600                0.27               4067
     64      0.50              16632                0.39               7683

Per-proc scaling, taken at 64 nodes

   ppn             original trunk                         revised trunk
              time               size                time               size
      1       0.50              16669                0.40               7720
      2       0.55              32733                0.54              11048
      3       0.87              48797                0.81              14376
      4       1.0               64861                0.85              17704


Condensing those numbers, it appears we gained:

per-node message size: 251 bytes/node -> 113 bytes/node

per-proc message size: 251 bytes/proc  -> 52 bytes/proc

per-job message size:  568 bytes/job -> 399 bytes/job 
(job-specific data such as jobid, override oversubscribe flag, total #procs in job, total slots allocated)

The fact that the two pre-commit trunk numbers are the same confirms the fact that each proc was containing the node data as well. It isn't quite the 10x message reduction I had hoped to get, but it is significant and gives much better scaling.

Note that the timing info was, as usual, pretty chaotic - the numbers cited here were typical across several runs taken after the initial one to avoid NFS file positioning influences.

Also note that this commit removes the orte_process_info.vpid_start field and the handful of places that passed that useless value. By definition, all jobs start at vpid=0, so all we were doing is passing "0" around. In fact, many places simply hardwired it to "0" anyway rather than deal with it.

This commit was SVN r16428.
2007-10-11 15:57:26 +00:00
Ralph Castain
54b2cf747e These changes were mostly captured in a prior RFC (except for #2 below) and are aimed specifically at improving startup performance and setting up the remaining modifications described in that RFC.
The commit has been tested for C/R and Cray operations, and on Odin (SLURM, rsh) and RoadRunner (TM). I tried to update all environments, but obviously could not test them. I know that Windows needs some work, and have highlighted what is know to be needed in the odls process component.

This represents a lot of work by Brian, Tim P, Josh, and myself, with much advice from Jeff and others. For posterity, I have appended a copy of the email describing the work that was done:

As we have repeatedly noted, the modex operation in MPI_Init is the single greatest consumer of time during startup. To-date, we have executed that operation as an ORTE stage gate that held the process until a startup message containing all required modex (and OOB contact info - see #3 below) info could be sent to it. Each process would send its data to the HNP's registry, which assembled and sent the message when all processes had reported in.

In addition, ORTE had taken responsibility for monitoring process status as it progressed through a series of "stage gates". The process reported its status at each gate, and ORTE would then send a "release" message once all procs had reported in.

The incoming changes revamp these procedures in three ways:

1. eliminating the ORTE stage gate system and cleanly delineating responsibility between the OMPI and ORTE layers for MPI init/finalize. The modex stage gate (STG1) has been replaced by a collective operation in the modex itself that performs an allgather on the required modex info. The allgather is implemented using the orte_grpcomm framework since the BTL's are not active at that point. At the moment, the grpcomm framework only has a "basic" component analogous to OMPI's "basic" coll framework - I would recommend that the MPI team create additional, more advanced components to improve performance of this step.

The other stage gates have been replaced by orte_grpcomm barrier functions. We tried to use MPI barriers instead (since the BTL's are active at that point), but - as we discussed on the telecon - these are not currently true barriers so the job would hang when we fell through while messages were still in process. Note that the grpcomm barrier doesn't actually resolve that problem, but Brian has pointed out that we are unlikely to ever see it violated. Again, you might want to spend a little time on an advanced barrier algorithm as the one in "basic" is very simplistic.

Summarizing this change: ORTE no longer tracks process state nor has direct responsibility for synchronizing jobs. This is now done via collective operations within the MPI layer, albeit using ORTE collective communication services. I -strongly- urge the MPI team to implement advanced collective algorithms to improve the performance of this critical procedure.


2. reducing the volume of data exchanged during modex. Data in the modex consisted of the process name, the name of the node where that process is located (expressed as a string), plus a string representation of all contact info. The nodename was required in order for the modex to determine if the process was local or not - in addition, some people like to have it to print pretty error messages when a connection failed.

The size of this data has been reduced in three ways:

(a) reducing the size of the process name itself. The process name consisted of two 32-bit fields for the jobid and vpid. This is far larger than any current system, or system likely to exist in the near future, can support. Accordingly, the default size of these fields has been reduced to 16-bits, which means you can have 32k procs in each of 32k jobs. Since the daemons must have a vpid, and we require one daemon/node, this also restricts the default configuration to 32k nodes.

To support any future "mega-clusters", a configuration option --enable-jumbo-apps has been added. This option increases the jobid and vpid field sizes to 32-bits. Someday, if necessary, someone can add yet another option to increase them to 64-bits, I suppose.

(b) replacing the string nodename with an integer nodeid. Since we have one daemon/node, the nodeid corresponds to the local daemon's vpid. This replaces an often lengthy string with only 2 (or at most 4) bytes, a substantial reduction.

(c) when the mca param requesting that nodenames be sent to support pretty error messages, a second mca param is now used to request FQDN - otherwise, the domain name is stripped (by default) from the message to save space. If someone wants to combine those into a single param somehow (perhaps with an argument?), they are welcome to do so - I didn't want to alter what people are already using.

While these may seem like small savings, they actually amount to a significant impact when aggregated across the entire modex operation. Since every proc must receive the modex data regardless of the collective used to send it, just reducing the size of the process name removes nearly 400MBytes of communication from a 32k proc job (admittedly, much of this comm may occur in parallel). So it does add up pretty quickly.


3. routing RML messages to reduce connections. The default messaging system remains point-to-point - i.e., each proc opens a socket to every proc it communicates with and sends its messages directly. A new option uses the orteds as routers - i.e., each proc only opens a single socket to its local orted. All messages are sent from the proc to the orted, which forwards the message to the orted on the node where the intended recipient proc is located - that orted then forwards the message to its local proc (the recipient). This greatly reduces the connection storm we have encountered during startup.

It also has the benefit of removing the sharing of every proc's OOB contact with every other proc. The orted routing tables are populated during launch since every orted gets a map of where every proc is being placed. Each proc, therefore, only needs to know the contact info for its local daemon, which is passed in via the environment when the proc is fork/exec'd by the daemon. This alone removes ~50 bytes/process of communication that was in the current STG1 startup message - so for our 32k proc job, this saves us roughly 32k*50 = 1.6MBytes sent to 32k procs = 51GBytes of messaging.

Note that you can use the new routing method by specifying -mca routed tree - if you so desire. This mode will become the default at some point in the future.


There are a few minor additional changes in the commit that I'll just note in passing:

* propagation of command line mca params to the orteds - fixes ticket #1073. See note there for details.

* requiring of "finalize" prior to "exit" for MPI procs - fixes ticket #1144. See note there for details.

* cleanup of some stale header files

This commit was SVN r16364.
2007-10-05 19:48:23 +00:00
George Bosilca
c961cb5749 The Windows support is now back in bussiness.
This commit was SVN r15599.
2007-07-25 03:55:34 +00:00
Brian Barrett
39a6057fc6 A number of improvements / changes to the RML/OOB layers:
* General TCP cleanup for OPAL / ORTE
  * Simplifying the OOB by moving much of the logic into the RML
  * Allowing the OOB RML component to do routing of messages
  * Adding a component framework for handling routing tables
  * Moving the xcast functionality from the OOB base to its own framework

Includes merge from tmp/bwb-oob-rml-merge revisions:

    r15506, r15507, r15508, r15510, r15511, r15512, r15513

This commit was SVN r15528.

The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
  r15506
  r15507
  r15508
  r15510
  r15511
  r15512
  r15513
2007-07-20 01:34:02 +00:00