This conservative fixes tries to fetch info from both
opal_dstore_nonpeer and opal_dstore_peer.
This is required is task A spawns tasks B and C.
B was previously unable to find info from C, this caused locality
info not being set and a hang in coll/ml init.
no CMR is required since v1.8 uses a unique dstore
This commit was SVN r31923.
http://www.open-mpi.org/community/lists/devel/2014/04/14496.php
Revamp the opal database framework, including renaming it to "dstore" to reflect that it isn't a "database". Move the "db" framework to ORTE for now, soon to move to ORCM
This commit was SVN r31557.
This provides full locality - i.e., not just node-level, but all the way down to whatever common binding level exists between the procs.
cmr=v1.7.5:reviewer=jsquyres
This commit was SVN r31106.
NOTE: I transferred the oshmem-disabled-by-default from the 1.7 branch to the trunk to minimize future disruption if/when we change that option.
cmr=v1.8:reviewer=jsquyres
This commit was SVN r31006.
* automatically retrieve the hostname (and all RTE info) for all procs during MPI_Init if nprocs < cutoff
* if nprocs > cutoff, retrieve the hostname (and all RTE info) for a proc upon the first call to modex_recv for that proc. This would provide the hostname for debugging purposes as we only report errors on messages, and so we must have called modex_recv to get the endpoint info
* BTLs are not to call modex_recv until they need the endpoint info for first message - i.e., not during add_procs so we don't call it for every process in the job, but only those with whom we communicate
My understanding is that only some BTLs have been modified to meet that third requirement, but those include the Cray ones where jobs are big enough that launch times were becoming an issue. Other BTLs would hopefully be modified as time went on and interest in using them at scale arose. Meantime, those BTLs would call modex_recv on every proc, and we would therefore be no worse than the prior behavior.
This commit revises the MPI-RTE interface to pass the ompi_proc_t instead of the ompi_process_name_t for the proc so that the hostname can be easily inserted. I have advised the ORNL folks of the change.
cmr=v1.7.4:reviewer=jsquyres:subject=Fix thread deadlock
This commit was SVN r29931.
The following SVN revision numbers were found above:
r29917 --> open-mpi/ompi@1a972e2c9d
This change contains a non-mandatory modification
of the MPI-RTE interface. Anyone wishing to support
coprocessors such as the Xeon Phi may wish to add
the required definition and underlying support
****************************************************************
Add locality support for coprocessors such as the Intel Xeon Phi.
Detecting that we are on a coprocessor inside of a host node isn't straightforward. There are no good "hooks" provided for programmatically detecting that "we are on a coprocessor running its own OS", and the ORTE daemon just thinks it is on another node. However, in order to properly use the Phi's public interface for MPI transport, it is necessary that the daemon detect that it is colocated with procs on the host.
So we have to split the locality to separately record "on the same host" vs "on the same board". We already have the board-level locality flag, but not quite enough flexibility to handle this use-case. Thus, do the following:
1. add OPAL_PROC_ON_HOST flag to indicate we share a host, but not necessarily the same board
2. modify OPAL_PROC_ON_NODE to indicate we share both a host AND the same board. Note that we have to modify the OPAL_PROC_ON_LOCAL_NODE macro to explicitly check both conditions
3. add support in opal/mca/hwloc/base/hwloc_base_util.c for the host to check for coprocessors, and for daemons to check to see if they are on a coprocessor. The former is done via hwloc, but support for the latter is not yet provided by hwloc. So the code for detecting we are on a coprocessor currently is Xeon Phi specific - hopefully, we will find more generic methods in the future.
4. modify the orted and the hnp startup so they check for coprocessors and to see if they are on a coprocessor, and have the orteds pass that info back in their callback message. Automatically detect that coprocessors have been found and identify which coprocessors are on which hosts. Note that this algo isn't scalable at the moment - this will hopefully be improved over time.
