This is a fairly intrusive change, but outside of the moving of opal/event to opal/mca/event, the only changes involved (a) changing all calls to opal_event functions to reflect the new framework instead, and (b) ensuring that all opal_event_t objects are properly constructed since they are now true opal_objects.
Note: Shiqing has just returned from vacation and has not yet had a chance to complete the Windows integration. Thus, this commit almost certainly breaks Windows support on the trunk. However, I want this to have a chance to soak for as long as possible before I become less available a week from today (going to be at a class for 5 days, and thus will only be sparingly available) so we can find and fix any problems.
Biggest change is moving the libevent code from opal/event to a new opal/mca/event framework. This was done to make it much easier to update libevent in the future. New versions can be inserted as a new component and tested in parallel with the current version until validated, then we can remove the earlier version if we so choose. This is a statically built framework ala installdirs, so only one component will build at a time. There is no selection logic - the sole compiled component simply loads its function pointers into the opal_event struct.
I have gone thru the code base and converted all the libevent calls I could find. However, I cannot compile nor test every environment. It is therefore quite likely that errors remain in the system. Please keep an eye open for two things:
1. compile-time errors: these will be obvious as calls to the old functions (e.g., opal_evtimer_new) must be replaced by the new framework APIs (e.g., opal_event.evtimer_new)
2. run-time errors: these will likely show up as segfaults due to missing constructors on opal_event_t objects. It appears that it became a typical practice for people to "init" an opal_event_t by simply using memset to zero it out. This will no longer work - you must either OBJ_NEW or OBJ_CONSTRUCT an opal_event_t. I tried to catch these cases, but may have missed some. Believe me, you'll know when you hit it.
There is also the issue of the new libevent "no recursion" behavior. As I described on a recent email, we will have to discuss this and figure out what, if anything, we need to do.
This commit was SVN r23925.
This merges the branch containing the revamped build system based around converting autogen from a bash script to a Perl program. Jeff has provided emails explaining the features contained in the change.
Please note that configure requirements on components HAVE CHANGED. For example. a configure.params file is no longer required in each component directory. See Jeff's emails for an explanation.
This commit was SVN r23764.
http://www.open-mpi.org/community/lists/devel/2010/07/8240.php
Documentation:
http://osl.iu.edu/research/ft/
Major Changes:
--------------
* Added C/R-enabled Debugging support.
Enabled with the --enable-crdebug flag. See the following website for more information:
http://osl.iu.edu/research/ft/crdebug/
* Added Stable Storage (SStore) framework for checkpoint storage
* 'central' component does a direct to central storage save
* 'stage' component stages checkpoints to central storage while the application continues execution.
* 'stage' supports offline compression of checkpoints before moving (sstore_stage_compress)
* 'stage' supports local caching of checkpoints to improve automatic recovery (sstore_stage_caching)
* Added Compression (compress) framework to support
* Add two new ErrMgr recovery policies
* {{{crmig}}} C/R Process Migration
* {{{autor}}} C/R Automatic Recovery
* Added the {{{ompi-migrate}}} command line tool to support the {{{crmig}}} ErrMgr component
* Added CR MPI Ext functions (enable them with {{{--enable-mpi-ext=cr}}} configure option)
* {{{OMPI_CR_Checkpoint}}} (Fixes trac:2342)
* {{{OMPI_CR_Restart}}}
* {{{OMPI_CR_Migrate}}} (may need some more work for mapping rules)
* {{{OMPI_CR_INC_register_callback}}} (Fixes trac:2192)
* {{{OMPI_CR_Quiesce_start}}}
* {{{OMPI_CR_Quiesce_checkpoint}}}
* {{{OMPI_CR_Quiesce_end}}}
* {{{OMPI_CR_self_register_checkpoint_callback}}}
* {{{OMPI_CR_self_register_restart_callback}}}
* {{{OMPI_CR_self_register_continue_callback}}}
* The ErrMgr predicted_fault() interface has been changed to take an opal_list_t of ErrMgr defined types. This will allow us to better support a wider range of fault prediction services in the future.
* Add a progress meter to:
* FileM rsh (filem_rsh_process_meter)
* SnapC full (snapc_full_progress_meter)
* SStore stage (sstore_stage_progress_meter)
* Added 2 new command line options to ompi-restart
* --showme : Display the full command line that would have been exec'ed.
