Application Level Placement Scheduler (ALPS).
This commit was tested under two Cray machines at ORNL: Jaguar (Catamount)
and Rizzo (CNL Test cage). Both machines performed as they should across
the commit.
It is likely that mor changes will follow this the work and environment
stabilizes.
Most of the infrastructure works the same for Catamount and CNL
except for a few bits. Below are the highlights:
Default IFACE Change:
On Catamount we can use PTL_IFACE_DEFAULT, but on the CNL system we have access
to will fail on this interface, and should be set to:
IFACE_FROM_BRIDGE_AND_NALID(PTL_BRIDGE_UK,PTL_IFACE_SS).
So if we detect that we are running with YOD then use the former interface
and if we detect that we are running with ALPS then use the latter.
We will want to pursue a more elegant solution if this interface continues to
change across machines.
PtlGetId and cnos_register_ptlid:
The header suggests that these should never be called when launching with YOD.
But in the ALPS environment the cnos_barrier() will hang forever if these
functions are not called after PtlNIInit(). Since these functions only need to
be called once, and the orte rmgr/cnos component is loaded before the ompi
common/portals componet then just call these functions once in the rmgr/cnos
component.
cnos_barrier_init():
This is a noop for YOD, but critical for ALPS. So be sure to call it before
calling the first barrier in the rmgr/cnos component.
cnos_barrier vs cnos_pm_barrier:
It is suggested the cnos_pm_barrier only be used during finalization
as it will indicate to the launcher (yod or aprun) that the app is about
to complete. It was suggested that we use the regular cnos_barrier() instead.
I want to look into this a bit more to make sure there are not adverse
side effects. A note has been placed in the code to indicate this reasoning.
This commit was SVN r15756.
* General TCP cleanup for OPAL / ORTE
* Simplifying the OOB by moving much of the logic into the RML
* Allowing the OOB RML component to do routing of messages
* Adding a component framework for handling routing tables
* Moving the xcast functionality from the OOB base to its own framework
Includes merge from tmp/bwb-oob-rml-merge revisions:
r15506, r15507, r15508, r15510, r15511, r15512, r15513
This commit was SVN r15528.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r15506
r15507
r15508
r15510
r15511
r15512
r15513
Cleanup ALL instances of output involving the printing of orte_process_name_t structures using the ORTE_NAME_ARGS macro so that the number of fields and type of data match. Replace those values with a new macro/function pair ORTE_NAME_PRINT that outputs a string (using the new thread safe data capability) so that any future changes to the printing of those structures can be accomplished with a change to a single point.
Note that I could not possibly find outputs that directly print the orte_process_name_t fields, but only dealt with those that used ORTE_NAME_ARGS. Hence, you may still have a few outputs that bark during compilation. Also, I could only verify those that fall within environments I can compile on, so other environments may yield some minor warnings.
This commit was SVN r15517.
Short description: major changes include -
1. singletons now fork/exec a local daemon to manage their operations.
2. the orte daemon code now resides in libopen-rte
3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided.
I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine.
This commit was SVN r15390.
1. generalize orte_rml.xcast to become a general broadcast-like messaging system. Messages can now be sent to any tag on the daemons or processes. Note that any message sent via xcast will be delivered to ALL processes in the specified job - you don't get to pick and choose. At a later date, we will introduce an augmented capability that will use the daemons as relays, but will allow you to send to a specified array of process names.
2. extended orte_rml.xcast so it supports more scalable message routing methodologies. At the moment, we support three: (a) direct, which sends the message directly to all recipients; (b) linear, which sends the message to the local daemon on each node, which then relays it to its own local procs; and (b) binomial, which sends the message via a binomial algo across all the daemons, each of which then relays to its own local procs. The crossover points between the algos are adjustable via MCA param, or you can simply demand that a specific algo be used.
3. orteds no longer exhibit two types of behavior: bootproxy or VM. Orteds now always behave like they are part of a virtual machine - they simply launch a job if mpirun tells them to do so. This is another step towards creating an "orteboot" functionality, but also provided a clean system for supporting message relaying.
Note one major impact of this commit: multiple daemons on a node cannot be supported any longer! Only a single daemon/node is now allowed.
This commit is known to break support for the following environments: POE, Xgrid, Xcpu, Windows. It has been tested on rsh, SLURM, and Bproc. Modifications for TM support have been made but could not be verified due to machine problems at LANL. Modifications for SGE have been made but could not be verified. The developers for the non-verified environments will be separately notified along with suggestions on how to fix the problems.
This commit was SVN r15007.
