Many of the OPAL_ENABLE_FT should be OPAL_ENABLE_FT_CR, so fix those.
The OPAL Layer INC should call opal_output on restart so that it can refresh the string it prints to reflect the current pid/hostname which may have changed.
This commit was SVN r22824.
OMPI_* to OPAL_*. This allows opal layer to be used more independent
from the whole of ompi.
NOTE: 9 "svn mv" operations immediately follow this commit.
This commit was SVN r21180.
Check for error in fcntl, as we depend on close-on-exec,
F_SETFD will result in -1 in case of error (stored in errno).
To not have a follow-up warning about not freeing filename, move up.
This commit was SVN r21171.
After much work by Jeff and myself, and quite a lot of discussion, it has become clear that we simply cannot resolve the infinite loops caused by RML-involved subsystems calling orte_output. The original rationale for the change to orte_output has also been reduced by shifting the output of XML-formatted vs human readable messages to an alternative approach.
I have globally replaced the orte_output/ORTE_OUTPUT calls in the code base, as well as the corresponding .h file name. I have test compiled and run this on the various environments within my reach, so hopefully this will prove minimally disruptive.
This commit was SVN r18619.
such, the commit message back to the master SVN repository is fairly
long.
= ORTE Job-Level Output Messages =
Add two new interfaces that should be used for all new code throughout
the ORTE and OMPI layers (we already make the search-and-replace on
the existing ORTE / OMPI layers):
* orte_output(): (and corresponding friends ORTE_OUTPUT,
orte_output_verbose, etc.) This function sends the output directly
to the HNP for processing as part of a job-specific output
channel. It supports all the same outputs as opal_output()
(syslog, file, stdout, stderr), but for stdout/stderr, the output
is sent to the HNP for processing and output. More on this below.
* orte_show_help(): This function is a drop-in-replacement for
opal_show_help(), with two differences in functionality:
1. the rendered text help message output is sent to the HNP for
display (rather than outputting directly into the process' stderr
stream)
1. the HNP detects duplicate help messages and does not display them
(so that you don't see the same error message N times, once from
each of your N MPI processes); instead, it counts "new" instances
of the help message and displays a message every ~5 seconds when
there are new ones ("I got X new copies of the help message...")
opal_show_help and opal_output still exist, but they only output in
the current process. The intent for the new orte_* functions is that
they can apply job-level intelligence to the output. As such, we
recommend that all new ORTE and OMPI code use the new orte_*
functions, not thei opal_* functions.
=== New code ===
For ORTE and OMPI programmers, here's what you need to do differently
in new code:
* Do not include opal/util/show_help.h or opal/util/output.h.
Instead, include orte/util/output.h (this one header file has
declarations for both the orte_output() series of functions and
orte_show_help()).
* Effectively s/opal_output/orte_output/gi throughout your code.
Note that orte_output_open() takes a slightly different argument
list (as a way to pass data to the filtering stream -- see below),
so you if explicitly call opal_output_open(), you'll need to
slightly adapt to the new signature of orte_output_open().
* Literally s/opal_show_help/orte_show_help/. The function signature
is identical.
=== Notes ===
* orte_output'ing to stream 0 will do similar to what
opal_output'ing did, so leaving a hard-coded "0" as the first
argument is safe.
* For systems that do not use ORTE's RML or the HNP, the effect of
orte_output_* and orte_show_help will be identical to their opal
counterparts (the additional information passed to
orte_output_open() will be lost!). Indeed, the orte_* functions
simply become trivial wrappers to their opal_* counterparts. Note
that we have not tested this; the code is simple but it is quite
possible that we mucked something up.
= Filter Framework =
Messages sent view the new orte_* functions described above and
messages output via the IOF on the HNP will now optionally be passed
through a new "filter" framework before being output to
stdout/stderr. The "filter" OPAL MCA framework is intended to allow
preprocessing to messages before they are sent to their final
destinations. The first component that was written in the filter
framework was to create an XML stream, segregating all the messages
into different XML tags, etc. This will allow 3rd party tools to read
the stdout/stderr from the HNP and be able to know exactly what each
text message is (e.g., a help message, another OMPI infrastructure
message, stdout from the user process, stderr from the user process,
etc.).
