Standardize the handling of the orte launch agent option across PLMs. This has been a consistent complaint I have received - each PLM would register its own MCA param to get input on the launch agent for remote nodes (in fact, one or two didn't, but most did). This would then get handled in various and contradictory ways.
Some PLMs would accept only a one-word input. Others accepted multi-word args such as "valgrind orted", but then some would error by putting any prefix specified on the cmd line in front of the incorrect argument.
For example, while using the rsh launcher, if you specified "valgrind orted" as your launch agent and had "--prefix foo" on you cmd line, you would attempt to execute "ssh foo/valgrind orted" - which obviously wouldn't work.
This was all -very- confusing to users, who had to know which PLM was being used so they could even set the right mca param in the first place! And since we don't warn about non-recognized or non-used mca params, half of the time they would wind up not doing what they thought they were telling us to do.
To solve this problem, we did the following:
1. removed all mca params from the individual plms for the launch agent
2. added a new mca param "orte_launch_agent" for this purpose. To further simplify for users, this comes with a new cmd line option "--launch-agent" that can take a multi-word string argument. The value of the param defaults to "orted".
3. added a PLM base function that processes the orte_launch_agent value and adds the contents to a provided argv array. This can subsequently be harvested at-will to handle multi-word values
4. modified the PLMs to use this new function. All the PLMs except for the rsh PLM required very minor change - just called the function and moved on. The rsh PLM required much larger changes as - because of the rsh/ssh cmd line limitations - we had to correctly prepend any provided prefix to the correct argv entry.
5. added a new opal_argv_join_range function that allows the caller to "join" argv entries between two specified indices
Please let me know of any problems. I tried to make this as clean as possible, but cannot compile all PLMs to ensure all is correct.
This commit was SVN r19097.
After much work by Jeff and myself, and quite a lot of discussion, it has become clear that we simply cannot resolve the infinite loops caused by RML-involved subsystems calling orte_output. The original rationale for the change to orte_output has also been reduced by shifting the output of XML-formatted vs human readable messages to an alternative approach.
I have globally replaced the orte_output/ORTE_OUTPUT calls in the code base, as well as the corresponding .h file name. I have test compiled and run this on the various environments within my reach, so hopefully this will prove minimally disruptive.
This commit was SVN r18619.
such, the commit message back to the master SVN repository is fairly
long.
= ORTE Job-Level Output Messages =
Add two new interfaces that should be used for all new code throughout
the ORTE and OMPI layers (we already make the search-and-replace on
the existing ORTE / OMPI layers):
* orte_output(): (and corresponding friends ORTE_OUTPUT,
orte_output_verbose, etc.) This function sends the output directly
to the HNP for processing as part of a job-specific output
channel. It supports all the same outputs as opal_output()
(syslog, file, stdout, stderr), but for stdout/stderr, the output
is sent to the HNP for processing and output. More on this below.
* orte_show_help(): This function is a drop-in-replacement for
opal_show_help(), with two differences in functionality:
1. the rendered text help message output is sent to the HNP for
display (rather than outputting directly into the process' stderr
stream)
1. the HNP detects duplicate help messages and does not display them
(so that you don't see the same error message N times, once from
each of your N MPI processes); instead, it counts "new" instances
of the help message and displays a message every ~5 seconds when
there are new ones ("I got X new copies of the help message...")
opal_show_help and opal_output still exist, but they only output in
the current process. The intent for the new orte_* functions is that
they can apply job-level intelligence to the output. As such, we
recommend that all new ORTE and OMPI code use the new orte_*
functions, not thei opal_* functions.
=== New code ===
For ORTE and OMPI programmers, here's what you need to do differently
in new code:
* Do not include opal/util/show_help.h or opal/util/output.h.
Instead, include orte/util/output.h (this one header file has
declarations for both the orte_output() series of functions and
orte_show_help()).
* Effectively s/opal_output/orte_output/gi throughout your code.
Note that orte_output_open() takes a slightly different argument
list (as a way to pass data to the filtering stream -- see below),
so you if explicitly call opal_output_open(), you'll need to
slightly adapt to the new signature of orte_output_open().
* Literally s/opal_show_help/orte_show_help/. The function signature
is identical.
=== Notes ===
* orte_output'ing to stream 0 will do similar to what
opal_output'ing did, so leaving a hard-coded "0" as the first
argument is safe.
* For systems that do not use ORTE's RML or the HNP, the effect of
orte_output_* and orte_show_help will be identical to their opal
counterparts (the additional information passed to
orte_output_open() will be lost!). Indeed, the orte_* functions
simply become trivial wrappers to their opal_* counterparts. Note
that we have not tested this; the code is simple but it is quite
possible that we mucked something up.
