See opal/mca/paffinity/paffinity.h for explanation as to the physical vs logical nature of the params used in the API.
Fixes trac:1435
This commit was SVN r19391.
The following Trac tickets were found above:
Ticket 1435 --> https://svn.open-mpi.org/trac/ompi/ticket/1435
Bring in a new version of PLPA (v1.2b2) with some new capabilities for
offline processors and mapping of the Nth processor/socket/core to its
corresponding Linux processor/socket/core ID.
(Sorry for the configure change in the middle of the day, folks -- I
need it to be able to continue to integrate paffinity changes for
#1435...)
This commit was SVN r19282.
The following Trac tickets were found above:
Ticket 1435 --> https://svn.open-mpi.org/trac/ompi/ticket/1435
* Make the creation of the build dir for the man pages a bit more
robust (thanks to suggestions from Ralf W.).
* Only distribute the .Xin files, not the .X man pages themselves.
* Make the .X files depend on opal_config.h so that if you re-run
configure and change opal_config.h (e.g., a new version), the man
pages should get rebuilt.
* Man pages are now cleaned with "distclean", not "maintainer-clean".
* Fix a typo in opal_crs.7in.
* Udpate make_dist_tarball to update "date" in the VERSION file.
* Make make_dist_tarball a bit friendlier to hg checkouts.
This commit was SVN r19219.
versions, dates and build names.
Fixes trac:1387
Big thanks to Jeff and Brian for help and oversight.
This commit was SVN r19120.
The following Trac tickets were found above:
Ticket 1387 --> https://svn.open-mpi.org/trac/ompi/ticket/1387
* Make the results of the top-level configure.ac test for
_SC_NPROCESSORS_ONLN be cached so that we can check for it
elsewhere (e.g., opal/mca/paffinity/posix/configure.m4)
* Update top-level configure.ac test for _SC_NPROCESSORS_ONLN: stamp
out another AC_TRY_COMPILE
* Ensure paffinity:posix doesn't even try to compile if we don't
have _SC_NPROCESSORS_ONLN
* Minor style updates
This commit was SVN r19118.
put the name of the file that set them if they were set by file. This is of great assistance to support personnel trying to understand why a user is having pro
blems.
Coordinated with Jeff.
This commit was SVN r19111.
* add "register" function to mca_base_component_t
* converted coll:basic and paffinity:linux and paffinity:solaris to
use this function
* we'll convert the rest over time (I'll file a ticket once all
this is committed)
* add 32 bytes of "reserved" space to the end of mca_base_component_t
and mca_base_component_data_2_0_0_t to make future upgrades
[slightly] easier
* new mca_base_component_t size: 196 bytes
* new mca_base_component_data_2_0_0_t size: 36 bytes
* MCA base version bumped to v2.0
* '''We now refuse to load components that are not MCA v2.0.x'''
* all MCA frameworks versions bumped to v2.0
* be a little more explicit about version numbers in the MCA base
* add big comment in mca.h about versioning philosophy
This commit was SVN r19073.
The following Trac tickets were found above:
Ticket 1392 --> https://svn.open-mpi.org/trac/ompi/ticket/1392
Kinda found by MTT. MTT calls 'ompi_info --all --parsable' and it was livelocked and had to be killed by hand.
I'm going to push this one to Jeff to push to v1.3 since he did the original implementation and should check this code.
This commit was SVN r19014.
Modify the odls to remove a (size_t) typecast in front of the num_processors variable just in case it is returned negative. This usually is accompanied by an opal_error, so this shouldn't make any difference - but it is more technically correct.
This commit was SVN r19008.
* Fix linux paffinity component to make a "best" guess when PLPA
can't find topology information in the Linux kernel. That is, if
PLPA can't tell us the max_processor_id, just assume that it's the
same as the number of processors. If you have a more complex
system than that (e.g., you have holes in your available processor
IDs), you'll likely be running a Linux kernel that supports the
topology information, and this problem won't happen.
* Make sure to conver the return codes from PLPA to OPAL_ERR* codes.
This commit was SVN r19001.
The following Trac tickets were found above:
Ticket 1250 --> https://svn.open-mpi.org/trac/ompi/ticket/1250
For now, hide the OSX component with .ompi_ignore so only I can see it until I can ensure that it doesn't inadvertently interfere with Linux and Solaris support.
This clears the conflict with Windows.
This commit was SVN r18989.
- Revert the $2, which was correct.
