Replace our old, clunky timing setup with a much nicer one that is only available if configured with --enable-timing. Add a tool for profiling clock differences between the nodes so you can get more precise timing measurements. I'll ask Artem to update the Github wiki with full instructions on how to use this setup.
This commit was SVN r32738.
WHAT: Merge the PMIx branch into the devel repo, creating a new
OPAL “lmix” framework to abstract PMI support for all RTEs.
Replace the ORTE daemon-level collectives with a new PMIx
server and update the ORTE grpcomm framework to support
server-to-server collectives
WHY: We’ve had problems dealing with variations in PMI implementations,
and need to extend the existing PMI definitions to meet exascale
requirements.
WHEN: Mon, Aug 25
WHERE: https://github.com/rhc54/ompi-svn-mirror.git
Several community members have been working on a refactoring of the current PMI support within OMPI. Although the APIs are common, Slurm and Cray implement a different range of capabilities, and package them differently. For example, Cray provides an integrated PMI-1/2 library, while Slurm separates the two and requires the user to specify the one to be used at runtime. In addition, several bugs in the Slurm implementations have caused problems requiring extra coding.
All this has led to a slew of #if’s in the PMI code and bugs when the corner-case logic for one implementation accidentally traps the other. Extending this support to other implementations would have increased this complexity to an unacceptable level.
Accordingly, we have:
* created a new OPAL “pmix” framework to abstract the PMI support, with separate components for Cray, Slurm PMI-1, and Slurm PMI-2 implementations.
* Replaced the current ORTE grpcomm daemon-based collective operation with an integrated PMIx server, and updated the grpcomm APIs to provide more flexible, multi-algorithm support for collective operations. At this time, only the xcast and allgather operations are supported.
* Replaced the current global collective id with a signature based on the names of the participating procs. The allows an unlimited number of collectives to be executed by any group of processes, subject to the requirement that only one collective can be active at a time for a unique combination of procs. Note that a proc can be involved in any number of simultaneous collectives - it is the specific combination of procs that is subject to the constraint
* removed the prior OMPI/OPAL modex code
* added new macros for executing modex send/recv to simplify use of the new APIs. The send macros allow the caller to specify whether or not the BTL supports async modex operations - if so, then the non-blocking “fence” operation is used, if the active PMIx component supports it. Otherwise, the default is a full blocking modex exchange as we currently perform.
* retained the current flag that directs us to use a blocking fence operation, but only to retrieve data upon demand
This commit was SVN r32570.
grpcomm: fix memory leaks
We were leaking the caddy object used to pass data to the callback
function. This commit fixes these leaks.
oob,rml: fix memory leaks
This commit fixes several leaks:
- Both the oob/base and oob/tcp were leaking objects on their peer
hash tables. Iterate on the hash tables and free any objects.
- Leaked sent messages because of missing OBJ_RELEASE. I placed the
release in ORTE_RML_SEND_COMPLETE to catch all the possible
paths.
ess/base: close the state framework
cmr=v1.8.2:reviewer=rhc
This commit was SVN r31776.
NOTE: launch performance will be absolutely awful if you do this with BTLs that aren't configured to modex_recv on first message!
Even with "modex on demand", we still have to do a barrier in place of the modex - we simply don't move any data around, which does reduce the time impact. The barrier is required to ensure that the other proc has in fact registered all its BTL info and therefore is prepared to hand over a complete data package. Otherwise, you may not get the info you need. In addition, the shared memory BTL can fail to properly rendezvous as it expects the barrier to be in place.
This behavior will *only* take effect under the following conditions:
1. launched via mpirun
2. #procs is greater than ompi_hostname_cutoff, which defaults to UINT32_MAX
3. mca param rte_orte_direct_modex is set to 1. At the moment, we are having problems getting this param to register properly, so only the first two conditions are in effect. Still, the bottom line is you have to *want* this behavior to get it.
The planned next evolution of this will be to make the direct modex be non-blocking - this will require two fixes:
1. if the remote proc doesn't have the required info, then let it delay its response until it does. This means we need a way for the MPI layer to tell the RTE "I am done entering modex data".