= Filter Framework =
Messages sent view the new orte_* functions described above and
messages output via the IOF on the HNP will now optionally be passed
through a new "filter" framework before being output to
stdout/stderr. The "filter" OPAL MCA framework is intended to allow
preprocessing to messages before they are sent to their final
destinations. The first component that was written in the filter
framework was to create an XML stream, segregating all the messages
into different XML tags, etc. This will allow 3rd party tools to read
the stdout/stderr from the HNP and be able to know exactly what each
text message is (e.g., a help message, another OMPI infrastructure
message, stdout from the user process, stderr from the user process,
etc.).
Filtering is not active by default. Filter components must be
specifically requested, such as:
{{{
$ mpirun --mca filter xml ...
}}}
There can only be one filter component active.
= New MCA Parameters =
The new functionality described above introduces two new MCA
parameters:
* '''orte_base_help_aggregate''': Defaults to 1 (true), meaning that
help messages will be aggregated, as described above. If set to 0,
all help messages will be displayed, even if they are duplicates
(i.e., the original behavior).
* '''orte_base_show_output_recursions''': An MCA parameter to help
debug one of the known issues, described below. It is likely that
this MCA parameter will disappear before v1.3 final.
= Known Issues =
* The XML filter component is not complete. The current output from
this component is preliminary and not real XML. A bit more work
needs to be done to configure.m4 search for an appropriate XML
library/link it in/use it at run time.
* There are possible recursion loops in the orte_output() and
orte_show_help() functions -- e.g., if RML send calls orte_output()
or orte_show_help(). We have some ideas how to fix these, but
figured that it was ok to commit before feature freeze with known
issues. The code currently contains sub-optimal workarounds so
that this will not be a problem, but it would be good to actually
solve the problem rather than have hackish workarounds before v1.3 final.
This commit was SVN r18434.
Restore the "do-not-launch" functionality so users can test a mapping without launching it.
Add a "do-not-resolve" cmd line flag to mpirun so the opal/util/if.c code does not attempt to resolve network addresses, thus enabling a user to test a hostfile mapping without hanging on network resolve requests.
Add a function to hostfile to generate an ordered list of host names from a hostfile
This commit was SVN r18190.
environment variables in a consistent manner. These functions
retrieve the user and the temporary directories (based on the
system).
This commit was SVN r17815.
seemed to be the right thing(tm), but broke the Sun Studio C++
compiler under Linux (ticket 747).
This patch should allow inclusion into C and C++ from other header
files without problems.
This commit was SVN r17792.
The following SVN revision numbers were found above:
r17488 --> open-mpi/ompi@d53131f261
r17504 --> open-mpi/ompi@b22e8e7567
This patch fixes the segfault, so closing the ticket might be possible.
It's a very conservative patch. Perhaps the freeaddrinfo spec says that
it will never allocate res in case of errors, but for now, I neither
have the spec nor the will to rely on it.
This commit was SVN r17150.
* General TCP cleanup for OPAL / ORTE
* Simplifying the OOB by moving much of the logic into the RML
* Allowing the OOB RML component to do routing of messages
* Adding a component framework for handling routing tables
* Moving the xcast functionality from the OOB base to its own framework
Includes merge from tmp/bwb-oob-rml-merge revisions:
r15506, r15507, r15508, r15510, r15511, r15512, r15513
This commit was SVN r15528.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r15506
r15507
r15508
r15510
r15511
r15512
r15513
asprintf and friends. This is not a failsafe; there are many cases
where this check will not be used. But at least it's something...
This commit was SVN r15500.
opal_net_get_hostname() rather than malloc, because no one was freeing
the buffer and the common use case was for printfs, where calling
free is a pain.
This commit was SVN r15494.
VxWorks. Still some issues remaining, I'm sure.
Refs trac:1010
This commit was SVN r15320.
The following Trac tickets were found above:
Ticket 1010 --> https://svn.open-mpi.org/trac/ompi/ticket/1010
flex (which, incidentally, emit ''more'' warnings than earlier
versions). Grumble.
This commit was SVN r15166.
The following SVN revision numbers were found above:
r15158 --> open-mpi/ompi@57d09c10f7
symbols in them and environ is defined only in the final application
(probably in crt1.o). Apple provides a function for getting at the
environment, so use that instead if it's available.
This commit was SVN r14857.
