Having the "make_manpage.pl" script in the ompi/ tree broke
"./autogen.pl --no-ompi" (specifically: "make distcheck" of --no-ompi
builds would break).
(cherry picked from commit 89773c41)
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
gcc complains about ret possibly being used uninitialized. That will
never happen but we should still quiet the warning. This commit sets
ret to a valid value.
Fixes#5513
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
The aggregation code in osc/rdma is currently broken and will likely
not be reused. This commit cleans it out.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
- do not generate bindings for pompi_FOO_f symbols
(they are simply not used anywhere)
- move ompi_FOO_f bindings out of mpi_f08.mod into
ompi_mpifh_bindings.mod that is only used at build time
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
(cherry picked from commit open-mpi/ompi@c6070fd2e0)
We previously needed to have empty targets because AM couldn't handle
having an AM_CONDITIONAL was targets in the "if" statement but not in the
"else". :-(
That now appears as an old automake bug that has been fixed,
so cleanup some Makefile.am
Thanks Jeff for the pointer.
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
(cherry picked from commit open-mpi/ompi@6e04b2a66a)
We were assuming that the array_of_indices has the same size as the
number of requests (incount), instead of the numberr of actually
active requests. While the patch is trivial, the question of the
size of the array_of_indices should be clarified in the MPI Forum.
Signed-off-by: George Bosilca <bosilca@icl.utk.edu>
(cherry picked from commit a5fbfa476a591e747bec285552b57a216c44c027)
The parameter passed to NBC_Return_handle() was incorrectly casted
and not dereferenced.
Thanks Yossi for the bug report.
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
(cherry picked from commit open-mpi/ompi@8b51862fb2)
We need to return a persistent request.
`ompi_request_empty` is not a persistent request.
Signed-off-by: KAWASHIMA Takahiro <t-kawashima@jp.fujitsu.com>
(cherry picked from commit 69901a515697485cf56599e206dcfb74228e7ca2)
As agreed on #4574, where removed in past release branches
to avoid perfomance impacts in the default values for
some paramters.
Signed-off-by: Matias Cabral <matias.a.cabral@intel.com>
- added synonim to common ucx variables to allow
to print it in opal_info -a
Signed-off-by: Sergey Oblomov <sergeyo@mellanox.com>
(cherry picked from commit e00f7a68ba0b1012f954910e39b26f6075f3d006)
Since progress entries array is globally allocated, it is susceptible
to race conditions when using multi-threaded applications. Allocating it
on the stack resolves any potential races as it is thread local by default.
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@intel.com>
(cherry picked from commit ed2343034d09b33eb44a0a727bef97a108edc8aa)
file_delete triggers underneath the hood the full component selection
logic, since we do not have a file handle, just a file name.
As part of the selection logic, we have to however initiate the
framework-open of the fs component in case of ompio, since ompio
will call the delete function of the selected fs componentn, which
is based on the file system where the file is located.
This was not handled correctly so far. The problem however only
shows up if the first I/O operatin to be executed is a file_delete,
other wise the file_open will lead to the correct opening and initialization
of the fs framework. This commit ensures that we do the right thing
even if file_delete is the first file I/O operation in the application.
Fixes issue #5611
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
If an application opens a file for reading from multiple processes
using MPI_COMM_SELF (or another communicator that has distinct
process groups but the same comm-id, as can happen as the result
of comm_split), the naming chosen for the lockedfile or the mmapped
file used by the sharedfp/sm component would collide. This patch
ensures that the filename is different by integrating the process id
of rank 0 for each sub-communicator.
This fixes one aspect of the problem reported in github issue 5593
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
the sharedfp component has to be selected and opened before
we set the default file view during file_open. Otherwise
there is a sperious error message from the sharefp_file_seek
operation that is called during the file_set_view.
Fixes Issue #5560
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
This declaration was accidentally left behind in 89da9651bb2fe.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
(cherry picked from commit 8a0b5454ae26acc4984129e20ac152ca8e2214e5)
In the cleanup phase, it is possible for PtlMEUnlink() to return
PTL_IN_USE if the NIC is not done with the ME. This should not
be considered an error. This commit adds a retry loop around
PtlMEUnlink().
In some cases, the return value of PtlMEUnlink() and PtlCTFree()
was not checked at all. Check them with the same retry loop as
above.
Signed-off-by: Todd Kordenbrock <thkgcode@gmail.com>
(cherry picked from commit f3f2a826b40cc0d4a45a63614835162ec6eef78e)
-Updated blocking send to directly call functionality and
set completion events expected to 0 initally. This allows for optimization for
providers that support fi_tinject up to larger sizes. This also reduces
latency on running the OFI mtl with smaller sizes without requiring
calls to progress given fi_tinject is required to complete the messaging
before returning and will not create any events in the Completion Queue.
-Updated non-blocking send to directly call fi_tsend and avoid calling
fi_tinject as the functionality should not wait on completions. This
resolves a bug where applications calling MPI_Isend can overrun the
TX buffer with small (inject) messages causing a deadlock. In addition
this improves performance in message rates by preventing
waiting on any size message to complete in non-blocking send messages.
-Created common ompi_mtl_ofi_ssend_recv function to post the ssend recv
which is common between isend and send code paths.
Signed-off-by: Spruit, Neil R <neil.r.spruit@intel.com>
(cherry picked from commit 7dc8c8ba3fa630df8c5c7ab36fcf25249a82bfe7)
When romio314 was first pulled in an extra patch was applied to it, see commit
92f6c7c1e210c559471a05aaac9b19e0bd3d71bb. Most of that patch is already present
in vanilla romio321, but the fix for MPIO_DATATYPE_ISCOMMITTED() isn't.
If that macro doesn't set err_ then some paths end up with a variable being used
uninitialized. In particular you can trace through romio321/romio/mpi-io/read.c
to see what happens with error_code. It's an uninitialized stack variable that goes
through three MPIO_CHECK_* macros none of which set it. The macros consistently set
error_code to a failure if they see something wrong, but they don't consistently
set it to success when things are fine.
And then in the last macro MPIO_CHECK_DATATYPE it tries to look at the value
of error_code that was never set.
Signed-off-by: Mark Allen <markalle@us.ibm.com>
(cherry picked from commit f413ef6b142fc3498bdb575d270f9afd0a840863)
- If a message for a recv that is being cancelled gets completed after
the call to fi_cancel, then the OFI mtl will enter a deadlock state
waiting for ofi_req->super.ompi_req->req_status._cancelled which will
never happen since the recv was successfully finished.
- To resolve this issue, the OFI mtl now checks ofi_req->req_started
to see if the request has been started within the loop waiting for the
event to be cancelled. If the request is being completed, then the loop
is broken and fi_cancel exits setting
ofi_req->super.ompi_req->req_status._cancelled = false;
Signed-off-by: Spruit, Neil R <neil.r.spruit@intel.com>
(cherry picked from commit 767135c580f75d3dde9cb9c88601dd18afda949a)
