1
1
Граф коммитов

42 Коммитов

Автор SHA1 Сообщение Дата
Ralph Castain
248320b91a Enable connect_accept between multiple singleton jobs without the presence of an external rendezvous agent (e.g., ompi-server). This also enables connect_accept between processes in more than two jobs regardless of how they were started.
Create an ability to store the contact info for multiple HNPs being used to route between different job families. Modify the dpm orte module to pass the resulting store during the connect_accept procedure so that all jobs involved in the resulting communicator know how to route OOB messages between them.

Add a test provided by Philippe that tests this ability.

This commit was SVN r23438.
2010-07-20 04:22:45 +00:00
Ralph Castain
12cd07c9a9 Start reducing our dependency on the event library by removing at least one instance where we use it to redirect the program counter. Rolf reported occasional hangs of mpirun in very specific circumstances after all daemons were done. A review of MTT results indicates this may have been happening more generally in a small fraction of cases.
The problem was tracked to use of the grpcomm.onesided_barrier to control daemon/mpirun termination. This relied on messaging -and- required that the program counter jump from the errmgr back to grpcomm. On rare occasions, this jump did not occur, causing mpirun to hang.

This patch looks more invasive than it is - most of the affected files simply had one or two lines removed. The essence of the change is:

* pulled the job_complete and quit routines out of orterun and orted_main and put them in a common place

* modified the errmgr to directly call the new routines when termination is detected

* removed the grpcomm.onesided_barrier and its associated RML tag

* add a new "num_routes" API to the routed framework that reports back the number of dependent routes. When route_lost is called, the daemon's list of "children" is checked and adjusted if that route went to a "leaf" in the routing tree

* use connection termination between daemons to track rollup of the daemon tree. Daemons and HNP now terminate once num_routes returns zero

Also picked up in this commit is the addition of a new bool flag to the app_context struct, and increasing the job_control field from 8 to 16 bits. Both trivial.

This commit was SVN r23429.
2010-07-17 21:03:27 +00:00
Abhishek Kulkarni
afbe3e99c6 * Wrap all the direct error-code checks of the form (OMPI_ERR_* == ret) with
(OMPI_ERR_* = OPAL_SOS_GET_ERR_CODE(ret)), since the return value could be a
 SOS-encoded error. The OPAL_SOS_GET_ERR_CODE() takes in a SOS error and returns
 back the native error code.

* Since OPAL_SUCCESS is preserved by SOS, also change all calls of the form
  (OPAL_ERROR == ret) to (OPAL_SUCCESS != ret). We thus avoid having to
  decode 'ret' to get the native error code.

This commit was SVN r23162.
2010-05-17 23:08:56 +00:00
Ralph Castain
efbb5c9b7c Revamp the errmgr framework to provide a greater range of optional behaviors, including different behaviors for daemons, and remove several looping messages across the code base:
* add hnp and orted modules to the errmgr framework. The HNP module contains much of the code that was in the errmgr base since that code could only be executed by the HNP anyway.

* update the odls to report process states directly into the active errmgr module, thus removing the need to send messages looped back into the odls cmd processor. Let the active errmgr module decide what to do at various states.

* remove the code to track application state progress from the plm_base_launch_support.c code. Update the plm modules to call the errmgr directly when a launch fails.

* update the plm_base_receive.c code to call the errmgr with state updates from remote daemons

* update the routed modules to reflect that process state is updated in the errmgr

* ensure that the orted's open the errmgr and select their appropriate module

* add new pretty-print utilities to print process and job state. Move the pretty-print of time info to a globally-accessible place

* define a global orte_comm function to send messages from orted's to the HNP so that others can overlay the standard RML methods, if desired.

* update the orterun help output to reflect that the "term w/o sync" error message can result from three, not two, scenarios

This commit was SVN r23023.
2010-04-23 04:44:41 +00:00
Josh Hursey
e9b5162d79 Fix the configure logic for --with-ft so that it properly takes a comma separated list.
Many of the OPAL_ENABLE_FT should be OPAL_ENABLE_FT_CR, so fix those.

The OPAL Layer INC should call opal_output on restart so that it can refresh the string it prints to reflect the current pid/hostname which may have changed.

