Basically, the remaining problem turned out to be:
1. closing stdout/stderr during orte_finalize of mpirun
2. inadvertently setting up a write event on fd = -1
3. devising a scheme to more accurately track when the stdin write event was active vs closed so it only got released once
This passed prelim MTT testing by Jeff and Tim, but should soak for awhile before migrating to 1.3.
This commit was SVN r20106.
The following SVN revision numbers were found above:
r20064 --> open-mpi/ompi@a07660aea8
r20068 --> open-mpi/ompi@ec930d14a9
r20074 --> open-mpi/ompi@2940309613
1. a direct callback from waitpid - this set the waitpid_fired flag
2. a notify event callback from the IOF - this set the iof complete flag
3. a message via the daemon cmd processor from the proc "de-registering" the sync, thus indicating it was going through MPI_Finalize.
The problem is that these could overlap, with the first two allowing the orted to declare the proc complete before the daemon had responded to #3.
This change forces all three events to flow through the daemon cmd processor, thus ensuring an ordered handling. I'm not certain this will solve the problem, but will await further MTT reports to see. Unfortunately, the problem doesn't show up on any manual or script-based tests I have been able to run, even when I duplicate the exact cmd that fails under MTT.
This commit was SVN r20074.
1. coordination of job completion notification to include a requirement for both waitpid detection AND notification that all iof pipes have been closed by the app
2. change of all IOF read and write events to be non-persistent so they can properly be shutdown and restarted only when required
3. addition of a delay (currently set to 10ms) before restarting the stdin read event. This was required to ensure that the stdout, stderr, and stddiag read events had an opportunity to be serviced in scenarios where large files are attached to stdin.
This commit was SVN r20064.
1. modify the iof to track when a proc actually closes all of its open iof output pipes. When this occurs, notify the odls that the proc's iof is complete. This is done via a zero-time event so that we can step out of the read event before processing the notification.
2. in the odls, modify the waitpid callback so it only flags that it was called. Add a function to receive the iof-complete notification, and a function that checks for both iof complete and waitpid callback before declaring a proc fully terminated. This ensures that we read and deliver -all- of the IO prior to declaring the job complete.
Also modified the odls call to orte_iof.close (and the component's implementation) so it only closes stdin, leaving the other io channels alone. This fixes the other half of the known problem.
This should fix the ticket on this subject, but I'll wait to close it pending further testing in the trunk.
This commit was SVN r19991.
* fix an if condition so that we do the right thing when procs local to mpirun output to stderr
* ensure that tools can handle relays of 0-byte output, indicating that a process closed that io channel
This commit was SVN r19884.
The problem was that we close the same fd twice, and that meantime the fd could have been reassigned
to some other file or socket.
This commit was SVN r19869.
Without this patch, doing spawn in a loop ended up by exhausting all
available file descriptors pretty quickly. There were about 5 file
descriptors opened per spawned process. Now the number of file
descriptors managed by the process (orted or HNP)
is a lot smaller.
This commit was SVN r19864.
1. remove some stale files that were overlooked in original commit
2. add a test program and data to stress iof for stdin
3. cleanup a debug statement that caused memory corruption when reading large files
4. some minor cleanups to correctly handle xon/xoff scenarios
This commit was SVN r19792.
1. completely and cleanly separates responsibilities between the HNP, orted, and tool components.
2. removes all wireup messaging during launch and shutdown.
3. maintains flow control for stdin to avoid large-scale consumption of memory by orteds when large input files are forwarded. This is done using an xon/xoff protocol.
4. enables specification of stdin recipients on the mpirun cmd line. Allowed options include rank, "all", or "none". Default is rank 0.
5. creates a new MPI_Info key "ompi_stdin_target" that supports the above options for child jobs. Default is "none".
6. adds a new tool "orte-iof" that can connect to a running mpirun and display the output. Cmd line options allow selection of any combination of stdout, stderr, and stddiag. Default is stdout.
7. adds a new mpirun and orte-iof cmd line option "tag-output" that will tag each line of output with process name and stream ident. For example, "[1,0]<stdout>this is output"
This is not intended for the 1.3 release as it is a major change requiring considerable soak time.
This commit was SVN r19767.
* add "register" function to mca_base_component_t
* converted coll:basic and paffinity:linux and paffinity:solaris to
use this function
* we'll convert the rest over time (I'll file a ticket once all
this is committed)
* add 32 bytes of "reserved" space to the end of mca_base_component_t
and mca_base_component_data_2_0_0_t to make future upgrades
[slightly] easier
* new mca_base_component_t size: 196 bytes
* new mca_base_component_data_2_0_0_t size: 36 bytes
* MCA base version bumped to v2.0
* '''We now refuse to load components that are not MCA v2.0.x'''
* all MCA frameworks versions bumped to v2.0
* be a little more explicit about version numbers in the MCA base
* add big comment in mca.h about versioning philosophy
This commit was SVN r19073.