2. adjust the SM rendezvous logic to loop until the required file has been created
Creating a placeholder to bring this over to 1.7.5 when ready.
cmr=v1.7.5:reviewer=hjelmn:subject=Enable direct modex at scale
This commit was SVN r30259.
pkg{data,lib,includedir}, use our own ompi{data,lib,includedir}, which is
always set to {datadir,libdir,includedir}/openmpi. This will keep us from
having help files in prefix/share/open-rte when building without Open MPI,
but in prefix/share/openmpi when building with Open MPI.
This commit was SVN r30140.
This patch changes all send/send_buffer occurrences in the C/R code
to send_nb/send_buffer_nb.
The new code compiles but does not work.
Changes from V1:
* #ifdef out the code (so it is preserved for later re-design)
* marked the broken C/R code with ENABLE_FT_FIXED
Changes from V2:
* just replace the blocking calls with the non-blocking calls
* all #ifdef's introduced in V1 are gone
* send_* returns error code or ORTE_SUCCESS (not the number of bytes)
This commit was SVN r30036.
This patch changes all recv/recv_buffer occurrences in the C/R code
to recv_nb/recv_buffer_nb.
The old code is still there but disabled using ifdefs (ENABLE_FT_FIXED).
The new code compiles but does not work.
Changes from V1:
* #ifdef out the code (so it is preserved for later re-design)
* marked the broken C/R code with ENABLE_FT_FIXED
Changes from V2:
* only #ifdef out the code where the behaviour is changed
(used to be blocking; now non-blocking)
This commit was SVN r30035.
includes various fixes all over the C/R code which are
hard to group like the other patches.
Changes from V1:
* explain why mca_base_component_distill_checkpoint_ready no longer works
* compare return result of opal functions with OPAL_* values
Changes from V2:
* use orte_rml_oob_ft_event() instead of referencing through the modules
* properly protect variable (thanks to --enable-picky)
This commit was SVN r29922.
error: void value not ignored as it ought to be
in the C/R code by ignoring the return value of functions which
no longer return a value (only void).
Signed-off-by: Adrian Reber <adrian.reber@hs-esslingen.de>
This commit was SVN r29816.
The intercomm "merge" function can create a linkage between procs that was not reflected anywhere in a modex, and so at least some of the procs in the resulting communicator don't know how to talk to some of the new communicator's peers.
For example, consider the case where:
1. parent job A comm_spawns a process (job B) - these processes exchange modex and can communicate
2. parent job A now comm_spawns another process (job C) - again, these can communicate, but the proc in C knows nothing of B
3. do an intercomm merge across the communicators created by the two comm_spawns. This puts B and C into the same communicator, but they know nothing about how to talk to each other as they were not involved in any exchange of contact info. Hence, collectives on that communicator now fail.
This fix adds an API to the ompi/dpm framework that (a) exchanges the modex info across the procs in the merge to ensure all procs know how to communicate, and (b) calls add_procs to give the btl's a chance to select transports to any new procs.
cmr:v1.7.3:reviewer=jsquyres
This commit was SVN r29166.
The following Trac tickets were found above:
Ticket 2904 --> https://svn.open-mpi.org/trac/ompi/ticket/2904
*** THIS RFC INCLUDES A MINOR CHANGE TO THE MPI-RTE INTERFACE ***
Note: during the course of this work, it was necessary to completely separate the MPI and RTE progress engines. There were multiple places in the MPI layer where ORTE_WAIT_FOR_COMPLETION was being used. A new OMPI_WAIT_FOR_COMPLETION macro was created (defined in ompi/mca/rte/rte.h) that simply cycles across opal_progress until the provided flag becomes false. Places where the MPI layer blocked waiting for RTE to complete an event have been modified to use this macro.
***************************************************************************************
I am reissuing this RFC because of the time that has passed since its original release. Since its initial release and review, I have debugged it further to ensure it fully supports tests like loop_spawn. It therefore seems ready for merge back to the trunk. Given its prior review, I have set the timeout for one week.
