installation directories) in configure, the files that depend on this
information are not properly rebuilt. If you need this information,
don't setup a -D in the Makefile.am - instead, include
opal/install_dirs.h.
* Use the : option in AC_CONFIG_FILES to avoid needing to expose that
we are playing around with temporary files with our headers to avoid
rebuilding
* Clean up the version file information a bit, and like the install
directory stuff, make sure that there is a dependency so that
ompi_info gets rebuilt properly when a version number changes.
This commit was SVN r9256.
- move files out of toplevel include/ and etc/, moving it into the
sub-projects
- rather than including config headers with <project>/include,
have them as <project>
- require all headers to be included with a project prefix, with
the exception of the config headers ({opal,orte,ompi}_config.h
mpi.h, and mpif.h)
This commit was SVN r8985.
and path->agent_path so that it's totally clear what these are for
- make a new rsh component param for agent_param (the value from the
MCA param)
- delay the path check for the agent until the component init -- don't
make it fail during open, because the MCA base will print a warning
if a component fails open() (e.g., on clusters without rsh/ssh (!),
this component was failing noisly even though it was
normal/expected)
This commit was SVN r8596.
In case of checking for Shell with --mca pls_rsh_assume_same_shell 0
have the node point to sensible values.
This commit was SVN r8563.
The following SVN revision numbers were found above:
r7664 --> open-mpi/ompi@0629cdc2d7
oversubscribed on a node. And thus whether to call sched_yield or not.
The value of node->node_slots_inuse does not currently represent the number of
slots actually in use, at the moment. This is actually a bug in the RAS/RMAPS
base components, but the fix for that specific bug is bigger than we want to
address at the moment (but will certianly do so in the near future).
Since we cannot trust this value, use the total number of mapped processes
(which was properly set by the RMAPS component upon mapping -- Just not
properly propagated back to the registry's node segment) from the process
mapping.
In addition to this change I cleaned up a couple of the debug messages. It
seems that TM and RSH are the only two directly effected by this. SLURM
would be if that section of code wasn't currently inactive, but put the fix
in for prosparity.
This commit was SVN r7743.
command:
svn merge -r 7567:7663 https://svn.open-mpi.org/svn/ompi/tmp/jjhursey-rmaps .
(where "." is a trunk checkout)
The logs from this branch are much more descriptive than I will put
here (including a *really* long description from last night). Here's
the short version:
- fixed some broken implementations in ras and rmaps
- "orterun --host ..." now works and has clearly defined semantics
(this was the impetus for the branch and all these fixes -- LANL had
a requirement for --host to work for 1.0)
- there is still a little bit of cleanup left to do post-1.0 (we got
correct functionality for 1.0 -- we did not fix bad implementations
that still "work")
- rds/hostfile and ras/hostfile handshaking
- singleton node segment assignments in stage1
- remove the default hostfile (no need for it anymore with the
localhost ras component)
- clean up pls components to avoid duplicate ras mapping queries
- [possible] -bynode/-byslot being specific to a single app context
This commit was SVN r7664.
- Fix bug identified by users: --prefix may also apply on the local
node; we need to prefix the PATH and LD_LIBRARY_PATH environment
variables before invoking execve()
This commit was SVN r7541.
add an event, it can call the spawn function directly. This will avoid it standing on the condition who
will never get released.
This commit was SVN r7428.
The following formats are parsed:
user@IPv4
user@fqdn
IPv4 or fqdn [username|user-name|user_name]=user
- Try a better error-detection when parsing (recognize wrong
IPs, fqdns...)
This commit was SVN r7288.
app_context:
mpirun -np 2 -prefix /path/to/ompi/on/machineA ./exec1 : \
-np 2 -prefix /path/to/ompi/on/machineB ./exec2
- Allow with -mca pls_rsh_assume_same_shell 0, the checking for the
SHELL-variable on the actual node (currently 1st node).
Sets the prefix, PATH and LD_LIBRARY_PATH for bash/ksh and
csh/tcsh.
This commit was SVN r7195.
tree.
- fix up #include's throughout the tree (yay contrib/search_replace.pl!)
