Many of these tests were failing due to opal_init() failing in some
cases (because the opal shmem framework needs installed components, so
"make distcheck" would fail these tests because the opal shmem
components were not installed). However, all of these tests seem to
be fine with opal_init_util() -- so let's re-enable these tests.
Now that "make check" siphons off stdout/stderr to logfiles, it's ok
to have output by default from tests. This test fails often enough
that it's useful to see the diagnostic output.
This commit adds a new class: opal_fifo.h. The new class has atomic, non-atomic,
and opal_using_threads() conditoned routines. It should be used when first-in
first-out is required and should perform much better than using locks and an
opal_list_t. Like with opal_lifo_t there are two versions of the atomic
implementation: 128-bit compare-and-swap, and spin-locked. More implementations
can be added later (LL/SC comes to mind).
This commit also adds a unit test for the opal_fifo_t class. This test verifies
the fifo implementation when using multiple threads.
- Rename opal_atomic_lifo_t to opal_lifo_t to reflect both atomic and
non-atomic usage. Added new routines (opal_lifo_*_st) for non-atomic
usage as well as routines conditioned off opal_using_threads(). The
atomic versions are always thread safe and the non-atomic are always
not thread safe.
- Add a new atomic lifo implementation that makes use of 128-bit
compare-and-swap. The new implementation should scale better with
larger numbers of threads.
- Add threading unit test for opal_lifo_t.
We recognize that this means other users of OPAL will need to "wrap" the opal_process_name_t if they desire to abstract it in some fashion. This is regrettable, and we are looking at possible alternatives that might mitigate that requirement. Meantime, however, we have to put the needs of the OMPI community first, and are taking this step to restore hetero and SPARC support.
the OPAL and ORTE libraries. This is required by projects such as ORCM
that have their own ORTE and OPAL libraries in order to avoid library
confusion. By renaming their version of the libraries, the OMPI
applications can correctly dynamically load the correct one for their
build."
This reverts commit 63f619f871.
1. It's actually hashing now, whereas the old OPAL hash table was not. Thus, it is a bug fix for and, as such, should be included in the 1.8 series.
2. It is dynamic and can grow and shrink the number of buckets in accordance with job size, whereas the old OPAL hash table had a fixed number of buckets which resulted in poor retrieval performance at large scale.
This scheme has been deployed in the field on very large H.P./Mellanox systems and has been demonstrated to significantly decrease job start-up time (~ 20% improvement) when launching applications directly with srun in SLURM environments. However, neither SLURM nor direct launch are prerequisites to take advantage of this change as any entity that utilizes OPAL hash table objects can benefit (at least partially) from this contribution.
Linux statfs(2) lies about the type of fuse filesystems (it reports
fuse.encfs as an NFS filesystem). So just skip fuse filesystems in
this test until/if we ever care to add some kind of workaround.
Refs trac:4767
cmr=v1.8.2:reviewer=rhc
This commit was SVN r32152.
The following Trac tickets were found above:
Ticket 4767 --> https://svn.open-mpi.org/trac/ompi/ticket/4767
* Resolve set-but-not-used issues
* Resolve incorrect const notation (I checked with George first to see
what const notation he actually wanted)
* Comment out unused code (didn't delete it because it's useful
debugging code)
* Resolve int<-->void* casting
* Resolved signed / unsigned comparisons
This commit was SVN r30225.
On Linux, if this test is run with no command line params, it will run
"mount" and analyze the output (same as it always has).
On all platforms, if you provide one or more command line options,
each command line option is given to opal_path_nfs() and the result is
sent to stdout.
This commit was SVN r30208.
value to signal that the operation of retrieving the element from the free list
failed. However in this case the returned pointer was set to NULL as well, so the
error code was redundant. Moreover, this was a continuous source of warnings when
the picky mode is on.
The attached parch remove the rc argument from the OMPI_FREE_LIST_GET and
OMPI_FREE_LIST_WAIT macros, and change to check if the item is NULL instead of
using the return code.