The code is in https://bitbucket.org/rhc/ompi-oob2
WHAT: Rewrite of ORTE OOB
WHY: Support asynchronous progress and a host of other features
WHEN: Wed, August 21
SYNOPSIS:
The current OOB has served us well, but a number of limitations have been identified over the years. Specifically:
* it is only progressed when called via opal_progress, which can lead to hangs or recursive calls into libevent (which is not supported by that code)
* we've had issues when multiple NICs are available as the code doesn't "shift" messages between transports - thus, all nodes had to be available via the same TCP interface.
* the OOB "unloads" incoming opal_buffer_t objects during the transmission, thus preventing use of OBJ_RETAIN in the code when repeatedly sending the same message to multiple recipients
* there is no failover mechanism across NICs - if the selected NIC (or its attached switch) fails, we are forced to abort
* only one transport (i.e., component) can be "active"
The revised OOB resolves these problems:
* async progress is used for all application processes, with the progress thread blocking in the event library
* each available TCP NIC is supported by its own TCP module. The ability to asynchronously progress each module independently is provided, but not enabled by default (a runtime MCA parameter turns it "on")
* multi-address TCP NICs (e.g., a NIC with both an IPv4 and IPv6 address, or with virtual interfaces) are supported - reachability is determined by comparing the contact info for a peer against all addresses within the range covered by the address/mask pairs for the NIC.
* a message that arrives on one TCP NIC is automatically shifted to whatever NIC that is connected to the next "hop" if that peer cannot be reached by the incoming NIC. If no TCP module will reach the peer, then the OOB attempts to send the message via all other available components - if none can reach the peer, then an "error" is reported back to the RML, which then calls the errmgr for instructions.
* opal_buffer_t now conforms to standard object rules re OBJ_RETAIN as we no longer "unload" the incoming object
* NIC failure is reported to the TCP component, which then tries to resend the message across any other available TCP NIC. If that doesn't work, then the message is given back to the OOB base to try using other components. If all that fails, then the error is reported to the RML, which reports to the errmgr for instructions
* obviously from the above, multiple OOB components (e.g., TCP and UD) can be active in parallel
* the matching code has been moved to the RML (and out of the OOB/TCP component) so it is independent of transport
* routing is done by the individual OOB modules (as opposed to the RML). Thus, both routed and non-routed transports can simultaneously be active
* all blocking send/recv APIs have been removed. Everything operates asynchronously.
KNOWN LIMITATIONS:
* although provision is made for component failover as described above, the code for doing so has not been fully implemented yet. At the moment, if all connections for a given peer fail, the errmgr is notified of a "lost connection", which by default results in termination of the job if it was a lifeline
* the IPv6 code is present and compiles, but is not complete. Since the current IPv6 support in the OOB doesn't work anyway, I don't consider this a blocker
* routing is performed at the individual module level, yet the active routed component is selected on a global basis. We probably should update that to reflect that different transports may need/choose to route in different ways
* obviously, not every error path has been tested nor necessarily covered
* determining abnormal termination is more challenging than in the old code as we now potentially have multiple ways of connecting to a process. Ideally, we would declare "connection failed" when *all* transports can no longer reach the process, but that requires some additional (possibly complex) code. For now, the code replicates the old behavior only somewhat modified - i.e., if a module sees its connection fail, it checks to see if it is a lifeline. If so, it notifies the errmgr that the lifeline is lost - otherwise, it notifies the errmgr that a non-lifeline connection was lost.
* reachability is determined solely on the basis of a shared subnet address/mask - more sophisticated algorithms (e.g., the one used in the tcp btl) are required to handle routing via gateways
* the RML needs to assign sequence numbers to each message on a per-peer basis. The receiving RML will then deliver messages in order, thus preventing out-of-order messaging in the case where messages travel across different transports or a message needs to be redirected/resent due to failure of a NIC
This commit was SVN r29058.
This creates a really bad scaling behavior. Users have found a nearly 20% launch time differential between mpirun and PMI, with PMI being the slower method. Some of the problem is attributable to poor exchange algorithms in RM's like Slurm and Alps, but we make things worse by calling "get" so many times.
