#if defined (c_plusplus)
defined (__cplusplus)
followed by
extern "C" {
and the closing counterpart by BEGIN_C_DECLS and END_C_DECLS.
Notable exceptions are:
- opal/include/opal_config_bottom.h:
This is our generated code, that itself defines BEGIN_C_DECL and
END_C_DECL
- ompi/mpi/cxx/mpicxx.h:
Here we do not include opal_config_bottom.h:
- Belongs to external code:
opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.c
opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.h
- opal/include/opal/prefetch.h:
Has C++ specific macros that are protected:
- Had #if ... } #endif _and_ END_C_DECLS (aka end up with 2x
END_C_DECLS)
ompi/mca/btl/openib/btl_openib.h
- opal/event/event.h has #ifdef __cplusplus as BEGIN_C_DECLS...
- opal/win32/ompi_process.h: had extern "C"\n {...
opal/win32/ompi_process.h: dito
- ompi/mca/btl/pcie/btl_pcie_lex.l: needed to add *_C_DECLS
ompi/mpi/f90/test/align_c.c: dito
- ompi/debuggers/msgq_interface.h: used #ifdef __cplusplus
- ompi/mpi/f90/xml/common-C.xsl: Amend
Tested on linux using --with-openib and --with-mx
The following do not contain either opal_config.h, orte_config.h or
ompi_config.h
(but possibly other header files, that include one of the above):
ompi/mca/bml/r2/bml_r2_ft.h
ompi/mca/btl/gm/btl_gm_endpoint.h
ompi/mca/btl/gm/btl_gm_proc.h
ompi/mca/btl/mx/btl_mx_endpoint.h
ompi/mca/btl/ofud/btl_ofud_endpoint.h
ompi/mca/btl/ofud/btl_ofud_frag.h
ompi/mca/btl/ofud/btl_ofud_proc.h
ompi/mca/btl/openib/btl_openib_mca.h
ompi/mca/btl/portals/btl_portals_endpoint.h
ompi/mca/btl/portals/btl_portals_frag.h
ompi/mca/btl/sctp/btl_sctp_endpoint.h
ompi/mca/btl/sctp/btl_sctp_proc.h
ompi/mca/btl/tcp/btl_tcp_endpoint.h
ompi/mca/btl/tcp/btl_tcp_ft.h
ompi/mca/btl/tcp/btl_tcp_proc.h
ompi/mca/btl/template/btl_template_endpoint.h
ompi/mca/btl/template/btl_template_proc.h
ompi/mca/btl/udapl/btl_udapl_eager_rdma.h
ompi/mca/btl/udapl/btl_udapl_endpoint.h
ompi/mca/btl/udapl/btl_udapl_mca.h
ompi/mca/btl/udapl/btl_udapl_proc.h
ompi/mca/mtl/mx/mtl_mx_endpoint.h
ompi/mca/mtl/mx/mtl_mx.h
ompi/mca/mtl/psm/mtl_psm_endpoint.h
ompi/mca/mtl/psm/mtl_psm.h
ompi/mca/pml/cm/pml_cm_component.h
ompi/mca/pml/csum/pml_csum_comm.h
ompi/mca/pml/dr/pml_dr_comm.h
ompi/mca/pml/dr/pml_dr_component.h
ompi/mca/pml/dr/pml_dr_endpoint.h
ompi/mca/pml/dr/pml_dr_recvfrag.h
ompi/mca/pml/example/pml_example.h
ompi/mca/pml/ob1/pml_ob1_comm.h
ompi/mca/pml/ob1/pml_ob1_component.h
ompi/mca/pml/ob1/pml_ob1_endpoint.h
ompi/mca/pml/ob1/pml_ob1_rdmafrag.h
ompi/mca/pml/ob1/pml_ob1_recvfrag.h
ompi/mca/pml/v/pml_v_output.h
opal/include/opal/prefetch.h
opal/mca/timer/aix/timer_aix.h
opal/util/qsort.h
test/support/components.h
This commit was SVN r21855.
The following SVN revision numbers were found above:
r2 --> open-mpi/ompi@58fdc18855
flex (which, incidentally, emit ''more'' warnings than earlier
versions). Grumble.
This commit was SVN r15166.
The following SVN revision numbers were found above:
r15158 --> open-mpi/ompi@57d09c10f7
addition to my design and testing, it was conceptually approved by
Gil, Gleb, Pasha, Brad, and Galen. Functionally [probably somewhat
lightly] tested by Galen. We may still have to shake out some bugs
during the next few months, but it seems to be working for all the
cases that I can throw at it.
Here's a summary of the changes from that branch:
* Move MCA parameter registration to a new file (btl_openib_mca.c):
* Properly check the retun status of registering MCA params
* Check for valid values of MCA parameters
* Make help strings better
* Otherwise, the only default value of an MCA param that was
changed was max_btls; it went from 4 to -1 (meaning: use all
available)
* Properly prototyped internal functions in _component.c
* Made a bunch of functions static that didn't need to be public
* Renamed to remove "mca_" prefix from static functions
* Call new MCA param registration function
* Call new INI file read/lookup/finalize functions
* Updated a bunch of macros to be "BTL_" instead of "ORTE_"
* Be a little more consistent with return values
* Handle -1 for the max_btls MCA param
* Fixed a free() that should have been an OBJ_RELEASE()
* Some re-indenting
* Added INI-file parsing
* New flex file: btl_openib_ini.l
* New default HCA params .ini file (probably to be expanded over
time by other HCA vendors)
* Added more show_help messages for parsing problems
* Read in INI files and cache the values for later lookup
* When component opens an HCA, lookup to see if any corresponding
values were found in the INI files (ID'ed by the HCA vendor_id
and vendor_part_id)
* Added btl_openib_verbose MCA param that shows what the INI-file
stuff does (e.g., shows which MTU your HCA ends up using)
* Added btl_openib_hca_param_files as a colon-delimited list of INI
files to check for values during startup (in order,
left-to-right, just like the MCA base directory param).
* MTU is currently the only value supported in this framework.
* It is not a fatal error if we don't find params for the HCA in
the INI file(s). Instead, just print a warning. New MCA param
btl_openib_warn_no_hca_params_found can be used to disable
printing the warning.
* Add MTU to peer negotiation when making a connection
* Exchange maximum MTU; select the lesser of the two
This commit was SVN r11182.