This commit was SVN r22824.
2010-03-12 23:57:50 +00:00
Shiqing Fan
872a4047ba Fix the bug that caused by ADD_DEPENDENCIES() from different version of CMake.
In CMake 2.6 and earlier, this function add dependencies for targets and also link the target libraries automatically, but in CMake 2.8,this behavior has been changed, i.e. it will only add the dependencies but no link, which will cause linking errors at compilation time.

This commit was SVN r22405.
2010-01-14 18:10:20 +00:00
Ralph Castain
8ab962411c Detect the scenario where one or more procs fail to call orte/ompi_init while others in the job do. This scenario can cause the job to hang as MPI_Init contains a barrier operation that will not complete. Although ORTE does not contain such a barrier, it still will be considered as an error scenario so that we can detect the MPI case - otherwise, ORTE has no knowledge of OMPI and wouldn't know how to differentiate the use-cases.
Take advantage of the changes to update the routed_base_receive code to avoid message overlap.

This commit was SVN r22329.
2009-12-17 19:39:53 +00:00
Shiqing Fan
bce2f44154 Update related .windows files with proper compiling properties, in order to have a successful DSO build.
This commit was SVN r21805.
2009-08-12 08:55:58 +00:00
Ralph Castain
f139cfd28a Fully enable the use of static ports to minimize connections on mpirun. When static ports are provided, daemons will automatically use routes defined by the selected routed module to callback to mpirun during startup, thus elimating the dedicated daemon-to-mpirun connection. Therefore, the total number of connections on mpirun will equal the fanout of the routed module (instead of #nodes in job).
Add a new tm ess module that exploits this capability.

Update the various plm modules to enable it - just a minor change reflecting an added param to a plm base function.

Additional fixes included:

1. remove an erroneous cleanup of session directories in the tool finalize procedure - tools don't create session directories to begin with!

2. fix a duplicate free when attempting to execute a non-existent app

3. cleanup an typo in the comm utilities 

4. fix comm_spawn - was perturbed by the changes in pack/unpack of orte_job_t to properly support orte-ps

Been tested on slurm and tm machines, using all tests in orte/test/mpi. May run into issue with command line length on large jobs due to inclusion of node info to support static ports - will fix this next with addition of regexp generator to compress that info.

This commit was SVN r21248.
2009-05-16 04:15:55 +00:00
Ralph Castain
c45ff0d59f Take the next step towards fully utilizing static ports for the daemons to eliminate the initial "phone home" to mpirun by modifying the orted termination procedure to eliminate the need for a full barrier-like operation. Instead, we add a "onesided" barrier to the grpcomm framework API that releases the orted once it has completed its own contribution to the barrier - i.e., the orteds now exit as the "ack" message rolls up towards mpirun instead of sending the "ack" directly to mpirun.
This causes the orteds in the routing tree to remain alive until all termination "acks" from orteds below them have passed through. Thus, if we use static ports, we no longer require a direct orted-to-mpirun connection.

Also modify the binomial routed module so it conforms to what all the other routed modules do and have all messages pass along the routing tree instead of short-circuiting between orteds. This further reduces the number of ports being opened on backend nodes.

This commit was SVN r21203.
2009-05-11 14:11:44 +00:00
Shiqing Fan
cd565923d3 Completely remove ltdl support for Windows build.
This commit was SVN r21170.
2009-05-05 18:59:13 +00:00
Ralph Castain
4be24521aa Modify the orte_process_info structure to handle a broader range of process types by replacing the individual booleans with a 32-bit bitmap. Use a set of #define's to define the individual bits, and a set of matching macros to test for them. Update the orte code base to use the macros instead of the booleans.
Minor mod to the ompi layer to use the new #define's - just one-line name replacements.

This commit was SVN r21144.
2009-05-04 11:07:40 +00:00
Rainer Keller
221fb9dbca ... Delayed due to notifier commits earlier this day ...
- Delete unnecessary header files using
   contrib/check_unnecessary_headers.sh after applying
   patches, that include headers, being "lost" due to
   inclusion in one of the now deleted headers...

   In total 817 files are touched.
   In ompi/mpi/c/ header files are moved up into the actual c-file,
   where necessary (these are the only additional #include),
   otherwise it is only deletions of #include (apart from the above
   additions required due to notifier...)