* Move ipv6comat.h code into opal_config_bottom.h and change into some
more intelligent testing of structures
* Change opal's if interface to use sockaddr instead of sockaddr_storage,
as the RFCs suggest we do
* Move the networking code in opal that isn't directly related to if
detection into net.h
* Add quicky function to get the port out of either a sockaddr_in
or sockaddr_in6, saving a bunch of code in the oob.
* Update TCP oob and btl with new interface
This commit was SVN r14679.
because the Sun Studio compiler did not recognize __const.
This commit fixes trac:1011.
This commit was SVN r14558.
The following Trac tickets were found above:
Ticket 1011 --> https://svn.open-mpi.org/trac/ompi/ticket/1011
- make opal_sockaddr2str() take a sockaddr_storage instead of a sockaddr_in6
so that it works for IPv4 and IPv6 addresses, and remove a whole bunch
of #ifs in the OOOB code.
- Fix a compiler warning in the TCP BTL due to run-time determined
array size by making it a dynamicly allocated array.
- Fix the unpacking code of IPv4 addresses when using IPv6 support, so
that the address is in the correct location (instead of in an IPv6
structure, use an IPv4 structure). Refs trac:1005.
This commit was SVN r14514.
The following Trac tickets were found above:
Ticket 1005 --> https://svn.open-mpi.org/trac/ompi/ticket/1005
finally brings in functionality that is already on the 1.2 branch, and
was developed and tested in the v1.2ofed branch (and other places).
Short version of new features:
* Support for ibv_fork_init()
* Automatically fill in the openib BTL bandwidth value by
querying the HCA port
* Installdirs functionality
* Fixes to always use -I in the Fortran wrapper compilers (#924)
* Gleb's mpool updates
* Remove some kruft in btl/openib/configure.m4, therefore
fixing the harmless warnings noted in #665
* Bunches of updates to the Linux RPM spec file
I.e., effectively the same thing that r14411 brought to the v1.2
branch.
Also effectively brought in r14432 and r14433 (some fixes on top of
the original r14411 commit to v1.2). Still need to bring in the moral
equivalent of r14445 after this commit (fixes to installdirs).
This commit was SVN r14449.
The following SVN revision numbers were found above:
r14411 --> open-mpi/ompi@83b31314ae
r14432 --> open-mpi/ompi@a48f160595
r14433 --> open-mpi/ompi@68f346d2bc
r14445 --> open-mpi/ompi@13d366b827
that makes sense or not, it is allowed and it is done). Remove the compiler
hint that the argument will never be NULL. Fixes a segfault in oob init
code when opal_argv_split() was called with a NULL first argument.
This commit was SVN r14440.
VXWorks, for example). Checked with George before committing this to
ensure that nothing broke on Windows -- he said it was ok.
This commit was SVN r14388.
__opal_attribute_nonnull__, __opal_attribute_warn_unused_result__,
__opal_attribute_malloc__, __opal_attribute_sentinel__ and
__opal_attribute_format__
This commit was SVN r14078.
builds, so disable it there
* On 10.4.8 (and possibly others), siginfo is NULL in the signal
callback on 64 bit Intel builds, so account for that in the signal
callback.
This commit was SVN r14045.
- mca_base_param_file_prefix
(Default: NULL)
This is the fullname of the "-am" mpirun option. Used to specify a ':'
separated list of AMCA parameter set files.
- mca_base_param_file_path
(Default: $SYSCONFDIR/amca-param-sets/:$CWD)
The path to search for AMCA files with relative paths. A warning will be
printed if the AMCA file cannot be found.
* Added a new function "mca_base_param_recache_files" the re-reads the file
configurations. This is used internally to help bootstrap the MCA system.
* Added a new orterun/mpirun command line option '-am' that aliases for the
mca_base_param_file_prefix MCA parameter
* Exposed the opal_path_access function as it is generally useful in other
places in the code.
* New function "opal_cmd_line_make_opt_mca" which will allow you to append a
new command line option with MCA parameter identifiers to set at the same
time. Previously this could only be done at command line declaration time.
* Added a new directory under the $pkgdatadir named "amca-param-sets" where all
the 'shipped with' Open MPI AMCA parameter sets are placed. This is the first
place to search for AMCA sets with relative paths.
* An example.conf AMCA parameter set file is located in
contrib/amca-param-sets/.
* Jeff Squyres contributed an OpenIB AMCA set for benchmarking.
Note: You will need to autogen with this commit as it adds a configure param.
Sorry :(
This commit was SVN r13867.
Add new function opal_get_num_processors() that will return the number
of processors on the local host. Does the Right thing in POSIX
environments (to include a special case for OS X), and will shortly do
the Right Thing for Windows (this commit includes a change to
configure, so I wanted to get that in before the US workday -- the
Windows code can some shortly because it won't involve configury
changes).