* --mpirun_opts : Command line options to pass directly to mpirun. (Fixes trac:2413)
* Deprecated some MCA params:
* crs_base_snapshot_dir deprecated, use sstore_stage_local_snapshot_dir
* snapc_base_global_snapshot_dir deprecated, use sstore_base_global_snapshot_dir
* snapc_base_global_shared deprecated, use sstore_stage_global_is_shared
* snapc_base_store_in_place deprecated, replaced with different components of SStore
* snapc_base_global_snapshot_ref deprecated, use sstore_base_global_snapshot_ref
* snapc_base_establish_global_snapshot_dir deprecated, never well supported
* snapc_full_skip_filem deprecated, use sstore_stage_skip_filem
Minor Changes:
--------------
* Fixes trac:1924 : {{{ompi-restart}}} now recognizes path prefixed checkpoint handles and does the right thing.
* Fixes trac:2097 : {{{ompi-info}}} should now report all available CRS components
* Fixes trac:2161 : Manual checkpoint movement. A user can 'mv' a checkpoint directory from the original location to another and still restart from it.
* Fixes trac:2208 : Honor various TMPDIR varaibles instead of forcing {{{/tmp}}}
* Move {{{ompi_cr_continue_like_restart}}} to {{{orte_cr_continue_like_restart}}} to be more flexible in where this should be set.
* opal_crs_base_metadata_write* functions have been moved to SStore to support a wider range of metadata handling functionality.
* Cleanup the CRS framework and components to work with the SStore framework.
* Cleanup the SnapC framework and components to work with the SStore framework (cleans up these code paths considerably).
* Add 'quiesce' hook to CRCP for a future enhancement.
* We now require a BLCR version that supports {{{cr_request_file()}}} or {{{cr_request_checkpoint()}}} in order to make the code more maintainable. Note that {{{cr_request_file}}} has been deprecated since 0.7.0, so we prefer to use {{{cr_request_checkpoint()}}}.
* Add optional application level INC callbacks (registered through the CR MPI Ext interface).
* Increase the {{{opal_cr_thread_sleep_wait}}} parameter to 1000 microseconds to make the C/R thread less aggressive.
* {{{opal-restart}}} now looks for cache directories before falling back on stable storage when asked.
* {{{opal-restart}}} also support local decompression before restarting
* {{{orte-checkpoint}}} now uses the SStore framework to work with the metadata
* {{{orte-restart}}} now uses the SStore framework to work with the metadata
* Remove the {{{orte-restart}}} preload option. This was removed since the user only needs to select the 'stage' component in order to support this functionality.
* Since the '-am' parameter is saved in the metadata, {{{ompi-restart}}} no longer hard codes {{{-am ft-enable-cr}}}.
* Fix {{{hnp}}} ErrMgr so that if a previous component in the stack has 'fixed' the problem, then it should be skipped.
* Make sure to decrement the number of 'num_local_procs' in the orted when one goes away.
* odls now checks the SStore framework to see if it needs to load any checkpoint files before launching (to support 'stage'). This separates the SStore logic from the --preload-[binary|files] options.
* Add unique IDs to the named pipes established between the orted and the app in SnapC. This is to better support migration and automatic recovery activities.
* Improve the checks for 'already checkpointing' error path.
* A a recovery output timer, to show how long it takes to restart a job
* Do a better job of cleaning up the old session directory on restart.
* Add a local module to the autor and crmig ErrMgr components. These small modules prevent the 'orted' component from attempting a local recovery (Which does not work for MPI apps at the moment)
* Add a fix for bounding the checkpointable region between MPI_Init and MPI_Finalize.
This commit was SVN r23587.
The following Trac tickets were found above:
Ticket 1924 --> https://svn.open-mpi.org/trac/ompi/ticket/1924
Ticket 2097 --> https://svn.open-mpi.org/trac/ompi/ticket/2097
Ticket 2161 --> https://svn.open-mpi.org/trac/ompi/ticket/2161
Ticket 2192 --> https://svn.open-mpi.org/trac/ompi/ticket/2192
Ticket 2208 --> https://svn.open-mpi.org/trac/ompi/ticket/2208
Ticket 2342 --> https://svn.open-mpi.org/trac/ompi/ticket/2342
Ticket 2413 --> https://svn.open-mpi.org/trac/ompi/ticket/2413
(OMPI_ERR_* = OPAL_SOS_GET_ERR_CODE(ret)), since the return value could be a
SOS-encoded error. The OPAL_SOS_GET_ERR_CODE() takes in a SOS error and returns
back the native error code.