 - To get different MCAs (OpenIB, TM, ALPS), an earlier version was
   successfully compiled (yesterday) on:
   Linux locally using intel-11, gcc-4.3.2 and gcc-SVN + warnings enabled
   Smoky cluster (x86-64 running Linux) using PGI-8.0.2 + warnings enabled
   Lens cluster (x86-64 running Linux) using Pathscale-3.2 + warnings enabled

This commit was SVN r21096.
2009-04-29 01:32:14 +00:00
Shiqing Fan
3d4e0472d6 Add windows support files into the tarball, including .windows, CMakeLists.txt files, and CMake modules. Thanks to Jeff for testing it on Linux.
This commit was SVN r21069.
2009-04-24 16:39:33 +00:00
Rainer Keller
ec0ed48718 - Revert r20739
This commit was SVN r20742.

The following SVN revision numbers were found above:
  r20739 --> open-mpi/ompi@781caee0b6
2009-03-05 21:56:03 +00:00
Rainer Keller
a94438343b - Revert r20740
This commit was SVN r20741.

The following SVN revision numbers were found above:
  r20740 --> open-mpi/ompi@2a70618a77
2009-03-05 21:50:47 +00:00
Rainer Keller
2a70618a77 - Second patch, as discussed in Louisville.
Replace short macros in orte/util/name_fns.h
   to the actual fct. call.

 - Compiles on linux/x86-64

This commit was SVN r20740.
2009-03-05 21:14:18 +00:00
Rainer Keller
781caee0b6 - First of two or three patches, in orte/util/proc_info.h:
Adapt orte_process_info to orte_proc_info, and
   change orte_proc_info() to orte_proc_info_init().
 - Compiled on linux-x86-64
 - Discussed with Ralph

This commit was SVN r20739.
2009-03-05 20:36:44 +00:00
Rainer Keller
04567d3af0 - Header orte/mca/errmgr/errmgr.h is not needed.
Once again compiles fine with -Wimplicit-function-declaration   

This commit was SVN r20640.
2009-02-26 04:05:30 +00:00
Rainer Keller
d81443cc5a - On the way to get the BTLs split out and lessen dependency on orte:
Often, orte/util/show_help.h is included, although no functionality
   is required -- instead, most often opal_output.h, or               
   orte/mca/rml/rml_types.h                                           
   Please see orte_show_help_replacement.sh commited next.            

 - Local compilation (Linux/x86_64) w/ -Wimplicit-function-declaration
   actually showed two *missing* #include "orte/util/show_help.h"     
   in orte/mca/odls/base/odls_base_default_fns.c and                  
   in orte/tools/orte-top/orte-top.c                                  
   Manually added these.                                              

   Let's have MTT the last word.

This commit was SVN r20557.
2009-02-14 02:26:12 +00:00
Ralph Castain
0750103d6c Teach the routed modules that local slave processes are direct routes to/from their master daemon.
This commit was SVN r20467.
2009-02-06 15:41:53 +00:00
Ralph Castain
c92f906d7c Move the daemon collectives out of the ODLS and into the GRPCOMM framework. This removes the inherent assumption that the OOB topology is a tree, thus allowing different grpcomm/routed combinations to implement collectives appropriate to their topology.
This commit was SVN r20357.
2009-01-27 19:13:56 +00:00
Ralph Castain
5f5d8ad231 CID 1139-1141: remove outdated variable from the various routed components
This commit was SVN r20201.
2009-01-05 15:09:54 +00:00
Ralph Castain
9f6c1b9d07 Per discussion at the Dec ORTE design meeting, add an "set_lifeline" API to the orte_routed framework. This allows the caller to define a "lifeline" process so that, if the connection to that lifeline is subsequently lost, the process will be terminated. This helps tools that connect to an mpirun to know when that mpirun completes and terminates.
This commit was SVN r20158.
2008-12-20 23:23:11 +00:00
Shiqing Fan
a5281f0434 - 1/4 commit for Windows Visual Studio and CCP support:
CMakeLists and .windows files.
  In contribs preconfigured and precompiled parts.

This commit was SVN r20108.
2008-12-10 20:59:20 +00:00
Ralph Castain
9a57db4a81 To support comm_spawn in fully routed environments, daemons need to know the route to all procs in their job family. They already had this information, but were not retaining it. The infrastructure to do so has existed for some time - just never had the time to complete it.
This commit does that by ensuring that daemons retain knowledge of proc location for all procs in their job family. It required a minor change to the ESS API to allow the daemons to update their pidmaps as data was received. In addition, the routed modules have been updated to take advantage of the newly available info, and the encode/decode pidmap utilities have been updated to communicate the required info in the launch message.