5. modify the ompi proc locality detection function to look for coprocessor host info IF the OMPI_RTE_HOST_ID database key has been defined. RTE's that choose not to provide this support do not have to do anything - the associated code will simply be ignored.
6. include some cleanup of the hwloc open/close code so it conforms to how we did things in other frameworks (e.g., having a single "frame" file instead of open/close). Also, fix the locality flags - e.g., being on the same node means you must also be on the same cluster/cu, so ensure those flags are also set.
cmr:v1.7.4:reviewer=hjelmn
This commit was SVN r29435.
Create a new required key in the OMPI layer for retrieving a "node id" from the database. ALL RTE'S MUST DEFINE THIS KEY. This allows us to compute locality in the MPI layer, which is necessary when we do things like intercomm_create.
cmr:v1.7.4:reviewer=rhc:subject=Cleanup handling of modex data
This commit was SVN r29274.
configure-time dynamic allocation of flags. The net result for platforms
which only support BTL-based communication is a reduction of 8*nprocs bytes
per process. Platforms which support both MTLs and BTLs will not see
a space reduction, but will now be able to safely run both the MTL and BTL
side-by-side, which will prove useful.
This commit was SVN r29100.
So shift the cutoff param to the MPI layer, and have it solely determine whether or not we call modex_recv on the hostname. If comm_world is of size greater than the cutoff, then we don't automatically retrieve the hostname when we build the ompi_proc_t for a process - instead, we fill the hostname entry on first call to modex_recv for that process.
The param is now "ompi_hostname_cutoff=N", where N=number of procs for cutoff.
Refs trac:3729
This commit was SVN r29056.
The following Trac tickets were found above:
Ticket 3729 --> https://svn.open-mpi.org/trac/ompi/ticket/3729
* add a new MCA param orte_hostname_cutoff to specify the number of nodes at which we stop including hostnames. This defaults to INT_MAX => always include hostnames. If a value is given, then we will include hostnames for any allocation smaller than the given limit.
* remove ompi_proc_get_hostname. Replace all occurrences with a direct link to ompi_proc_t's proc_hostname, protected by appropriate "if NULL"
* modify the OMPI-ORTE integration component so that any call to modex_recv automatically loads the ompi_proc_t->proc_hostname field as well as returning the requested info. Thus, any process whose modex info you retrieve will automatically receive the hostname. Note that on-demand retrieval is still enabled - i.e., if we are running under direct launch with PMI, the hostname will be fetched upon first call to modex_recv, and then the ompi_proc_t->proc_hostname field will be loaded
* removed a stale MCA param "mpi_keep_peer_hostnames" that was no longer used anywhere in the code base
* added an envar lookup in ess/pmi for the number of nodes in the allocation. Sadly, PMI itself doesn't provide that info, so we have to get it a different way. Currently, we support PBS-based systems and SLURM - for any other, rank0 will emit a warning and we assume max number of daemons so we will always retain hostnames
This commit was SVN r29052.
This creates a really bad scaling behavior. Users have found a nearly 20% launch time differential between mpirun and PMI, with PMI being the slower method. Some of the problem is attributable to poor exchange algorithms in RM's like Slurm and Alps, but we make things worse by calling "get" so many times.
Nathan (with a tad advice from me) has attempted to alleviate this problem by reducing the number of "get" calls. This required the following changes:
* upon first request for data, have the OPAL db pmi component fetch and decode *all* the info from a given remote proc. It turned out we weren't caching the info, so we would continually request it and only decode the piece we needed for the immediate request. We now decode all the info and push it into the db hash component for local storage - and then all subsequent retrievals are fulfilled locally
* reduced the amount of data by eliminating the exchange of the OMPI_ARCH value if heterogeneity is not enabled. This was used solely as a check so we would error out if the system wasn't actually homogeneous, which was fine when we thought there was no cost in doing the check. Unfortunately, at large scale and with direct launch, there is a non-zero cost of making this test. We are open to finding a compromise (perhaps turning the test off if requested?), if people feel strongly about performing the test
* reduced the amount of RTE data being automatically fetched, and fetched the rest only upon request. In particular, we no longer immediately fetch the hostname (which is only used for error reporting), but instead get it when needed. Likewise for the RML uri as that info is only required for some (not all) environments. In addition, we no longer fetch the locality unless required, relying instead on the PMI clique info to tell us who is on our local node (if additional info is required, the fetch is performed when a modex_recv is issued).
