The PMIx support for "instant on" remains experimental, so disable it by default. Provide an MCA param and corresponding command line option to enable it at runtime.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Since output-filename has been moved to a per-job attribute,
remove the orte_output_filename global variable, and stop passing
this option to orted.
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
passed to make it all flow thru the opal/pmix "put/get" operations. Update the PMIx code to latest master to pickup some required behaviors.
Remove the no-longer-required get_contact_info and set_contact_info from the RML layer.
Add an MCA param to allow the ofi/rml component to route messages if desired. This is mainly for experimentation at this point as we aren't sure if routing wi
ll be beneficial at large scales. Leave it "off" by default.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Cleanup the way we look for matching OFI addresses by using the opal_net_samenetwork helper function. This now works for multi-network environments, but only using the socket provider
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
onto the backend daemons. By default, let mpirun only pack the app_context
info and send that to the backend daemons where the mapping will
be done. This significantly reduces the computational time on mpirun as it isn't
running up/down the topology tree computing thousands of binding
locations, and it reduces the launch message to a very small number of
bytes.
When running -novm, fall back to the old way of doing things
where mpirun computes the entire map and binding, and then sends
the full info to the backend daemon.
Add a new cmd line option/mca param --fwd-mpirun-port that allows
mpirun to dynamically select a port, but then passes that back to
all the other daemons so they will use that port as a static port
for their own wireup. In this mode, we no longer "phone home" directly
to mpirun, but instead use the static port to wireup at daemon
start. We then use the routing tree to rollup the initial
launch report, and limit the number of open sockets on mpirun's node.
Update ras simulator to track the new nidmap code
Cleanup some bugs in the nidmap regex code, and enhance the error message for not enough slots to include the host on which the problem is found.
Update gadget platform file
Initialize the range count when starting a new range
Fix the no-np case in managed allocation
Ensure DVM node usage gets cleaned up after each job
Update scaling.pl script to use --fwd-mpirun-port. Pre-connect the daemon to its parent during launch while we are otherwise waiting for the daemon's children to send their "phone home" rollup messages
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
* MCA option to control how long we wait for stack traces:
- orte_timeout_for_stack_trace INTEGER
Default: 30
Setting to <= 0 will cause it to wait forever
* Useful when gathering stack traces from large jobs which might take
a long time.
Signed-off-by: Joshua Hursey <jhursey@us.ibm.com>
* Similar to `orte_map_stddiag_to_stderr` except it redirects `stddiag`
to `stdout` instead of `stderr`.
* Add protection so that the user canot supply both:
- `orte_map_stddiag_to_stderr`
- `orte_map_stddiag_to_stdout`
Signed-off-by: Joshua Hursey <jhursey@us.ibm.com>
Cleanup a typo, and remove no longer needed MCA params for hetero nodes and hetero apps. Hetero nodes will always be automatically detected. We don't support a mix of 32 and 64 bit apps
Modify the orte_node_t to use orte_topology_t instead of hwloc_topology_t, updating all the places that use it. Ensure that we properly update topology when we see a different one on a compute node.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Revamp the event notification integration to rely on the PMIx event chaining and remove the duplicate chaining in OPAL. This ensures we get system-level events that target non-default handlers.
Restore the hostname entries for MPI-level error messages, but provide an MCA param (orte_hostname_cutoff) to remove them for large clusters where the memory footprint is problematic. Set the default at 1000 nodes in the job (not the allocation).
Begin first cut at memory profiler
Some minor cleanups of memprobe
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Still not completely done as we need a better way of tracking the routed module being used down in the OOB - e.g., when a peer drops connection, we want to remove that route from all conduits that (a) use the OOB and (b) are routed, but we don't want to remove it from an OFI conduit.
Note that this cannot be used for MPI performance testing. It is really only useful for ORTE scaling tests. It also only works with the rsh/ssh launcher.