This commit was SVN r20022.
2008-11-18 15:35:50 +00:00
Ralph Castain
25491628b8 Discovered while documenting the "preconnect" mca params that several of them didn't make sense any more. After chatting with Jeff, we agreed to the following:
1. register "mpi_preconnect_all" as a deprecated synonym for "mpi_preconnect_mpi"

2. remove "mpi_preconnect_oob" and "mpi_preconnect_oob_simultaneous" as these are no longer valid.

3. remove the routed framework's "warmup_routes" API. With the removal of the direct routed component, this function at best only wasted communications. The daemon routes are completely "warmed up" during launch, so having MPI procs order the sending of additional messages is simply wasteful.

4. remove the call to orte_routed.warmup_routes from MPI_Init. This was the only place it was used anyway.

The FAQs will be updated to reflect this changed situation, and a CMR filed to move this to the 1.3 branch.

This commit was SVN r19933.
2008-11-05 19:41:16 +00:00
Ralph Castain
f54fda489e This is a first step towards supporting fully-routed OOB communications:
1. remove direct routed module (hooray!)

2. add radix tree routed module (binomial remains default)

3. remove duplicate data storage - orteds were storing nidmap and pidmap data in odls, everyone else in ess

4. add ess APIs to update nidmap, add new pidmap - used only by orteds for MPI-2 support

5. modify code to eliminate multiple calls to orte_routed.update_route that recreated info already in ess pidmap. Add ess API to lookup that info instead. Modify routed modules to utilize that capability

6. setup new ability to shutdown orteds without sending back an "ack" message to mpirun - not utilized yet, will require some changes to plm terminate_orteds functions in managed environments (coming soon)

Initial tests indicating that fully routing comm via defined routing trees may not actually have a significant cost for operations like IB QP setup. More tests required to confirm.

This will require an autogen...

This commit was SVN r19866.
2008-10-31 21:10:00 +00:00
Ralph Castain
f4f81c7308 Let the HNP only update the routing tree if necessary. Enable some debug output
This commit was SVN r19676.
2008-10-03 13:41:08 +00:00
Ralph Castain
15c47a2473 Revise the daemon collective system to handle comm_spawn patterns that cross into new nodes that are not direct children on the routing tree of the HNP.
Refers to ticket #1548. Although this appears to fix the problem, the ticket will be held open pending further test prior to transition to the 1.3 branch.

This commit was SVN r19674.
2008-10-02 20:08:27 +00:00
Shiqing Fan
04ee20a880 - Mainly type casts. Microsoft VC++ compiler is too strict.
This commit was SVN r19517.
2008-09-08 15:39:30 +00:00
Jeff Squyres
0af7ac53f2 Fixes trac:1392, #1400
* add "register" function to mca_base_component_t
   * converted coll:basic and paffinity:linux and paffinity:solaris to
     use this function
   * we'll convert the rest over time (I'll file a ticket once all
     this is committed)
 * add 32 bytes of "reserved" space to the end of mca_base_component_t
   and mca_base_component_data_2_0_0_t to make future upgrades
   [slightly] easier
   * new mca_base_component_t size: 196 bytes
   * new mca_base_component_data_2_0_0_t size: 36 bytes
 * MCA base version bumped to v2.0
   * '''We now refuse to load components that are not MCA v2.0.x'''
 * all MCA frameworks versions bumped to v2.0
 * be a little more explicit about version numbers in the MCA base
   * add big comment in mca.h about versioning philosophy

This commit was SVN r19073.

The following Trac tickets were found above:
  Ticket 1392 --> https://svn.open-mpi.org/trac/ompi/ticket/1392
2008-07-28 22:40:57 +00:00
Ralph Castain
a4f0fa6e3a Update the routed framework to:
1. add a new API delete_route(orte_process_name_t*) to delete the specified proc from the routing table

2. modify update_route so that it actually updates pre-existing routes instead of only adding routing info the end of the hash table

This fixes ticket #1403

This commit was SVN r18970.
2008-07-21 21:37:09 +00:00
Ralph Castain
ba5498cdc6 Repair the MPI-2 dynamic operations. This includes:
1. repair of the linear and direct routed modules

2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI

3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature

4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes.

Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB

5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept.

Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules.

6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch

7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch

8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies

9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc.

10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon

There is still more cleanup to be done for efficiency, but this at least works.

Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn.

Fixes ticket #1256

This commit was SVN r18804.
2008-07-03 17:53:37 +00:00
Ralph Castain
c693d3a5d1 I hadn't honestly considered before that an MPI process might attempt to call functions in the routed framework intended solely for daemons and HNPs. By design, MPI processes are not allowed to route RML/OOB messages, and hence the routed module in an MPI process has no knowledge whatsoever of how a message will reach its destination (except in the direct module). Thus, it has no way to return a valid routing tree, update a routing tree, or get wireup info.
This commit ensures that attempts to access information that is unknowable or undefined returns appropriate invalid or not_supported values to avoid unexpected behavior and/or segfaults.

This commit was SVN r18692.
2008-06-20 03:26:13 +00:00
Ralph Castain
3b5e80fa61 Shift responsibility for preconnecting the oob to the orte routed framework, which is the only place that knows what needs to be done. Only the direct module will actually do anything - it uses the same algo as the original preconnect function.
This commit was SVN r18677.
2008-06-19 13:48:26 +00:00
Ralph Castain
0532d799d6 Complete implementation of the --without-rte-support configure option. Working with Brian, this has been tested on RedStorm.
Some minor changes to help facilitate debugger support so that both mpirun and yod can operate with it. Still to be completed.

This commit was SVN r18664.
2008-06-18 03:15:56 +00:00
Ralph Castain
9613b3176c Effectively revert the orte_output system and return to direct use of opal_output at all levels. Retain the orte_show_help subsystem to allow aggregation of show_help messages at the HNP.
After much work by Jeff and myself, and quite a lot of discussion, it has become clear that we simply cannot resolve the infinite loops caused by RML-involved subsystems calling orte_output. The original rationale for the change to orte_output has also been reduced by shifting the output of XML-formatted vs human readable messages to an alternative approach.

I have globally replaced the orte_output/ORTE_OUTPUT calls in the code base, as well as the corresponding .h file name. I have test compiled and run this on the various environments within my reach, so hopefully this will prove minimally disruptive.

This commit was SVN r18619.
2008-06-09 14:53:58 +00:00
Jeff Squyres
e7ecd56bd2 This commit represents a bunch of work on a Mercurial side branch. As
such, the commit message back to the master SVN repository is fairly
long.

= ORTE Job-Level Output Messages =

Add two new interfaces that should be used for all new code throughout
the ORTE and OMPI layers (we already make the search-and-replace on
the existing ORTE / OMPI layers):

 * orte_output(): (and corresponding friends ORTE_OUTPUT,
   orte_output_verbose, etc.)  This function sends the output directly
   to the HNP for processing as part of a job-specific output
   channel.  It supports all the same outputs as opal_output()
   (syslog, file, stdout, stderr), but for stdout/stderr, the output
   is sent to the HNP for processing and output.  More on this below.
 * orte_show_help(): This function is a drop-in-replacement for
   opal_show_help(), with two differences in functionality:
   1. the rendered text help message output is sent to the HNP for
      display (rather than outputting directly into the process' stderr
      stream)
   1. the HNP detects duplicate help messages and does not display them
      (so that you don't see the same error message N times, once from
      each of your N MPI processes); instead, it counts "new" instances
      of the help message and displays a message every ~5 seconds when
      there are new ones ("I got X new copies of the help message...")

opal_show_help and opal_output still exist, but they only output in
the current process.  The intent for the new orte_* functions is that
they can apply job-level intelligence to the output.  As such, we
recommend that all new ORTE and OMPI code use the new orte_*
functions, not thei opal_* functions.

=== New code ===

For ORTE and OMPI programmers, here's what you need to do differently
in new code:

 * Do not include opal/util/show_help.h or opal/util/output.h.
   Instead, include orte/util/output.h (this one header file has
   declarations for both the orte_output() series of functions and
   orte_show_help()).
 * Effectively s/opal_output/orte_output/gi throughout your code.
   Note that orte_output_open() takes a slightly different argument
   list (as a way to pass data to the filtering stream -- see below),
   so you if explicitly call opal_output_open(), you'll need to
   slightly adapt to the new signature of orte_output_open().
 * Literally s/opal_show_help/orte_show_help/.  The function signature
   is identical.

