Worker Pool is an object containing/managing a set of UCX workers
and providing access to those workers through a smal interface
to allow Multi-Threaded applicatoins to access multiple HW contexts.
Signed-off-by: Artem Polyakov <artpol84@gmail.com>
We've been fighting the battle of trying to create a regex generator and
parser that can handle arbitrary hostname schemes - without long-term
success. The worst of it is that there is no way of checking to see if
the computed regex is correct short of parsing it and doing a
character-by-character comparison with the original string. Ugh...there
has to be a better solution.
One option is to investigate using 3rd-party regex libraries as
those are coming from communities whose sole focus is resolving that
problem. However, someone would need to spend the time to investigate
it, and we'd have to find a license-friendly implementation.
Another option is to quit beating our heads against the wall and just
compress the information. It won't be as much of a reduction, but we
also won't keep hitting scenarios where things break. In this case, it
seems that "perfection" is definitely the enemy of "good enough".
This PR implements the compression option while retaining the
possibility of people adding regex-generating components. The
compression code used in ORTE is consolidated into the opal/compress
framework. That framework currently held bzip and gzip components for
use in compressing checkpoint files - since we no longer support C/R, I
have .opal_ignore'd those components.
However, I have left the original framework APIs alone in case someone
ever decides to redo C/R. The APIs of interest here are added to the
framework - specifically, the "compress_block" and "decompress_block"
functions. I then moved the ORTE zlib compression code into a new
component in this framework.
Unfortunately, the framework currently is a single-select one - i.e.,
only one active component at a time. Since I .opal_ignore'd the other
two and made the priority of zlib high, this isn't a problem. However,
if someone wants to re-enable bzip/gzip or add another component, they
might need to transition opal/compress to a multi-select framework.
Included changes:
* Consolidate the compression code into the opal/compress framework
* Move the ORTE zlib compression code into a new opal/compress/zlib
component
* Ignore the bzip and gzip components in opal/compress framework
* Add a "compress_base_limit" MCA param to set the threshold above which
we compress data - defaults to 4096 bytes
* Delete stale brucks and rcd components from orte/grpcomm framework
* Delete the orte/regx framework
* Update the launch system to use opal/compress instead of string regex
* Provide a default module if no zlib is available
* Fix some misc multi-node issues
* Properly generate the nidmap in response to a "connection warmup"
message so the remote daemon knows the children it needs to launch.
* Remove stale references to orte_node_regex
* opal_byte_object_t's are not OPAL objects - properly release allocated
memory.
* Set the topology
* Currently only handling homogeneous case
* Update the compress framework files to conform
* Consolidate open/close into one "frame" file. Ensure we open/close the
framework
Signed-off-by: Ralph Castain <rhc@pmix.org>
It never lived up to its purpose (and has caused amorphous indirect
errors such as https://github.com/open-mpi/ompi/issues/2519), so
delete it.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Update the OPAL_CHECK_OFI configury macro:
- Make it safe to call the macro multiple times:
- The checks only execute the first time it is invoked
- Subsequent invocations, it just emits a friendly "checking..."
message so that configure output is sensible/logical
- With the goal of ultimately removing opal/mca/common/ofi, rename the
output variables from OPAL_CHECK_OFI to be
opal_ofi_{happy|CPPFLAGS|LDFLAGS|LIBS}.
- Update btl/ofi, btl/usnic, and mtl/ofi for these new conventions.
- Also, don't use AC_REQUIRE to invoke OPAL_CHECK_OFI because that
causes the macro to be invoked at a fairly random time, which makes
configure stdout confusing / hard to grok.
- Remove a little left-over kruft in OPAL_CHECK_OFI, too (which
resulted in an indenting change, making the change to
opal_check_ofi.m4 look larger than it really is).
Thanks Alastair McKinstry for the report and initial fix.
Thanks Rashika Kheria for the reminder.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Now that all components that use libibverbs are gone, remove
OPAL_CHECK_VERBS and the confusingly-named OPAL_CHECK_OPENFABRICS
(which really just checked for verbs things -- not all the possible
OpenFabrics APIs/libraries).
The only code left in Open MPI that calls verbs is hwloc -- and that's
just the APIs that takes an IBV device and returns topological
information about it. Since nothing in the Open MPI code base uses
the "ibv_*" API any more, we have no need for this hwloc functionality
so we'll even remove the --with-verbs configure options.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
The verbs and verbs_usnic components are now no longer necessary / no
longer used anywhere in the code base.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
So long BTL openib! After many years of (mostly) faithful service, it
is time to remove the openib BTL. It has been fully replaced by other
components, such as the UCX PML and OFI MTL.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
PMIx is removing the --enable-embedded-libevent and
--enable-embedded-hwloc flags as they are confusing users. Instead, we
will use the --enable-embedded-mode to handle both of these options.
Update the embedded configury to handle it.
Signed-off-by: Ralph Castain <rhc@pmix.org>
It doesn't seem like the BTL was using uninitialized pointer. But simply
setting the rcache pointer to NULL after destroying it makes the valgrind
errors go away.
Fixes Issue #6345
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@intel.com>
This commit fixes a bug introduced in
f62d26ddbc. That commit changed how
vader allocates fragment memory from the shared memory
segment. Unfortunately, the values used for the fragment sizes did not
include space for the fragment header. This can cause an overrun of
data from one fragment to the header of the next fragment.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Some macros defined by the embedded hwloc ends up in opal_config.h
because hwloc configury m4 files are slurped into Open MPI. These
macros are not required here, and they might conflict with an external
hwloc install, so simply #undef them in hwloc/external/external.h
after including <opal_config.h> but before including the external
<hwloc.h>.
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
This commit updates btl/vader to use an mpool for handling all shared
memory allocations (frags, fboxes).
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit adds a new mpool base module type: basic. This module can
be used with an opal_free_list_t to allocate space from a
pre-allocated block (such as a shared memory region). The new module
only supports allocation and is not meant for more dynamic use cases
at this time.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Update the OPAL glue configure code to correctly link the opal/pmix4
component to the hwloc used by OMPI instead of defaulting to the
system-level hwloc. Required a corresponding update to the PMIx hwloc
configure code so we treat hwloc the same way we handle libevent in
embedded scenarios.
Signed-off-by: Ralph Castain <rhc@pmix.org>
The PMIX_MODEX and PMIX_INFO_ARRAY macros were removed from the PMIx 3.1 standard.
Open MPI does not really need them (they are only used to be reported as not supported),
so smply #ifdef protect them to support an external PMIx v3.1
Refs. open-mpi/ompi#6247
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
This commit fixes a bug where add_procs can incorrectly return an
error when going through the dynamic add_procs path. This doesn't
happen normally, only when pml/ob1 is not in use.
References #6201
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit contains the following changes:
- Remove the unused opal_test_init/opal_test_finalize
functions. These functions are not used by anything in the code
base or MTT. Tests use opal_init_util/opal_finalize_util instead.
- Get rid of gotos in opal_init_util and opal_init. Replaced them
with a cleaner solution.
- Automatically register cleanup functions in init functions. The
cleanup functions are executed in the reverse order of the
initialization functions. The cleanup functions are run in
opal_finalize_util() before tearing down the class system.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
remove whitespace around '=' when setting btl_uct_LIBS
Thanks Ake Sandgren for reporting this
Refs. open-mpi/ompi#6173
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