- It fixes the problem, that memchecker valgrind component could be
compiled and is required, but it is unable to be selected.
This commit was SVN r18906.
The following SVN revision numbers were found above:
r18899 --> open-mpi/ompi@0b1b96b598
Short version: remove opal_paffinity_alone and restore
mpi_paffinity_alone. ORTE makes various information available for the
MPI layer to decide what it wants to do in terms of processor
affinity.
Details:
* remove opal_paffinity_alone MCA param; restore mpi_paffinity_alone
MCA param
* move opal_paffinity_slot_list param registration to paffinity base
* ompi_mpi_init() calls opal_paffinity_base_slot_list_set(); if that
succeeds use that. If no slot list was set, see if
mpi_paffinity_alone was set. If so, bind this process to its Node
Local Rank (NLR). The NLR is the ORTE-maintained slot ID; if you
COMM_SPAWN to a host in this ORTE universe that already has procs
on it, the NLR for the new job will start at N (not 0). So this is
slightly better than mpi_paffinity_alone in the v1.2 series.
* If a slot list is specified *and* mpi_paffinity_alone is set, we
display an error and abort.
* Remove calls from rmaps/rank_file component to register and lookup
opal_paffinity mca params.
* Remove code in orte/odls that set affinities - instead, have them
just pass a slot_list if it exists.
* Cleanup the orte/odls code that determined
oversubscribed/want_processor as these were just opposites of each
other.
This commit was SVN r18874.
The following Trac tickets were found above:
Ticket 1383 --> https://svn.open-mpi.org/trac/ompi/ticket/1383
meat of it was commented out long ago, anyway (because of the way it
was written, it violates OPAL<->OMPI abstraction barriers); we never
ended up using the MPI keyval MCA parameter stuff. So just delete it.
This commit was SVN r18860.
Lenny and I went back and forth on whether we should simply register
another "mpi_paffinity_alone" MCA param and then try to figure out
which one was set in ompi_mpi_init, but there was difficulty in
figuring out what to do. So it seemed like the Right Thing to do was
to implement what was committed in r18770; then we could tell where
MCA parameters were set from and you could do Better Things (this is
also useful in the openib BTL, where parameters can be set either via
MCA parameter or via an INI file).
But after that was done, it seemed only a few steps further to
actually implement two new features in the MCA params area:
* Synonyms (where one MCA param name is a synonym for another)
* Allow MCA params and/or their synonyms to be marked as "deprecated"
(printing out warnings if they are used)
These features have actually long been discussed/desired, and I had
some time in airports and airplanes recently where I could work in
this stuff on a standalone laptop. So I did it. :-)
This commit introduces these two new features, and then uses them to
register mpi_paffinity_alone as a non-deprecated synonym for
opal_paffinity_alone. A few other random points in this commit:
* Add a few error checks for conditions that were not checked before
* Correct some comments in mca_base_params.h
* Add a few comments in strategic places
* ompi_info now prints additional information:
* for any MCA parameter that has synonyms, it lists all the
synonyms
* synonyms are also output as 1st-class MCA params, but with an
additional attribute indicating that they have a "parent"
* all MCA param name (both "real" or "synonym") will output an
attribute indicating whether it is deprecated or not. A synonym
is deprecated if it iself is marked as deprecated (via the
mca_base_param_regist_syn() or mca_base_param_register_syn_name()
functions) or if its "parent" MCA parameter is deprecated
This commit was SVN r18859.
The following SVN revision numbers were found above:
r18770 --> open-mpi/ompi@8efe67e08c
The following Trac tickets were found above:
Ticket 1383 --> https://svn.open-mpi.org/trac/ompi/ticket/1383
I promoted the ''none'' component to a full component, and updated the other components to reflect this code movement. The ''none'' component is the default component unless the user requests '''-am ft-enable-cr''' to auto-select a component. There is an MCA parameter to show a warning if the application requested an FT enabled job, but the ''none'' component was selected ({{{crs_none_select_warning}}}).
This temporarily fixes the problem mentioned in r18739. The full fix will entail working on ticket #1291.
Thanks to Ethan from Sun for finding this bug.
This commit was SVN r18840.
The following SVN revision numbers were found above:
r18739 --> open-mpi/ompi@a003fa7a50
an MCA parameter's value came from. Note that the actual value of the
parameter is irrelevant. For example, if a value was specified in an
MCA parameter file that happened to have the same defaultvalue that
was specified when the parameter was registered, the returned location
will indicate that the value was set from the file.