=== Notes ===

 * orte_output'ing to stream 0 will do similar to what
   opal_output'ing did, so leaving a hard-coded "0" as the first
   argument is safe.
 * For systems that do not use ORTE's RML or the HNP, the effect of
   orte_output_* and orte_show_help will be identical to their opal
   counterparts (the additional information passed to
   orte_output_open() will be lost!).  Indeed, the orte_* functions
   simply become trivial wrappers to their opal_* counterparts.  Note
   that we have not tested this; the code is simple but it is quite
   possible that we mucked something up.

= Filter Framework =

Messages sent view the new orte_* functions described above and
messages output via the IOF on the HNP will now optionally be passed
through a new "filter" framework before being output to
stdout/stderr.  The "filter" OPAL MCA framework is intended to allow
preprocessing to messages before they are sent to their final
destinations.  The first component that was written in the filter
framework was to create an XML stream, segregating all the messages
into different XML tags, etc.  This will allow 3rd party tools to read
the stdout/stderr from the HNP and be able to know exactly what each
text message is (e.g., a help message, another OMPI infrastructure
message, stdout from the user process, stderr from the user process,
etc.).

Filtering is not active by default.  Filter components must be
specifically requested, such as:

{{{
$ mpirun --mca filter xml ...
}}}

There can only be one filter component active.

= New MCA Parameters =

The new functionality described above introduces two new MCA
parameters:

 * '''orte_base_help_aggregate''': Defaults to 1 (true), meaning that
   help messages will be aggregated, as described above.  If set to 0,
   all help messages will be displayed, even if they are duplicates
   (i.e., the original behavior).
 * '''orte_base_show_output_recursions''': An MCA parameter to help
   debug one of the known issues, described below.  It is likely that
   this MCA parameter will disappear before v1.3 final.

= Known Issues =

 * The XML filter component is not complete.  The current output from
   this component is preliminary and not real XML.  A bit more work
   needs to be done to configure.m4 search for an appropriate XML
   library/link it in/use it at run time.
 * There are possible recursion loops in the orte_output() and
   orte_show_help() functions -- e.g., if RML send calls orte_output()
   or orte_show_help().  We have some ideas how to fix these, but
   figured that it was ok to commit before feature freeze with known
   issues.  The code currently contains sub-optimal workarounds so
   that this will not be a problem, but it would be good to actually
   solve the problem rather than have hackish workarounds before v1.3 final.

This commit was SVN r18434.
2008-05-13 20:00:55 +00:00
Ralph Castain
d97a4f880d Shift the daemon collective operation to the ODLS framework. Ensure we track the collectives per job to avoid race conditions. Take advantage of the new capabilities of the routed framework to define aggregating trees for the daemon collective, and to track which daemons are participating to handle the case of sparse participation.
Make it all work with comm_spawn in the case of all procs on previously occupied nodes, some new procs on new nodes, and mixtures of the two.

Note: comm_spawn now works with both binomial and linear routed modules. There remains a problem of spawned procs not properly getting updated contact info for the parent proc when run in the direct routed mode...but that's for another day.

This commit was SVN r18385.
2008-05-06 20:16:17 +00:00
Josh Hursey
9971bc9d95 Merge in the mca_base_select changes per RFC:
http://www.open-mpi.org/community/lists/devel/2008/04/3779.php

{{{
svn merge -r 18276:18380 https://svn.open-mpi.org/svn/ompi/tmp-public/jjh-mca-play .
}}}

Any components not in the trunk, but in one of the effected frameworks *must* be
updated. Contact the list, look at the RFC, or look at the diff for how to do this.

Sorry for the early commit of this, but I wanted to get it in today (per RFC) and
didn't know if I would have a chance later today.

This commit was SVN r18381.
2008-05-06 18:08:45 +00:00
Ralph Castain
40904dd152 Add a binomial routed module - for now, still completely wires up the daemons, but that will be changed later.
Modify grpcomm xcast so it now uses the selected routed module - eliminates cross-wiring of xcast and routing paths. Suboptimal at the moment, but better implementation is on its way.

Cleanup ignore properties on the new routed components.

This commit was SVN r18377.
2008-05-05 22:32:25 +00:00