Fixes an assertion failure in --enable-debug builds and SEGVs in normal
builds.
I'm not 100% sure I like this model, but it at least seems to be
consistent. Some variation on this scheme will need to be adapted to
the trunk, where usnic_del_procs() is called by the PML instead of
internally in usnic_finalize().
A related bug (but with different mechanics) is #4832.
This commit was SVN r32424.
Per patch from aryzhikh, initialize a copule of fields in the openib ini struct
Hard to understand why this has sat there for so long...
cmr=v1.8.2:reviewer=rhc:subject=initialize a copule of fields in the openib ini struct
This commit was SVN r32417.
The following Trac tickets were found above:
Ticket 4377 --> https://svn.open-mpi.org/trac/ompi/ticket/4377
Previously, the connectivity agent was pretty dumb: it took whatever
pings it got and ACKed them. Then we added an agent check to ensured
that the ping actually came from the source interface that it said it
came from. Now we add another check such that when a ping is received
on interface X that corresponds to usnic module Y, we ensure that the
source interface of the ping is on the all_endpoints list for module Y
(i.e., module Y expects to be able to talk to that peer interface).
This detects cases where peers have come to different conclusions
about which interfaces should be used to communicate (which is bad!).
This usually reflects a network misconfiguration.
Fixes CSCuq05389.
This commit was SVN r32383.
Ensure that incoming "ping" messages came from the IP address that
they think they came from. If they don't, drop them (because it is
probably routing error), which will likely eventually cause the
connectivity checker to timeout, and therefore cause the job to abort.
This commit was SVN r32368.
Update compat.h to only handle compatability between v1.7/v1.8 and
v1.9/2.0 (i.e., the current trunk). Remove what seems to be the last
vestiages of OMPI/ORTE pollution in the now-OPAL-ized usnic BTL.
Currently use a hard-coded constant for the MCW size (i.e.,
MPI_COMM_WORLD size) for some initialization values in the v1.9/2.0
series; still need to figure out something better there.
This commit was SVN r32365.
Adapt to moving down to OPAL: find a PML-registered error callback,
and use that when we don't have a module context and we need to abort.
Failing that, just call exit().
This commit was SVN r32362.
communication library should use to initialize itself.
Ralph will champion this change back with an RFC if there is a realistic
need/use case from the community.
This commit was SVN r32361.
The following SVN revision numbers were found above:
r32355 --> open-mpi/ompi@c903917f47
If --with-usnic is specified and we can't build the usnic BTL, abort.
If --without-usnic is specified, gracefully skip building the usnic
BTL. If neither is specified, do the OMPI-default behavior: try to
configure/build the usnic BTL, and if we can't, skip it.
Fixes CSCuq13889.
This commit was SVN r32349.
The only user of this code was coll/sm. I implemented a basic replacement
for the removed code. This gets the trunk compiling again with
--disable-dlopen.
This commit was SVN r32333.
common/ofacm is only used by the iboffload code in ompi. This code does
not currently work so it is safe to ignore these components until it is
fixed.
This commit was SVN r32331.
WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL
All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic.
This commit was SVN r32317.
turned out to be a nightmare, as the pointers to the classes are
located in shared libraries memory areas, and are not accesible
after the shared library is unloaded. Thus, OPAL cannot cleanup
the left-over classes from the other shared libraries.
This commit was SVN r32248.
The following SVN revision numbers were found above:
r32236 --> open-mpi/ompi@59017433e1
new automake requires subdirs-object directive, to resolve this:
09:43:37 automake: warning: possible forward-incompatibility.
09:43:37 automake: At least a source file is in a subdirectory, but the 'subdir-objects'
09:43:37 automake: automake option hasn't been enabled. For now, the corresponding output
09:43:37 automake: object file(s) will be placed in the top-level directory. However,
09:43:37 automake: this behaviour will change in future Automake versions: they will
09:43:37 automake: unconditionally cause object files to be placed in the same subdirectory
09:43:37 automake: of the corresponding sources.
09:43:37 automake: You are advised to start using 'subdir-objects' option throughout your
09:43:37 automake: project, to avoid future incompatibilities.
09:43:37 tools/otfmerge/Makefile.common:13: warning: source file '$(OTFMERGESRCDIR)/otfmerge.c' is in a subdirectory,
09:43:37 tools/otfmerge/Makefile.common:13: but option 'subdir-objects' is disabled
cmr=v1.8.2:reviewer=ompi-rm1.8
This commit was SVN r32225.
new flag to ompi_info that allows a user to print all MCA variables of a specific type.
--type version_string
This command will print all MCA variables of type version_string.
This feature was developed by Elena Shipunova and was reviewed by Josh Ladd.
This commit was SVN r32166.
mpirun ... -x env_foo1=val1 -x env_foo2 -x env_foo3=val3 should now be expressed as
mpirun ... -mca mca_base_env_list env_foo1=val1+env_foo2+env_foo3=val3.
The motivation for doing this is so that a list of environment variables may be set via standard MCA mechanisms such as mca parameter files, amca lists, etc.
This feature was developed by Elena Shipunova and was reviewed by Josh Ladd.
This commit was SVN r32163.
After discussion with Nathan, change the ERR_VALUE_OUT_OF_BOUNDS to be
ERR_NOT_FOUND, for two reasons:
1. It's consistent with other uses of ERR_NOT_FOUND in the code.
1. In this case, we could have just looked up a variable that is
basically a "hole" -- e.g., var indexes 0, 1, 2 are valid, and 4,
5, and 5 are valid, but 3 is invalid (e.g., 3 was de-registered --
remember that MPI_T explicitly does not allow re-using indexes).
So returning ERR_OUT_OF_BOUNDS seems weird -- returning
ERR_NOT_FOUND seems a bit more natural.
cmr=v1.8.2:ticket=trac:4587
This commit was SVN r32158.
The following Trac tickets were found above:
Ticket 4587 --> https://svn.open-mpi.org/trac/ompi/ticket/4587
The alps ras and plm components were broken by recent changes in ORTE. This
commit resolves those issues.
Changes:
- Define PMI2_SUCCESS if it isn't defined. This fixes a problem with Cray's
PMI implementation which does not define (for some reason) PMI2_SUCCESS. We
had previously just used PMI_SUCCESS.
- Add missing definition and a typo in pml_alps_module.
- launch_id is no longer available in the orte_node_t structure. Use the
attribute lookup to get the value.
- Do not use an O(n^2) sorting algorithm when putting alps nodes in order. Use
opal_list_sort instead (O(nlogn)).
This commit was SVN r32076.
(a) default binding policy is in effect. In this case, we will emit a
warning and default to not binding unless the user provided the
"oversubscribe" or "overload" modifier to the "bind-to" option.
(b) user-specified binding policy is in effect. In this case, we will
error out unless the user provided the "oversubscribe" or "overload"
modifier to the "bind-to" option as we cannot meet the directive.
Either "bind-to" modifier (oversubscribe or overload) will be accepted for
now - in 1.9, we will deprecate the "overload" term in favor of
"oversubscribe".
Also added the ability to accept a --bind-to modifier without specifying the binding policy itself so a user can specify overload-allowed with the default policy.
Closes trac:4345
cmr=v1.8.2:reviewer=rhc:subject=resolve handling of overload conditions
This commit was SVN r32005.
The following Trac tickets were found above:
Ticket 4345 --> https://svn.open-mpi.org/trac/ompi/ticket/4345