* Since OPAL_SUCCESS is preserved by SOS, also change all calls of the form
(OPAL_ERROR == ret) to (OPAL_SUCCESS != ret). We thus avoid having to
decode 'ret' to get the native error code.
This commit was SVN r23162.
Many of the OPAL_ENABLE_FT should be OPAL_ENABLE_FT_CR, so fix those.
The OPAL Layer INC should call opal_output on restart so that it can refresh the string it prints to reflect the current pid/hostname which may have changed.
This commit was SVN r22824.
Originally the patch was to improve the error message, but when digging into the code I found a subtle bug. If the daemon does not tell the HNP what CRS component it used, then the HNP tries to figure it out from the metadata (this is an uncommon case). The path the HNP used was not complete, so it was unable to find the metadata information. This patch fixes this by adding the 'snapshot_reference' to the 'snapshot_location' which completes the path for this search.
cmr:v1.4 (needs a custom patch)
cmr:v1.5
This commit was SVN r22479.
The following Trac tickets were found above:
Ticket 2190 --> https://svn.open-mpi.org/trac/ompi/ticket/2190
This commit looks larger than it really is since it includes a fair amount of code cleanup.
The SIGSTOP/SIGCONT+checkpointing work uses some of the functionality in r20391. Basic use case below (note that the checkpoint generated is useable as usual if the stopped application is terminated).
{{{
shell 1) mpirun -np 2 -am ft-enable-cr my-app
... running ...
shell 2) ompi-checkpoint --stop -v MPIRUN_PID
[localhost:001300] [ 0.00 / 0.20] Requested - ...
[localhost:001300] [ 0.00 / 0.20] Pending - ...
[localhost:001300] [ 0.01 / 0.21] Running - ...
[localhost:001300] [ 1.01 / 1.22] Stopped - ompi_global_snapshot_1234.ckpt
Snapshot Ref.: 0 ompi_global_snapshot_1234.ckpt
shell 2) killall -CONT mpirun
... Application Continues execution in shell 1 ...
}}}
Other items in this commit are mostly cleanup that has been sitting off-trunk for too long:
* Add a new {{{opal_crs_base_ckpt_options_t}}} type that encapsulates the various options that could be passed to the CRS. Currently only TERM and STOP, but this makes adding others ''much'' easier.
* Eliminate ORTE_SNAPC_CKPT_STATE_PENDING_TERM, since it served a redundant purpose with the new options type.
* Lay some basic ground work for some future features.
This commit was SVN r21995.
The following SVN revision numbers were found above:
r20391 --> open-mpi/ompi@0704b98668
Due to a typo (probably cut/paste error) the CFLAGS/CPPFLAGS/LDFLAGS/LIBS arguments were not propogated to the BLCR component.
This changes a few {{{crs_blcr_check_}}} to {{{crs_blcr_save}}}, which they should have been all along.
This needs to be applied to v1.3 as well :/
This commit was SVN r21860.
#if defined (c_plusplus)
defined (__cplusplus)
followed by
extern "C" {
and the closing counterpart by BEGIN_C_DECLS and END_C_DECLS.
Notable exceptions are:
- opal/include/opal_config_bottom.h:
This is our generated code, that itself defines BEGIN_C_DECL and
END_C_DECL
- ompi/mpi/cxx/mpicxx.h:
Here we do not include opal_config_bottom.h:
- Belongs to external code:
opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.c
opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.h
- opal/include/opal/prefetch.h:
Has C++ specific macros that are protected:
- Had #if ... } #endif _and_ END_C_DECLS (aka end up with 2x
END_C_DECLS)
ompi/mca/btl/openib/btl_openib.h
- opal/event/event.h has #ifdef __cplusplus as BEGIN_C_DECLS...
