masks between the mask argument and a local PLPA mask. There were three
problems:
1) The "get" function computed the number of bits as sizeof(mask),
which is the size of the pointer to the mask rather than the mask
itself. So, only 4 bits were copied with m32 and 8 bits with m64.
There are actually 1024 bits.
2) The "get" and "set" functions both copied a number of bits computed
from the sizeof() mask, but sizeof() reports the number of bytes.
We have to multiply by 8 to get the number of bits.
3) These two functions check to make sure tha the mask argument is not
bigger than the PLPA mask. But, the set function copies a number
of bits in the PLPA mask, which is conceivably greater than the
number of bits in the mask argument. So, accesses to the mask
argument may overrun that argument.
Problems 1 and 2 meant that one would encounter errors when the number of
cores exceeded 4 (with -m32) or 8 (with -m64). Problem 3 probably caused
no errors.
This commit was SVN r21993.
The new options work by adding an ":if-avail" qualifier to the "bind-to-socket" and "bind-to-core" MCA params. If the system does not support this capability, the job will launch anyway. Without the qualifier, the job will abort with an error message indicating that the required functionality is not supported on this system.
This commit was SVN r21975.
#if defined (c_plusplus)
defined (__cplusplus)
followed by
extern "C" {
and the closing counterpart by BEGIN_C_DECLS and END_C_DECLS.
Notable exceptions are:
- opal/include/opal_config_bottom.h:
This is our generated code, that itself defines BEGIN_C_DECL and
END_C_DECL
- ompi/mpi/cxx/mpicxx.h:
Here we do not include opal_config_bottom.h:
- Belongs to external code:
opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.c
opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.h
- opal/include/opal/prefetch.h:
Has C++ specific macros that are protected:
- Had #if ... } #endif _and_ END_C_DECLS (aka end up with 2x
END_C_DECLS)
ompi/mca/btl/openib/btl_openib.h
- opal/event/event.h has #ifdef __cplusplus as BEGIN_C_DECLS...
- opal/win32/ompi_process.h: had extern "C"\n {...
opal/win32/ompi_process.h: dito
- ompi/mca/btl/pcie/btl_pcie_lex.l: needed to add *_C_DECLS
ompi/mpi/f90/test/align_c.c: dito
- ompi/debuggers/msgq_interface.h: used #ifdef __cplusplus
- ompi/mpi/f90/xml/common-C.xsl: Amend
Tested on linux using --with-openib and --with-mx
The following do not contain either opal_config.h, orte_config.h or
ompi_config.h
(but possibly other header files, that include one of the above):
ompi/mca/bml/r2/bml_r2_ft.h
ompi/mca/btl/gm/btl_gm_endpoint.h
ompi/mca/btl/gm/btl_gm_proc.h
ompi/mca/btl/mx/btl_mx_endpoint.h
ompi/mca/btl/ofud/btl_ofud_endpoint.h
ompi/mca/btl/ofud/btl_ofud_frag.h
ompi/mca/btl/ofud/btl_ofud_proc.h
ompi/mca/btl/openib/btl_openib_mca.h
ompi/mca/btl/portals/btl_portals_endpoint.h
ompi/mca/btl/portals/btl_portals_frag.h
ompi/mca/btl/sctp/btl_sctp_endpoint.h
ompi/mca/btl/sctp/btl_sctp_proc.h
ompi/mca/btl/tcp/btl_tcp_endpoint.h
ompi/mca/btl/tcp/btl_tcp_ft.h
ompi/mca/btl/tcp/btl_tcp_proc.h
ompi/mca/btl/template/btl_template_endpoint.h
ompi/mca/btl/template/btl_template_proc.h
ompi/mca/btl/udapl/btl_udapl_eager_rdma.h
ompi/mca/btl/udapl/btl_udapl_endpoint.h
ompi/mca/btl/udapl/btl_udapl_mca.h
ompi/mca/btl/udapl/btl_udapl_proc.h
ompi/mca/mtl/mx/mtl_mx_endpoint.h
ompi/mca/mtl/mx/mtl_mx.h
ompi/mca/mtl/psm/mtl_psm_endpoint.h
ompi/mca/mtl/psm/mtl_psm.h
ompi/mca/pml/cm/pml_cm_component.h
ompi/mca/pml/csum/pml_csum_comm.h
ompi/mca/pml/dr/pml_dr_comm.h
ompi/mca/pml/dr/pml_dr_component.h
ompi/mca/pml/dr/pml_dr_endpoint.h
ompi/mca/pml/dr/pml_dr_recvfrag.h
ompi/mca/pml/example/pml_example.h
ompi/mca/pml/ob1/pml_ob1_comm.h
ompi/mca/pml/ob1/pml_ob1_component.h
ompi/mca/pml/ob1/pml_ob1_endpoint.h
ompi/mca/pml/ob1/pml_ob1_rdmafrag.h
ompi/mca/pml/ob1/pml_ob1_recvfrag.h
ompi/mca/pml/v/pml_v_output.h
opal/include/opal/prefetch.h
opal/mca/timer/aix/timer_aix.h
opal/util/qsort.h
test/support/components.h
This commit was SVN r21855.