Replace our old, clunky timing setup with a much nicer one that is only available if configured with --enable-timing. Add a tool for profiling clock differences between the nodes so you can get more precise timing measurements. I'll ask Artem to update the Github wiki with full instructions on how to use this setup.
This commit was SVN r32738.
WHAT: Merge the PMIx branch into the devel repo, creating a new
OPAL “lmix” framework to abstract PMI support for all RTEs.
Replace the ORTE daemon-level collectives with a new PMIx
server and update the ORTE grpcomm framework to support
server-to-server collectives
WHY: We’ve had problems dealing with variations in PMI implementations,
and need to extend the existing PMI definitions to meet exascale
requirements.
WHEN: Mon, Aug 25
WHERE: https://github.com/rhc54/ompi-svn-mirror.git
Several community members have been working on a refactoring of the current PMI support within OMPI. Although the APIs are common, Slurm and Cray implement a different range of capabilities, and package them differently. For example, Cray provides an integrated PMI-1/2 library, while Slurm separates the two and requires the user to specify the one to be used at runtime. In addition, several bugs in the Slurm implementations have caused problems requiring extra coding.
All this has led to a slew of #if’s in the PMI code and bugs when the corner-case logic for one implementation accidentally traps the other. Extending this support to other implementations would have increased this complexity to an unacceptable level.
Accordingly, we have:
* created a new OPAL “pmix” framework to abstract the PMI support, with separate components for Cray, Slurm PMI-1, and Slurm PMI-2 implementations.
* Replaced the current ORTE grpcomm daemon-based collective operation with an integrated PMIx server, and updated the grpcomm APIs to provide more flexible, multi-algorithm support for collective operations. At this time, only the xcast and allgather operations are supported.
* Replaced the current global collective id with a signature based on the names of the participating procs. The allows an unlimited number of collectives to be executed by any group of processes, subject to the requirement that only one collective can be active at a time for a unique combination of procs. Note that a proc can be involved in any number of simultaneous collectives - it is the specific combination of procs that is subject to the constraint
* removed the prior OMPI/OPAL modex code
* added new macros for executing modex send/recv to simplify use of the new APIs. The send macros allow the caller to specify whether or not the BTL supports async modex operations - if so, then the non-blocking “fence” operation is used, if the active PMIx component supports it. Otherwise, the default is a full blocking modex exchange as we currently perform.
* retained the current flag that directs us to use a blocking fence operation, but only to retrieve data upon demand
This commit was SVN r32570.
mca_base_var_register (..., MCA_BASE_VAR_TYPE_STRING, ...)
will dup() the orte_set_slots string, so there is no need
to do this in the first place.
cmr=v1.8.2:reviewer=rhc
This commit was SVN r31773.
The problem arises when a hostfile is used, and the user provides host names without specifying the slots= paramater. In these cases, we assign slots=1, but automatically allow oversubscription since that number isn't confirmed. We then provide a separate parameter by which the user can direct that we assign the number of slots based on the sensed hardware - e.g., by telling us to set the #slots equal to the #cores on each node. However, this has been set to "off" by default.
In order to make this a little less complex for the user, set the default such that we automatically set #slots equal to #cores (or #hwt's if use_hwthreads_as_cpus has been set) only for those cases where the user provides names in a hostfile but does not provide slot information.
Also cleanup some a couple of issues in the mapping/binding system:
* ensure we only override the binding directive if we are oversubscribed *and* overload is not allowed
* ensure that the MPI procs don't attempt to bind themselves if they are launched by an orted as any binding directive (no matter what it was) would have been serviced by the orted on launch
* minor cleanup to the warning message when oversubscribed and binding was requested
cmr=v1.7.5:reviewer=rhc:subject=update mapping/binding system
This commit was SVN r30909.
Resolves problems in loop_spawn where the timer was incorrectly firing and killing the overall job.
cmr=v1.7.4:reviewer=hjelmn
This commit was SVN r29661.