The following Trac tickets were found above:
Ticket 1392 --> https://svn.open-mpi.org/trac/ompi/ticket/1392
can have a pub_endpoint and a sub_endpoint that are not equal but go
to the same place (fd). I didn't think that that was possible. :-\
So just use a bool to track whether we have forwarded the fragment at
all; if we have, then don't forward to the sub_endpoint.
IOF is going to be re-written for v1.4.
This commit was SVN r18950.
The following SVN revision numbers were found above:
r18873 --> open-mpi/ompi@773c92a6eb
Short version: when the HNP launches VPID 0 on the same node as
itself, the STDIN IOF endpoint will have both a pub and a sub on it.
We need to ensure to only forward incoming messages ''once'' (not
twice, as was happening). A lengthy comment in the code explains in
more detail.
This commit was SVN r18873.
The following Trac tickets were found above:
Ticket 1135 --> https://svn.open-mpi.org/trac/ompi/ticket/1135
Some minor changes to help facilitate debugger support so that both mpirun and yod can operate with it. Still to be completed.
This commit was SVN r18664.
After much work by Jeff and myself, and quite a lot of discussion, it has become clear that we simply cannot resolve the infinite loops caused by RML-involved subsystems calling orte_output. The original rationale for the change to orte_output has also been reduced by shifting the output of XML-formatted vs human readable messages to an alternative approach.
I have globally replaced the orte_output/ORTE_OUTPUT calls in the code base, as well as the corresponding .h file name. I have test compiled and run this on the various environments within my reach, so hopefully this will prove minimally disruptive.
This commit was SVN r18619.
such, the commit message back to the master SVN repository is fairly
long.
= ORTE Job-Level Output Messages =
Add two new interfaces that should be used for all new code throughout
the ORTE and OMPI layers (we already make the search-and-replace on
the existing ORTE / OMPI layers):
* orte_output(): (and corresponding friends ORTE_OUTPUT,
orte_output_verbose, etc.) This function sends the output directly
to the HNP for processing as part of a job-specific output
channel. It supports all the same outputs as opal_output()
(syslog, file, stdout, stderr), but for stdout/stderr, the output
is sent to the HNP for processing and output. More on this below.
* orte_show_help(): This function is a drop-in-replacement for
opal_show_help(), with two differences in functionality:
1. the rendered text help message output is sent to the HNP for
display (rather than outputting directly into the process' stderr
stream)
1. the HNP detects duplicate help messages and does not display them
(so that you don't see the same error message N times, once from
each of your N MPI processes); instead, it counts "new" instances
of the help message and displays a message every ~5 seconds when
there are new ones ("I got X new copies of the help message...")
opal_show_help and opal_output still exist, but they only output in
the current process. The intent for the new orte_* functions is that
they can apply job-level intelligence to the output. As such, we
recommend that all new ORTE and OMPI code use the new orte_*
functions, not thei opal_* functions.
=== New code ===
For ORTE and OMPI programmers, here's what you need to do differently
in new code:
* Do not include opal/util/show_help.h or opal/util/output.h.
Instead, include orte/util/output.h (this one header file has
declarations for both the orte_output() series of functions and
orte_show_help()).
* Effectively s/opal_output/orte_output/gi throughout your code.
Note that orte_output_open() takes a slightly different argument
list (as a way to pass data to the filtering stream -- see below),
so you if explicitly call opal_output_open(), you'll need to
slightly adapt to the new signature of orte_output_open().
* Literally s/opal_show_help/orte_show_help/. The function signature
is identical.
=== Notes ===
* orte_output'ing to stream 0 will do similar to what
opal_output'ing did, so leaving a hard-coded "0" as the first
argument is safe.
* For systems that do not use ORTE's RML or the HNP, the effect of
orte_output_* and orte_show_help will be identical to their opal
counterparts (the additional information passed to
orte_output_open() will be lost!). Indeed, the orte_* functions
simply become trivial wrappers to their opal_* counterparts. Note
that we have not tested this; the code is simple but it is quite
possible that we mucked something up.
= Filter Framework =
Messages sent view the new orte_* functions described above and
messages output via the IOF on the HNP will now optionally be passed
through a new "filter" framework before being output to
stdout/stderr. The "filter" OPAL MCA framework is intended to allow
preprocessing to messages before they are sent to their final
destinations. The first component that was written in the filter
framework was to create an XML stream, segregating all the messages
into different XML tags, etc. This will allow 3rd party tools to read
the stdout/stderr from the HNP and be able to know exactly what each
text message is (e.g., a help message, another OMPI infrastructure
message, stdout from the user process, stderr from the user process,
etc.).
