Also detect orted failed-to-start by setting timeout on launch. Currently only used in TM launcher.
Neither detection is enabled by default, but are only active if heartrate is set and/or launch timeout is set. Exception for SLURM as orted failure is always detected and reported.
More info to come on devel list.
This commit was SVN r18555.
1. it depends upon the ability of the native environment to alert us that the orted has died/failed to start. I have included that support for SLURM, but other environments need to be done.
2. for some yet-to-be-determined reason, the message that tells the remaining daemons to "die" isn't getting out of the RML, even though no obvious blockage is standing in the way. Work will continue on resolving that problem. For now, the orteds appear to be exiting on their own quite nicely when they see their HNP "lifeline" disappear.
This represents the best-available fix for ticket #221 so I am closing that ticket at this time.
This commit was SVN r18536.
The former will return a valid item in the list, the latter will return an invalid item that marks the end of the list.
It was happending that when oversubscribing by way of an appfile we would cause a segv because we tried to interpret the invalid item returned by "opal_list_get_end" instead of a valid item. We would then try to write to unallocated memory.
This commit fixes trac:1279
This commit was SVN r18529.
The following Trac tickets were found above:
Ticket 1279 --> https://svn.open-mpi.org/trac/ompi/ticket/1279
such, the commit message back to the master SVN repository is fairly
long.
= ORTE Job-Level Output Messages =
Add two new interfaces that should be used for all new code throughout
the ORTE and OMPI layers (we already make the search-and-replace on
the existing ORTE / OMPI layers):
* orte_output(): (and corresponding friends ORTE_OUTPUT,
orte_output_verbose, etc.) This function sends the output directly
to the HNP for processing as part of a job-specific output
channel. It supports all the same outputs as opal_output()
(syslog, file, stdout, stderr), but for stdout/stderr, the output
is sent to the HNP for processing and output. More on this below.
* orte_show_help(): This function is a drop-in-replacement for
opal_show_help(), with two differences in functionality:
1. the rendered text help message output is sent to the HNP for
display (rather than outputting directly into the process' stderr
stream)
1. the HNP detects duplicate help messages and does not display them
(so that you don't see the same error message N times, once from
each of your N MPI processes); instead, it counts "new" instances
of the help message and displays a message every ~5 seconds when
there are new ones ("I got X new copies of the help message...")
opal_show_help and opal_output still exist, but they only output in
the current process. The intent for the new orte_* functions is that
they can apply job-level intelligence to the output. As such, we
recommend that all new ORTE and OMPI code use the new orte_*
functions, not thei opal_* functions.
=== New code ===
For ORTE and OMPI programmers, here's what you need to do differently
in new code:
* Do not include opal/util/show_help.h or opal/util/output.h.
Instead, include orte/util/output.h (this one header file has
declarations for both the orte_output() series of functions and
orte_show_help()).
* Effectively s/opal_output/orte_output/gi throughout your code.
Note that orte_output_open() takes a slightly different argument
list (as a way to pass data to the filtering stream -- see below),
so you if explicitly call opal_output_open(), you'll need to
slightly adapt to the new signature of orte_output_open().
* Literally s/opal_show_help/orte_show_help/. The function signature
is identical.
=== Notes ===
* orte_output'ing to stream 0 will do similar to what
opal_output'ing did, so leaving a hard-coded "0" as the first
argument is safe.
* For systems that do not use ORTE's RML or the HNP, the effect of
orte_output_* and orte_show_help will be identical to their opal
counterparts (the additional information passed to
orte_output_open() will be lost!). Indeed, the orte_* functions
simply become trivial wrappers to their opal_* counterparts. Note
that we have not tested this; the code is simple but it is quite
possible that we mucked something up.
= Filter Framework =
Messages sent view the new orte_* functions described above and
messages output via the IOF on the HNP will now optionally be passed
through a new "filter" framework before being output to
stdout/stderr. The "filter" OPAL MCA framework is intended to allow
preprocessing to messages before they are sent to their final
destinations. The first component that was written in the filter
framework was to create an XML stream, segregating all the messages
into different XML tags, etc. This will allow 3rd party tools to read
the stdout/stderr from the HNP and be able to know exactly what each
text message is (e.g., a help message, another OMPI infrastructure
message, stdout from the user process, stderr from the user process,
etc.).
Filtering is not active by default. Filter components must be
specifically requested, such as:
{{{
$ mpirun --mca filter xml ...
}}}
There can only be one filter component active.
