match similar stuff in the event framework; only add CPPFLAGS /
LDFLAGS / LIBS / and WRAPPER_EXTRA_* of the same for the one, single,
winning component (because this framework is compile-time,
one-of-many).
This commit was SVN r25199.
only became evident when there was more than one event component.
The libevent2013 component is still ompi_ignore'd for most developers.
This commit was SVN r25198.
Since hwloc has a dynamic bitmap size, it could actually have bits set
that will not fit in the paffinity mask. We already made sure that we
didn't overrun the paffinity mask; now also set the return value to
OPAL_ERR_VALUE_OUT_OF_BOUNDS (wow, we really thought of everything
with those error codes, eh?) if the hwloc bitmap has bits set higher
than what will fit into the paffinity bitmask.
This commit was SVN r25179.
The following Trac tickets were found above:
Ticket 2854 --> https://svn.open-mpi.org/trac/ompi/ticket/2854
* change components from setting <framework>_base_include to
opal_<framework>_<component>_include; the framework m4 will figure
out the winning component and pick the right "include" shell
variable. Ditto for the other shell variables (cppflags, ldflags,
etc.).
* misc fixes to hwloc/external
* add a bunch of missing "opal_" prefixes to shell variables
* add a few more / update a few comments in framework m4's
This commit was SVN r25174.
maffinity_base_bind_failure_action MCA params to the hwloc base
(hwloc_base_alloc_polocy and hwloc_base_bind_failure_action). Since
these MCA parameters were never on a release branch, I'm just
moving/renaming them outright and not leaving aliases to the old
names.
Note that some upper layer needs to call
opal_hwloc_base_set_process_membind_policy() to set the
set-by-MCA-param process-wide memory affinity policy. We can't do
this automatically during hwloc_base_open() because, for reasons
described elsewhere, opal_hwloc_topology is not automatically filled
during hwloc_base_open() (in short: potential scalability issues when
launching many MPI processes simultaneously on a single machine, for
example).
This commit was SVN r25156.
paffinity/hwloc components were still calling hwloc_topology_init/load
themselves, and not using the opal_hwloc_topology. Doh!
This commit fixes that -- these 2 components no longer have their own
copy of the topology tree; they just use opal_hwloc_topology.
This commit was SVN r25151.
the command line, hwloc is just like any other external dependency
in OMPI: if we find it, we'll use it. If we don't find it, we'll
ignore it. See comments in opal/mca/hwloc/configure.m4 for an
explanation.
* Fix some copy-n-paste errors in opal/mca/hwloc/configure.m4
w.r.t. flags coming in from the winning component.
* Add another line in ompi_info's output about whether hwloc support
is included or not.
This commit was SVN r25134.
specify btl_tcp_if_include because btl_tcp_if_exclude is defaulted to
the loopback devices.
This commit does a few things:
* Introduce a new OPAL MCA base function:
mca_base_param_check_exclusive_string(). It checks to see that the
''user'' does not set two MCA parameters that are mutually
exclusive by checking the source of those MCS param values.
* Use the above function in many BTLs (and the OOB TCP) to ensure
that <foo>_if_include and <foo>_if_exclude are not both specified
''by the user''.
* Re-arrange many of these BTLs to move their MCA registration code
into a separate component_register() function (vs. the
component_open() function).
This code has been nominally reviewed and checked by Ralph, George,
Terry, and Shiqing.
This commit was SVN r25043.
The following SVN revision numbers were found above:
r24976 --> open-mpi/ompi@8f4ac54336
that enabling "local_only" by default could cause excessive
by-NUMA-node paging and/or OOMs (rather than allowing memory
allocations to spill over to other NUMA nodes).
This brought home the very real-world example of people buying servers
with more processors/cores than they need, just to get more memory.
We wouldn't want Badness to occur in such scenarios by default.
Instead, let people turn on "only allow memory allocations on my local
NUMA node" if their application would benefit from it.
This commit was SVN r24648.
After a long period of development with many starts and stops, we
finally got this where we wanted it.
This commit introduces 2 new MCA params (note that the
"maffinity_libnuma_policy" MCA param introduced by r24290 was removed
when libnuma support was removed). Remember that maffinity policies
are only in effect when paffinity is enaabled -- i.e., when processes
are bound to processors!
* '''maffinity_base_alloc_policy:''' Policy that determines how
general memory allocations are bound after MPI_INIT. A value of
"none" means that no memory policy is applied. A value of
"local_only" means that all memory allocations will be restricted
to the local NUMA node where each process is placed. Note that
operating system paging policies are unaffected by this setting.
For example, if "local_only" is used and local NUMA node memory is
exhausted, a new memory allocation may cause paging.
* '''maffinity_base_bind_failure_action:''' What Open MPI will do if
it explicitly tries to bind memory to a specific NUMA location, and
fails. Note that this is a different case than the general
allocation policy described by maffinity_base_alloc_policy. A
value of "warn" means that Open MPI will warn the first time this
happens, but allow the job to continue (possibly with degraded
performance). A value of "error" means that Open MPI will abort
the job if this happens.