The following SVN revision numbers were found above:
r2 --> open-mpi/ompi@58fdc18855
Adds several new mpirun options:
* -bysocket - assign ranks on a node by socket. Effectively load balances the procs assigned to a node across the available sockets. Note that ranks can still be bound to a specific core within the socket, or to the entire socket - the mapping is independent of the binding.
* -bind-to-socket - bind each rank to all the cores on the socket to which they are assigned.
* -bind-to-core - currently the default behavior (maintained from prior default)
* -npersocket N - launch N procs for every socket on a node. Note that this implies we know how many sockets are on a node. Mpirun will determine its local values. These can be overridden by provided values, either via MCA param or in a hostfile
Similar features/options are provided at the board level for multi-board nodes.
Documentation to follow...
This commit was SVN r21791.
Revamp the affinity detection/set procedure in mpi_init to correctly detect when we have already been bound to processors, given the revised understanding of paffinity_get. Add a new paffinity macro to make checking for already bound a little nicer.
This commit was SVN r21402.
1. replacing mpi_paffinity_alone with opal_paffinity_alone - for back-compatibility, I have aliased mpi_paffinity_alone to the new param name. This caus
es a mild abstraction break in the opal/mca/paffinity framework - per the devel discussion...live with it. :-) I also moved the ompi_xxx global variable
that tracked maffinity setup so it could be properly closed in MPI_Finalize to the opal/mca/maffinity framework to avoid an abstraction break.
2. Added code to the odls/default module to perform paffinity binding and maffinity init between process fork and exec. This has been tested on IU's odi
n cluster and works for both MPI and non-MPI apps.
3. Revise MPI_Init to detect if affinity has already been set, and to attempt to set it if not already done. I have *not* tested this as I haven't yet f
igured out a way to do so - I couldn't get slurm to perform cpu bindings, even though it supposedly does do so.
This has only been lightly tested and would definitely benefit from a wider range of evaluation...
This commit was SVN r21209.
- Delete unnecessary header files using
contrib/check_unnecessary_headers.sh after applying
patches, that include headers, being "lost" due to
inclusion in one of the now deleted headers...
In total 817 files are touched.
In ompi/mpi/c/ header files are moved up into the actual c-file,
where necessary (these are the only additional #include),
otherwise it is only deletions of #include (apart from the above
additions required due to notifier...)
- To get different MCAs (OpenIB, TM, ALPS), an earlier version was
successfully compiled (yesterday) on:
Linux locally using intel-11, gcc-4.3.2 and gcc-SVN + warnings enabled
Smoky cluster (x86-64 running Linux) using PGI-8.0.2 + warnings enabled
Lens cluster (x86-64 running Linux) using Pathscale-3.2 + warnings enabled
This commit was SVN r21096.
forgotten to save before the commit was sent.
This comment explains why we're doing a cache check here rather than a
real check.
This commit was SVN r20975.
component (which we probably don't test regularly because we probably
only test environments where the other paffinity components are used)
was not getting built because it had a bad configure test.
This commit was SVN r20974.
In case we use memcmp, strlen, strup and friends include <string.h>
Also several constants.h are not included directly
- Let's have mca_topo_base_cart_create return ompi-errors in
ompi/mca/topo/base/topo_base_cart_create.c
This commit was SVN r20773.
known-bad memory access pattern. Specifically, a NULL pointer is
passed in a system call as part of a probe to figure out which
affinity API this system has. We know it's a NULL and we did it on
purpose, so don't have Valgrind yell about it.
This commit was SVN r20572.
The prior ompi_proc_t structure had a uint8_t flag field in it, where only one
bit was used to flag that a proc was "local". In that context, "local" was
constrained to mean "local to this node".
This commit provides a greater degree of granularity on the term "local", to include tests
to see if the proc is on the same socket, PC board, node, switch, CU (computing
unit), and cluster.
Add #define's to designate which bits stand for which local condition. This
was added to the OPAL layer to avoid conflicting with the proposed movement of
the BTLs. To make it easier to use, a set of macros have been defined - e.g.,
OPAL_PROC_ON_LOCAL_SOCKET - that test the specific bit. These can be used in
the code base to clearly indicate which sense of locality is being considered.
