lsb_launch tampers with SIGCHLD signal handler. We are forced to reinstall our own signal handler after a call to this function.
This commit fixes trac:1356.
This commit was SVN r19033.
The following Trac tickets were found above:
Ticket 1356 --> https://svn.open-mpi.org/trac/ompi/ticket/1356
After much work by Jeff and myself, and quite a lot of discussion, it has become clear that we simply cannot resolve the infinite loops caused by RML-involved subsystems calling orte_output. The original rationale for the change to orte_output has also been reduced by shifting the output of XML-formatted vs human readable messages to an alternative approach.
I have globally replaced the orte_output/ORTE_OUTPUT calls in the code base, as well as the corresponding .h file name. I have test compiled and run this on the various environments within my reach, so hopefully this will prove minimally disruptive.
This commit was SVN r18619.
Add a new function to opal_progress that tells us our recursion depth to support that solution.
Yes, I know this sounds picky, but good ol' Jeff managed to make it happen by driving his cluster near to death...
Also ensure that we declare "failed" for the daemon job when daemons fail instead of the application job. This is important so that orte knows that it cannot use xcast to tell daemons to "exit", nor should it expect all daemons to respond. Otherwise, it is possible to hang.
After lots of testing, decide to default (again) to slurm detecting failed orteds. This proved necessary to avoid rather annoying hangs that were difficult to recover from. There are conditions where slurm will fail to launch all daemons (slurm folks are working on it), and yet again, good ol' Jeff managed to find both of them.
Thanks you Jeff! :-/
This commit was SVN r18611.
such, the commit message back to the master SVN repository is fairly
long.
= ORTE Job-Level Output Messages =
Add two new interfaces that should be used for all new code throughout
the ORTE and OMPI layers (we already make the search-and-replace on
the existing ORTE / OMPI layers):
* orte_output(): (and corresponding friends ORTE_OUTPUT,
orte_output_verbose, etc.) This function sends the output directly
to the HNP for processing as part of a job-specific output
channel. It supports all the same outputs as opal_output()
(syslog, file, stdout, stderr), but for stdout/stderr, the output
is sent to the HNP for processing and output. More on this below.
* orte_show_help(): This function is a drop-in-replacement for
opal_show_help(), with two differences in functionality:
1. the rendered text help message output is sent to the HNP for
display (rather than outputting directly into the process' stderr
stream)
1. the HNP detects duplicate help messages and does not display them
(so that you don't see the same error message N times, once from
each of your N MPI processes); instead, it counts "new" instances
of the help message and displays a message every ~5 seconds when
there are new ones ("I got X new copies of the help message...")
opal_show_help and opal_output still exist, but they only output in
the current process. The intent for the new orte_* functions is that
they can apply job-level intelligence to the output. As such, we
recommend that all new ORTE and OMPI code use the new orte_*
functions, not thei opal_* functions.
=== New code ===
For ORTE and OMPI programmers, here's what you need to do differently
in new code:
* Do not include opal/util/show_help.h or opal/util/output.h.
Instead, include orte/util/output.h (this one header file has
declarations for both the orte_output() series of functions and
orte_show_help()).
* Effectively s/opal_output/orte_output/gi throughout your code.
Note that orte_output_open() takes a slightly different argument
list (as a way to pass data to the filtering stream -- see below),
so you if explicitly call opal_output_open(), you'll need to
slightly adapt to the new signature of orte_output_open().
* Literally s/opal_show_help/orte_show_help/. The function signature
is identical.
=== Notes ===
* orte_output'ing to stream 0 will do similar to what
opal_output'ing did, so leaving a hard-coded "0" as the first
argument is safe.
* For systems that do not use ORTE's RML or the HNP, the effect of
orte_output_* and orte_show_help will be identical to their opal
counterparts (the additional information passed to
orte_output_open() will be lost!). Indeed, the orte_* functions
simply become trivial wrappers to their opal_* counterparts. Note
that we have not tested this; the code is simple but it is quite
possible that we mucked something up.
