This merge adds Checkpoint/Restart support to Open MPI. The initial
frameworks and components support a LAM/MPI-like implementation.
This commit follows the risk assessment presented to the Open MPI core
development group on Feb. 22, 2007.
This commit closes trac:158
More details to follow.
This commit was SVN r14051.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r13912
The following Trac tickets were found above:
Ticket 158 --> https://svn.open-mpi.org/trac/ompi/ticket/158
1. no -np provided - put one proc/node across all allocated nodes
2. -np N provided, N > #nodes - we print a pretty error message and exit
3. -np N provided, N <= #nodes - put one proc/node across N nodes
I also added a new orte constant (ORTE_ERR_SILENT) that allows us to pass up the chain that an error was encountered, but NOT print ORTE_ERROR_LOG messages. This is intended to be used for cases where the error we encounter is NOT an orte error, but rather is one associated with incorrect user input (e.g., the preceding case 2). In such cases, there is no point in printing an ORTE_ERROR_LOG chain of messages as it isn't an orte error.
This commit was SVN r12821.
Accordingly, there are new APIs to the name service to support the ability to get a job's parent, root, immediate children, and all its descendants. In addition, the terminate_job, terminate_orted, and signal_job APIs for the PLS have been modified to accept attributes that define the extent of their actions. For example, doing a "terminate_job" with an attribute of ORTE_NS_INCLUDE_DESCENDANTS will terminate the given jobid AND all jobs that descended from it.
I have tested this capability on a MacBook under rsh, Odin under SLURM, and LANL's Flash (bproc). It worked successfully on non-MPI jobs (both simple and including a spawn), and MPI jobs (again, both simple and with a spawn).
This commit was SVN r12597.
Fix the problem observed by multiple people that comm_spawned children were (once again) being mapped onto the same nodes as their parents. This was caused by going through the RAS a second time, thus overwriting the mapper's bookkeeping that told RMAPS where it had left off.
To solve this - and to continue moving forward on the ORTE development - we introduce the concept of attributes to control the behavior of the RM frameworks. I defined the attributes and a list of attributes as new ORTE data types to make it easier for people to pass them around (since they are now fundamental to the system, and therefore we will be packing and unpacking them frequently). Thus, all the functions to manipulate attributes can be implemented and debugged in one place.
I used those capabilities in two places:
1. Added an attribute list to the rmgr.spawn interface.
2. Added an attribute list to the ras.allocate interface. At the moment, the only attribute I modified the various RAS components to recognize is the USE_PARENT_ALLOCATION one (as defined in rmgr_types.h).
So the RAS components now know how to reuse an allocation. I have debugged this under rsh, but it now needs to be tested on a wider set of platforms.
This commit was SVN r12138.
- everything statically built (dynamically opened).
- OPAL, ORTE and OMPI static libraries and all the components
as dynamic files(DLL).
- everything as dynamic files (DLL).
This commit was SVN r11461.
- use the OPAL functions for PATH and environment variables
- make all headers C++ friendly
- no unamed structures
- no implicit cast.
Plus a full implementation for the orte_wait functions.
This commit was SVN r11347.
different macros, one for each project. Therefore, now we have OPAL_DECLSPEC,
ORTE_DECLSPEC and OMPI_DECLSPEC. Please use them based on the sub-project.
This commit was SVN r11270.
Clean up the remainder of the size_t references in the runtime itself. Convert to orte_std_cntr_t wherever it makes sense (only avoid those places where the actual memory size is referenced).
Remove the obsolete oob barrier function (we actually obsoleted it a long time ago - just never bothered to clean it up).
I have done my best to go through all the components and catch everything, even if I couldn't test compile them since I wasn't on that type of system. Still, I cannot guarantee that problems won't show up when you test this on specific systems. Usually, these will just show as "warning: comparison between signed and unsigned" notes which are easily fixed (just change a size_t to orte_std_cntr_t).
In some places, people didn't use size_t, but instead used some other variant (e.g., I found several places with uint32_t). I tried to catch all of them, but...
Once we get all the instances caught and fixed, this should once and for all resolve many of the heterogeneity problems.
This commit was SVN r11204.
1. Introduces a flag for the type of buffer that now allows a user to either have a fully described or a completely non-described buffer. In the latter case, no data type descriptions are included in the buffer. This obviously limits what we can do for debugging purposes, but the intent here was to provide an optimized communications capability for those wanting it.