All locations in the code base that looked at the current proc_t field have
been changed to use the new macros.
Also modify the orte_ess modules so that each returns a uint8_t (to match the
ompi_proc_t field) that contains a complete description of the locality of this
proc. Obviously, not all environments will be capable of providing such detailed
info. Thus, getting a "false" from a test for "on_local_socket" may simply
indicate a lack of knowledge.
This commit was SVN r20496.
base/paffinity_base_service.c:153: warning: 'phys_core' may be used uninitialized in this function
base/paffinity_base_service.c:153: note: 'phys_core' was declared here
This commit was SVN r19580.
See opal/mca/paffinity/paffinity.h for explanation as to the physical vs logical nature of the params used in the API.
Fixes trac:1435
This commit was SVN r19391.
The following Trac tickets were found above:
Ticket 1435 --> https://svn.open-mpi.org/trac/ompi/ticket/1435
Bring in a new version of PLPA (v1.2b2) with some new capabilities for
offline processors and mapping of the Nth processor/socket/core to its
corresponding Linux processor/socket/core ID.
(Sorry for the configure change in the middle of the day, folks -- I
need it to be able to continue to integrate paffinity changes for
#1435...)
This commit was SVN r19282.
The following Trac tickets were found above:
Ticket 1435 --> https://svn.open-mpi.org/trac/ompi/ticket/1435
* Make the results of the top-level configure.ac test for
_SC_NPROCESSORS_ONLN be cached so that we can check for it
elsewhere (e.g., opal/mca/paffinity/posix/configure.m4)
* Update top-level configure.ac test for _SC_NPROCESSORS_ONLN: stamp
out another AC_TRY_COMPILE
* Ensure paffinity:posix doesn't even try to compile if we don't
have _SC_NPROCESSORS_ONLN
* Minor style updates
This commit was SVN r19118.
* add "register" function to mca_base_component_t
* converted coll:basic and paffinity:linux and paffinity:solaris to
use this function
* we'll convert the rest over time (I'll file a ticket once all
this is committed)
* add 32 bytes of "reserved" space to the end of mca_base_component_t
and mca_base_component_data_2_0_0_t to make future upgrades
[slightly] easier
* new mca_base_component_t size: 196 bytes
* new mca_base_component_data_2_0_0_t size: 36 bytes
* MCA base version bumped to v2.0
* '''We now refuse to load components that are not MCA v2.0.x'''
* all MCA frameworks versions bumped to v2.0
* be a little more explicit about version numbers in the MCA base
* add big comment in mca.h about versioning philosophy
This commit was SVN r19073.
The following Trac tickets were found above:
Ticket 1392 --> https://svn.open-mpi.org/trac/ompi/ticket/1392
Modify the odls to remove a (size_t) typecast in front of the num_processors variable just in case it is returned negative. This usually is accompanied by an opal_error, so this shouldn't make any difference - but it is more technically correct.
This commit was SVN r19008.
* Fix linux paffinity component to make a "best" guess when PLPA
can't find topology information in the Linux kernel. That is, if
PLPA can't tell us the max_processor_id, just assume that it's the
same as the number of processors. If you have a more complex
system than that (e.g., you have holes in your available processor
IDs), you'll likely be running a Linux kernel that supports the
topology information, and this problem won't happen.
* Make sure to conver the return codes from PLPA to OPAL_ERR* codes.
This commit was SVN r19001.
The following Trac tickets were found above:
Ticket 1250 --> https://svn.open-mpi.org/trac/ompi/ticket/1250
For now, hide the OSX component with .ompi_ignore so only I can see it until I can ensure that it doesn't inadvertently interfere with Linux and Solaris support.
This clears the conflict with Windows.
This commit was SVN r18989.
Short version: remove opal_paffinity_alone and restore
mpi_paffinity_alone. ORTE makes various information available for the
MPI layer to decide what it wants to do in terms of processor
affinity.
Details:
* remove opal_paffinity_alone MCA param; restore mpi_paffinity_alone
MCA param
* move opal_paffinity_slot_list param registration to paffinity base
* ompi_mpi_init() calls opal_paffinity_base_slot_list_set(); if that
succeeds use that. If no slot list was set, see if
mpi_paffinity_alone was set. If so, bind this process to its Node
Local Rank (NLR). The NLR is the ORTE-maintained slot ID; if you
COMM_SPAWN to a host in this ORTE universe that already has procs
on it, the NLR for the new job will start at N (not 0). So this is
slightly better than mpi_paffinity_alone in the v1.2 series.
