- added synonim to common ucx variables to allow
to print it in opal_info -a
Signed-off-by: Sergey Oblomov <sergeyo@mellanox.com>
(cherry picked from commit e00f7a68ba)
Since progress entries array is globally allocated, it is susceptible
to race conditions when using multi-threaded applications. Allocating it
on the stack resolves any potential races as it is thread local by default.
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@intel.com>
(cherry picked from commit ed2343034d)
Thanks to Stefan Teleman for identifying this issue and providing a
proof-of-concept patch. We ended up revamping the detection of
128-bit atomics to reduce duplicated code and be a slightly simpler --
albiet perhaps a bit more verbose -- approach:
- Remove the --enable-cross-* options; they were confusing and
unnecessary.
- Always try to compile / link the compiler-intrinsic 128-bit atomic
functions.
- Strengthen the C tests we use to be more robust.
- Use m4 to avoid duplicating the C tests multiple times in the .m4
source.
- If not cross-compiling, try to run a short test and ensure that they
actually work (as of Aug 2018, there's at least one platform where
they don't: clang 6 on ARM64). If cross-compiling, just assume that
they work.
- Add more comments about what is going on with all the tests; it's
tricky stuff. Our Future Selves will thank us.
Signed-off-by: George Bosilca <bosilca@icl.utk.edu>
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
(cherry picked from commit ff9df91887)
file_delete triggers underneath the hood the full component selection
logic, since we do not have a file handle, just a file name.
As part of the selection logic, we have to however initiate the
framework-open of the fs component in case of ompio, since ompio
will call the delete function of the selected fs componentn, which
is based on the file system where the file is located.
This was not handled correctly so far. The problem however only
shows up if the first I/O operatin to be executed is a file_delete,
other wise the file_open will lead to the correct opening and initialization
of the fs framework. This commit ensures that we do the right thing
even if file_delete is the first file I/O operation in the application.
Fixes issue #5611
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
Since version hwloc 2.0.0 has a new organization of NUMA nodes on the
topology tree. This commit adds the detection of local NUMA object for
hwloc => 2.0.0, which fixes the procs bindings policy for rmaps mindist
component.
Signed-off-by: Boris Karasev <karasev.b@gmail.com>
(cherry picked from commit e5291ccc34)
In some scenarios, we can have a daemon sharing the node with mpirun. In
those cases, we need to avoid race conditions in cleanup
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
(cherry picked from commit 8d1be27a1e)
If an application opens a file for reading from multiple processes
using MPI_COMM_SELF (or another communicator that has distinct
process groups but the same comm-id, as can happen as the result
of comm_split), the naming chosen for the lockedfile or the mmapped
file used by the sharedfp/sm component would collide. This patch
ensures that the filename is different by integrating the process id
of rank 0 for each sub-communicator.
This fixes one aspect of the problem reported in github issue 5593
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
Thanks Zoltan Mizsei for bringing this to our attention.
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
(cherry picked from commit open-mpi/ompi@a02be5e91a)
Per suggestion by @bangerth, allow mpirun to execute as root if two
envars are set to specific values
Per conversation with @jsquyres, name the envars OMPI_ALLOW_RUN_AS_ROOT
and OMPI_ALLOW_RUN_AS_ROOT_CONFIRM
Fixes#4451
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
(cherry picked from commit 7f1444d5f9)
the sharedfp component has to be selected and opened before
we set the default file view during file_open. Otherwise
there is a sperious error message from the sharefp_file_seek
operation that is called during the file_set_view.
Fixes Issue #5560
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
The write memory barrier was intended to precede setting a fast-box
header but instead follows it. This commit moves the memory barrier to
the intended location.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
(cherry picked from commit dca3516765)
The Autoconf AC_CONFIG_* macros can only be instantiated exacly once
for any given file, *and* they must be in a code execution path at run
time for the target file to be generated at the end of configure.
For example, if you want to generate file ABC at the end of configure,
you must invoke the AC_CONFIG_FILES(ABC) macro in a code path that
will get executed when configure is run.
That's pretty straightforward.
What's not straightforward is two corner cases:
1. You cannot invoke the AC_CONFIG_FILES(ABC) macro for the same file
more than once. If you do, autoreconf will fail (even before you
can run configure).
2. If AC_CONFIG_FILES(ABC) is not in a code path that is executed by
configure, the file ABC is not registered properly, and ABC will
not be generated at the end of configure.
This applies to hwloc because hwloc's HWLOC_SETUP_CORE macro calls
both AC_CONFIG_FILES and AC_CONFIG_HEADER to setup its Makefiles
(etc.) so that targets like "make distclean" and "make distcheck" will
work properly. Hence, we *have* to invoke HWLOC_SETUP_CORE.
However, the MCA_opal_hwloc_hwloc201_CONFIG macro has a few side
effects. It would be nice to do able to do something like this:
```
if hwloc:extern is going to be used:
Invoke minimal HWLOC_SETUP_CORE (with no side effects)
else
Invoke full HWLOC_SETUP_CORE (with side effects)
fi
```
But we can't, because autoreconf will detect that AC_CONFIG_FILES has
been invoked on the same files more than once (regardless of whether
those code paths will be executed at run time or not). Kaboom.
