It never lived up to its purpose (and has caused amorphous indirect
errors such as https://github.com/open-mpi/ompi/issues/2519), so
delete it.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
(cherry picked from commit dd20174532)
Update the OPAL_CHECK_OFI configury macro:
- Make it safe to call the macro multiple times:
- The checks only execute the first time it is invoked
- Subsequent invocations, it just emits a friendly "checking..."
message so that configure output is sensible/logical
- With the goal of ultimately removing opal/mca/common/ofi, rename the
output variables from OPAL_CHECK_OFI to be
opal_ofi_{happy|CPPFLAGS|LDFLAGS|LIBS}.
- Update btl/usnic and mtl/ofi for these new conventions.
- Also, don't use AC_REQUIRE to invoke OPAL_CHECK_OFI because that
causes the macro to be invoked at a fairly random time, which makes
configure stdout confusing / hard to grok.
- Remove a little left-over kruft in OPAL_CHECK_OFI, too (which
resulted in an indenting change, making the change to
opal_check_ofi.m4 look larger than it really is).
Thanks Alastair McKinstry for the report and initial fix.
Thanks Rashika Kheria for the reminder.
Updated from master cherry pick: the OFI BTL does not exist on the
v4.0.x branch. Therefore, did not include the OFI BTL changes on
master in this cherry pick.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
(cherry picked from commit f5e1a672cc)
Reset ptypes when cloning a datatype in order to prevent
a double free() in the opal_datatype_t destructor.
This fixes a bug introduced in open-mpi/ompi@7c938f070fFixesopen-mpi/ompi#6346
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
(cherry picked from commit open-mpi/ompi@b395342c9f)
The issue was a little complicated due to the internal stack used in the
convertor. The main issue was that in the case where we run out of iov
space to save the raw description of the data while hanbdling a
repetition (loop), instead of saving the current position and bailing out
directly we reading of the next predefined type element. It worked in
most cases, except the one identified by the HDF5 test. However, the
biggest issue here was the drop in performance for all ensuing calls to
the convertor pack/unpack, as instead of handling contiguous loops as a
whole (and minimizing the number of memory copies) we copied data
description by data description.
Signed-off-by: George Bosilca <bosilca@icl.utk.edu>
(back-ported from commit open-mpi/ompi@5a82c4fd07)
correctly handle the case in which iovec is full and the
last accessed element of the datatype is the beginning of a loop
Refs. open-mpi/ompi#6285
Thanks Axel Huebl for reporting this
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
(back-ported from commit open-mpi/ompi@0832ab5acc)
When compiling mpi.h with a modern C++ compiler and a high degree of
pickyness (e.g., -Wold-style-cast), casting using (void*) in the
OMPI_PREDEFINED_GLOBAL and MPI_STATUS*_IGNORE macros will emit
warnings. So if we're compiling with a C++ compiler, use C++'s
static_cast<> instead of (void*).
Thanks to @shadow-fax for identifying the issue.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
(cherry picked from commit 30afdcead9)
correctly free ptypes if the datatype is not pre-defined.
Thanks Axel Huebl for reporting this.
Refs. open-mpi/ompi#6291
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
(cherry picked from commit 7c938f070f)
Similar to #6286 rounding number of bytes into a single precision floating point value to round up the result of a division is a potential risk due to rounding errors.
- remove floating point operations for `round up`
- removes floating point conversion for round down (native behavior of integer division)
Signed-off-by: René Widera <r.widera@hzdr.de>
(cherry picked from commit a91fab80a1)
This commit fixes a problem reported on the mailing list with
individual writes larger than 512 MB.
The culprit is a floating point division of two large, close values.
Changing the datatypes from float to double (which is what is being
used in the fcoll components) fixes the problem.
See issue #6285 and
https://forum.hdfgroup.org/t/cannot-write-more-than-512-mb-in-1d/5118
Thanks for Axel Huebl and René Widera for reporting the issue.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
(cherry picked from commit c0f8ce0fff)
treematch/km_partitioning.c #include "config.h",
but there is no such file when the embedded treematch is used.
In order to prevent the embedded treematch from incorrectly using
the config.h from the embedded hwloc, generate a dummy config.h.
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
(cherry picked from commit 0aeb27f776)
opal_config_bottom.h can only be #include'd in opal_config.h,
so there is no need to #include "opal_config.h" inside.
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
(cherry picked from commit c8790d29de)
Some macros defined by the embedded hwloc ends up in opal_config.h
because hwloc configury m4 files are slurped into Open MPI. These
macros are not required here, and they might conflict with an external
hwloc install, so simply #undef them in hwloc/external/external.h
after including <opal_config.h> but before including the external
<hwloc.h>.
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
(cherry picked from commit f22b7d4f46)
ACCUMULATE, unlike REDUCE, can use with derived
datatypes with predefinied operations, with some
restrictions outlined in MPI-3:11.3.4. The derived
datatype must be composed entierly from one predefined
datatype (so you can do all the construction you want,
but at the bottom, you can only use one datatype, say,
MPI_INT).
Refs. open-mpi/ompi#6275
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
(back-ported from commit open-mpi/ompi@bc1cab5498)
Needed to apply commit from PR #5778 to get this commit
from PR #6238 to apply cleanly.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
(cherry picked from commit b19e5edf76)
Correctly transfer job-level mapping directives for dynamically spawned
jobs to the mapping system.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
(cherry picked from commit 45f23ca5c9)
Update the OPAL glue configure code to correctly link the opal/pmix3
component to the hwloc used by OMPI instead of defaulting to the
system-level hwloc. Required a corresponding update to the PMIx hwloc
configure code so we treat hwloc the same way we handle libevent in
embedded scenarios. Roll to PMIx v3.1.2 for plugging of memory leaks and
addition of faster PMIx_Get response
Signed-off-by: Ralph Castain <rhc@pmix.org>
clang 5.0 on trusty is busted with respect to C11 atomics
This can be evidenced with the simple program below.