Filtering is not active by default. Filter components must be
specifically requested, such as:
{{{
$ mpirun --mca filter xml ...
}}}
There can only be one filter component active.
= New MCA Parameters =
The new functionality described above introduces two new MCA
parameters:
* '''orte_base_help_aggregate''': Defaults to 1 (true), meaning that
help messages will be aggregated, as described above. If set to 0,
all help messages will be displayed, even if they are duplicates
(i.e., the original behavior).
* '''orte_base_show_output_recursions''': An MCA parameter to help
debug one of the known issues, described below. It is likely that
this MCA parameter will disappear before v1.3 final.
= Known Issues =
* The XML filter component is not complete. The current output from
this component is preliminary and not real XML. A bit more work
needs to be done to configure.m4 search for an appropriate XML
library/link it in/use it at run time.
* There are possible recursion loops in the orte_output() and
orte_show_help() functions -- e.g., if RML send calls orte_output()
or orte_show_help(). We have some ideas how to fix these, but
figured that it was ok to commit before feature freeze with known
issues. The code currently contains sub-optimal workarounds so
that this will not be a problem, but it would be good to actually
solve the problem rather than have hackish workarounds before v1.3 final.
This commit was SVN r18434.
Also, update some properties (source files should not be executeable...), and remove a couple unneeded inclusions of orte_proc_table.h
This commit was SVN r17655.
about linkers, have all OPAL, ORTE, and OMPI components '''not'' link
against the OPAL, ORTE, or OMPI libraries.
See ttp://www.open-mpi.org/community/lists/users/2007/10/4220.php for
details (or https://svn.open-mpi.org/trac/ompi/wiki/Linkers for a
better-formatted version of the same info).
This commit was SVN r16968.
A subset of this patch needs to be applied to v1.2
Refs trac:928
This commit was SVN r15918.
The following Trac tickets were found above:
Ticket 928 --> https://svn.open-mpi.org/trac/ompi/ticket/928
from orte_ns.compare_fields(), not 0 (yes, they're the same [today],
but it is much better to check for symbolic names...).
This commit was SVN r15731.
to light: we weren't ack'ing properly for streams that originated (or
originated via proxy) and terminated within the HNP. This commit
fixes that.
It also fixes a few style issues, and added some more opal_outputs for
debugging. Also, fixed a bug where the fact that we forwarded (and
therefore might need to update the ack) was not correctly reported if
there were multiple forwards (which there are not as the system is
currently using IOF, but there could be).
Refs trac:1098 -- want to get another pair of eyes to look at this before
I close the ticket.
This commit was SVN r15730.
The following Trac tickets were found above:
Ticket 1098 --> https://svn.open-mpi.org/trac/ompi/ticket/1098
* General TCP cleanup for OPAL / ORTE
* Simplifying the OOB by moving much of the logic into the RML
* Allowing the OOB RML component to do routing of messages
* Adding a component framework for handling routing tables
* Moving the xcast functionality from the OOB base to its own framework
Includes merge from tmp/bwb-oob-rml-merge revisions:
r15506, r15507, r15508, r15510, r15511, r15512, r15513
This commit was SVN r15528.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r15506
r15507
r15508
r15510
r15511
r15512
r15513
Cleanup ALL instances of output involving the printing of orte_process_name_t structures using the ORTE_NAME_ARGS macro so that the number of fields and type of data match. Replace those values with a new macro/function pair ORTE_NAME_PRINT that outputs a string (using the new thread safe data capability) so that any future changes to the printing of those structures can be accomplished with a change to a single point.
Note that I could not possibly find outputs that directly print the orte_process_name_t fields, but only dealt with those that used ORTE_NAME_ARGS. Hence, you may still have a few outputs that bark during compilation. Also, I could only verify those that fall within environments I can compile on, so other environments may yield some minor warnings.
This commit was SVN r15517.
build it's possible that we have to process an ack before this function
returns. If we don't release the lock here we cause a deadlock later
in ack processing function.
This commit was SVN r15441.
Fix the blasted iof null component so it only is selected if/when directed.
This commit was SVN r15437.
The following SVN revision numbers were found above:
r15390 --> open-mpi/ompi@bd65f8ba88
Short description: major changes include -
1. singletons now fork/exec a local daemon to manage their operations.
2. the orte daemon code now resides in libopen-rte
3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided.
I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine.
This commit was SVN r15390.