= Filter Framework =
Messages sent view the new orte_* functions described above and
messages output via the IOF on the HNP will now optionally be passed
through a new "filter" framework before being output to
stdout/stderr. The "filter" OPAL MCA framework is intended to allow
preprocessing to messages before they are sent to their final
destinations. The first component that was written in the filter
framework was to create an XML stream, segregating all the messages
into different XML tags, etc. This will allow 3rd party tools to read
the stdout/stderr from the HNP and be able to know exactly what each
text message is (e.g., a help message, another OMPI infrastructure
message, stdout from the user process, stderr from the user process,
etc.).
Filtering is not active by default. Filter components must be
specifically requested, such as:
{{{
$ mpirun --mca filter xml ...
}}}
There can only be one filter component active.
= New MCA Parameters =
The new functionality described above introduces two new MCA
parameters:
* '''orte_base_help_aggregate''': Defaults to 1 (true), meaning that
help messages will be aggregated, as described above. If set to 0,
all help messages will be displayed, even if they are duplicates
(i.e., the original behavior).
* '''orte_base_show_output_recursions''': An MCA parameter to help
debug one of the known issues, described below. It is likely that
this MCA parameter will disappear before v1.3 final.
= Known Issues =
* The XML filter component is not complete. The current output from
this component is preliminary and not real XML. A bit more work
needs to be done to configure.m4 search for an appropriate XML
library/link it in/use it at run time.
* There are possible recursion loops in the orte_output() and
orte_show_help() functions -- e.g., if RML send calls orte_output()
or orte_show_help(). We have some ideas how to fix these, but
figured that it was ok to commit before feature freeze with known
issues. The code currently contains sub-optimal workarounds so
that this will not be a problem, but it would be good to actually
solve the problem rather than have hackish workarounds before v1.3 final.
This commit was SVN r18434.
Basically, the method employed here is to have a recv create a zero-time timer event that causes the event library to execute a function that processes the message once the recv returns. Thus, any action taken as a result of processing the message occur outside of a recv.
Created two new macros to assist:
ORTE_MESSAGE_EVENT: creates the zero-time event, passing info in a new orte_message_event_t object
ORTE_PROGRESSED_WAIT: while waiting for specified conditions, just calls progress so messages can be recv'd.
Also fixed the failed_launch function as we no longer block in the orted callback function. Updated the error messages to reflect revision. No change in API to this function, but PLM "owners" may want to check their internal error messages to avoid duplication and excessive output.
This has been tested on Mac, TM, and SLURM.
This commit was SVN r17647.
single threaded builds. In its default configuration, all this does
is ensure that there's at least a good chance of threads building
based on non-threaded development (since the variable names will be
checked). There is also code to make sure that a "mutex" is never
"double locked" when using the conditional macro mutex operations.
This is off by default because there are a number of places in both
ORTE and OMPI where this alarm spews mega bytes of errors on a
simple test. So we have some work to do on our path towards
thread support.
Also removed the macro versions of the non-conditional thread locks,
as the only places they were used, the author of the code intended
to use the conditional thread locks. So now you have upper-case
macros for conditional thread locks and lowercase functions for
non-conditional locks. Simple, right? :).
This commit was SVN r15011.
- use the OPAL functions for PATH and environment variables
- make all headers C++ friendly
- no unamed structures
- no implicit cast.
Plus a full implementation for the orte_wait functions.
This commit was SVN r11347.
- move files out of toplevel include/ and etc/, moving it into the
sub-projects
- rather than including config headers with <project>/include,
have them as <project>
- require all headers to be included with a project prefix, with
the exception of the config headers ({opal,orte,ompi}_config.h
mpi.h, and mpif.h)
This commit was SVN r8985.
- change the framework opens to [mostly] use the new MCA param API
- properly pass in framework debug output streams to the
mca_base_component_open() function
This commit was SVN r6888.
* Add ability to completely disable libltdl (the dlopen code to load
dynamic shared objects) to configure: --disable-dlopen
* Added MCA param (component_disable_dlopen) to disable DSO loading
at runtime
* Made the event library behave in some not-completely-erroneous way
on platforms where it has absolutely no eventops support (ie, no
select, poll, or epoll)
* Disabled orte_wait, opal_few, and opal_daemon_init code on
platforms without fork, waitpid support. All non-init functions
will return OPMI_ERR_NOT_SUPPORTED
* Disable orteprobe tool when fork or pipe aren't supported
This commit was SVN r6490.