This needs at least a little soak time on the trunk before going to
v1.5.
This commit was SVN r24639.
The following SVN revision numbers were found above:
r24290 --> open-mpi/ompi@afa654746c
The following Trac tickets were found above:
Ticket 2698 --> https://svn.open-mpi.org/trac/ompi/ticket/2698
Upgrade to hwloc 1.2 (from hwloc 1.1.2). This should fix the problems
Nathan's seeing in #2778.
Let's let this soak on the trunk for a little while and see how LANL's
MTT's work out. If that works, then we can CMR this to v1.5.
This commit was SVN r24635.
The following Trac tickets were found above:
Ticket 2778 --> https://svn.open-mpi.org/trac/ompi/ticket/2778
Nth core, so it fell over to try to find the Nth PU.
-----
hwloc isn't able to find cores on all platforms. Example: PPC64
running RHEL 5.4 (linux kernel 2.6.18) only reports NUMA nodes and
PU's. Fine.
However, note that hwloc_get_obj_by_type() will return NULL in 2
(effectively) different cases:
- no objects of the requested type were found
- the Nth object of the requested type was not found
So first we have to see if we can find *any* cores by looking for the
0th core. If we find it, then try to find the Nth core. Otherwise,
try to find the Nth PU.
This commit was SVN r24632.
Rename the memusage sensor plugin to "resusage" as it will soon be updated to include full process stat monitoring.
Extend the heartbeat sensor to report node and process stats in the heartbeat.
Store the process and node stats in their respective orte_xxx_t object.
This commit was SVN r24629.
released):
backport hwloc r 3416 from trunk: Add cache info entry _after_ checking
that we need one, thanks Andriy Gapon for the fix
This commit was SVN r24612.
The following SVN revision numbers were found above:
r3418 --> open-mpi/ompi@9972663a12
appeared multiple times in ompi_info output (so did others, but this
is the one that was noticed). Ensure that we don't repeat
opal_paffinity_base_register_params() multiple times.
This commit was SVN r24569.
fix will be included in hwloc 1.1.2.
Brad -- can you verify that this fixes the issue for you?
Fixes trac:2732.
This commit was SVN r24450.
The following Trac tickets were found above:
Ticket 2732 --> https://svn.open-mpi.org/trac/ompi/ticket/2732
filenames -- don't include the project name ("opal")
* Don't link maffinity/hwloc and paffinity/hwloc against the common
hwloc in the static build case (because this will result in
duplicate symbols)
This commit was SVN r24447.
hopefully, this now compiles for libnuma 0.9.x and libnuma 2.0.x.
Fixes for the strategy discussed in the commit message for r24442
(i.e., check against numa_get_mems_allowed(), which only exists in
libnuma 2.0.x) and the new new new plan on #2698 coming in a separate
commit.
This commit was SVN r24443.
The following SVN revision numbers were found above:
r24442 --> open-mpi/ompi@90a8fe4aad
(with libnuma-2.0.4 / LIBNUMA_API_VERSION 2): numa_get_run_node_mask
returns a struct bitmask *.
Whether it's a good idea to blindly pass that on to
numa_set_membind() is another matter: one might want to match against
the list returned by numa_get_mems_allowed(), which may be set by the
outside environment.
Refs trac:2698.
This commit was SVN r24442.
The following SVN revision numbers were found above:
r24421 --> open-mpi/ompi@31510e683b
The following Trac tickets were found above:
Ticket 2698 --> https://svn.open-mpi.org/trac/ompi/ticket/2698
what memory node the process is running on (which is guaranteed to be
a good answer because maffinity won't be invoked unless the process is
already bound to a specific processor), and then bind our memory to
that.
Refs trac:2698.
This commit was SVN r24421.
The following SVN revision numbers were found above:
r24290 --> open-mpi/ompi@afa654746c
The following Trac tickets were found above:
Ticket 2698 --> https://svn.open-mpi.org/trac/ompi/ticket/2698
Temporarily remove hwloc's internal version of myriexpress.h. It is
causing a problem when compiling Open MPI with MX support because
hwloc uses AC_CONFIG_HEADER in hwloc's hwloc.m4 to generate
opal/mca/paffinity/hwloc/hwloc/include/hwloc/config.h.
AC_CONFIG_HEADER apparently has the (undocumented) side effect of
adding -I$(top_builddir)/opal/mca/paffinity/hwloc/hwloc/include/hwloc
to OMPI's compilation flags. Hence, when the OMPI MX components are
compiled and #include "myriexpress.h" (or <myriexpress.h>) they see
hwloc's myriexpress.h before the system one. Badness ensures.
This removal is temporary because we need to figure out a better
solution. But for now, OMPI is not using hwloc's myriexpress.h file --
so it's safe to remove. I'll push this issue upstream to hwloc to
figure out a better solution...