This commit was SVN r28722.
When building Open MPI with CMake, a VS solution will be generated automatically, this solution can be directly used.
For the installer, it's a bit tricky, need to do more in NSIS config codes, in order to make the solution file aware the installation directory of user.
This commit was SVN r26616.
Roll in the ORTE state machine. Remove last traces of opal_sos. Remove UTK epoch code.
Please see the various emails about the state machine change for details. I'll send something out later with more info on the new arch.
This commit was SVN r26242.
zeroes);
if so, use it for bit-operations like opal_cube_dim and opal_hibit.
Implement two versions of power-of-two.
In case of opal_next_poweroftwo, this reduces the average execution
time from 83 cycles to 4 cycles (Intel Nehalem, icc, -O2, inlining,
measured rdtsc, with loop over 2^27 values).
Numbers for other functions are similar (but of course heavily depend
on the usage, e.g. opal_hibit() with a start of 4 does not save
much). The bsr instruction on AMD Opteron is also not as fast.
- Replace various places where the next power-of-two is computed.
Tested on Intel Nehalem Cluster with openib, compilers GNU-4.6.1 and
Intel-12.0.4 using mpi_testsuite -t "Collective" with 128 processes.
This commit was SVN r25270.
To enable the epochs and the resilient orte code, use the configure flag:
--enable-resilient-orte
This will define both:
ORTE_ENABLE_EPOCH
ORTE_RESIL_ORTE
This commit was SVN r25093.
No need for any CMRs to 1.5... that was already done in CMR 2728.
This commit was SVN r24545.
The following SVN revision numbers were found above:
r22841 --> open-mpi/ompi@b400b84162
There was no compelling reason to support such old kernels. Accordingly, convert the test to print a nice error message indicating we no longer support old kernels (but indicate that earlier OMPI versions do) and error out. Remove all code that was protected by "if have different pids" since it can no longer be compiled.
This commit was SVN r24531.
Setup the event API to support multiple bases in preparation for splitting the OMPI and ORTE events. Holding here pending shared memory resolution.
This commit was SVN r23943.
This is a fairly intrusive change, but outside of the moving of opal/event to opal/mca/event, the only changes involved (a) changing all calls to opal_event functions to reflect the new framework instead, and (b) ensuring that all opal_event_t objects are properly constructed since they are now true opal_objects.
Note: Shiqing has just returned from vacation and has not yet had a chance to complete the Windows integration. Thus, this commit almost certainly breaks Windows support on the trunk. However, I want this to have a chance to soak for as long as possible before I become less available a week from today (going to be at a class for 5 days, and thus will only be sparingly available) so we can find and fix any problems.
Biggest change is moving the libevent code from opal/event to a new opal/mca/event framework. This was done to make it much easier to update libevent in the future. New versions can be inserted as a new component and tested in parallel with the current version until validated, then we can remove the earlier version if we so choose. This is a statically built framework ala installdirs, so only one component will build at a time. There is no selection logic - the sole compiled component simply loads its function pointers into the opal_event struct.
I have gone thru the code base and converted all the libevent calls I could find. However, I cannot compile nor test every environment. It is therefore quite likely that errors remain in the system. Please keep an eye open for two things:
1. compile-time errors: these will be obvious as calls to the old functions (e.g., opal_evtimer_new) must be replaced by the new framework APIs (e.g., opal_event.evtimer_new)
2. run-time errors: these will likely show up as segfaults due to missing constructors on opal_event_t objects. It appears that it became a typical practice for people to "init" an opal_event_t by simply using memset to zero it out. This will no longer work - you must either OBJ_NEW or OBJ_CONSTRUCT an opal_event_t. I tried to catch these cases, but may have missed some. Believe me, you'll know when you hit it.
There is also the issue of the new libevent "no recursion" behavior. As I described on a recent email, we will have to discuss this and figure out what, if anything, we need to do.