- remove a few extraneous #include's
- remove orte_sys_info*() from opal_init()/opal_finalize() (it's
already in orte_init_stage1() and orte_system_finalize())
- remove dependencies in opal on orte_system_info -- util/os_path.c
and util/os_create_dirpath.c (they only used path_sep, anyway --
easily changed to #defines)
This commit was SVN r7059.
ns_replica.c
- Removed the error logging since I use this function in orte_init_stage1 to
check if we have created a cellid yet or not.
ras_types.h & rase_base_node.h
- This was an empty file. moved the orte_ras_node_t from base/ras_base_node.h
to this file.
- Changed the name of orte_ras_base_node_t to orte_ras_node_t to match the
naming mechanisms in place.
ras.h
- Exposed 2 functions:
- node_insert:
This takes a list of orte_ras_base_node_t's and places them in the Node
Segment of the GPR. This is to be used in orte_init_stage1 for singleton
processes, and the hostfile parsing (see rds_hostfile.c). This just puts
in the appropriate API interface to keep from calling the
orte_ras_base_node_insert function directly.
- node_query:
This is used in hostfile parsing. This just puts in the appropriate API
interface to keep from calling the orte_ras_base_node_query function
directly.
- Touched all of the implemented components to add reference to these new
function pointers
ras_base_select.c & ras_base_open.c
- Add and set the global module reference
rds.h
- Exposed 1 function:
- store_resource:
This stores a list of rds_cell_desc_t's to the Resource Segment.
This is used in conjunction with the orte_ras.node_insert function in
both the orte_init_stage1 for singleton processes and rds_hostfile.c
rds_base_select.c & rds_base_open.c
- Add and set the global module reference
rds_hostfile.c
- Added functionality to create a new cellid for each hostfile, placing
each entry in the hostfile into the same cellid. Currently this is
commented out with the cellid hard coded to 0, with the intention of
taking this out once ORTE is able to handle multiple cellid's
- Instead of just adding hosts to the Node Segment via a direct call to
the ras_base_node_insert() function. First add the hosts to the Resource
Segment of the GPR using the orte_rds.store_resource() function then use
the API version of orte_ras.node_insert() to store the hosts on the Node
Segment.
- Add 1 new function pointer to module as required by the API.
rds_hostfile_component.c
- Converted this to use the new MCA parameter registration
orte_init_stage1.c
- It is possible that a cellid was not created yet for the current environment.
So I put in some logic to test if the cellid 0 existed. If it does then
continue, otherwise create the cellid so we can properly interact with the
GPR via the RDS.
- For the singleton case we insert some 'dummy' data into the GPR. The RAS
matches this logic, so I took out the duplicate GPR put logic, and
replaced it with a call to the orte_ras.node_insert() function.
- Further before calling orte_ras.node_insert() in the singleton case,
we also call orte_rds.store_resource() to add the singleton node to the
Resource Segment.
Console:
- Added a bunch of new functions. Still experimenting with many aspects of the
implementation. This is a checkpoint, and has very limited functionality.
- Should not be considered stable at the moment.
This commit was SVN r6813.
- convert MCA params to the new API
- some style and indenting fixes
- look at local shell, and if [new] MCA param
pls_rsh_assume_same_shell is 1, then assume that the remote shell is
the same as the local shell. If pls_rsh_assume_same_shell is 0, do
a probe to figure out what the remote shell is (NOT CURRENTLY
IMPLEMENTED! you'll get a run-time warning if you set this MCA param
to 0).
- if the remote shell is not csh and not bash, then prefix the remote
command with "( ! [ -e ./.profile ] || . ./.profile;" (and suffix it
with ")") so that we run the .profile on the remote side in order to
set PATHs and the like. See the LAM FAQ for details (will someday
be on the Open MPI FAQ:
http://www.lam-mpi.org/faq/category4.php3#question8)
- add a bunch of debugging output if the MCA param pls_rsh_debug is
enabled (or the top-level debug MCA param is enabled)
- add more help messages (and corresponding calls to opal_show_help())
in help-pls-rsh.txt
This commit was SVN r6731.
* rename ompi_malloc to opal_malloc
* rename ompi_numtostr to opal_numtostr
* start of rename of ompi_environ to opal_environ
This commit was SVN r6332.
* rename ompi_basename to opal_basename
* rename ompi bitop functions to opal
* rename ompi_cmd_line to opal_cmd_line
* rename ompi_sizet2int to opal_sizet2int
* rename orte_daemon_init to opal_daemon_init
* rename ompi_few to opal_few
This commit was SVN r6330.
