The (effective) "+42" computation was, in fact, the incorrect answer
in this case (gasp!).
We should just take the max_msg_size from the command (which came from
the libfabric endpoint max_msg_size attribute in the client) and
subtract off the max header size: 68 (which is explained in the
comment). This will result in a "large" message size which is likely
slightly smaller than the MTU, but still right up near the MTU, and
therefore good enough.
Note: the old computation (i.e., -(68-42)) worked fine when we asked
for Libfabric API v1.1 because the usnic provider would return a
max_msg_size that was already less than the MTU due to FI_PREFIX
behavior shenanigans. Once we started asking for Libfabric API v1.4,
the usnic Libfabric provider started returning (MTU + prefix_size),
and the -(68-42) computation started giving a value that was over the
MTU. This caused sendto() on the connectivity checker UDP socket
to fail.
This commit also removes an old/misleading comment.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
* Add a configure time option to rename libmpi(_FOO).*
- `--with-libmpi-name=STRING`
* This commit only impacts the installed libraries.
Internal, temporary libraries have not been renamed to limit the
scope of the patch to only what is needed.
For example:
```shell
shell$ ./configure --with-libmpi-name=wookie
...
shell$ find . -name "libmpi*"
shell$ find . -name "libwookie*"
./lib/libwookie.so.0.0.0
./lib/libwookie.so.0
./lib/libwookie.so
./lib/libwookie.la
./lib/libwookie_mpifh.so.0.0.0
./lib/libwookie_mpifh.so.0
./lib/libwookie_mpifh.so
./lib/libwookie_mpifh.la
./lib/libwookie_usempi.so.0.0.0
./lib/libwookie_usempi.so.0
./lib/libwookie_usempi.so
./lib/libwookie_usempi.la
shell$
```
theses three pmix components use the same class name,
declare it as static so Open MPI can be built with --disable-dlopen
Thanks Limin Gu for the report
The rdmacm CPC in the openib BTL is not thread safe. The rdmacm CPC
should disqualify itself (instead of failing in random ways) if
MPI_THREAD_MULTIPLE is the thread level.
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
This patch is based on the "RFC: Reenabling the TCP BTL over local
interfaces (when specifically requested)". It removes the hardcoded
exception for the local devices that has been enforced by the
TCP BTL. Instead, we exclude the local interface only via the
exclude MCA (both IPv4 and IPv6 local addresses are already in the
default if_exclude), which is also the behavior currently described in
our README file.
pmix_progress_thread_finalize() invokes libevent event_base_free,
so all libevent stuff cannot be used after.
Hence, pmix_client_globals.myserver must be PMIX_DESTRUCT'ed
before invoking pmix_progress_thread_finalize()
pmix1_value_unload() was added a "key" argument which is unused,
and pmix1_value_unload() was sometimes invoked with two arguments instead of three.
since the "key" argument is unused, simply remove it from the
subroutine prototype and calls.
the LT_* macros do overwrite the enable_dlopen variable,
so it must be tested and saved before invoking LT_INIT.
delay the invokation of the LT_* macros and use the
PMIX_ENABLE_DLOPEN_SUPPORT variable to figure out whether
--disable-dlopen was invoked
This commit fixes an abort during finalize because pending events were
removed from the list twice.
References #2030
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
We commonly see messages on the users list where a peer has hung up
because it has crashed. Instead of having just a BTL_ERROR message,
make this a real opal_show_help() message that tells the user that the
peer unexpectedly hung up, and they should look into *why* that peer
hung up.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
It looks like one help message was accidentally pasted in the middle
of another. Disentangle the two messages from each other, and
slightly tweak the one message to say that the job may also crash (in
addition to hanging).
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
This commit prevents the connection code from trying to connect an
endpoint if the directed datagram has been posted but not received.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
The xlc compiler seems to behave in a different way that gcc when it
comes the inline asm. There were two problems with the code with xlc:
- The TOC read in mca_patcher_base_patch_hook used the syntax
register unsigned long toc asm("r2") to read $r2 (the TOC
pointer). With gcc this seems to behave as expected but with xlc
the result in toc is not the same as $r2. I updated the code to use
asm volatile ("std 2, %0" : "=m" (toc)) to load the TOC pointer.
- The OPAL_PATCHER_BEGIN macro is meant to be the first thing in a
hook. On PPC64 it loads the correct TOC pointer (thanks to
mca_patcher_base_patch_hook) and saves the old one. The
OPAL_PATCHER_END macro restores the TOC pointer. Because we *need*
the TOC to be correct before it is accessed in the hook the
OPAL_PATCHER_BEGIN macro MUST come first. We did this and all was
well with gcc. With xlc on the other hand there was a TOC access
before the assembly inserted by OPAL_PATCHER_BEGIN. To fix this
quickly I broke each hook into a pair of function with the
OPAL_PATCHER_* macros on the top level functions. This works around
the issue but is not a clean way to fix this. In the future we
should 1) either update overwrite to not need this, or 2) figure
out why xlc is not inserting the asm before the first TOC read.