Filtering is not active by default. Filter components must be
specifically requested, such as:
{{{
$ mpirun --mca filter xml ...
}}}
There can only be one filter component active.
= New MCA Parameters =
The new functionality described above introduces two new MCA
parameters:
* '''orte_base_help_aggregate''': Defaults to 1 (true), meaning that
help messages will be aggregated, as described above. If set to 0,
all help messages will be displayed, even if they are duplicates
(i.e., the original behavior).
* '''orte_base_show_output_recursions''': An MCA parameter to help
debug one of the known issues, described below. It is likely that
this MCA parameter will disappear before v1.3 final.
= Known Issues =
* The XML filter component is not complete. The current output from
this component is preliminary and not real XML. A bit more work
needs to be done to configure.m4 search for an appropriate XML
library/link it in/use it at run time.
* There are possible recursion loops in the orte_output() and
orte_show_help() functions -- e.g., if RML send calls orte_output()
or orte_show_help(). We have some ideas how to fix these, but
figured that it was ok to commit before feature freeze with known
issues. The code currently contains sub-optimal workarounds so
that this will not be a problem, but it would be good to actually
solve the problem rather than have hackish workarounds before v1.3 final.
This commit was SVN r18434.
VxWorks. Still some issues remaining, I'm sure.
Refs trac:1010
This commit was SVN r15320.
The following Trac tickets were found above:
Ticket 1010 --> https://svn.open-mpi.org/trac/ompi/ticket/1010
VXWorks, for example). Checked with George before committing this to
ensure that nothing broke on Windows -- he said it was ok.
This commit was SVN r14388.
I was running into where if a string in the argument list contains a printf
escape sequence, we would segfault. In particular, I was using opal_output
to print the environment and had something like:
LESSOPEN=|/usr/bin/lesspipe.sh %s
in my environment. So I called opal_output(0, "%s", environ[i]) and
got a segfault because the fprintf tried to expand the %s in the
environment variable
This commit was SVN r12094.
The same treatement will happens on all sub-projects. The .h files
have to be C++ compatibles and all symbols with an external visibility
have to get the {PROJECT}_DECLSPEC in front of the prototype.
This commit was SVN r11340.
- move files out of toplevel include/ and etc/, moving it into the
sub-projects
- rather than including config headers with <project>/include,
have them as <project>
- require all headers to be included with a project prefix, with
the exception of the config headers ({opal,orte,ompi}_config.h
mpi.h, and mpif.h)
This commit was SVN r8985.
out-of-bounds protection for output ID's in some functions. Also,
move some logic for closing the syslog inside a conditional block --
it's only necessary to close the syslog if we actually closed a
stream.
This commit was SVN r7518.
that multiple processes don't overwrite each other. Change that
default in orte_init_stage1() to just "output-" (because the file will
be in a process-unique directory at that point; the pid is no longer
necessary).
This commit was SVN r7256.
opal_output_set_output_file_info(). This allows getting and setting
the default directory where output stream files will be opened (for
all *new* streams). Before this function is not invoked, the default
location is $TMPDIR or $HOME (if $TMPDIR is not defined).
Added a call into orte_init_stage1() to call this function
immediately after the session directory is created and set the default
location of stream files to be the process' session directory.
This commit was SVN r7254.
a constructor, like the rest of the code base
- Convert usage in the tree to use the constructor to zero out an
instance of opal_output_stream_t
- Still need to re-enable output files
This commit was SVN r7253.
ompi/).
- There's still a handful of places that have orte/ #include files;
still need to clean those up
- A lot of places still use ompi/include/constants.h -- those need to
be converted over to use OPAL_ return codes and then switch to the
opal constants.h. This commit is the first few steps towards
that...
This commit was SVN r6843.