Possible answers:
* '''MCA_BASE_PARAM_SOURCE_DEFAULT:''' no user-specified values were
found, so the default value was used
* '''MCA_BASE_PARAM_SOURCE_ENV:''' the value came from the
environment (which also means the mpirun/orterun command line!)
* '''MCA_BASE_PARAM_SOURCE_FILE:''' the value came a file (or the
Windows registry)
* '''MCA_BASE_PARAM_SOURCE_KEYVAL:''' the value came from a keyval
(can currently never happen)
* '''MCA_BASE_PARAM_SOURCE_OVERRIDE:''' the value came from an MCA
param API "set" function
This commit was SVN r18770.
bother to check to see whether they exist or not. Specifically, this
will not cause an error:
{{{
shell$ mpirun --mca btl ^does_not_exist ...
}}}
but neither will this:
{{{
shell$ mpirun --mca btl ^sm ...
}}}
(where the sm BTL ''does'' exist)
This commit was SVN r18760.
The following Trac tickets were found above:
Ticket 1365 --> https://svn.open-mpi.org/trac/ompi/ticket/1365
Make sure that if we ask for the 'none' component (which is not a 'real' component, but a component in crs/base) then we do not fail out of the box when using tools. We check for the {{{OPAL_ERR_NOT_FOUND}}} error.
Also make sure that component_open() returns {{{OPAL_ERR_NOT_FOUND}}} when it cannot find a value instead of {{{OPAL_ERROR}}} which means something quite a bit different.
C/R is working but the tools still print the warning below everytime they are ran:
{{{
--------------------------------------------------------------------------
A requested component was not found, or was unable to be opened. This
means that this component is either not installed or is unable to be
used on your system (e.g., sometimes this means that shared libraries
that the component requires are unable to be found/loaded). Note that
Open MPI stopped checking at the first component that it did not find.
Host: odin.cs.indiana.edu
Framework: crs
Component: none
--------------------------------------------------------------------------
}}}
I'll have to figure out a work around for this warning (maybe work on the {{{MCA_NULL}}} Ticket #1291).
This commit was SVN r18739.
The following SVN revision numbers were found above:
r18707 --> open-mpi/ompi@bdaaf01d8a
components. If they are not found / able to be opened, a warning will
be printed and the mca_base_component_find() will return
OPAL_ERR_NOT_FOUND. It is the upper-layer's responsibility to handle
this error appropriately.
This commit was SVN r18707.
The following Trac tickets were found above:
Ticket 1338 --> https://svn.open-mpi.org/trac/ompi/ticket/1338
Some minor changes to help facilitate debugger support so that both mpirun and yod can operate with it. Still to be completed.
This commit was SVN r18664.
don't have MPOL_MF_MOVE). I know that this is a configure change in
the middle of the US workday, but this compile problem is preventing
work on several kinds of systems (e.g., RHEL4).
This commit was SVN r18659.
a standalone library named libopenmpi-malloc. Users wanting to
use leave_pinned with ptmalloc2 will now need to link the library
into their application explicitly. All other users will use the
libc-provided allocator instead of Open MPI's ptmalloc2. This change
may be overriden with the configure option enable-ptmalloc2-internal
- The leave_pinned options will now default to using mallopt on
Linux in the cases where ptmalloc2 was not linked in. mallopt
will also only be available if munmap can be intercepted (the
default whenever Open MPI is not compiled with --without-memory-
manager.
- Open MPI will now complain and refuse to use leave_pinned if
no memory intercept / mallopt option is available.
This commit was SVN r18654.
orte-checkpoint/orte-restart seem to not seem to totally like orte_output so revert them to opal_output for now. Since we have no need for the additional complexity of orte_output we can drop it for now and revisit this if anyone needs it later.
It seems that if you set the verbose level on an output handle then try to call a normal orte_output() on it then the message will *not* be printed. This is the same for opal_output, and seems incorrect to me because it stops some error messages from being printed out if you do not directly specify opal_output(0, ...). Maybe someone should take a look a this.
orte-checkpoint would segv if passed an incorrect PID. Fixed the return code so it errors out properly.
Thanks to Eric Roman for bringing this to my attention.
This commit was SVN r18583.
If Valgrind is requested but wrong version is supplied, print error messages and stop.
Save the CPPFLAGS in opal_memchecker_valgrind_CPPFLAGS, which could be used in
Makefile.am.
Many thanks to Jeff.
This commit was SVN r18573.