- opal/win32/ompi_process.h: had extern "C"\n {...
opal/win32/ompi_process.h: dito
- ompi/mca/btl/pcie/btl_pcie_lex.l: needed to add *_C_DECLS
ompi/mpi/f90/test/align_c.c: dito
- ompi/debuggers/msgq_interface.h: used #ifdef __cplusplus
- ompi/mpi/f90/xml/common-C.xsl: Amend
Tested on linux using --with-openib and --with-mx
The following do not contain either opal_config.h, orte_config.h or
ompi_config.h
(but possibly other header files, that include one of the above):
ompi/mca/bml/r2/bml_r2_ft.h
ompi/mca/btl/gm/btl_gm_endpoint.h
ompi/mca/btl/gm/btl_gm_proc.h
ompi/mca/btl/mx/btl_mx_endpoint.h
ompi/mca/btl/ofud/btl_ofud_endpoint.h
ompi/mca/btl/ofud/btl_ofud_frag.h
ompi/mca/btl/ofud/btl_ofud_proc.h
ompi/mca/btl/openib/btl_openib_mca.h
ompi/mca/btl/portals/btl_portals_endpoint.h
ompi/mca/btl/portals/btl_portals_frag.h
ompi/mca/btl/sctp/btl_sctp_endpoint.h
ompi/mca/btl/sctp/btl_sctp_proc.h
ompi/mca/btl/tcp/btl_tcp_endpoint.h
ompi/mca/btl/tcp/btl_tcp_ft.h
ompi/mca/btl/tcp/btl_tcp_proc.h
ompi/mca/btl/template/btl_template_endpoint.h
ompi/mca/btl/template/btl_template_proc.h
ompi/mca/btl/udapl/btl_udapl_eager_rdma.h
ompi/mca/btl/udapl/btl_udapl_endpoint.h
ompi/mca/btl/udapl/btl_udapl_mca.h
ompi/mca/btl/udapl/btl_udapl_proc.h
ompi/mca/mtl/mx/mtl_mx_endpoint.h
ompi/mca/mtl/mx/mtl_mx.h
ompi/mca/mtl/psm/mtl_psm_endpoint.h
ompi/mca/mtl/psm/mtl_psm.h
ompi/mca/pml/cm/pml_cm_component.h
ompi/mca/pml/csum/pml_csum_comm.h
ompi/mca/pml/dr/pml_dr_comm.h
ompi/mca/pml/dr/pml_dr_component.h
ompi/mca/pml/dr/pml_dr_endpoint.h
ompi/mca/pml/dr/pml_dr_recvfrag.h
ompi/mca/pml/example/pml_example.h
ompi/mca/pml/ob1/pml_ob1_comm.h
ompi/mca/pml/ob1/pml_ob1_component.h
ompi/mca/pml/ob1/pml_ob1_endpoint.h
ompi/mca/pml/ob1/pml_ob1_rdmafrag.h
ompi/mca/pml/ob1/pml_ob1_recvfrag.h
ompi/mca/pml/v/pml_v_output.h
opal/include/opal/prefetch.h
opal/mca/timer/aix/timer_aix.h
opal/util/qsort.h
test/support/components.h
This commit was SVN r21855.
The following SVN revision numbers were found above:
r2 --> open-mpi/ompi@58fdc18855
Refs trac:1987
The patch for v1.3 attached to Ticket #1987 already includes this change.
I did not have a chance to commit this last night, so sorry for the delay.
This commit was SVN r21777.
The following Trac tickets were found above:
Ticket 1987 --> https://svn.open-mpi.org/trac/ompi/ticket/1987
* Check for {{{dlfcn.h}}} in the self component's configure.m4 (also clean up the .m4 a bit.
* Adjust the priority of the BLCR component so that the self component has a higher priority (if the application went to the trouble of writing the routines, why not use them.) The 'self' component checks for the appropriate functions during query, so it know if it -can- be used during component selection.
* Adjust some copyrights that I missed before
* Fix a warning when casing the result of dlsym() into a function pointer. There is a bit of pointer magic to make this happen (thanks to the following website, and RedHat EL 4 man pages for illustrating it:
http://www.opengroup.org/onlinepubs/009695399/functions/dlsym.html
Passing to Jeff for a final review of the patch before moving to v1.3.
This commit was SVN r21768.
