If IBCM was explicitly specified with exclude/include parameter,
OpenIB BTL will enable verbose report for "/dev/infiniband/ucm" error,
other way the error will not be reported.
This commit was SVN r18868.
first to the trunk. So, here is the trunk checkin:
The call to orte_show_help() to notify truncation of the max_inline value
was missing the want_error_header boolean, which eventually results in
a SEGV. This change corrects the call with the bool set to true.
This commit was SVN r18839.
see how the next gen panasas stuff does in terms of warnings; we can
always re-merge this later if we want to. It's just easier if we have
as little OMPI-specific code as possible (particularly when we know
that the panasas code has some big changes coming).
This commit was SVN r18823.
The following SVN revision numbers were found above:
r17543 --> open-mpi/ompi@b4ec81a9fd
already, and we're just about to do a ROMIO version refresh -- so the
less OMPI-specific code we have (e.g., indenting and whatnot), the
better.
Refs trac:1370.
This commit was SVN r18821.
The following SVN revision numbers were found above:
r16691 --> open-mpi/ompi@8dca19cb3b
r16693 --> open-mpi/ompi@037a533752
The following Trac tickets were found above:
Ticket 1370 --> https://svn.open-mpi.org/trac/ompi/ticket/1370
ROMIO in Open MPI (the new version of ROMIO will make this patch
defunct, and David Daniel has confirmed that no one at LANL is using
this functionality, anyway).
Refs trac:1370.
This commit was SVN r18819.
The following Trac tickets were found above:
Ticket 1370 --> https://svn.open-mpi.org/trac/ompi/ticket/1370
hierarch disables itself now if the pml module used is *not* ob1. The reason
is, that the multi-level hierarchy detection algorithm checks the names of the
btl modules used. In case there are no btl's, we would segfault.
Furthermore, three minor changes:
- the 2-level hierarchy detection is now the default (sm vs. everything else
in the world).
- add udapl to the list of protocols checked for by the multi-level hierarch detection
- some of the verbose statements of hierarch were inaccurate. Fixed those comments/messages.
This commit was SVN r18817.
1. repair of the linear and direct routed modules
2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI
3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature
4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes.
Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB
5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept.
Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules.
6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch
7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch
8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies
9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc.
10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon
There is still more cleanup to be done for efficiency, but this at least works.
Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn.
Fixes ticket #1256
This commit was SVN r18804.
* Move the passive side QP move to RTS to before we send the reply
(vs. sending it after we get the RTU). A lengthy comment explains
the need for this.
* Add some timers to the code for analyzing where time is spent.
* Clarify a few error messages.
* Currently have a loop around ib_cm_listen() because sometimes it
fails for seeminly no reason. Have pending e-mails in to Sean
Hefty to see if we can figure out why this is happening. Note that
the more MPI processes you add, the more likely this error is to
occur (e.g., ran 720 processes and it happens at least 50% of the
time). This makes IBCM somewhat unattractive for general use;
hopefully we can get a fix...
This commit was SVN r18766.
endpoint.c) because it's almost identical in all the CPC's. OOB,
XOOB, and IBCM now all invoke the btl error handler properly if
there's an error during wireup. RDMACM still needs to be done.
This commit was SVN r18764.
The following SVN revision numbers were found above:
r18762 --> open-mpi/ompi@3eda04578f
upper level btl (and therefore the PML) when something goes wrong
during wireup.
Refs trac:1283.
This commit was SVN r18762.
The following Trac tickets were found above:
Ticket 1283 --> https://svn.open-mpi.org/trac/ompi/ticket/1283
* Properly handle non-symmetric subnet ID's
* Be a bit more stringent when checking for the GID
* Add lots of BTL_VERBOSE's for diagnostics
This commit was SVN r18754.
as the send and the put share the same execution path and in the case of the
put the MCA_BTL_DES_SEND_ALWAYS_CALLBACK was not set.
This commit was SVN r18735.
ompi_info will crash due to a reference to a unalloced struct. Add a check for
this struct to prevent this crash.
This commit was SVN r18727.
The following SVN revision numbers were found above:
r18725 --> open-mpi/ompi@c2351d39f1
If rdmacm cpc is disabled and an iwarp device is forced to be used, then
mca_btl_openib_get_iwarp_subnet_id will attempt to reference an uninitalized
list. Modify the code to check for the uninitalized list and return zero.
Also, fix a memory leak caused by not freeing alloced addresses structs during
shutdown.
This commit was SVN r18725.
the fragments that failed to be send, there is no need to replicate the same
mechanism in the BTL.
Force the SM BTL to empty all ack fragments in the component progress function.
This commit was SVN r18724.
INI file use_eager_rdma value (fixes trac:1169)
* fixed a typo in a MCA param help message
* made the check for enabling short/eager RDMA more robust in the
presence of progress threads; it now emits a show_help warning
This commit was SVN r18723.
The following Trac tickets were found above:
Ticket 1169 --> https://svn.open-mpi.org/trac/ompi/ticket/1169
specified, probe for max value supported by device.
This commit was SVN r18720.
The following Trac tickets were found above:
Ticket 1355 --> https://svn.open-mpi.org/trac/ompi/ticket/1355
* Ensure to destroy the correct QP (local->id[num]->qp will always
have a valid pointer in it, even if we setup a dummy qp)
* Note two notable places where we need to figure out how to
propagate errors up from the CPC to the main BTL / PML when errors
occur. Probably have the same issue in IBCM, too.
This commit was SVN r18700.
two processes on the same server (!). So for today, we'll simply mark
all local processes that use iWARP adapters as "unreachable".
More details in #1352.
This commit was SVN r18699.
(e.g., if you're excluding some devices, their destructors will be
invoked before the async event thread was setup for them).
This commit was SVN r18698.
multiple adapters (eg., Chelsio T3).
But we need to figure out how to determine a good value for the
resident adapter(s) at runtime. It's problematic because, for
example, Mellanox ConnectX and Chelsio T3 report max_inline values
differently at run-time. If you ibv_create_qp with a max_inline value
of 0, ConnectX reports back a value that is a formular based on a few
other values (e.g., max_send_sge and max_recv_sge). But T3 always
reports back "64".
We're looking into this to figure out the best way -- reducing the
default right now should allow other adapters to run while we figure
it out.
This commit was SVN r18697.