1. If we don't have the topology information, don't bother trying to
create cross-referencing information
1. Ensure to only check for valid processor ID's
This commit was SVN r18462.
such, the commit message back to the master SVN repository is fairly
long.
= ORTE Job-Level Output Messages =
Add two new interfaces that should be used for all new code throughout
the ORTE and OMPI layers (we already make the search-and-replace on
the existing ORTE / OMPI layers):
* orte_output(): (and corresponding friends ORTE_OUTPUT,
orte_output_verbose, etc.) This function sends the output directly
to the HNP for processing as part of a job-specific output
channel. It supports all the same outputs as opal_output()
(syslog, file, stdout, stderr), but for stdout/stderr, the output
is sent to the HNP for processing and output. More on this below.
* orte_show_help(): This function is a drop-in-replacement for
opal_show_help(), with two differences in functionality:
1. the rendered text help message output is sent to the HNP for
display (rather than outputting directly into the process' stderr
stream)
1. the HNP detects duplicate help messages and does not display them
(so that you don't see the same error message N times, once from
each of your N MPI processes); instead, it counts "new" instances
of the help message and displays a message every ~5 seconds when
there are new ones ("I got X new copies of the help message...")
opal_show_help and opal_output still exist, but they only output in
the current process. The intent for the new orte_* functions is that
they can apply job-level intelligence to the output. As such, we
recommend that all new ORTE and OMPI code use the new orte_*
functions, not thei opal_* functions.
=== New code ===
For ORTE and OMPI programmers, here's what you need to do differently
in new code:
* Do not include opal/util/show_help.h or opal/util/output.h.
Instead, include orte/util/output.h (this one header file has
declarations for both the orte_output() series of functions and
orte_show_help()).
* Effectively s/opal_output/orte_output/gi throughout your code.
Note that orte_output_open() takes a slightly different argument
list (as a way to pass data to the filtering stream -- see below),
so you if explicitly call opal_output_open(), you'll need to
slightly adapt to the new signature of orte_output_open().
* Literally s/opal_show_help/orte_show_help/. The function signature
is identical.
=== Notes ===
* orte_output'ing to stream 0 will do similar to what
opal_output'ing did, so leaving a hard-coded "0" as the first
argument is safe.
* For systems that do not use ORTE's RML or the HNP, the effect of
orte_output_* and orte_show_help will be identical to their opal
counterparts (the additional information passed to
orte_output_open() will be lost!). Indeed, the orte_* functions
simply become trivial wrappers to their opal_* counterparts. Note
that we have not tested this; the code is simple but it is quite
possible that we mucked something up.
= Filter Framework =
Messages sent view the new orte_* functions described above and
messages output via the IOF on the HNP will now optionally be passed
through a new "filter" framework before being output to
stdout/stderr. The "filter" OPAL MCA framework is intended to allow
preprocessing to messages before they are sent to their final
destinations. The first component that was written in the filter
framework was to create an XML stream, segregating all the messages
into different XML tags, etc. This will allow 3rd party tools to read
the stdout/stderr from the HNP and be able to know exactly what each
text message is (e.g., a help message, another OMPI infrastructure
message, stdout from the user process, stderr from the user process,
etc.).
Filtering is not active by default. Filter components must be
specifically requested, such as:
{{{
$ mpirun --mca filter xml ...
}}}
There can only be one filter component active.
= New MCA Parameters =
The new functionality described above introduces two new MCA
parameters:
* '''orte_base_help_aggregate''': Defaults to 1 (true), meaning that
help messages will be aggregated, as described above. If set to 0,
all help messages will be displayed, even if they are duplicates
(i.e., the original behavior).
* '''orte_base_show_output_recursions''': An MCA parameter to help
debug one of the known issues, described below. It is likely that
this MCA parameter will disappear before v1.3 final.
= Known Issues =
* The XML filter component is not complete. The current output from
this component is preliminary and not real XML. A bit more work
needs to be done to configure.m4 search for an appropriate XML
library/link it in/use it at run time.
* There are possible recursion loops in the orte_output() and
orte_show_help() functions -- e.g., if RML send calls orte_output()
or orte_show_help(). We have some ideas how to fix these, but
figured that it was ok to commit before feature freeze with known
issues. The code currently contains sub-optimal workarounds so
that this will not be a problem, but it would be good to actually
solve the problem rather than have hackish workarounds before v1.3 final.
This commit was SVN r18434.