Again, all this only impacts direct launch - all the info is provided when launched via mpirun as there is no added cost to getting it
Barring objections, we may move this (plus any required other pieces) to the 1.7 branch once it soaks for an appropriate time.
This commit was SVN r29040.
ompi_show_help, because opal_show_help is replaced with an
aggregating version when using ORTE, so there's no reason to
directly call orte_show_help.
This commit was SVN r28051.
Update all the orte ess components to remove their associated APIs for retrieving proc data. Update the grpcomm API to reflect transfer of set/get modex info to the db framework.
Note that this doesn't recreate the old GPR. This is strictly a local db storage that may (at some point) obtain any missing data from the local daemon as part of an async methodology. The framework allows us to experiment with such methods without perturbing the default one.
This commit was SVN r26678.
* Remove paffinity, maffinity, and carto frameworks -- they've been
wholly replaced by hwloc.
* Move ompi_mpi_init() affinity-setting/checking code down to ORTE.
* Update sm, smcuda, wv, and openib components to no longer use carto.
Instead, use hwloc data. There are still optimizations possible in
the sm/smcuda BTLs (i.e., making multiple mpools). Also, the old
carto-based code found out how many NUMA nodes were ''available''
-- not how many were used ''in this job''. The new hwloc-using
code computes the same value -- it was not updated to calculate how
many NUMA nodes are used ''by this job.''
* Note that I cannot compile the smcuda and wv BTLs -- I ''think''
they're right, but they need to be verified by their owners.
* The openib component now does a bunch of stuff to figure out where
"near" OpenFabrics devices are. '''THIS IS A CHANGE IN DEFAULT
BEHAVIOR!!''' and still needs to be verified by OpenFabrics vendors
(I do not have a NUMA machine with an OpenFabrics device that is a
non-uniform distance from multiple different NUMA nodes).
* Completely rewrite the OMPI_Affinity_str() routine from the
"affinity" mpiext extension. This extension now understands
hyperthreads; the output format of it has changed a bit to reflect
this new information.
* Bunches of minor changes around the code base to update names/types
from maffinity/paffinity-based names to hwloc-based names.
* Add some helper functions into the hwloc base, mainly having to do
with the fact that we have the hwloc data reporting ''all''
topology information, but sometimes you really only want the
(online | available) data.
This commit was SVN r26391.
Roll in the ORTE state machine. Remove last traces of opal_sos. Remove UTK epoch code.
Please see the various emails about the state machine change for details. I'll send something out later with more info on the new arch.
This commit was SVN r26242.
Use hwloc to obtain the cpuset for each process during mpi_init, and share that info in the modex. As it arrives, use a new opal_hwloc_base utility function to parse the value against the local proc's cpuset and determine where they overlap. Cache the value in the pmap object as it may be referenced multiple times.
Thus, the return value from orte_ess.proc_get_locality is a 16-bit bitmask that describes the resources being shared with you. This bitmask can be tested using the macros in opal/mca/paffinity/paffinity.h
Locality is available for all procs, whether launched via mpirun or directly with an external launcher such as slurm or aprun.
This commit was SVN r25331.
To enable the epochs and the resilient orte code, use the configure flag:
--enable-resilient-orte
This will define both:
ORTE_ENABLE_EPOCH
ORTE_RESIL_ORTE
This commit was SVN r25093.