This commit was SVN r13506.
The following Trac tickets were found above:
Ticket 853 --> https://svn.open-mpi.org/trac/ompi/ticket/853
comment explaining the patch in the patch.
Refs trac:574
This commit was SVN r13276.
The following Trac tickets were found above:
Ticket 574 --> https://svn.open-mpi.org/trac/ompi/ticket/574
environment variable, so it's not so useful (arg!). Instead, get the
hostname during opal_init(). Don't want to call gethostname() during
the signal handler. While we're at it, only print the machine name
so that the output isn't so wide
Refs trac:538
This commit was SVN r12886.
The following Trac tickets were found above:
Ticket 538 --> https://svn.open-mpi.org/trac/ompi/ticket/538
* Print out header that a signal was received
Refs trac:538
This commit was SVN r12884.
The following Trac tickets were found above:
Ticket 538 --> https://svn.open-mpi.org/trac/ompi/ticket/538
* Have darwin backtrace code return an error when buffer() is
called, since it is not imnplemented
* Print out hostname & pid when giving signal information
* If backtrace_buffer() is implemented, use that instead of
backtrace_print() and prefix stacktrace with the hostname
* Make the signal information printed be more user friendly
* If we're using the backtrace_buffer() code, don't print
the last two functions (which will be show_stackframe()
then backtrace_buffer()) so that users won't keep thinking
the error occurred inside Open MPI (sneaky, yes...)
Refs trac:538
This commit was SVN r12883.
The following Trac tickets were found above:
Ticket 538 --> https://svn.open-mpi.org/trac/ompi/ticket/538
1. For OS's without the dirent.d_type field, we were potentially
not initializing a filename string. This could result in a
directory not being cleaned up.
2. Potential memory leaks in filename strings that were allocated.
Refs trac:678
This commit was SVN r12853.
The following Trac tickets were found above:
Ticket 678 --> https://svn.open-mpi.org/trac/ompi/ticket/678
size and diplacement of data-type. After this patch all data can contain size_t bytes
and the displacements are defined as ptrdiff_t. All of the files I was able to compile
have been modified to match this requirement.
This commit was SVN r12146.
I was running into where if a string in the argument list contains a printf
escape sequence, we would segfault. In particular, I was using opal_output
to print the environment and had something like:
LESSOPEN=|/usr/bin/lesspipe.sh %s
in my environment. So I called opal_output(0, "%s", environ[i]) and
got a segfault because the fprintf tried to expand the %s in the
environment variable
This commit was SVN r12094.
the data is in network byte order and we want it in host byte order so
we can modify it. The big issue, though, is that 127 is 0x7F, not 0x74,
so there was the possibility of false positives with this test...
This commit was SVN r11919.
__DARWIN_ALIGN_POWER define from the last release of the OS X compiler
toolchain. The bug in net/if.h, however, is still there. So look
for the hints that we're on a 64 bit Apple PowerPC instead.
* If we don't find a buffer size that works by 10MB, we're never
going to. So add some code to limit the buffer size we'll try
so that we don't fall into an infinite loop
* Detect errors in opal_ifcount in the oob init code
Refs trac:420
This commit was SVN r11825.
The following Trac tickets were found above:
Ticket 420 --> https://svn.open-mpi.org/trac/ompi/ticket/420
the initialization in the start of the function is going to remain for
the life of the function is erroneous. Need to initialize before
using in the snprintf() call.
Refs trac:340
This commit was SVN r11781.
The following Trac tickets were found above:
Ticket 340 --> https://svn.open-mpi.org/trac/ompi/ticket/340
opal_dirname have the same behavior all the time. It does not modify
the original string and it returns a freshly allocated string.
This commit was SVN r11443.
The same treatement will happens on all sub-projects. The .h files
have to be C++ compatibles and all symbols with an external visibility
have to get the {PROJECT}_DECLSPEC in front of the prototype.
This commit was SVN r11340.
range of OS friendly path management functions, such as opal_basename
opal_dirname. They should always be used instead of basename and
dirname. There are several functions which allow us to create paths
that are compatible with the OS.
The OPAL_ENV_SEP define should be used (instead of ':') when a env
variable is splitted.
This commit was SVN r11336.
Windows version for the libevent. The one they provide is more than
innapropriate for what we need (without talking about the fact that
the code is just plain wrong).
This commit was SVN r11329.
different macros, one for each project. Therefore, now we have OPAL_DECLSPEC,
ORTE_DECLSPEC and OMPI_DECLSPEC. Please use them based on the sub-project.
This commit was SVN r11270.