* If a slot list is specified *and* mpi_paffinity_alone is set, we
display an error and abort.
* Remove calls from rmaps/rank_file component to register and lookup
opal_paffinity mca params.
* Remove code in orte/odls that set affinities - instead, have them
just pass a slot_list if it exists.
* Cleanup the orte/odls code that determined
oversubscribed/want_processor as these were just opposites of each
other.
This commit was SVN r18874.
The following Trac tickets were found above:
Ticket 1383 --> https://svn.open-mpi.org/trac/ompi/ticket/1383
1. If we don't have the topology information, don't bother trying to
create cross-referencing information
1. Ensure to only check for valid processor ID's
This commit was SVN r18462.
http://www.open-mpi.org/community/lists/devel/2008/04/3779.php
{{{
svn merge -r 18276:18380 https://svn.open-mpi.org/svn/ompi/tmp-public/jjh-mca-play .
}}}
Any components not in the trunk, but in one of the effected frameworks *must* be
updated. Contact the list, look at the RFC, or look at the diff for how to do this.
Sorry for the early commit of this, but I wanted to get it in today (per RFC) and
didn't know if I would have a chance later today.
This commit was SVN r18381.
1. applied prefix rule to functions and variables of RMAPS rank_file component
2. cleaned ompi_mpi_init.c from paffinity code
3. paffinity code moved to new opal/mca/paffinity/base/paffinity_base_service.c file
4. added opal_paffinity_slot_list mca parameter
This commit was SVN r18019.
Greatly reduce the number of "foo" -> "opal_foo" symbol renames in the
libevent source, and instead greatly expand the event_rename.h file
that uses preprocessor macros to make all public symbols be
"opal_foo".
This commit was SVN r17923.
map_to_processor_id,
map_to_socket_core,
max_processor_id,
max_socket,
max_core.
In OS other then Linux, those functions will return OPAL_ERR_NOT_SUPPORTED.
--This Line, and those below, will be ignored--
M paffinity/linux/paffinity_linux_module.c
M paffinity/paffinity.h
M paffinity/base/base.h
M paffinity/base/paffinity_base_wrappers.c
M paffinity/windows/paffinity_windows_module.c
M paffinity/solaris/paffinity_solaris_module.c
This commit was SVN r17173.
about linkers, have all OPAL, ORTE, and OMPI components '''not'' link
against the OPAL, ORTE, or OMPI libraries.
See ttp://www.open-mpi.org/community/lists/users/2007/10/4220.php for
details (or https://svn.open-mpi.org/trac/ompi/wiki/Linkers for a
better-formatted version of the same info).
This commit was SVN r16968.
A subset of this patch needs to be applied to v1.2
Refs trac:928
This commit was SVN r15918.
The following Trac tickets were found above:
Ticket 928 --> https://svn.open-mpi.org/trac/ompi/ticket/928
Ensure that the AM_CONDITIONALs are ''always'' run, even if we
--enable-mca-no-build the paffinity/linux component.
This commit was SVN r15095.
The following Trac tickets were found above:
Ticket 1057 --> https://svn.open-mpi.org/trac/ompi/ticket/1057
re-enabling compilation of this component.
However, it still won't compile because this component provides a
module finalize function which apparently somehow got dropped from the
paffinity base. Support for the paffinity module finalize function
needs to be re-added.
This commit was SVN r14915.
* Enable VPATH builds to work (slight tweak of r14895 -- mainly
because I already had it done when George committed :-) )
* Enable "make dist" to work properly for PLPA included mode
* Update plpa.h.in
* Update svn:ignore
Took relevant changes back to the main PLPA SVN as well.
This commit was SVN r14896.
The following SVN revision numbers were found above:
r14895 --> open-mpi/ompi@bb7b04e875
Changes paffinity interface to use a cpu mask for available/preferred cpus
rather than the current coarse grained paffinity that lets the OS choose
which processor.
Macros for setting and clearing masks are provided.
Solaris and windows changes have not been made. Solaris subdirectory has some
suggested changes - however the relevant man pages for the Solaris 10 APIs
have some ambiguity regarding order in which one create and sets a processor
set. As we did not have access to a solaris 10 machine we could not test to
see the correct way to do the work under solaris.
This commit was SVN r14887.
Per discussions with Brian and Ralph, make a slight correction in
where components are installed. Use $pkglibdir, not $libdir/openmpi,
so that when compiled in the orte trunk, components are installed to
the right directory (because the component search patch is checking
$pkglibdir).
This commit was SVN r14345.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r14289