This fixesopen-mpi/ompi#1854
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
With libfabric v1.4, the usnic provider changed the values of its
fabric and domain name strings (compared to libfabric <v1.4). Update
the Open MPI usNIC BTL to handle both pre-v1.4 and v1.4 fabric/domain
names.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
and fail with a user friendly message if no method is available:
"sec: native cannot validate_cred on this system"
(back-ported from upstream pmix/master@c474a1fc60)
This commit fixes a race that can occur when two threads are in the
ugni progress function at the same time. This race occurs when one
thread calls GNI_PostDataProbeById then goes to sleep then another
thread calls GNI_PostDataProbeById then GNI_EpPostDataWaitById before
the other thread wakes up. If this happens the first thread will print
a warning on GNI_EpPostDataWaitById about no matching post.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit fixes two issues that can occur during a connection:
- Re-entry to connection progress from modex lookup. Added an
additional endpoint state that will keep the code from re-entering
the common endpoint create.
- Fixed a race between a process posting a directed datagram through
a send and a connection being progressed through opal_progress().
The progress code was not obtaining the endpoint lock before
attempting to update the endpoint. To limit the amount of code
changed for 2.0.1 this commit makes the endpoint lock recursive. In
a future update this may be changed.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Fixes PR https://github.com/open-mpi/ompi/pull/1687
The code that sets OPAL_HAVE_WORKING_EVENTOPS for internal libevent
was executed even if the external libevent component was configured.
As the result libevent progress wasn't called in opal_progress which
for example caused ring_c to hang when pml/ob1 was used.
Architecture is set by the ompi layer *after* job startup, so the key cannot
have the "pmix" prefix since optimizations in open-mpi/ompi@01a653d50a
otherwise architecture cannot be retrieved
This commits changed rand(3) and family in libevent to use internal
random function provided in opal to prevent pertubing user's random seed.
Fixesopen-mpi/ompi#1877
On Cray, PR #1846 introduced a double free
situation which led to all kinds of random memory
corruption problems.
This commit fixes this problem.
Signed-off-by: Howard Pritchard <howardp@lanl.gov>
The max inline send size on a queue pair is not available until after
the endpoint is connected. Before this commit the send flags
(including the inline flag) were set before this value was
initialized. This commit moves setting the send_flags down to
mca_btl_openib_put_internal which is only called after the endpoint is
connected. This fixes a bug when using osc/rdma.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit fixes a bug in the pmix2x client code where a loop
variable is not correctly incremented. This was leading to hangs and
crashes when creating intercommunicators. Also fixed two double
increments in other loops.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Blocking fence is used in yalla del proc. Native pmix exposes this functionality.
We need to expose it for SLURM's s1/s2 components as well.
Also this commit fixes uninitialized `rc` in fencenb's of both
components.
Thanks Jeff for the guidance
Fixesopen-mpi/ompi#1683
note:
in order to keep this commit easy to review, some AS_IF([...]) were replaced with
AS_IF([false], ...) or AS_IF_([true], ...)
these will be removed and re-idented in a subsequent commit
pmix cannot be built on alpine linux because of some missing includes.
uid_t and gid_t are defined in unistd.h or sys/types.h, and unistd.h
is not indirectly pulled under alpine linux, so do it manually.
Thanks N.L.K Nguyen for the report
(back-ported from upstream pmix/master@c8d55350a9)
This commit fixes a long standing bug in rdmacm. It is required that
the thread that calls mca_btl_openib_endpoint_cpc_complete holds the
endpoint lock. This was not the case for rdmacm. This causes debug
builds to abort. This change also required changing
mca_btl_openib_endpoint_send_cts to require the endpoint lock to be
held when calling.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit is an attempt to fix a hang in finalize of rdmacm. This fixes
a path where no rdmacm client is found for an endpoint.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit fixes a segmentation fault that occurs if a device can be
initialized but not used. In this case the devices_count is not equal
to the number of usable devices in the devices pointer array.
Thanks to @artpol84 for tracking this down.
Fixesopen-mpi/ompi#1823
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
The way the gni btl is currently coded,
it will run completely out of gas on KNL at
123 processes/node. Since there are bound to be
those who try to run a MPI process/hyperthread
on KNL nodes, the fma sharing mode needs to be requested.
