versions, dates and build names.
Fixes trac:1387
Big thanks to Jeff and Brian for help and oversight.
This commit was SVN r19120.
The following Trac tickets were found above:
Ticket 1387 --> https://svn.open-mpi.org/trac/ompi/ticket/1387
is still to use the C based wrapper compilers (which have many more features
and are more well tested). The Perl compilers are enabled with the option
--enable-script-wrapper-compilers, which also ignores the option
--disable-binaries (ie --enable-script-wrapper-compilers --disable-binaries
will result in perl-based wrapper compilers being installed, but no other
binaries being installed).
This commit was SVN r18655.
such, the commit message back to the master SVN repository is fairly
long.
= ORTE Job-Level Output Messages =
Add two new interfaces that should be used for all new code throughout
the ORTE and OMPI layers (we already make the search-and-replace on
the existing ORTE / OMPI layers):
* orte_output(): (and corresponding friends ORTE_OUTPUT,
orte_output_verbose, etc.) This function sends the output directly
to the HNP for processing as part of a job-specific output
channel. It supports all the same outputs as opal_output()
(syslog, file, stdout, stderr), but for stdout/stderr, the output
is sent to the HNP for processing and output. More on this below.
* orte_show_help(): This function is a drop-in-replacement for
opal_show_help(), with two differences in functionality:
1. the rendered text help message output is sent to the HNP for
display (rather than outputting directly into the process' stderr
stream)
1. the HNP detects duplicate help messages and does not display them
(so that you don't see the same error message N times, once from
each of your N MPI processes); instead, it counts "new" instances
of the help message and displays a message every ~5 seconds when
there are new ones ("I got X new copies of the help message...")
opal_show_help and opal_output still exist, but they only output in
the current process. The intent for the new orte_* functions is that
they can apply job-level intelligence to the output. As such, we
recommend that all new ORTE and OMPI code use the new orte_*
functions, not thei opal_* functions.
=== New code ===
For ORTE and OMPI programmers, here's what you need to do differently
in new code:
* Do not include opal/util/show_help.h or opal/util/output.h.
Instead, include orte/util/output.h (this one header file has
declarations for both the orte_output() series of functions and
orte_show_help()).
* Effectively s/opal_output/orte_output/gi throughout your code.
Note that orte_output_open() takes a slightly different argument
list (as a way to pass data to the filtering stream -- see below),
so you if explicitly call opal_output_open(), you'll need to
slightly adapt to the new signature of orte_output_open().
* Literally s/opal_show_help/orte_show_help/. The function signature
is identical.
=== Notes ===
* orte_output'ing to stream 0 will do similar to what
opal_output'ing did, so leaving a hard-coded "0" as the first
argument is safe.
* For systems that do not use ORTE's RML or the HNP, the effect of
orte_output_* and orte_show_help will be identical to their opal
counterparts (the additional information passed to
orte_output_open() will be lost!). Indeed, the orte_* functions
simply become trivial wrappers to their opal_* counterparts. Note
that we have not tested this; the code is simple but it is quite
possible that we mucked something up.
= Filter Framework =
Messages sent view the new orte_* functions described above and
messages output via the IOF on the HNP will now optionally be passed
through a new "filter" framework before being output to
stdout/stderr. The "filter" OPAL MCA framework is intended to allow
preprocessing to messages before they are sent to their final
destinations. The first component that was written in the filter
framework was to create an XML stream, segregating all the messages
into different XML tags, etc. This will allow 3rd party tools to read
the stdout/stderr from the HNP and be able to know exactly what each
text message is (e.g., a help message, another OMPI infrastructure
message, stdout from the user process, stderr from the user process,
etc.).
Filtering is not active by default. Filter components must be
specifically requested, such as:
{{{
$ mpirun --mca filter xml ...
}}}
There can only be one filter component active.
= New MCA Parameters =
The new functionality described above introduces two new MCA
parameters:
* '''orte_base_help_aggregate''': Defaults to 1 (true), meaning that
help messages will be aggregated, as described above. If set to 0,
all help messages will be displayed, even if they are duplicates
(i.e., the original behavior).
* '''orte_base_show_output_recursions''': An MCA parameter to help
debug one of the known issues, described below. It is likely that
this MCA parameter will disappear before v1.3 final.
= Known Issues =
* The XML filter component is not complete. The current output from
this component is preliminary and not real XML. A bit more work
needs to be done to configure.m4 search for an appropriate XML
library/link it in/use it at run time.
* There are possible recursion loops in the orte_output() and
orte_show_help() functions -- e.g., if RML send calls orte_output()
or orte_show_help(). We have some ideas how to fix these, but
figured that it was ok to commit before feature freeze with known
issues. The code currently contains sub-optimal workarounds so
that this will not be a problem, but it would be good to actually
solve the problem rather than have hackish workarounds before v1.3 final.
This commit was SVN r18434.
some cleanups and standardizations in the various */tools/*/
Makefile.am files. This commit:
* Somewhat simplify the tool Makefile.am's
* Makes the tool Makefile.am's consistent with each other (do similar
actions in similar ways)
* Update the tool Makefile.am's to remove old kruft that was required
by older versions of AM (trunk requires AM >=1.10)
This commit was SVN r17921.
- If one wants to use this solution, remember to unload the project 'orte-restart' which is currently not working for Windows.
This commit was SVN r15680.
* Make orted.1 man page be non-descriptive because it's really an
internal command.
* Re-work the opal_wrapper man page logic a bit so that we can have a
real opal_wrapper.1 installed that says "don't look here -- look at
mpicc (etc.)"
This commit was SVN r15264.
symbols in them and environ is defined only in the final application
(probably in crt1.o). Apple provides a function for getting at the
environment, so use that instead if it's available.