A bunch of fixes from the /tmp/iof-fixes branch that fix up ''some''
(but not ''all'') of the problems that we have seen with iof:
* Reading very large files via stdin redirected to orteun (Sun saw
this)
* Reading a little bit of a large file redirected to orterun's stdin
and then either closing stdin or exiting the process
The Big Change was to make the proxy iof (the one running in non-HNP
orteds) send back a "I'm closing the stream" ACK back to the service
iof. This tells the HNP that there will be nothing more coming from
that peer, and therefore the iof forward should be removed.
Many other minor cleanups/fixes, terminology changes, and
documentation additions are included in this commit as well. However,
there are still some pretty big outstanding issues with IOF that are
not addressed either by #967 or this commit. A few examples:
* IOF was designed to allow multiple subscribers to a single stream.
We're not entirely sure that this works (for one thing, there is
nothing in the ORTE/OMPI code base that uses this functionality).
* There are also resources leaked when processes/jobs exit (per
Ralph's first comment on this ticket).
* There is no feedback to close orterun's stdin when all subscribers
to the corresponding stream have closed stdin.
This commit was SVN r14967.
The following Trac tickets were found above:
Ticket 967 --> https://svn.open-mpi.org/trac/ompi/ticket/967
symbols in them and environ is defined only in the final application
(probably in crt1.o). Apple provides a function for getting at the
environment, so use that instead if it's available.
This commit was SVN r14857.
The primary change that underlies all this is in the OOB. Specifically, the problem in the code until now has been that the OOB attempts to resolve an address when we call the "send" to an unknown recipient. The OOB would then wait forever if that recipient never actually started (and hence, never reported back its OOB contact info). In the case of an orted that failed to start, we would correctly detect that the orted hadn't started, but then we would attempt to order all orteds (including the one that failed to start) to die. This would cause the OOB to "hang" the system.
Unfortunately, revising how the OOB resolves addresses introduced a number of additional problems. Specifically, and most troublesome, was the fact that comm_spawn involved the immediate transmission of the rendezvous point from parent-to-child after the child was spawned. The current code used the OOB address resolution as a "barrier" - basically, the parent would attempt to send the info to the child, and then "hold" there until the child's contact info had arrived (meaning the child had started) and the send could be completed.
Note that this also caused comm_spawn to "hang" the entire system if the child never started... The app-failed-to-start helped improve that behavior - this code provides additional relief.
With this change, the OOB will return an ADDRESSEE_UNKNOWN error if you attempt to send to a recipient whose contact info isn't already in the OOB's hash tables. To resolve comm_spawn issues, we also now force the cross-sharing of connection info between parent and child jobs during spawn.
Finally, to aid in setting triggers to the right values, we introduce the "arith" API for the GPR. This function allows you to atomically change the value in a registry location (either divide, multiply, add, or subtract) by the provided operand. It is equivalent to first fetching the value using a "get", then modifying it, and then putting the result back into the registry via a "put".
This commit was SVN r14711.
This completes the minor changes required to the PLS components. Basically, there is a small change required to the parameter list of the orted cmd functions. I caught and did it for xcpu and poe, in addition to the components listed in my email - so I think that only leaves xgrid unconverted.
The orted fail-to-start mods will also make changes in the PLS components, but those can be localized so they come in one at a time.
This commit was SVN r14499.
There is a binomial algorithm in the code (i.e., the HNP would send to a subset of the orteds, which then relay it on according to the typical log-2 algo), but that has a bug in it so the code won't let you select it even if you tried (and the mca param doesn't show, so you'd *really* have to try).
This also involved a slight change to the oob.xcast API, so propagated that as required.
Note: this has *only* been tested on rsh, SLURM, and Bproc environments (now that it has been transferred to the OMPI trunk, I'll need to re-test it [only done rsh so far]). It should work fine on any environment that uses the ORTE daemons - anywhere else, you are on your own... :-)
Also, correct a mistake where the orte_debug_flag was declared an int, but the mca param was set as a bool. Move the storage for that flag to the orte/runtime/params.c and orte/runtime/params.h files appropriately.
This commit was SVN r14475.
Per discussions with Brian and Ralph, make a slight correction in
where components are installed. Use $pkglibdir, not $libdir/openmpi,
so that when compiled in the orte trunk, components are installed to
the right directory (because the component search patch is checking
$pkglibdir).
This commit was SVN r14345.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r14289
This merge adds Checkpoint/Restart support to Open MPI. The initial
frameworks and components support a LAM/MPI-like implementation.
