introduce separate convertors for memory vs. file representation. Adjust the interfaces for decode_datatype to provide the convertor to be used for that.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
two minor updates:
- in all components: use the fh->f_bytes_per_agg value
(which might have been set by an info object) instead
of re-reading the mca parameter
- vulcan and dynamic_gen2: replace one allgather operation
by an allreduce, since it is used to determine the sum
of an array.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
and some internal structure elements/components. Along the way,
add support for the cb_nodes Info object.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
ompio has the unique problem, that mca parameters set in the io/ompio component
have to be accessible from other frameworks as well. This is mostly done to avoid
a replication in the parameter names and to reduce the number of mca parameters that
and end-user has to worry about.
This commit introduces a generic function to retrieve ompio mca parameters, the function pointer
is stored on the file handle. It replaces two functions that used the same concept already for
one parameter each.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
* Resolves#3705
* Components should link against the project level library to better
support `dlopen` with `RTLD_LOCAL`.
* Extend the `mca_FRAMEWORK_COMPONENT_la_LIBADD` in the `Makefile.am`
with the appropriate project level library:
```
MCA components in ompi/
$(top_builddir)/ompi/lib@OMPI_LIBMPI_NAME@.la
MCA components in orte/
$(top_builddir)/orte/lib@ORTE_LIB_PREFIX@open-rte.la
MCA components in opal/
$(top_builddir)/opal/lib@OPAL_LIB_PREFIX@open-pal.la
MCA components in oshmem/
$(top_builddir)/oshmem/liboshmem.la"
```
Note: The changes in this commit were automated by the script in
the commit that proceeds it with the `libadd_mca_comp_update.py`
script. Some components were not included in this change because
they are statically built only.
Signed-off-by: Joshua Hursey <jhursey@us.ibm.com>
adjust the fcoll selection table to achieve the following:
- two_phase should not advertise itself on lustre file systems
- two_phase should advertise itself on sequential file systems (stripe_size == 0 )
- priority for dynamic, static and individual is reduced. This will lead to
two_phase being selected in scenarios where two or more components indicate
willingness to run.
Signed-off-by: Edgar Gabriel <gabriel@cs.uh.edu>
Passed the below set of symbols into a script that added ompi_ to them all.
Note that if processing a symbol named "foo" the script turns
foo into ompi_foo
but doesn't turn
foobar into ompi_foobar
But beyond that the script is blind to C syntax, so it hits strings and
comments etc as well as vars/functions.
coll_base_comm_get_reqs
comm_allgather_pml
comm_allreduce_pml
comm_bcast_pml
fcoll_base_coll_allgather_array
fcoll_base_coll_allgatherv_array
fcoll_base_coll_bcast_array
fcoll_base_coll_gather_array
fcoll_base_coll_gatherv_array
fcoll_base_coll_scatterv_array
fcoll_base_sort_iovec
mpit_big_lock
mpit_init_count
mpit_lock
mpit_unlock
netpatterns_base_err
netpatterns_base_verbose
netpatterns_cleanup_narray_knomial_tree
netpatterns_cleanup_recursive_doubling_tree_node
netpatterns_cleanup_recursive_knomial_allgather_tree_node
netpatterns_cleanup_recursive_knomial_tree_node
netpatterns_init
netpatterns_register_mca_params
netpatterns_setup_multinomial_tree
netpatterns_setup_narray_knomial_tree
netpatterns_setup_narray_tree
netpatterns_setup_narray_tree_contigous_ranks
netpatterns_setup_recursive_doubling_n_tree_node
netpatterns_setup_recursive_doubling_tree_node
netpatterns_setup_recursive_knomial_allgather_tree_node
netpatterns_setup_recursive_knomial_tree_node
pml_v_output_close
pml_v_output_open
intercept_extra_state_t
odls_base_default_wait_local_proc
_event_debug_mode_on
_evthread_cond_fns
_evthread_id_fn
_evthread_lock_debugging_enabled
_evthread_lock_fns
cmd_line_option_t
cmd_line_param_t
crs_base_self_checkpoint_fn
crs_base_self_continue_fn
crs_base_self_restart_fn
event_enable_debug_output
event_global_current_base_
event_module_include
eventops
sync_wait_mt
trigger_user_inc_callback
var_type_names
var_type_sizes
Signed-off-by: Mark Allen <markalle@us.ibm.com>
since Open MPI now requires a C99, and ptrdiff_t type is part of C99,
there is no more need for the abstract OPAL_PTRDIFF_TYPE type.