Similarly, we can't do this:
```
if hwloc:extern is not going to be used:
Invoke full HWLOC_SETUP_CORE (with side effects)
fi
```
Because then hwloc's AC_CONFIG_FILES won't be registered properly when
hwloc:external *is* used (i.e., when the HWLOC_SETUP_CORE macro is not
in a code path that is executed at run time), and targets like "make
distclean" will fail because hwloc's Makefiles won't have been setup.
Kaboom.
But remember that the hwloc framework is a bit special: there will
only ever be 2 comoponents: external and internal. External is
guaranteed to be configured first because of its priority. So the
internal component (i.e., this component) immediately knows if it is
going to be used or not based on whether the external component
configuration succeeded or failed.
Specifically: regardless of whether the internal component (i.e., this
component) is going to be used, we have to invoke HWLOC_SETUP_CORE.
But we can manage the side effects: allow the side effects when
this/internal component is going to be used, and avoid the side
effects when this/internal component is not going to be used.
This is a little less clean than I would have liked, but because of
Autoconf's oddity about its AC_CONFIG_* macros, this is the only
solution I could come up with.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
(cherry picked from commit 01e4570af7)
In order to make "make distclean" (and friends) work, we need to
*always* invoke the embedded configure script -- even if we know that
we're not going to use this component.
But in cases where we know we're not going to use this component, we
also need to avoid the side effects of the code path that is used when
we *do* want to use this component. So split the two possibilities
into two different macros:
1. MCA_opal_event_libevent2022_FAKE_CONFIG: which does almost nothing
except invoke the underlying "configure" script.
2. MCA_opal_event_libevent2022_REAL_CONFIG: which does all the real
work (including invoking the underlying "configure" script).
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
(cherry picked from commit 69aa46e167)
Put argument to AM_CONDITIONAL inside []. No code or logic changes.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
(cherry picked from commit 80df3f040b)
We know that event:external will be configured first (because of its
priority). Take advantage of that here in libevent2022 by having it
refuse to configure / politely fail if event:external succeeded.
Also print out some additional lines in configure output indicating
what is going on (i.e., event:external succeeded, so this component
will be skipped, or event:external failed, so this component will be
used).
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
(cherry picked from commit b063cb6b0f)
We know that hwloc:external will be configured first (because of its
priority). Take advantage of that here in hwloc201 by having it
refuse to configure / politely fail if hwloc:external succeeded.
Also print out some additional lines in configure output indicating
what is going on (i.e., hwloc:external succeeded, so this component
will be skipped, or hwloc:external failed, so this component will be
used).
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
(cherry picked from commit 4e5f432786)
In the cleanup phase, it is possible for PtlMEUnlink() to return
PTL_IN_USE if the NIC is not done with the ME. This should not
be considered an error. This commit adds a retry loop around
PtlMEUnlink().
In some cases, the return value of PtlMEUnlink() and PtlCTFree()
was not checked at all. Check them with the same retry loop as
above.
Signed-off-by: Todd Kordenbrock <thkgcode@gmail.com>
(cherry picked from commit f3f2a826b4)
-Updated blocking send to directly call functionality and
set completion events expected to 0 initally. This allows for optimization for
providers that support fi_tinject up to larger sizes. This also reduces
latency on running the OFI mtl with smaller sizes without requiring
calls to progress given fi_tinject is required to complete the messaging
before returning and will not create any events in the Completion Queue.
-Updated non-blocking send to directly call fi_tsend and avoid calling
fi_tinject as the functionality should not wait on completions. This
resolves a bug where applications calling MPI_Isend can overrun the
TX buffer with small (inject) messages causing a deadlock. In addition
this improves performance in message rates by preventing
waiting on any size message to complete in non-blocking send messages.
-Created common ompi_mtl_ofi_ssend_recv function to post the ssend recv
which is common between isend and send code paths.
Signed-off-by: Spruit, Neil R <neil.r.spruit@intel.com>
(cherry picked from commit 7dc8c8ba3f)
When romio314 was first pulled in an extra patch was applied to it, see commit
92f6c7c1e2. Most of that patch is already present
in vanilla romio321, but the fix for MPIO_DATATYPE_ISCOMMITTED() isn't.
If that macro doesn't set err_ then some paths end up with a variable being used
uninitialized. In particular you can trace through romio321/romio/mpi-io/read.c
to see what happens with error_code. It's an uninitialized stack variable that goes
through three MPIO_CHECK_* macros none of which set it. The macros consistently set
error_code to a failure if they see something wrong, but they don't consistently
set it to success when things are fine.
And then in the last macro MPIO_CHECK_DATATYPE it tries to look at the value
of error_code that was never set.
Signed-off-by: Mark Allen <markalle@us.ibm.com>
(cherry picked from commit f413ef6b14)