Signed-off-by: Howard Pritchard <howardp@lanl.gov>
Add PMIx 2.0
Remove PMIx 1.1.4
Cleanup copying of component
Add missing file
Touchup a typo in the Makefile.am
Update the pmix ext114 component
Minor cleanups and resync to master
Update to latest PMIx 2.x
Update to the PMIx event notification branch latest changes
The rdma_disconnect function specifies that both the server and client
should call rdma_disconnect. The code was not calling rdma_disconnect
on an endpoint if the event came before the endpoint finalization.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Before dynamic add_procs the openib_btl_size_queues was called exactly
once for non-dynamic jobs. Now the function is called on each new
connection so the calculation was wrong. Re-wrote the function to
correctly calculate the CQ size and only attempt to adjust the CQ if
the requested size has changed. This fixes a bug when using the openib
btl on psm2 hardware that is caused by the time needed to resize a
CQ. The overhead was causing udcm to timeout and fail.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This fixes https://github.com/open-mpi/ompi/issues/1732: i.e., the
case where the outer project has its own check for
<valgrind/valgrind.h>, but also supplements CPPFLAGS (to find
Valgrind's header files) before doing that check.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Ideally, we would tell OMPI to disable autoconf's caching of our
valgrind check result so that its check gets the right result after
adding CPPFLAGS. Not sure if we can do that.
For now, just disable our Valgrind code in embedded mode.
This will keep the x86 backend enabled under Valgrind but
it will auto-disable itself when finding identical APIC ids anyway
(because CPUID returns same outputs for all PUs).
Signed-off-by: Brice Goglin <Brice.Goglin@inria.fr>
Fixesopen-mpi/ompi#1732
(cherry picked from commit open-mpi/hwloc@8b44fb1c81)
This commit fixes a programming error when using an aries nic. The
documentation of ugni shows that only the local alignment restriction
for get was lifted on aries. There is still a remote address alignment
restriction.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit fixes a programming error when using an aries nic. The
documentation of ugni shows that only the local alignment restriction
for get was lifted on aries. There is still a remote address alignment
restriction.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit adds support for Cray Aries atomic operations. This
includes 32-bit and floating point support.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit add support for more atomic operations and type. The
operations added are logical and, logical or, logical xor, swap, min,
and max. New types are 32-bit int by using the
MCA_BTL_ATOMIC_FLAG_32BIT flag, 64-bit float by using the
MCA_BTL_ATOMIC_FLAG_FLOAT flag, and 32-bit float by using both
flags. Floating point numbers are supported by packing the number in
as an int64_t or int32_t. We will update the btl interface in the
future to make this less confusing.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Before dynamic add_procs support was committed to master we called
add_procs with every proc in the job. The XRC code in the openib btl
was taking advantage of this and setting the number of work queue
entries (WQE) based on all the procs on a remote node. Since that is
no longer the case we can not simply increment the sd_wqe field on the
queue pair. To fix the issue a new field has been added to the xrc
queue pair structure to keep track of how many wqes there are total on
the queue pair. If a new endpoint is added that increases the number
of wqes and the xrc queue pair is already connected the code will
attempt to modify the number of wqes on the queue pair. A failure is
ignored because all that will happen is the number of active send work
requests on an XRC queue pair will be more limited.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
The original VADER_MAX_ADDRESS was tunned for x86_64 platforms only.
For non x86_64 platforms we can use XPMEM_MAXADDR_SIZE.
Signed-off-by: Pavel Shamis (Pasha) <pasharesearch@gmail.com>
This commit reduces the overhead of calling the ugni progress
function. It does the following:
- Check for new connections once every eight calls.
- Do not call remote smsg progress unless we are connected to at
least one remote peer.
- Do not call rdma progress unless at least one rdma fragment is
outstanding.
- Check endpoint wait list size before obtaining a lock.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit reduces the default exclusivity so that btl/scif is not
used for send/recv over other shared memory transports.
Fixesopen-mpi/ompi#1712
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Our checks and the ones of libevent are somewhat flawed.
If adding multiple "-framework" to CXXFLAGS or CFLAGS, we strip
the keyword from the command-line, not good.
libevent however assumes plain gcc without testing properly
that the compiler supports -Wno-deprecated-declarations.
The OPAL_CMA_NEED_SYSCALL_DEFS is always defined/set to 0 or 1. Therefore
instead of checking if the macro is defined, we have to look at the value
itself.
Signed-off-by: Pavel Shamis (Pasha) <pasharesearch@gmail.com>
Take another shot at untangling the spaghetti
orterun: fix for command line parsing
orte-submit calls opal_init_util () before parsing out MCA command line
options (-mca, -am, etc). This prevents mpirun from setting opal MCA
variables for some frameworks as well as the MCA base. This is because
when a framework is opened all of its variables are set to read-only.