This commit follows the risk assessment presented to the Open MPI core
development group on Feb. 22, 2007.
This commit closes trac:158
More details to follow.
This commit was SVN r14051.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r13912
The following Trac tickets were found above:
Ticket 158 --> https://svn.open-mpi.org/trac/ompi/ticket/158
components that use configure.m4 for configuration or are always built.
The macro has not been needed since moving to configure types other than
configure.stub
Fixes trac:590
This commit was SVN r13031.
The following Trac tickets were found above:
Ticket 590 --> https://svn.open-mpi.org/trac/ompi/ticket/590
Add placeholders for the new orte tools. These don't actually do anything yet - in fact, I have set the .ompi_ignore so that you won't compile them (I have set a .ompi_unignore for me). Please let me know if you encounter any trouble with this - the ompi_ignore's should protect everyone.
This commit was SVN r12616.
Accordingly, there are new APIs to the name service to support the ability to get a job's parent, root, immediate children, and all its descendants. In addition, the terminate_job, terminate_orted, and signal_job APIs for the PLS have been modified to accept attributes that define the extent of their actions. For example, doing a "terminate_job" with an attribute of ORTE_NS_INCLUDE_DESCENDANTS will terminate the given jobid AND all jobs that descended from it.
I have tested this capability on a MacBook under rsh, Odin under SLURM, and LANL's Flash (bproc). It worked successfully on non-MPI jobs (both simple and including a spawn), and MPI jobs (again, both simple and with a spawn).
This commit was SVN r12597.
Add some debugging output to the ODLS default module, and the orted.
Remove the nodename data from the ODLS info report - that info is already stored in the registry by the RMAPS framework upon completing the mapping procedure.
Add another test program that does an ORTE-only dynamic spawn (gasp!). Looks just like comm_spawn - just no MPI involved.
Modify the ODLS to release the processor when we "kill" local procs in a more scalable fashion. It previously had a sleep in it that Jeff's prior commit removed. However, he introduced some Windows code into the non-Windows component (protected by "if"s, but unnecessary). This is a more general solution he proposed - included here so I could get things to compile properly.
This commit was SVN r12579.
1. ORTE_RMAPS_DISPLAY_AT_LAUNCH: pretty-prints out the process map right before we launch so you can see where everyone is going. This is settable via the command line option "--display-map-at-launch"
2. ORTE_RMGR_STOP_AFTER_SETUP: just setup the job and then return from the spawn command.
3. ORTE_RMGR_STOP_AFTER_ALLOC: return from the rmgr.spawn call after allocating the job
4. ORTE_RMGR_STOP_AFTER_MAP: return from the rmgr.spawn call after mapping the job. This gives folks a chance to retrieve and graphically display the map, let the user edit it, and store the results. They can then call "launch" on their own and the system will use the revised map.
Enjoy! My personal favorite is the first one - helps with debugging.
This commit was SVN r12379.
If you want to look at our launch and MPI process startup times, you can do so with two MCA params:
OMPI_MCA_orte_timing: set it to anything non-zero and you will get the launch time for different steps in the job launch procedure. The degree of detail depends on the launch environment. rsh will provide you with the average, min, and max launch time for the daemons. SLURM block launches the daemon, so you only get the time to launch the daemons and the total time to launch the job. Ditto for bproc. TM looks more like rsh. Only those four environments are currently supported - anyone interested in extending this capability to other environs is welcome to do so. In all cases, you also get the time to setup the job for launch.
OMPI_MCA_ompi_timing: set it to anything non-zero and you will get the time for mpi_init to reach the compound registry command, the time to execute that command, the time to go from our stage1 barrier to the stage2 barrier, and the time to go from the stage2 barrier to the end of mpi_init. This will be output for each process, so you'll have to compile any statistics on your own. Note: if someone develops a nice parser to do so, it would be really appreciated if you could/would share!
This commit was SVN r12302.
Get the ordering right so that a singleton can start.
Protect the rmgr copy app_context function from NULL fields
Tell the mapper it is okay for there not to be a pre-existing mapping plan for a parent when dynamically spawning processes
This commit was SVN r12257.
This patch will cause a problem for cnos, however, as there we want to specifically tell the backends to be "null". I'm working on that issue.
This commit was SVN r12225.
Modify the mapper to better bookmark its stopping place each time, and to pick up the next time from there. This needs to be validated on a multi-node system.
Fix a major memory corruption problem in the registry put/get functions that was doing multiple free's. Not sure how valgrind missed this one, though it only occurred in specific circumstances (such as comm_spawn).
This commit was SVN r12179.
