One more commit for this ticket... as pointed out by Giles, we have
ompi_op_is_commute(). We should use that instead of replicating the
logic for the test.
Refs trac:4548
This commit was SVN r31497.
The following Trac tickets were found above:
Ticket 4548 --> https://svn.open-mpi.org/trac/ompi/ticket/4548
MPI_OP_COMMUTATIVE should work on all MPI_Op's -- regardless of
whether they are predefined or not.
Refs trac:4548.
This commit was SVN r31491.
The following Trac tickets were found above:
Ticket 4548 --> https://svn.open-mpi.org/trac/ompi/ticket/4548
some of the collective modules, the shared memory and the profiling
interface. I left out VT, dynamic fcoll and seq rmaps.
cmr=v1.8.1:reviewer=jsquyres:subject=silence Coverity reported warnings
This commit was SVN r31309.
Also, since I put some of the macros for these silent/verbose rules up
in the top-level Makefile.man-page-rules file, I renamed it to
Makefile.ompi-rules.
I've had this sitting around for a while; now seems like as good a
time as any to commit it.
This commit was SVN r31271.
Also added some missing values and sentinels.
cmr=v1.8:ticket=trac:4470
This commit was SVN r31263.
The following SVN revision numbers were found above:
r31260 --> open-mpi/ompi@69036437b7
The following Trac tickets were found above:
Ticket 4470 --> https://svn.open-mpi.org/trac/ompi/ticket/4470
- Return an error if the caller specified both MPI_MODE_NOPRECEDE and
MPI_MODE_NOSUCCEED to MPI_Win_fence.
- Return an error if the caller attempts to enter an active target
epoch while already in a passive target epoch.
- End an active target epoch if MPI_Win_fence is called with
MPI_MODE_NOSUCCEED.
cmr=v1.7.5:ticket=trac:4382
This commit was SVN r31043.
The following Trac tickets were found above:
Ticket 4382 --> https://svn.open-mpi.org/trac/ompi/ticket/4382
Optimization of the MPI_Dims_create function which omits the usage of pre
calculated prime numbers and factorize directly as discussed at the developer
list.
cmr=v1.7.5:ticket=4217:reviewer=jsquyres
This commit was SVN r30695.
The following Trac tickets were found above:
Ticket 4217 --> https://svn.open-mpi.org/trac/ompi/ticket/4217
Freeprocs variable was obtained from nnodes, so check the value of nnodes at
the begin in the MPI_PARAM_CHECK code section instead as discussed at the
developer list.
cmr=v1.7.5:reviewer=jsquyres:subject=move parameter check to begin
jsquyres, please review this CMR. Thanks.
This commit was SVN r30694.
just plain wrong (i.e., it gives wrong answers).
When time permits, perhaps we can put in a better algorithm for
MPI_DIMS_CREATE (Andreas Schäfer mentioned that nnodes can now be on
the order of millions, and the current algorithm is... inefficient, at
best).
This commit was SVN r30606.
The following SVN revision numbers were found above:
r30539 --> open-mpi/ompi@fb67d98867
r30540 --> open-mpi/ompi@4417ed2133
primes. This considerably reduces the computational load when
freeprocs is large.
cmr=v1.7.5:reviewer=hjelmn:subject=MPI_Dims_create optimization
This commit was SVN r30539.
pkg{data,lib,includedir}, use our own ompi{data,lib,includedir}, which is
always set to {datadir,libdir,includedir}/openmpi. This will keep us from
having help files in prefix/share/open-rte when building without Open MPI,
but in prefix/share/openmpi when building with Open MPI.
This commit was SVN r30140.
the fortran handle. Use a seperate opal_pointer_array to keep track of
the fortran handles of communicators.
This commit also fixes a bug in ompi_comm_idup where the newcomm was not
set until after the operation completed.
cmr=v1.7.4:reviewer=jsquyres:ticket=trac:3796
This commit was SVN r29342.
The following Trac tickets were found above:
Ticket 3796 --> https://svn.open-mpi.org/trac/ompi/ticket/3796
MPI_Comm_idup.
As part of this work I implemented a basic request scheduler in
ompi/comm/comm_request.c. This scheduler might be useful for more
than just communicator requests and could be moved to ompi/request
if there is a demand. Otherwise I will leave it where it is.
Added a non-blocking version of ompi_comm_set to support ompi_comm_idup.
The call makes a recursive call to comm_dup and a non-blocking version
was needed. To simplify the code the blocking version calls the nonblocking
version and waits on the resulting request if one exists.
cmr=v1.7.4:reviewer=jsquyres:ticket=trac:3796
This commit was SVN r29334.