Note that individual buffers can be designated for either type using the orte_dss.set_buffer_type command. In other words, the buffer type can be set dynamically - it isn't a configuration setting at all. The type will default to fully described. A buffer MUST be empty to set its type - this is checked by the set_buffer_type command, and you will receive an error if you violate that rule.
IMPORTANT NOTE: ORTE 1.x actually will NOT work with non-described buffers. This capability should therefore NOT be used until we tell you it is okay. For now, it is here simply so we can begin bringing over parts of ORTE 2.0. The problem is that ORTE 1.x depends upon the transmission of non-hard-cast data types such as size_t. These "soft" types currently utilize a "peek" function to see their actual type in the buffer - obviously, without description, the system has no idea how to unpack these "soft" types. We will deal with this later - for now, please don't use the non-described buffer option.
2. Introduces the orte_std_cntr_t type. This will become the replacement for the size_t's used throughout ORTE 1.x. At the moment, it is actually typedef'd to size_t for backward compatibility.
3. Introduces the orte_dss.arith API that supports arbitrary arithmetic functions on numeric data types. Calling the function with any other data type will generate an error.
This commit was SVN r11075.
Update the help text to report errors when not following that rule.
Also updated the RMAPS help text to reflect the reorganization of some of the round-robin code into the base.
The new functionality has been tested under Mac OS-X and on Odin using an MPI program. Both byslot and bynode mapping have been checked and verified. Operational support for other systems needs to be verified - I respectfully request people's help in doing so.
This commit was SVN r10708.
1. Modifies the RAS framework so it correctly stores and retrieves the actual slots in use, not just those that were allocated. Although the RAS node structure had storage for the number of slots in use, it turned out that the base function for storing and retrieving that information ignored what was in the field and simply set it equal to the number of slots allocated. This has now been fixed.
2. Modified the RMAPS framework so it updates the registry with the actual number of slots used by the mapping. Note that daemons are still NOT counted in this process as daemons are NOT mapped at this time. This will be fixed in 2.0, but will not be addressed in 1.x.
3. Added a new MCA parameter "rmaps_base_no_oversubscribe" that tells the system not to oversubscribe nodes even if the underlying environment permits it. The default is to oversubscribe if needed and the underlying environment permits it. I'm sure someone may argue "why would a user do that?", but it turns out that (looking ahead to dynamic resource reservations) sometimes users won't know how many nodes or slots they've been given in advance - this just allows them to say "hey, I'd rather not run if I didn't get enough".
4. Reorganizes the RMAPS framework to more easily support multiple components. A lot of the logic in the round_robin mapper was very valuable to any component - this has been moved to the base so others can take advantage of it.
5. Added a new test program "hello_nodename" - just does "hello_world" but also prints out the name of the node it is on.
6. Made the orte_ras_node_t object a full ORTE data type so it can more easily be copied, packed, etc. This proved helpful for the RMAPS code reorganization and might be of use elsewhere too.
This commit was SVN r10697.
* Don't do the .in -> .tmp -> header thing for the prefixes and versions.
It causes some severe cleanup issues all to save 4 files from rebuilding
when configure is run.
* Clean up some makefiles so it's clear what is being installed/disted
This commit was SVN r9260.
installation directories) in configure, the files that depend on this
information are not properly rebuilt. If you need this information,
don't setup a -D in the Makefile.am - instead, include
opal/install_dirs.h.
* Use the : option in AC_CONFIG_FILES to avoid needing to expose that
we are playing around with temporary files with our headers to avoid
rebuilding
* Clean up the version file information a bit, and like the install
directory stuff, make sure that there is a dependency so that
ompi_info gets rebuilt properly when a version number changes.
This commit was SVN r9256.
- move files out of toplevel include/ and etc/, moving it into the
sub-projects
- rather than including config headers with <project>/include,
have them as <project>
- require all headers to be included with a project prefix, with
the exception of the config headers ({opal,orte,ompi}_config.h
mpi.h, and mpif.h)
This commit was SVN r8985.
originally suggested by Ralf Wildenhues, to try to speed autogen, configure,
and make (and possibly even make install). Use automake's include directive
to drastically reduce the number of Makefile files (although the number of
Makefile.am files is the same - most are just included in a top-level
Makefile.am). Also use an Automake SUBDIRs feature to eliminate the
dynamic-mca tree, which was no longer really needed. This makes adding
a framework easier (since you don't have to remember the dynamic-mca
tree) and makes building faster (as make doesn't have to recurse through
the dynamic-mca tree)
This commit was SVN r7777.
AM_INIT_AUTOMAKE, instead of the deprecated version.