The following SVN revision numbers were found above:
r21766 --> open-mpi/ompi@91e52d062b
Due to the visibility patch to libltdl in r21731, this module can no longer access or use the libltdl interfaces directly. Instead just use the dlopen/dlsym/dlclose functions directly. This is a portability implication here, but for the moment it does not seem to bite us.
Also in this patch, cleanup some of the 'self' specific code paths.
* opal-restart need not special case the 'self' component since it can now interact with it as if it were a normal component.
* Cleanup the initialization of the cmd line arguments in opal-restart.
* Make sure to mark opal-restart as a 'tool', but do so by setting the global variable directly instead of setting the environment variable, which could be inherited by the application.
* Most of the functions in the 'self' component should not be used by a command line tool (exception being 'restart'), so make sure that if we accidently call them then errors are returned.
* Increase the priority of the 'none' component to be above that of 'self' when being selected in a command line tool. This allows for both mpirun and opal-restart to work correctly with the 'self' module.
This commit was SVN r21766.
The following SVN revision numbers were found above:
r21731 --> open-mpi/ompi@0278b86456
* Pass the sequence number of the checkpoint along with reference from the global to the local coordinator.
* 'orte-restart --apponly' now just generates the app context file, and does not run with it. This provides the user the ability to edit the file before launching.
* Add a OPAL_CRS_NONE state
* Split the INC into three distinct parts.
* Implement a restart mechanism for the 'none' component. If given a context it simply execvp()'s it.
This commit was SVN r21195.
* Add 'orte-checkpoint -l' option that lists all checkpoints currently available on the system.
* Add 'orte-restart -i' which prints information regarding the checkpoint targeted for restart.
* Add ability to extract the timing metadata.
* Fix show_help() in the orte-checkpoint and orte-restart tools. They should be using the opal versions instead of the orte versions (otherwise nothing is printed).
This commit was SVN r21194.
OMPI_* to OPAL_*. This allows opal layer to be used more independent
from the whole of ompi.
NOTE: 9 "svn mv" operations immediately follow this commit.
This commit was SVN r21180.
This patch contains the following items:
* Fix the flag passed to open() for the read side of the named pipe between the local and app coordinator. There is a race condition when using O_RDWR on a named pipe (not sure how that bug got in there in the first place).
* Adjust control in the C/R thread timing
* Clarify return code in BLCR component
* Allow the user to adjust the max wait time for the named pipes in the FileM local coordinator by using the MCA parameter "snapc_full_max_wait_time" (Default: 20 seconds)
* If the application terminates while there are active FileM operations, force mpirun to wait on these operations to complete.
* Allow the user to set the local copy command (Default: cp) via MCA parameter "filem_rsh_cp"
* Implement the ability to throttle the number of outgoing connections in FileM. At larger scales this type of explicit throttling helps prevent overwhelming the HNP machine. Default: 10, set via MCA parameter: {{{filem_rsh_max_outgoing}}}
This commit was SVN r21167.
The following SVN revision numbers were found above:
r21131 --> open-mpi/ompi@0deb009225
- Delete unnecessary header files using
contrib/check_unnecessary_headers.sh after applying
patches, that include headers, being "lost" due to
inclusion in one of the now deleted headers...
In total 817 files are touched.
In ompi/mpi/c/ header files are moved up into the actual c-file,
where necessary (these are the only additional #include),
otherwise it is only deletions of #include (apart from the above
additions required due to notifier...)
- To get different MCAs (OpenIB, TM, ALPS), an earlier version was
successfully compiled (yesterday) on:
Linux locally using intel-11, gcc-4.3.2 and gcc-SVN + warnings enabled
Smoky cluster (x86-64 running Linux) using PGI-8.0.2 + warnings enabled
Lens cluster (x86-64 running Linux) using Pathscale-3.2 + warnings enabled
This commit was SVN r21096.
generate mangled windex files. Made ompi-top.1 and ompi-iof.1 build
by default. Also, added the orte-top synonym to the ompi-top manpage.
This commit was SVN r20915.
In case we use memcmp, strlen, strup and friends include <string.h>
Also several constants.h are not included directly
- Let's have mca_topo_base_cart_create return ompi-errors in
ompi/mca/topo/base/topo_base_cart_create.c
This commit was SVN r20773.
It happened that if we supplied:
--with-ft=cr --without-blcr
then BLCR would be loaded, due to a logic break in the old m4.