This commit was SVN r24354.
The following Trac tickets were found above:
Ticket 2690 --> https://svn.open-mpi.org/trac/ompi/ticket/2690
Short Version:
--------------
Event engine needs to be flushed so it does not use old/stale file descriptors.
Long Version:
-------------
The problem was that the restarted process was waiting for the socket to the local daemon to finish establishing during the 'sync' operation. The core problem was that the daemon was sending a header of 36 bytes, but the restarted process only received 35 bytes of the message. So the restarted process became stuck waiting for the last byte to arrive.
After many hours of digging, I figured out that the event engine was using the same file descriptor for its evsig_cb functionality (to signal itself when a signal arrives). So when the daemon wrote in to the new fd the event engine was stealing the first byte (*shakes fist at event engine*) before the recv() could be posted.
The solution is to use the event_reinit() function on restart to re-establish the now-stale file descriptors in the event engine. This seems to have fixed the problem.
A few other minor things:
-------------------------
* Add a check to make sure the event engine is balanced in its init/finalize
* Add the opal_event_base_close() to the BLCR restart exec function (still not 100% sure it is needed, but there it is).
This commit was SVN r24296.
last December. :-(
Add new MCA param: maffinity_libnuma_policy. Thanks to David
Singleton for the suggestion. Here's the help text about it:
{{{
MCA maffinity: parameter "maffinity_libnuma_policy" (current value:
<loose>, data source: default value)
Binding policy that determines what happens if memory
is unavailable on the local NUMA node. A value of
"strict" means that the memory allocation will fail;
a value of "loose" means that the memory allocation
will spill over to another NUMA node.
}}}
This commit was SVN r24290.
the module to use the new hwloc bitmap API (the cpuset API is both
klunkier and deprecated), which simplified a few things.
This commit was SVN r24217.
{{{
base/paffinity_base_service.c: In function ‘opal_paffinity_base_cset2mapstr’:
base/paffinity_base_service.c:623: warning: unused variable ‘range_last’
base/paffinity_base_service.c:623: warning: unused variable ‘range_first’
base/paffinity_base_service.c:622: warning: unused variable ‘count’
base/paffinity_base_service.c:622: warning: unused variable ‘m’
}}}
{{{
connect/btl_openib_connect_oob.c: In function ‘init_ud_qp’:
connect/btl_openib_connect_oob.c:1111: warning: control reaches end of non-void function
connect/btl_openib_connect_oob.c: In function ‘init_device’:
connect/btl_openib_connect_oob.c:1235: warning: unused variable ‘i’
connect/btl_openib_connect_oob.c: In function ‘get_pathrecord_sl’:
connect/btl_openib_connect_oob.c:1323: warning: unused variable ‘i’
}}}
This commit was SVN r24196.
1. Remove it from libevent207.h because it is not needed.
2. Add compat to the include list so it can use queue.h when needed.
This commit was SVN r24144.
Change OMPI code in libevent to not use bool.
Add some comments to indicate OMPI specific code.
This should fix compiles on Sun Studio Solaris.
This commit was SVN r24062.
libevent creates its event-config.h during "make all" (vs. during
configure). The prior method around this didn't work because it wrote
an event-config.h.in in the source tree -- a Bad Idea(tm). The new
way uses AC_CONFIG_COMMAND to get stuff executed at the end of
config.status to create event-config.h. This seems to work properly
during make distcheck.
This commit was SVN r23975.
Note: the ompi_check_libfca.m4 file had to be modified to avoid it stomping on global CPPFLAGS and the like. The file was also relocated to the ompi/config directory as it pertains solely to an ompi-layer component.
Forgive the mid-day configure change, but I know Shiqing is working the windows issues and don't want to cause him unnecessary redo work.
This commit was SVN r23966.
After talking with Brian, we're pretty sure that this is only because
really, really old libevent didn't allow bitwise or-ing of the other
loop types, because what we really need is (EVLOOP_ONCE |
EVLOOP_NONBLOCK). And that's what EVLOOP_ONELOOP did (i.e., we
changed the logic of libevent's event.c to let ONELOOP do both ONCE
and NONBLOCK things).
In the new libevent version, we didn't implement EVLOOP_ONELOOP
properly. As a result, and we got hangs in the SM BTL add_procs
function. Note that the SM BTL wasn't to blame -- it was purely a
side-effect of bad ONELOOP integration (i.e., if you got past the SM
BTL add_procs, you may well have hung somewhere else).
This commit removes all ONELOOP customizations from event.c and
returns it to (almost) its original state from the libevent 2.0.7-rc
distribution. Everwhere in the code base where we used ONELOOP, we
now use (ONCE | NONBLOCK).
This commit was SVN r23957.
Setup the event API to support multiple bases in preparation for splitting the OMPI and ORTE events. Holding here pending shared memory resolution.
This commit was SVN r23943.