The following Trac tickets were found above:
Ticket 3796 --> https://svn.open-mpi.org/trac/ompi/ticket/3796
arrays.
The MPI 3.0 standard added const to all in buffers in the C bindings. This
commit adds the const keyword and in most cases casts const away. We will
eventually should go through and update the various interfaces (coll, pml,
io, etc) to take the const keyword. The group, comm, win, and datatype
interfaces have been updated with const.
cmr=v1.7.4:ticket=trac:3785:reviewer=jsquyres
This commit was SVN r29266.
The following Trac tickets were found above:
Ticket 3785 --> https://svn.open-mpi.org/trac/ompi/ticket/3785
Blocking versions are simple linear algorithms implemented in coll/basic. Non-
blocking versions are from libnbc 1.1.1. All algorithms have been tested with
simple test cases.
cmr=v1.7.4:reviewer=jsquyres
This commit was SVN r29265.
The intercomm "merge" function can create a linkage between procs that was not reflected anywhere in a modex, and so at least some of the procs in the resulting communicator don't know how to talk to some of the new communicator's peers.
For example, consider the case where:
1. parent job A comm_spawns a process (job B) - these processes exchange modex and can communicate
2. parent job A now comm_spawns another process (job C) - again, these can communicate, but the proc in C knows nothing of B
3. do an intercomm merge across the communicators created by the two comm_spawns. This puts B and C into the same communicator, but they know nothing about how to talk to each other as they were not involved in any exchange of contact info. Hence, collectives on that communicator now fail.
This fix adds an API to the ompi/dpm framework that (a) exchanges the modex info across the procs in the merge to ensure all procs know how to communicate, and (b) calls add_procs to give the btl's a chance to select transports to any new procs.
cmr:v1.7.3:reviewer=jsquyres
This commit was SVN r29166.
The following Trac tickets were found above:
Ticket 2904 --> https://svn.open-mpi.org/trac/ompi/ticket/2904
Working on faster algorithms for tuned that will come at a later time.
cmr=v1.7.3:ticket=trac:2965
This commit was SVN r28952.
The following Trac tickets were found above:
Ticket 2965 --> https://svn.open-mpi.org/trac/ompi/ticket/2965
Add support for MPI_Count type and MPI_COUNT datatype and add the required
MPI-3 functions MPI_Get_elements_x, MPI_Status_set_elements_x,
MPI_Type_get_extent_x, MPI_Type_get_true_extent_x, and MPI_Type_size_x.
This commit adds only the C bindings. Fortran bindins will be added in
another commit. For now the MPI_Count type is define to have the same size
as MPI_Offset. The type is required to be at least as large as MPI_Offset
and MPI_Aint. The type was initially intended to be a ssize_t (if it was
the same size as a long long) but there were issues compiling romio with
that definition (despite the inclusion of stddef.h).
I updated the datatype engine to use size_t instead of uint32_t to support
large datatypes. This will require some review to make sure that 1) the
changes are beneficial, 2) nothing was broken by the change (I doubt
anything was), and 3) there are no performance regressions due to this
change.
Increase the maximum number of predifined datatypes to support MPI_Count
Put common get_elements code to ompi/datatype/ompi_datatype_get_elements.c
Update MPI_Get_count to reflect changes in MPI-3 (return MPI_UNDEFINED when the count is too large for an int)
This commit was SVN r28932.
This patch reshape the way we deal with topologies completely. Where
our topologies were mainly storage components (they were not capable
of creating the new communicator), the new version is built around a
[possibly] common representation (in mca/topo/topo.h), but the functions
to attach and retrieve the topological information are specific to each
component. As a result the ompi_create_cart and ompi_create_graph functions
become useless and have been removed.
In addition to adding the internal infrastructure to manage the topology
information, it updates the MPI interface, and the debuggers support and
provides all Fortran interfaces.
This commit was SVN r28687.
requests. This patch fixes trac:3475.
CMR v1.6, v1.7
This commit was SVN r28431.
The following Trac tickets were found above:
Ticket 3475 --> https://svn.open-mpi.org/trac/ompi/ticket/3475
Notes:
- This commit also eliminates the need for an available components list in use
in several frameworks. None of the code in question was making use of the
priority field of the priority component list item so these extra lists were
removed.
- Cleaned up selection code in several frameworks to sort lists using opal_list_sort.
- Cleans up the ompi/orte-info functions. Expose the functions that construct the
list of params so they can be used elsewhere.
patches for mtl/portals4 from brian
missed a few output variables in openib
This commit was SVN r28241.
ompi_show_help, because opal_show_help is replaced with an
aggregating version when using ORTE, so there's no reason to
directly call orte_show_help.
This commit was SVN r28051.