(OMPI_ERR_* = OPAL_SOS_GET_ERR_CODE(ret)), since the return value could be a
SOS-encoded error. The OPAL_SOS_GET_ERR_CODE() takes in a SOS error and returns
back the native error code.
* Since OPAL_SUCCESS is preserved by SOS, also change all calls of the form
(OPAL_ERROR == ret) to (OPAL_SUCCESS != ret). We thus avoid having to
decode 'ret' to get the native error code.
This commit was SVN r23162.
* Don't build the pstat component if all defines needed aren't there.
* Update platform file to work better
* Work around two places that depended on modex being operational
This commit was SVN r22536.
Remove all architecture references from ORTE and put them back in the modex using modex_send/recv calls.
Hetero operations are now fully supported again. Comm_spawn now works up to the point where it segfaults due to an error in the CID code - which now allows Edgar to dig further! :-)
This commit was SVN r21655.
OMPI
and a language agnostic part in OPAL. The convertor is completely
moved into OPAL. This offers several benefits as described in RFC
http://www.open-mpi.org/community/lists/devel/2009/07/6387.php
namely:
- Fewer basic types (int* and float* types, boolean and wchar
- Fixing naming scheme to ompi-nomenclature.
- Usability outside of the ompi-layer.
- Due to the fixed nature of simple opal types, their information is
completely
known at compile time and therefore constified
- With fewer datatypes (22), the actual sizes of bit-field types may be
reduced
from 64 to 32 bits, allowing reorganizing the opal_datatype
structure, eliminating holes and keeping data required in convertor
(upon send/recv) in one cacheline...
This has implications to the convertor-datastructure and other parts
of the code.
- Several performance tests have been run, the netpipe latency does not
change with
this patch on Linux/x86-64 on the smoky cluster.
- Extensive tests have been done to verify correctness (no new
regressions) using:
1. mpi_test_suite on linux/x86-64 using clean ompi-trunk and
ompi-ddt:
a. running both trunk and ompi-ddt resulted in no differences
(except for MPI_SHORT_INT and MPI_TYPE_MIX_LB_UB do now run
correctly).
b. with --enable-memchecker and running under valgrind (one buglet
when run with static found in test-suite, commited)
2. ibm testsuite on linux/x86-64 using clean ompi-trunk and ompi-ddt:
all passed (except for the dynamic/ tests failed!! as trunk/MTT)
3. compilation and usage of HDF5 tests on Jaguar using PGI and
PathScale compilers.
4. compilation and usage on Scicortex.
- Please note, that for the heterogeneous case, (-m32 compiled
binaries/ompi), neither
ompi-trunk, nor ompi-ddt branch would successfully launch.
This commit was SVN r21641.
OMPI_* to OPAL_*. This allows opal layer to be used more independent
from the whole of ompi.
NOTE: 9 "svn mv" operations immediately follow this commit.
This commit was SVN r21180.
- Delete unnecessary header files using
contrib/check_unnecessary_headers.sh after applying
patches, that include headers, being "lost" due to
inclusion in one of the now deleted headers...
In total 817 files are touched.
In ompi/mpi/c/ header files are moved up into the actual c-file,
where necessary (these are the only additional #include),
otherwise it is only deletions of #include (apart from the above
additions required due to notifier...)
- To get different MCAs (OpenIB, TM, ALPS), an earlier version was
successfully compiled (yesterday) on:
Linux locally using intel-11, gcc-4.3.2 and gcc-SVN + warnings enabled
Smoky cluster (x86-64 running Linux) using PGI-8.0.2 + warnings enabled
Lens cluster (x86-64 running Linux) using Pathscale-3.2 + warnings enabled
This commit was SVN r21096.
In case we use memcmp, strlen, strup and friends include <string.h>
Also several constants.h are not included directly
- Let's have mca_topo_base_cart_create return ompi-errors in
ompi/mca/topo/base/topo_base_cart_create.c
This commit was SVN r20773.