* Work around dumbness in modern AC_INIT that requires the version
number to be set at autoconf time (instead of at configure time, as
it was before). Set the version number, minus the subversion r number,
at autoconf time. Override the internal variables to include the r
number (if needed) at configure time. Basically, the right thing
should always happen. The only place it might not is the version
reported as part of configure --help will not have an r number.
* Since AM_INIT_AUTOMAKE taks a list of options, no need to specify
them in all the Makefile.am files.
* Addes support for subdir-objects, meaning that object files are put
in the directory containing source files, even if the Makefile.am is
in another directory. This should start making it feasible to
reduce the number of Makefile.am files we have in the tree, which
will greatly reduce the time to run autogen and configure.
This commit was SVN r7211.
Here's the huge registry check-in you've all been waiting for with baited breath. The revised version sends a single message to all processes at the various stage gates, thus making the startup much more scalable. I could provide you with all the tawdry details, but won't for now - you are welcome to ask, though, and I'll merrily bore your ears to tears.
In addition, the commit contains the following:
1. set the ignore properties on ompi/debuggers and orte/mca/pls/poe
2. Added simplified subscribe and put functions to the registry's API. I have also converted all of the ompi functions that registered subscriptions to the new API, and caught their associated put's as well.
In a follow-on commit, I'll be adding support for George's hetero arch registry subscription (wanted to get this one in first).
This commit was SVN r7118.
orte_init_stage1(), since not all ORTE processes call orte_init().
* Expad opal_error test case to make sure ORTE error codes print
properly
* Make project error codes start at easy values (OPAL is -1 to -100,
ORTE is -101 to -200, OMPI is less than -201) to make it easier
to figure out what an error code as an integer means. Also has
the nice property of not changing the values of error codes ever
time a new error code is added.
This commit was SVN r7061.
OPAL_ERROR, same for all the other error codes. Also, make sure that there
are never conflicts between OPAL anr ORTE error codes (for example).
Finally, provide opal_perror(), opal_strerror(), and opal_strerror_r() to
give stringified error messages for the different error codes
This commit was SVN r6969.
This required a little fiddling with a number of areas. Biggest problem was that it uncovered a potential for an infinite loop to be created in the registry. If a callback function modified the registry, the registry checked the triggers to see if anything had fired. Well, if the original callback was due to a trigger firing, that condition hadn't changed - so the trigger fired again....which caused the callback to be called, which modified the registry, which checked the triggers, etc. etc.
Triggers are now checked and then "flagged" as being "in process" so that the registry will NOT recheck that trigger until all callbacks have been processed. Tried doing this with subscriptions as well, but that caused a problem - when we release processes from a stagegate, they (at the moment) immediately place data on the registry that should cause a subscription to fire. Unfortunately, the system will just hang if that subscription doesn't get processed. So, I have left the subscription system alone - any callback function that modifies the registry in a fashion that will fire a subscription will indeed fire that subscription. We'll have to see if this causes problems - it shouldn't, but a careless user could lock things up if the callback generates a callback to itself.
Also fixed the code that placed a process' RML contact info on the registry to eliminate the leading '/' from the string.
This commit was SVN r6684.
1. Modify the registry to eliminate redundant data copying for startup messages.
2. Revise the subscription/trigger system to avoid redundant storage of triggers and subscriptions. This dramatically reduces the search time when a registry action occurs - to illustrate the point, there are now only a handful of triggers on the system for each job. Before, there were a handful of triggers for each PROCESS in the job, all of which had to be checked every time something happened on the registry. This is much, much faster now.
3. Update all subscriptions to the new format. There are now "named" subscriptions - this allows you to "name" a subscription that all the processes will be using. The first one to hit the registry actually defines the subscription. From then on, any subsequent "subscribes" to the same name just cause that process to "attach" to the existing subscription. This keeps the number of subscriptions being tracked by the registry to a minimum, while ensuring that each process still gets notified.
4. Do the same for triggers.
Also fixed a duplicate subscription problem that was causing people to receive data equal to the number of processes times the data they should have received from a trigger/subscription. Sorry about that... :-( ...but it's all better now!
Uncovered a situation where the modex data seems to be getting entered on the registry a second time - the latter time coming after the compound command has been "fired", thereby causing all the subscriptions to fire. Asked Tim and Jeff to look into this.
Second phase of the changes will involve modifying the xcast system so that the same message gets sent to all processes. This will further reduce the message traffic, and - once we have a true "broadcast" version of xcast - really speed things up and improve scalability.
This commit was SVN r6542.