Now this works approprately. This should be moved to v1.3.1
This commit was SVN r20296.
This commit fixes trac:1691
Thanks to Matthias Hovestadt for identifying this issue.
This commit was SVN r20114.
The following Trac tickets were found above:
Ticket 1691 --> https://svn.open-mpi.org/trac/ompi/ticket/1691
There is still a problem with OpenIB and threads (external to C/R functionality). It has been reported in Ticket #1539
Additionally:
* Fix a file cleanup bug in CRS Base.
* Fix a possible deadlock in the TCP ft_event function
* Add a mca_base_param_deregister() function to MCA base
* Add whole process checkpoint timers
* Add support for BTL: OpenIB, MX, Shared Memory
* Add support Mpool: rdma, sm
* Sundry bounds checking an cleanup in some scattered functions
This commit was SVN r19756.
* Make the creation of the build dir for the man pages a bit more
robust (thanks to suggestions from Ralf W.).
* Only distribute the .Xin files, not the .X man pages themselves.
* Make the .X files depend on opal_config.h so that if you re-run
configure and change opal_config.h (e.g., a new version), the man
pages should get rebuilt.
* Man pages are now cleaned with "distclean", not "maintainer-clean".
* Fix a typo in opal_crs.7in.
* Udpate make_dist_tarball to update "date" in the VERSION file.
* Make make_dist_tarball a bit friendlier to hg checkouts.
This commit was SVN r19219.
versions, dates and build names.
Fixes trac:1387
Big thanks to Jeff and Brian for help and oversight.
This commit was SVN r19120.
The following Trac tickets were found above:
Ticket 1387 --> https://svn.open-mpi.org/trac/ompi/ticket/1387
* add "register" function to mca_base_component_t
* converted coll:basic and paffinity:linux and paffinity:solaris to
use this function
* we'll convert the rest over time (I'll file a ticket once all
this is committed)
* add 32 bytes of "reserved" space to the end of mca_base_component_t
and mca_base_component_data_2_0_0_t to make future upgrades
[slightly] easier
* new mca_base_component_t size: 196 bytes
* new mca_base_component_data_2_0_0_t size: 36 bytes
* MCA base version bumped to v2.0
* '''We now refuse to load components that are not MCA v2.0.x'''
* all MCA frameworks versions bumped to v2.0
* be a little more explicit about version numbers in the MCA base
* add big comment in mca.h about versioning philosophy
This commit was SVN r19073.
The following Trac tickets were found above:
Ticket 1392 --> https://svn.open-mpi.org/trac/ompi/ticket/1392
I promoted the ''none'' component to a full component, and updated the other components to reflect this code movement. The ''none'' component is the default component unless the user requests '''-am ft-enable-cr''' to auto-select a component. There is an MCA parameter to show a warning if the application requested an FT enabled job, but the ''none'' component was selected ({{{crs_none_select_warning}}}).
This temporarily fixes the problem mentioned in r18739. The full fix will entail working on ticket #1291.
Thanks to Ethan from Sun for finding this bug.
This commit was SVN r18840.
The following SVN revision numbers were found above:
r18739 --> open-mpi/ompi@a003fa7a50
Make sure that if we ask for the 'none' component (which is not a 'real' component, but a component in crs/base) then we do not fail out of the box when using tools. We check for the {{{OPAL_ERR_NOT_FOUND}}} error.
Also make sure that component_open() returns {{{OPAL_ERR_NOT_FOUND}}} when it cannot find a value instead of {{{OPAL_ERROR}}} which means something quite a bit different.
C/R is working but the tools still print the warning below everytime they are ran:
{{{
--------------------------------------------------------------------------
A requested component was not found, or was unable to be opened. This
means that this component is either not installed or is unable to be
used on your system (e.g., sometimes this means that shared libraries
that the component requires are unable to be found/loaded). Note that
Open MPI stopped checking at the first component that it did not find.
Host: odin.cs.indiana.edu
Framework: crs
Component: none
--------------------------------------------------------------------------
}}}
I'll have to figure out a work around for this warning (maybe work on the {{{MCA_NULL}}} Ticket #1291).
This commit was SVN r18739.
The following SVN revision numbers were found above:
r18707 --> open-mpi/ompi@bdaaf01d8a