This commit was SVN r23925.
check" (it's been deactivated for 2+ years now, anyway). It needs to
be launched via "mpirun" and needs >= 2 processes, so it wasn't a good
candidate for "make check", anyway.
The test itself has moved to OMPI's internal testing suites.
This commit was SVN r23526.
tests, not OMPI tests.
This allows us to "make distcheck" with "./autogen.sh -no-ompi"
trees (i.e., these tests will now still work even if the OMPI layer is
not present -- because they're OPAL tests and we should treat them
that way).
This commit was SVN r23524.
test, not an OMPI test.
Also fix a case where if you haven't run "make install", then
opal_show_help_string() will (rightfully) return NULL. So be sure to
handle that case and not segv.
This commit was SVN r23522.
longer necessary to link in libopen-rte if you link in libmpi (for
example) because of the fact that libmpi now completely slurps in
libopen-rte (ditto with libopen-rte and libopen-pal).
* Only build ompi_rb_tree if we have the OMPI layer.
This commit was SVN r23521.
#define CACHE_LINE_SIZE to 128. This name has a conflict on NetBSD,
and it seems kinda odd to have a header file that ''only'' defines a
single value. Also, we'll soon be raising hwloc to be a first-class
item, so having this file around seemed kinda weird.
Therefore, I replaced CACHE_LINE_SIZE with opal_cache_line_size, an
int (in opal/runtime/opal_init.c and opal/runtime/opal.h) on the
rationale that we can fill this in at runtime with hwloc info (trunk
and v1.5/beyond, only). The only place we ''needed'' a compile-time
CACHE_LINE_SIZE was in the BTL SM (for struct padding), so I made a
new BTL_SM_ preprocessor macro with the old CACHE_LINE_SIZE value
(128). That use isn't suitable for run-time hwloc information,
anyway.
This commit was SVN r23349.
(OMPI_ERR_* = OPAL_SOS_GET_ERR_CODE(ret)), since the return value could be a
SOS-encoded error. The OPAL_SOS_GET_ERR_CODE() takes in a SOS error and returns
back the native error code.
* Since OPAL_SUCCESS is preserved by SOS, also change all calls of the form
(OPAL_ERROR == ret) to (OPAL_SUCCESS != ret). We thus avoid having to
decode 'ret' to get the native error code.
This commit was SVN r23162.
The OPAL SOS framework tries to meet the following objectives:
* reduce the cascading error messages and the amount of code needed to print an error message.
* build and aggregate stacks of encountered errors and associate related individual errors with each other.
* allow registration of custom callbacks to intercept error events.
For more information, refer to
https://svn.open-mpi.org/trac/ompi/wiki/ErrorMessages
This commit was SVN r23158.
tests ;-)) Turn them off again, didn't have time to look into them
Also, the test-program on eddie.osl.iu.edu, detects the rpc_pipefs
mounted on /var/lib/nfs/rpc_pipefs, required for NFS.
This commit was SVN r22607.
If file does not exist, check the directory it lives in...
Maybe used by caller, trying to open mmap() on NFS, Lustre or
Panasas (thanks Sam).
For now, this is used to warn about the usage of mmap on such FS.
Please note, that Ralph mentioned the orte_no_session_dir parameter.
The help message includes a reference to this.
Tested on NFS and Lustre on Linux on
smoky: mpirun --mca orte_tmpdir_base $HOME/tmp -np 2 ./mpi_stub
jaguar: mpirun ... --mca orte_tmpdir_base /tmp/work/$USER ...
Fixes trac:1354
This should cmr:v1.5 once it has soaked and is shown to work on
Solaris
This commit was SVN r22604.
The following Trac tickets were found above:
Ticket 1354 --> https://svn.open-mpi.org/trac/ompi/ticket/1354
In CMake 2.6 and earlier, this function add dependencies for targets and also link the target libraries automatically, but in CMake 2.8,this behavior has been changed, i.e. it will only add the dependencies but no link, which will cause linking errors at compilation time.
This commit was SVN r22405.