This commit was SVN r14857.
finally brings in functionality that is already on the 1.2 branch, and
was developed and tested in the v1.2ofed branch (and other places).
Short version of new features:
* Support for ibv_fork_init()
* Automatically fill in the openib BTL bandwidth value by
querying the HCA port
* Installdirs functionality
* Fixes to always use -I in the Fortran wrapper compilers (#924)
* Gleb's mpool updates
* Remove some kruft in btl/openib/configure.m4, therefore
fixing the harmless warnings noted in #665
* Bunches of updates to the Linux RPM spec file
I.e., effectively the same thing that r14411 brought to the v1.2
branch.
Also effectively brought in r14432 and r14433 (some fixes on top of
the original r14411 commit to v1.2). Still need to bring in the moral
equivalent of r14445 after this commit (fixes to installdirs).
This commit was SVN r14449.
The following SVN revision numbers were found above:
r14411 --> open-mpi/ompi@83b31314ae
r14432 --> open-mpi/ompi@a48f160595
r14433 --> open-mpi/ompi@68f346d2bc
r14445 --> open-mpi/ompi@13d366b827
* Need to install the help file whenever we install the binary, not when
we make the opal symlinks.
* Exit with non-zero status when language isn't supported
This commit was SVN r13139.
possible things contained in the conditional like other rules are (for
example, a SOURCES rule in a conditional automatically has its files
added to the dist rules, even if that conditional isn't tru when
make dist occurs). So the man files weren't in the tarball.
Put the EXTRA_DIST with the files explicitly listed outside any conditionals
so the man pages always end up in the tarball.
This commit was SVN r12220.
they might require special tools (not sure if sed with multiple -e
arguments is totally portable)
- ignore the opalcc.1 man page. Couldn't do this in the previous
man page commit (r12192) because I was removing opalcc.1 in that
commit.
This commit was SVN r12194.
The following SVN revision numbers were found above:
r12192 --> open-mpi/ompi@581a4b0a4e
- Only install opal{cc,c++} and orte{cc,c++} if configured with
--with-devel-headers. Right now, they are always installed, but
there are no header files installed for either project, so there's
really not much way for a user to actually compile an OPAL / ORTE
application.
- Drop support for opalCC and orteCC. It's a pain to setup all the
symlinks (indeed, they are currently done wrong for opalCC) and
there's no history like there is for mpiCC.
- Change what is currently opalcc.1 to opal_wrapper.1 and add some
macros that get sed'ed so that the man pages appear to be
customized for the given command.
- Install the wrapper data files even if we compiled with
--disable-binaries. This is for the use case of doing multi-lib
builds, where one word size will only have the library built, but
we need both set of wrapper data files to piece together to
activate the multi-lib support in the wrapper compilers.
This commit was SVN r12192.
intall-exec-hook cases. This was accidently removed in r11773.
This commit was SVN r11954.
The following SVN revision numbers were found above:
r11773 --> open-mpi/ompi@c5cc1f0c1a
remove requirements on .la files on wrapper scripts
Ticket: #374
extend compilers to support 32 bit and 64 bit in one version of the wrapper
Submitted by: Dan Lacher
Reviewed by: Rolf Vandevaart
This commit was SVN r11908.
install-exec-hook is not only wrong, it can cause ordering issues such
as trying to put sym links to man pages in directories that do not yet
exist.
This commit was SVN r11893.
opal and orte/ompi man pages -- no need to make local copies of the
man page int he opal tree; just [un]install sym links in the mandir,
like orte/ompi.
This commit was SVN r11820.
The same treatement will happens on all sub-projects. The .h files
have to be C++ compatibles and all symbols with an external visibility
have to get the {PROJECT}_DECLSPEC in front of the prototype.
This commit was SVN r11340.
in San Jose. Allow the configure option --disable-binaries to build OMPI,
but not build or install the support binaries (so basically, just build
the libraries).
This commit was SVN r9777.
installation directories) in configure, the files that depend on this
information are not properly rebuilt. If you need this information,
don't setup a -D in the Makefile.am - instead, include
opal/install_dirs.h.
* Use the : option in AC_CONFIG_FILES to avoid needing to expose that
we are playing around with temporary files with our headers to avoid
rebuilding
* Clean up the version file information a bit, and like the install
directory stuff, make sure that there is a dependency so that
ompi_info gets rebuilt properly when a version number changes.
This commit was SVN r9256.
support for Fortran 90 module flags in the wrapper compilers when I
re-wrote them to be less project-specific. Re-add that support and drop
the ugly install in include hack I had done.
This commit was SVN r9003.
- move files out of toplevel include/ and etc/, moving it into the
sub-projects
- rather than including config headers with <project>/include,
have them as <project>
- require all headers to be included with a project prefix, with
the exception of the config headers ({opal,orte,ompi}_config.h
mpi.h, and mpif.h)
This commit was SVN r8985.
makes illegal free() calls behave in a much more rational way. You'll still
probably die, but your stack trace will not have 3 billion pages of recusion
inside the memory allocator.
* Fix illegal free in the opal_wrapper code. basename() returns a string in a
static buffer, so it shouldn't be free()ed. It also shouldn't be left around
so long, as another call to basename() may whack the returned buffer. So
leave the free and add a strdup() around the basename() call.
* Turn off some unneeded debugging in the opal_wrapper code that would list the
comamnd to be run, regardless of the -showme option.
This commit was SVN r8758.
include help-opal-wrapper.txt in the dist tarball directly. We don't want
to include the wrapper-data.txt files, because we actually want to ship the
.in versions of those files, and AM automatically ships aything needed for
configure's output
This commit was SVN r8711.