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
- move the sort_iovec operations to fcoll/base
- move set_view_internal to common/ompio
- move set_file_default to common/ompio
- remove io_ompio_sort, not used anymore.
the coll_array functions are truly only used by the fcoll modules, so move
them to fcoll/base. There is currently one exception to that rule (number of aggreagtors
logic), but that function will be moved in a long term also to fcoll/base.
Fixes CID 72320: Explicit NULL dereferenced
On error it is possible that the blocklen_per_process array is
NULL. Change the NULL check before the free to check for non-NULL on
the array not the array element. Also clean up allocation of this
array to use calloc instead of malloc + setting each element to NULL.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
After long debugging, I found last week the reason this optimization originally broke
some hdf5 tests. We now pass the hdf5 test suite with the optimization being actively used.
Specifically:
- reduce the number of realloc's and malloc's by moving
some arrays out of the cycle loop, if we know that there
size is not changing
- store the rank of the aggregator in a separate variable to avoid
continuous dereferencing
- change the wait_all logic in write_all to use a fix number of requests
(even if they are MPI_REQUEST_NULL)
- fix the timing to considere the two initial allgather and the one
allgatherv operation to be a part of it
- add more comments.
- make the internal structure follow the Open MPI naming convention
- provide a single flag/macro which controls the compilation/utilization of this
feature, to avoid that somebody using this has to modify every single
fcoll component. A configure option could be added later if desired.
This commit adds support for project_framework_component_* parameter
matching. This is the first step in allowing the same framework name
in multiple projects. This change also bumps the MCA component version
to 2.1.0.
All master frameworks have been updated to use the new component
versioning macro. An mca.h has been added to each project to add a
project specific versioning macro of the form
PROJECT_MCA_VERSION_2_1_0.
Signed-off-by: Nathan Hjelm <hjelmn@me.com>
This commit adds an owner file in each of the component directories
for each framework. This allows for a simple script to parse
the contents of the files and generate, among other things, tables
to be used on the project's wiki page. Currently there are two
"fields" in the file, an owner and a status. A tool to parse
the files and generate tables for the wiki page will be added
in a subsequent commit.
should not be stored on the file handle anyway, since it is not a property of
the file.
- protect a realloc for zero byte scenarios.
This commit was SVN r32678.
number of bytes written and read. Status contains now the actual number of
bytes written for individual operations. For collective operations, this is
unfortunately not possible.
This commit was SVN r32674.
pkg{data,lib,includedir}, use our own ompi{data,lib,includedir}, which is
always set to {datadir,libdir,includedir}/openmpi. This will keep us from
having help files in prefix/share/open-rte when building without Open MPI,
but in prefix/share/openmpi when building with Open MPI.
This commit was SVN r30140.
Features:
- Support for an override parameter file (openmpi-mca-param-override.conf).
Variable values in this file can not be overridden by any file or environment
value.
- Support for boolean, unsigned, and unsigned long long variables.
- Support for true/false values.
- Support for enumerations on integer variables.
- Support for MPIT scope, verbosity, and binding.
- Support for command line source.
- Support for setting variable source via the environment using
OMPI_MCA_SOURCE_<var name>=source (either command or file:filename)
- Cleaner API.
- Support for variable groups (equivalent to MPIT categories).
Notes:
- Variables must be created with a backing store (char **, int *, or bool *)
that must live at least as long as the variable.
- Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of
mca_base_var_set_value() to change the value.
- String values are duplicated when the variable is registered. It is up to
the caller to free the original value if necessary. The new value will be
freed by the mca_base_var system and must not be freed by the user.
- Variables with constant scope may not be settable.
- Variable groups (and all associated variables) are deregistered when the
component is closed or the component repository item is freed. This
prevents a segmentation fault from accessing a variable after its component
is unloaded.
- After some discussion we decided we should remove the automatic registration
of component priority variables. Few component actually made use of this
feature.
- The enumerator interface was updated to be general enough to handle
future uses of the interface.
- The code to generate ompi_info output has been moved into the MCA variable
system. See mca_base_var_dump().
opal: update core and components to mca_base_var system
orte: update core and components to mca_base_var system
ompi: update core and components to mca_base_var system
This commit also modifies the rmaps framework. The following variables were
moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode,
rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables.
This commit was SVN r28236.
