Other changes:
1. Remove the old xcpu components as they are not functional.
2. Fix a "bug" in orterun whereby we called dump_aborted_procs even when we normally terminated. There is still some kind of bug in this procedure, however, as we appear to be calling the orterun job_state_callback function every time a process terminates (instead of only once when they have all terminated). I'll continue digging into that one.
This will require an autogen/configure, I'm afraid.
This commit was SVN r11228.
Clean up the remainder of the size_t references in the runtime itself. Convert to orte_std_cntr_t wherever it makes sense (only avoid those places where the actual memory size is referenced).
Remove the obsolete oob barrier function (we actually obsoleted it a long time ago - just never bothered to clean it up).
I have done my best to go through all the components and catch everything, even if I couldn't test compile them since I wasn't on that type of system. Still, I cannot guarantee that problems won't show up when you test this on specific systems. Usually, these will just show as "warning: comparison between signed and unsigned" notes which are easily fixed (just change a size_t to orte_std_cntr_t).
In some places, people didn't use size_t, but instead used some other variant (e.g., I found several places with uint32_t). I tried to catch all of them, but...
Once we get all the instances caught and fixed, this should once and for all resolve many of the heterogeneity problems.
This commit was SVN r11204.
Added another system-level test function for ORTE that just spins until terminated by a ctrl-c signal.
Modified orterun - added a couple of newlines to the output when abnormally terminating so the prompt always is on a new line.
This commit was SVN r10866.
- change -no_oversubscribe to -nooversubscribe (to be similar to
-nolocal)
- Added text to orterun.1 describing slots and -nooversubscribe
Still need to add text about "mpirun a.out" functionality, and RHC
wants to make some minor edits, so committing for synchronization.
This commit was SVN r10800.
- orte-clean.c : check to see if the base session directory is empty
and delete it if it is.
- orte_universe_exists.c : Fix a down stread problem resulting from
George's r10718 commit. Don't use the 'fulldirpath' since
that is no longer guarenteed to be the absolute path
to the session directory. Construct this value outside of that
function from the prefix and frontend vars.
This commit was SVN r10741.
The following SVN revision numbers were found above:
r10718 --> open-mpi/ompi@47eef2e002
so that it does not return an error when no universe is passed to it.
Also put back in the 'Slots In Use' column as it is now working properly
per Ralphs recent ras commits. Still not sure what 'Slots Alloc' is meant
to represent, so left that as #if 0'd out for the moment.
This commit was SVN r10739.
The following SVN revision numbers were found above:
r10718 --> open-mpi/ompi@47eef2e002
Update the help text to report errors when not following that rule.
Also updated the RMAPS help text to reflect the reorganization of some of the round-robin code into the base.
The new functionality has been tested under Mac OS-X and on Odin using an MPI program. Both byslot and bynode mapping have been checked and verified. Operational support for other systems needs to be verified - I respectfully request people's help in doing so.
This commit was SVN r10708.
/tmp/tm-merge). Validated by RHC. Summary:
- Add --nolocal (and -nolocal) options to orterun
- Make some scalability improvements to the tm pls
This commit was SVN r10651.
After seeing the uglyness that is removing directories in the
codebase I decided to push down this to the OPAL by extending the
opal/os_create_dirpath.(c|h) to contain some more functionality.
In this process I renamed 'os_create_dirpath' to 'os_dirpath' since it
is a bit more general now.
Added a few functions to:
- check if an directory is empty
- check to see if the access permissions are set correctly
- destroy the directory at the end of the dirpath
- By using a caller callback function (a la Perl, I believe)
for every file, the caller can have fine grained control over
whether a specific file is deleted or not.
This simplifies things a bit for orte_session_dir_(finalize|cleanup)
as it should no longer contain any of this functionality, but uses
these functions to do the work.
From the external perspective nothing has changed, from the
developer point of view we have some cleaner, more generic code.
This commit was SVN r10640.
Since we don't properly handle connecting/disconecting from multiple
universes, only connect to the first one (or the user specified one).
This is a bug that needs to be fixed, but involves some deep magic in
ORTE.
Print the node segment upon request (-n option).
{{{
Node Name | Arch | Cell ID | State | Slots | Slots Max |
-----------------------------------------------------------
odin001 | | 0 | Unknown | 2 | 4 |
odin002 | | 0 | Unknown | 2 | 5 |
odin003 | | 0 | Unknown | 2 | 6 |
odin004 | | 0 | Unknown | 2 | 7 |
}}}
Since node_slots_alloc and node_slots_inuse are not properly updated
in the GPR don't print those values.