= New MCA Parameters =
The new functionality described above introduces two new MCA
parameters:
* '''orte_base_help_aggregate''': Defaults to 1 (true), meaning that
help messages will be aggregated, as described above. If set to 0,
all help messages will be displayed, even if they are duplicates
(i.e., the original behavior).
* '''orte_base_show_output_recursions''': An MCA parameter to help
debug one of the known issues, described below. It is likely that
this MCA parameter will disappear before v1.3 final.
= Known Issues =
* The XML filter component is not complete. The current output from
this component is preliminary and not real XML. A bit more work
needs to be done to configure.m4 search for an appropriate XML
library/link it in/use it at run time.
* There are possible recursion loops in the orte_output() and
orte_show_help() functions -- e.g., if RML send calls orte_output()
or orte_show_help(). We have some ideas how to fix these, but
figured that it was ok to commit before feature freeze with known
issues. The code currently contains sub-optimal workarounds so
that this will not be a problem, but it would be good to actually
solve the problem rather than have hackish workarounds before v1.3 final.
This commit was SVN r18434.
* Remove the opal_only option. This was suffering from bit rot, and no one uses it. It can be added back fairly easily if wanted.
* Cleanup metadata interactions at the local level.
* Touch up some of the INC funcitonality (fix typos and a minor ordering issue)
This commit was SVN r18416.
All spawned procs must decode the port of the spawning process so they can communicate in direct routed mode.
This fixes comm_spawn for all routing modes.
This commit was SVN r18395.
Make it all work with comm_spawn in the case of all procs on previously occupied nodes, some new procs on new nodes, and mixtures of the two.
Note: comm_spawn now works with both binomial and linear routed modules. There remains a problem of spawned procs not properly getting updated contact info for the parent proc when run in the direct routed mode...but that's for another day.
This commit was SVN r18385.
If no AMCA parameters are passed then do not send across the path information. Only place it on the command line if the AMCA parameter is set.
This commit was SVN r18382.
http://www.open-mpi.org/community/lists/devel/2008/04/3779.php
{{{
svn merge -r 18276:18380 https://svn.open-mpi.org/svn/ompi/tmp-public/jjh-mca-play .
}}}
Any components not in the trunk, but in one of the effected frameworks *must* be
updated. Contact the list, look at the RFC, or look at the diff for how to do this.
Sorry for the early commit of this, but I wanted to get it in today (per RFC) and
didn't know if I would have a chance later today.
This commit was SVN r18381.
Modify grpcomm xcast so it now uses the selected routed module - eliminates cross-wiring of xcast and routing paths. Suboptimal at the moment, but better implementation is on its way.
Cleanup ignore properties on the new routed components.
This commit was SVN r18377.
Add two new API's to the routed framework - stub them out so that collaborators can work on them in various components without conflicts.
Remove a "finalize" from the select function that could cause problems as the component had not had its initialize called yet.
This commit was SVN r18369.
Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs.
Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node.
This commit was SVN r18338.
The problem was caused by a bad ordering between the restart of the ORTE level tcp connections (in the OOB - out-of-band communication) and the Open MPI level tcp connections (BTLs). Before this commit ORTE would shutdown and restart the OOB completely before the OMPI level restarted its tcp connections. What would happen is that a socket descriptor used by the OMPI level on checkpoint was assigned to the ORTE level on restart. But the OMPI level had no knowledge that the socket descriptor it was previously using has been recycled so it closed it on restart. This caused the ORTE level to break as the newly created socket descriptor was closed without its knowledge.
The fix is to have the OMPI level shutdown tcp connections, allow the ORTE level to restart, and then allow the OMPi level to restart its connections. This seems obvious, and I'm surprised that this bug has not cropped up sooner. I'm confident that this specific problem has been fixed with this commit.
Thanks to Eric Roman and Tamer El Sayed for their help in identifying this problem, and patience while I was fixing it.
* Add a new state {{{OPAL_CRS_RESTART_PRE}}}. This state identifies when we are on the down slope of the INC (finalize-like) which is useful when you want to close, but not reopen a component set for fear of interfering with a lower level.
* Use this new state in OMPI level coordination. Here we want to make sure to play well with both the OMPI/BTL/TCP and ORTE/OOB/TCP components.
* Update ft_event functions in PML and BML to handle the new restart state.
* Add an additional flag to the error output in OOB/TCP so we can see what the socket descriptor was on failure as this can be helpful in debugging.
This commit was SVN r18276.