*** THIS RFC INCLUDES A MINOR CHANGE TO THE MPI-RTE INTERFACE ***
Note: during the course of this work, it was necessary to completely separate the MPI and RTE progress engines. There were multiple places in the MPI layer where ORTE_WAIT_FOR_COMPLETION was being used. A new OMPI_WAIT_FOR_COMPLETION macro was created (defined in ompi/mca/rte/rte.h) that simply cycles across opal_progress until the provided flag becomes false. Places where the MPI layer blocked waiting for RTE to complete an event have been modified to use this macro.
***************************************************************************************
I am reissuing this RFC because of the time that has passed since its original release. Since its initial release and review, I have debugged it further to ensure it fully supports tests like loop_spawn. It therefore seems ready for merge back to the trunk. Given its prior review, I have set the timeout for one week.
The code is in https://bitbucket.org/rhc/ompi-oob2
WHAT: Rewrite of ORTE OOB
WHY: Support asynchronous progress and a host of other features
WHEN: Wed, August 21
SYNOPSIS:
The current OOB has served us well, but a number of limitations have been identified over the years. Specifically:
* it is only progressed when called via opal_progress, which can lead to hangs or recursive calls into libevent (which is not supported by that code)
* we've had issues when multiple NICs are available as the code doesn't "shift" messages between transports - thus, all nodes had to be available via the same TCP interface.
* the OOB "unloads" incoming opal_buffer_t objects during the transmission, thus preventing use of OBJ_RETAIN in the code when repeatedly sending the same message to multiple recipients
* there is no failover mechanism across NICs - if the selected NIC (or its attached switch) fails, we are forced to abort
* only one transport (i.e., component) can be "active"
The revised OOB resolves these problems:
* async progress is used for all application processes, with the progress thread blocking in the event library
* each available TCP NIC is supported by its own TCP module. The ability to asynchronously progress each module independently is provided, but not enabled by default (a runtime MCA parameter turns it "on")
* multi-address TCP NICs (e.g., a NIC with both an IPv4 and IPv6 address, or with virtual interfaces) are supported - reachability is determined by comparing the contact info for a peer against all addresses within the range covered by the address/mask pairs for the NIC.
* a message that arrives on one TCP NIC is automatically shifted to whatever NIC that is connected to the next "hop" if that peer cannot be reached by the incoming NIC. If no TCP module will reach the peer, then the OOB attempts to send the message via all other available components - if none can reach the peer, then an "error" is reported back to the RML, which then calls the errmgr for instructions.
* opal_buffer_t now conforms to standard object rules re OBJ_RETAIN as we no longer "unload" the incoming object
* NIC failure is reported to the TCP component, which then tries to resend the message across any other available TCP NIC. If that doesn't work, then the message is given back to the OOB base to try using other components. If all that fails, then the error is reported to the RML, which reports to the errmgr for instructions
* obviously from the above, multiple OOB components (e.g., TCP and UD) can be active in parallel
* the matching code has been moved to the RML (and out of the OOB/TCP component) so it is independent of transport
* routing is done by the individual OOB modules (as opposed to the RML). Thus, both routed and non-routed transports can simultaneously be active
* all blocking send/recv APIs have been removed. Everything operates asynchronously.
KNOWN LIMITATIONS:
* although provision is made for component failover as described above, the code for doing so has not been fully implemented yet. At the moment, if all connections for a given peer fail, the errmgr is notified of a "lost connection", which by default results in termination of the job if it was a lifeline
* the IPv6 code is present and compiles, but is not complete. Since the current IPv6 support in the OOB doesn't work anyway, I don't consider this a blocker
* routing is performed at the individual module level, yet the active routed component is selected on a global basis. We probably should update that to reflect that different transports may need/choose to route in different ways
* obviously, not every error path has been tested nor necessarily covered
* determining abnormal termination is more challenging than in the old code as we now potentially have multiple ways of connecting to a process. Ideally, we would declare "connection failed" when *all* transports can no longer reach the process, but that requires some additional (possibly complex) code. For now, the code replicates the old behavior only somewhat modified - i.e., if a module sees its connection fail, it checks to see if it is a lifeline. If so, it notifies the errmgr that the lifeline is lost - otherwise, it notifies the errmgr that a non-lifeline connection was lost.