Nathan (with a tad advice from me) has attempted to alleviate this problem by reducing the number of "get" calls. This required the following changes:
* upon first request for data, have the OPAL db pmi component fetch and decode *all* the info from a given remote proc. It turned out we weren't caching the info, so we would continually request it and only decode the piece we needed for the immediate request. We now decode all the info and push it into the db hash component for local storage - and then all subsequent retrievals are fulfilled locally
* reduced the amount of data by eliminating the exchange of the OMPI_ARCH value if heterogeneity is not enabled. This was used solely as a check so we would error out if the system wasn't actually homogeneous, which was fine when we thought there was no cost in doing the check. Unfortunately, at large scale and with direct launch, there is a non-zero cost of making this test. We are open to finding a compromise (perhaps turning the test off if requested?), if people feel strongly about performing the test
* reduced the amount of RTE data being automatically fetched, and fetched the rest only upon request. In particular, we no longer immediately fetch the hostname (which is only used for error reporting), but instead get it when needed. Likewise for the RML uri as that info is only required for some (not all) environments. In addition, we no longer fetch the locality unless required, relying instead on the PMI clique info to tell us who is on our local node (if additional info is required, the fetch is performed when a modex_recv is issued).
Again, all this only impacts direct launch - all the info is provided when launched via mpirun as there is no added cost to getting it
Barring objections, we may move this (plus any required other pieces) to the 1.7 branch once it soaks for an appropriate time.
This commit was SVN r29040.
Features:
- Support for an override parameter file (openmpi-mca-param-override.conf).
Variable values in this file can not be overridden by any file or environment
value.
- Support for boolean, unsigned, and unsigned long long variables.
- Support for true/false values.
- Support for enumerations on integer variables.
- Support for MPIT scope, verbosity, and binding.
- Support for command line source.
- Support for setting variable source via the environment using
OMPI_MCA_SOURCE_<var name>=source (either command or file:filename)
- Cleaner API.
- Support for variable groups (equivalent to MPIT categories).
Notes:
- Variables must be created with a backing store (char **, int *, or bool *)
that must live at least as long as the variable.
- Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of
mca_base_var_set_value() to change the value.
- String values are duplicated when the variable is registered. It is up to
the caller to free the original value if necessary. The new value will be
freed by the mca_base_var system and must not be freed by the user.
- Variables with constant scope may not be settable.
- Variable groups (and all associated variables) are deregistered when the
component is closed or the component repository item is freed. This
prevents a segmentation fault from accessing a variable after its component
is unloaded.
- After some discussion we decided we should remove the automatic registration
of component priority variables. Few component actually made use of this
feature.
- The enumerator interface was updated to be general enough to handle
future uses of the interface.
- The code to generate ompi_info output has been moved into the MCA variable
system. See mca_base_var_dump().
opal: update core and components to mca_base_var system
orte: update core and components to mca_base_var system
ompi: update core and components to mca_base_var system
This commit also modifies the rmaps framework. The following variables were
moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode,
rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables.
This commit was SVN r28236.
Reasoning: The old behavior was a little confusing. mca_base_components_open does not open an output stream so it is a little unexpected that mca_base_components_close does. To add to this several frameworks (that don't use mca_base_components_close) failed to close their output in the framework close function and others closed their output a second time. This change is an improvement to the symantics of mca_base_components_open/close as they are now symetric in their functionality.
This commit was SVN r27570.
Restore enable-static-ports option by default - the Cray will have to disable it to get around their library issues, but that's just a warning problem as opposed to blocking the build.
This commit was SVN r26606.
Roll in the ORTE state machine. Remove last traces of opal_sos. Remove UTK epoch code.
Please see the various emails about the state machine change for details. I'll send something out later with more info on the new arch.
This commit was SVN r26242.
Brian dealt with this in the past by creating platform files and using "no-build" to block the components. This was clunky, but acceptable when only one organization was using that option. However, that number has now expanded to at least two more locations.
Accordingly, make --without-rte-support actually work by adding appropriate configury to prevent components from building when they shouldn't. While doing so, remove two frameworks (db and rmcast) that are no longer used as ORCM comes to a close (besides, they belonged in ORCM now anyway). Do some minor cleanups along the way.
This commit was SVN r25497.
To enable the epochs and the resilient orte code, use the configure flag:
--enable-resilient-orte
This will define both:
ORTE_ENABLE_EPOCH
ORTE_RESIL_ORTE
This commit was SVN r25093.