This test was added into OPAL_PROG_CC_C11_HELPER() and disable
C11 atomics if it fails.
_Atomic uint32_t a;
uint32_t b;
atomic_fetch_xor_explicit(&a, b, memory_order_relaxed);
Refs. open-mpi/ompi#6264
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
(cherry picked from commit open-mpi/ompi@d1fadebc65)
Valgrind warns that *newtype is uninitialized when calling from
Fortran as e.g.
use mpi
integer :: t, err
call MPI_Type_create_f90_integer(5, t, err)
Since newtype is intent(out), this should not happen. There is
no reason to convert the type using PMPI_Type_f2c, only to over-
write it immediately afterwards. The other type_create_* functions
did not convert newtype.
The valgrind warnings:
==28441== Conditional jump or move depends on uninitialised value(s)
==28441== at 0x581B555: PMPI_Type_f2c (in [...]/lib/libmpi.so.0.0.0)
==28441== by 0x4E87AB7: MPI_TYPE_CREATE_F90_INTEGER (in [...]/lib/libmpi_mpifh.so.0.0.0)
==28441== by 0x400BA1: MAIN__ (in [...])
==28441== by 0x400C46: main (in [...])
==28441==
==28441== Conditional jump or move depends on uninitialised value(s)
==28441== at 0x581B563: PMPI_Type_f2c (in [...]/lib/libmpi.so.0.0.0)
==28441== by 0x4E87AB7: MPI_TYPE_CREATE_F90_INTEGER (in [...]/lib/libmpi_mpifh.so.0.0.0)
==28441== by 0x400BA1: MAIN__ (in [..])
==28441== by 0x400C46: main (in [...])
==28441==
==28441== Use of uninitialised value of size 8
==28441== at 0x581B577: PMPI_Type_f2c (in [...]/lib/libmpi.so.0.0.0)
==28441== by 0x4E87AB7: MPI_TYPE_CREATE_F90_INTEGER (in [...]/lib/libmpi_mpifh.so.0.0.0)
==28441== by 0x400BA1: MAIN__ (in [...])
==28441== by 0x400C46: main (in [...])
==28441==
Signed-off-by: Risto Toijala <risto.toijala@gmail.com>
(cherry picked from commit f14a0f4fc9)
This commit fixes a bug where add_procs can incorrectly return an
error when going through the dynamic add_procs path. This doesn't
happen normally, only when pml/ob1 is not in use.
References #6201
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
(cherry picked from commit 30b8336cb4)
The PMIX_MODEX and PMIX_INFO_ARRAY macros were removed from the PMIx 3.1 standard.
Open MPI does not really need them (they are only used to be reported as not supported),
so smply #ifdef protect them to support an external PMIx v3.1
The change only need to be done in ext3x/ext3x.c.
But since this file is automatically generated from pmix3x/pmix3x.c, we have to update
the latter file.
Refs. open-mpi/ompi#6247
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
(back-ported from commit open-mpi/ompi@950ba16aa1)
Fixes scoll_basic failures with shmem_verifier, caused by recent changes
in handling of zero-size collectives.
- Check for zero-size length only for fixed size collect (shmem_fcollect),
but not for variable-size collect (shmem_collect)
- Add 'nlong_type' parameter to internal broadcast function, to indicate
whether the 'nlong' parameter is valid on non-root PEs, since it's
used by shmem_collect algorithm. Before this change, some components
assumed it's true (scoll_mpi) while others assumed it's false
(scoll_basic).
- In scoll_basic, if nlong_type==false, do not exit if nlong==0, since
this parameter may not be the same on all PEs.
- In scoll_mpi, fallback to scoll_basic if nlong_type==false, since MPI
requires the 'count' argument of MPI_Bcast to be valid on all ranks.
(Picked from master 939162e)
Signed-off-by: Yossi Itigin <yosefe@mellanox.com>
This is a cherry-pick of master (2820aef). The propagation is intended to resolve issue #6130
Signed-off-by: Aurélien Bouteiller <bouteill@icl.utk.edu>
Adding the implementations of the functions that were removed
from the MPI standard to the build list, regardless of the
state of the OMPI_ENABLE_MPI1_COMPAT.
According to the README, we want the OMPI_ENABLE_MPI1_COMPAT
configure flag to control which MPI prototypes are exposed in
mpi.h, NOT, which are built into the mpi library. Those will
remain in the mpi library until a future major release (5.0?)
NOTE: for the Fortran implementations, we instead define
OMPI_OMIT_MPI1_COMPAT_DECLS to 0 instead of
OMPI_ENABLE_MPI1_COMPAT to 1. I'm not sure why, but
this seems to work correctly.
Also changing the removed MPI_Errhandler_create implementation
to use the non removed MPI_Comm_errhandler_function prototype
(prototype remains unchanged from MPI_Comm_errhandler_fn)
NOTE: This commit is *NOT* a cherry-pick from master, because
on master, we are no longer building those symbols by
default, but on v4.0.x we _ARE_ still building these
symbols by default. This is because the v4.0.x branch
is to remain backwards compatible with v3.0.x, while at
the same time removing the "removed" symbols from mpi.h
(unless the user configures with --enable-mpi1-compatibility)
Signed-off-by: Geoffrey Paulsen <gpaulsen@us.ibm.com>