This commit was SVN r10633.
This moves the logic to create the symbolic links for:
- mpirun
- mpiexec
- ompi-ps
- ompi-clean
and their respective man pages to the ompi level from
the orte layer.
This is a bit pedantic, but orte shouldn't be doing the
work of ompi since that is a bit of an abstraction break.
Note: need to autogen.sh to get this. Sorry :(
This commit was SVN r10602.
per a request.
Currently it is not working well. That will soon change
as it just needs a bit of attention and testing to
make it lots-mo-betta.
This commit was SVN r10556.
per a request for its functionality into the main trunk.
This command provides basic information about a running job. It
needs a bit of attention, but works fine in its current iteration.
Please play with it, and lets try to work out all the left over bugs.
Pending action for this tool:
It has been requested that the tool be changed slightly to allow
it to be called via a function call from internal libraries
(e.g. orteconsole).
This commit was SVN r10554.
SIGUSR2. This can be extended later if needed to include other
signals we should forward to the user processes (TSTP and CONT,
perhaps?)
* Since the signal handlers don't actually run in signal context, we
can use malloc/fprintf/etc. So clean up some of the signal handler
code so that we don't keep message buffers around for the life of
the process
This commit was SVN r10496.
mpirun/orterun now has an option to print the version number. If -V/--version
is given, it will print the version number. If it's the only option, we
exit cleanly. Otherwise, we continue on as if --version wasn't given
(except we've printed the version number).
--This line, and th se below, will be ignored--
M orte/tools/orterun/orterun.c
M orte/tools/orterun/help-orterun.txt
This commit was SVN r10276.
1. Changed the RMGR and PLS APIs to add "signal_job" and "signal_proc" entry points. Only the "signal_job" entries are implemented - none of the components have implementations for "signal_proc" at this time. Thus, you can signal all of the procs in a job, but cannot currently signal only one specific proc.
2. Implemented those new API functions in all components except xgrid (Brian will do so very soon). Only the rsh/ssh and fork modules have been tested, however, and only under OS-X.
3. Added signal traps and callback functions for SIGUSR1/2 to orterun/mpirun that catch those signals and call the appropriate commands to propagate them out to all processes in the job.
4. Added a new test directory under the orte branch to (eventually) hold unit and system level tests for just the run-time. Since our test branch of the repository is under restricted access, people working on the RTE were continually developing their own system-level tests - thus making it hard to help diagnose problems. I have moved the more commonly-used functions here, and added one specifically for testing the SIGUSR1/2 functionality.
I will be contacting people directly to seek help with testing the changes on more environments. Other than compile issues, you should see absolutely no change in behavior on any of your systems - this additional functionality is transparent to anyone who does not issue a SIGUSR1/2 to mpirun.
Ralph
This commit was SVN r10258.
option as discussed on the devel-core mailing list. The Big
Difference is that instead of hard-coding the strings "/lib" and
"/bin" in to append to the prefix, we append the basename of the local
libdir and bindir. Hence, if your libdir is $prefix/lib64, we'll
append /lib64 to construct the remote node's LD_LIBRARY_PATH (etc.).
Also appended the orterun.1 man page to include a description of
--prefix, how it is constructed, what it handles / what it does not,
etc.
This commit was SVN r9930.
in San Jose. Allow the configure option --disable-binaries to build OMPI,
but not build or install the support binaries (so basically, just build
the libraries).
This commit was SVN r9777.
automagically bring in the libraries through the top-level library (so
liborte automatically brings in libopal, etc.). Otherwise, we get some
warnings on Solaris
This should go to the v1.1 branch
This commit was SVN r9666.
NOTE: JEFF SHOULD CHECK THIS!
I found that orterun was not tracking the index number of the app_contexts it was creating. Hence, the app_context->idx field was always sitting at zero. This index is used by the mapper to decide which app_context to use for each process - thus, with the value of each index being zero, the mapper only used the first app_context that was created. All others were ignored.
Not sure when this might have gotten changed. Could be it was a problem that always existed, but didn't get exposed until something else was changed.
Anyway, it seems to work now - could stand further testing.
This commit was SVN r9389.