* reachability is determined solely on the basis of a shared subnet address/mask - more sophisticated algorithms (e.g., the one used in the tcp btl) are required to handle routing via gateways
* the RML needs to assign sequence numbers to each message on a per-peer basis. The receiving RML will then deliver messages in order, thus preventing out-of-order messaging in the case where messages travel across different transports or a message needs to be redirected/resent due to failure of a NIC
This commit was SVN r29058.
So shift the cutoff param to the MPI layer, and have it solely determine whether or not we call modex_recv on the hostname. If comm_world is of size greater than the cutoff, then we don't automatically retrieve the hostname when we build the ompi_proc_t for a process - instead, we fill the hostname entry on first call to modex_recv for that process.
The param is now "ompi_hostname_cutoff=N", where N=number of procs for cutoff.
Refs trac:3729
This commit was SVN r29056.
The following Trac tickets were found above:
Ticket 3729 --> https://svn.open-mpi.org/trac/ompi/ticket/3729
* add a new MCA param orte_hostname_cutoff to specify the number of nodes at which we stop including hostnames. This defaults to INT_MAX => always include hostnames. If a value is given, then we will include hostnames for any allocation smaller than the given limit.
* remove ompi_proc_get_hostname. Replace all occurrences with a direct link to ompi_proc_t's proc_hostname, protected by appropriate "if NULL"
* modify the OMPI-ORTE integration component so that any call to modex_recv automatically loads the ompi_proc_t->proc_hostname field as well as returning the requested info. Thus, any process whose modex info you retrieve will automatically receive the hostname. Note that on-demand retrieval is still enabled - i.e., if we are running under direct launch with PMI, the hostname will be fetched upon first call to modex_recv, and then the ompi_proc_t->proc_hostname field will be loaded
* removed a stale MCA param "mpi_keep_peer_hostnames" that was no longer used anywhere in the code base
* added an envar lookup in ess/pmi for the number of nodes in the allocation. Sadly, PMI itself doesn't provide that info, so we have to get it a different way. Currently, we support PBS-based systems and SLURM - for any other, rank0 will emit a warning and we assume max number of daemons so we will always retain hostnames
This commit was SVN r29052.
Features:
- Support for an override parameter file (openmpi-mca-param-override.conf).
Variable values in this file can not be overridden by any file or environment
value.
- Support for boolean, unsigned, and unsigned long long variables.
- Support for true/false values.
- Support for enumerations on integer variables.
- Support for MPIT scope, verbosity, and binding.
- Support for command line source.
- Support for setting variable source via the environment using
OMPI_MCA_SOURCE_<var name>=source (either command or file:filename)
- Cleaner API.
- Support for variable groups (equivalent to MPIT categories).
Notes:
- Variables must be created with a backing store (char **, int *, or bool *)
that must live at least as long as the variable.
- Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of
mca_base_var_set_value() to change the value.
- String values are duplicated when the variable is registered. It is up to
the caller to free the original value if necessary. The new value will be
freed by the mca_base_var system and must not be freed by the user.
- Variables with constant scope may not be settable.
- Variable groups (and all associated variables) are deregistered when the
component is closed or the component repository item is freed. This
prevents a segmentation fault from accessing a variable after its component
is unloaded.
- After some discussion we decided we should remove the automatic registration
of component priority variables. Few component actually made use of this
feature.
- The enumerator interface was updated to be general enough to handle
future uses of the interface.
- The code to generate ompi_info output has been moved into the MCA variable
system. See mca_base_var_dump().
opal: update core and components to mca_base_var system
orte: update core and components to mca_base_var system
ompi: update core and components to mca_base_var system
This commit also modifies the rmaps framework. The following variables were
moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode,
rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables.
This commit was SVN r28236.