Eventually we want to lift this restriction on some MCA variables but
since -mca is affected we must parse out the MCA command line options
before opal_init_util(). This commit fixes the bug by adding a new
option to opal_cmd_line_parse (ignore unknown option) so orte-submit
can pre-parse the command line for MCA options.
Signed-off-by: Nathan Hjelm <hjelmn@me.com>
Minor cleanups to avoid releasing/recreating the cmd line
Remove contrib/windows/
Merge hwlocXYZ/hwloc/README-ompi.txt back into hwlocXYZ/README-ompi.txt instead of having both.
Add README.txt in new automake-required directory contrib/systemd/
Keep the following patches applied since they are not in 1.11.3
linux: actually enable libudev based on the result of AC_CHECK_LIB
(cherry picked from open-mpi/hwloc@9549fd59af)
configure: check the actual may_alias syntax that we use
(cherry picked from open-mpi/hwloc@0ab7af5e90)
This commit fixes several bugs in the registration cache code:
- Fix a programming error in the grdma invalidation function that can
cause an infinite loop if more than 100 registrations are
associated with a munmapped region. This happens because the
mca_rcache_base_vma_find_all function returns the same 100
registrations on each call. This has been fixed by adding an
iterate function to the vma tree interface.
- Always obtain the vma lock when needed. This is required because
there may be other threads in the system even if
opal_using_threads() is false. Additionally, since it is safe to do
so (the vma lock is recursive) the vma interface has been made
thread safe.
- Avoid calling free() while holding a lock. This avoids race
conditions with locks held outside the Open MPI code.
Fixesopen-mpi/ompi#1654.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Update external as well
Revise the change: we still need the MPI_Barrier in MPI_Finalize when we use a blocking fence, but do use the "lazy" wait for completion. Replace the direct logic in MPI_Init with a cleaner macro
WRAPPER_EXTRA flags are checked *before* the POST_CONFIG macro is
invoked. So set them in the main CONFIG macro.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
xlc 13.1.0 crashes because of our may_alias attributes in nolibxml.c
on Power7. libxml.c and nolibxml.c are the only may_alias users for now,
so change our configure check to match the actual code using it.
Thanks to Paul Hargrove for reporting and debugging the issue,
and providing the patch.
https://www.open-mpi.org/community/lists/devel/2016/05/18918.php
(cherry picked from open-mpi/hwloc@0ab7af5e90)
Per discussion on the mailing list and with IBM, remove the AIX timer
code (since AIX is no longer supported).
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
This commit disables the linux patcher component due to a limitation
in loader patching. While this component is effective in patching
calls made within Open MPI and by the application it fails to hook
calls made within glibc. This means the munmap call made by free is
not correctly hooked. Until this problem can be resolved this
component will remain disabled. If it can't be resolved this component
should probably be removed.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
The table of contents (TOC) code only appears to only apply to
ppc64. The code was incorrectly assuming the existence of the TOC on
ppc32. This commit updates the necessary code to only apply to ppc64.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit fixes a compile/link issue caused by vader. The vader btl
was using OPAL_THREAD_ADD64 to increment a counter which may not be
available on 32-bit systems. Changed to use OPAL_THREAD_ADD_SIZE_T
which will be 64-bit or 32-bit depending on the system.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
ebx can not be clobbered when using -fPIC so save and restore the
register instead of allowing it to be clobbered.
Signed-off-by: Nathan Hjelm <hjelmn@me.com>
instead of doing AC_CHECK_HEADERS+AC_CHECK_LIB and only using the result of the former.
Thanks to Paul Hargrove for reporting the issue (OMPI build with -m32).
(cherry picked from open-mpi/hwloc@9549fd59af)
This commit fixes a compilation issue with some versions of exp
verbs. In some cases struct ibv_exp_device_attr does not have either
the exp_atom or exp_atomic_cap fields. It is fine to drop one check
and fall back to the non-exp attribute check on the other.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Add a feature check for clflush before trying to use the clflush
instruction. As far as I can tell there is no equivalent before the
SSE2 instruction set.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
The function signature of mremap on BSD (NetBSD, FreeBSD) differs from
the linux version. Added support for the BSD style of mremap.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit fixes a compile error when the system has mremap but not
MREMAP_FIXED. In this case we do not care about the value of
new_address as the argument does not exist.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
In some rare cases when a process receives the connect ack while
locally updating the peer endpoint structure, we could drop the
incomming connect ack due to the fact that the send handler is
protected with a try lock (on the endpoint) and our initial send
event was not persistent. Making the send event persistent solves
all issues.