Also set the 'best_priority' to the smallest 32 bit integer possible so negaive priority component can be selected if they are the highest ranking component available.
This commit was SVN r18427.
* Remove the opal_only option. This was suffering from bit rot, and no one uses it. It can be added back fairly easily if wanted.
* Cleanup metadata interactions at the local level.
* Touch up some of the INC funcitonality (fix typos and a minor ordering issue)
This commit was SVN r18416.
http://www.open-mpi.org/community/lists/devel/2008/04/3779.php
{{{
svn merge -r 18276:18380 https://svn.open-mpi.org/svn/ompi/tmp-public/jjh-mca-play .
}}}
Any components not in the trunk, but in one of the effected frameworks *must* be
updated. Contact the list, look at the RFC, or look at the diff for how to do this.
Sorry for the early commit of this, but I wanted to get it in today (per RFC) and
didn't know if I would have a chance later today.
This commit was SVN r18381.
The problem was caused by a bad ordering between the restart of the ORTE level tcp connections (in the OOB - out-of-band communication) and the Open MPI level tcp connections (BTLs). Before this commit ORTE would shutdown and restart the OOB completely before the OMPI level restarted its tcp connections. What would happen is that a socket descriptor used by the OMPI level on checkpoint was assigned to the ORTE level on restart. But the OMPI level had no knowledge that the socket descriptor it was previously using has been recycled so it closed it on restart. This caused the ORTE level to break as the newly created socket descriptor was closed without its knowledge.
The fix is to have the OMPI level shutdown tcp connections, allow the ORTE level to restart, and then allow the OMPi level to restart its connections. This seems obvious, and I'm surprised that this bug has not cropped up sooner. I'm confident that this specific problem has been fixed with this commit.
Thanks to Eric Roman and Tamer El Sayed for their help in identifying this problem, and patience while I was fixing it.
* Add a new state {{{OPAL_CRS_RESTART_PRE}}}. This state identifies when we are on the down slope of the INC (finalize-like) which is useful when you want to close, but not reopen a component set for fear of interfering with a lower level.
* Use this new state in OMPI level coordination. Here we want to make sure to play well with both the OMPI/BTL/TCP and ORTE/OOB/TCP components.
* Update ft_event functions in PML and BML to handle the new restart state.
* Add an additional flag to the error output in OOB/TCP so we can see what the socket descriptor was on failure as this can be helpful in debugging.
This commit was SVN r18276.
{{{
svn merge -r 18218:18240 https://svn.open-mpi.org/svn/ompi/tmp/jjh-scratch .
}}}
Contains:
* Primarily a fix for a user reported problem where a cached file descriptor is causing a SIGPIPE on restart.
* Cleanup some small memory leaks from using mca_base_param_env_var() - Thanks Jeff
* Cleanup ORTE FT tool compilation in non-FT builds - Thanks Tim P.
* Cleanup mpi interface with missplaced {{{OPAL_CR_ENTER_LIBRARY}}} - Thanks Terry
* Some other sundry cleanup items all dealing with C/R functionality in the trunk.
This commit was SVN r18241.
1. applied prefix rule to functions and variables of RMAPS rank_file component
2. cleaned ompi_mpi_init.c from paffinity code
3. paffinity code moved to new opal/mca/paffinity/base/paffinity_base_service.c file
4. added opal_paffinity_slot_list mca parameter
This commit was SVN r18019.
Greatly reduce the number of "foo" -> "opal_foo" symbol renames in the
libevent source, and instead greatly expand the event_rename.h file
that uses preprocessor macros to make all public symbols be
"opal_foo".
This commit was SVN r17923.
* The opal_sys_timer_get_cycles() call was implemented for
Sparc v9 using inline assembly, but not in the assembly files.
This would only currently matter on Linux Sparc systems using
a compiler that didn't support inline assembly (not many of
those), but it should be there for completion.
* The linux timer component would always build on non-Alpha
platforms, rather than only building on platforms where
opal_sys_timer_get_cycles() was implemented. This would
only matter on a very narrow set of platforms that we don't
really support, but still, it could be more right. We now
only build the component on platforms where we have the
assembly call to get the cycle counter.
* Added a comment to opal/sys/timer.h to note that the linux
timer component needed to be updated if another platform was
added.
This should be harmless to commit. It will only really change
behaviors on platforms we don't have assembly support for, which
currently won't make it through configure. It really only matters
when (if?) we support atomic operations through libatomic_ops.
This commit was SVN r17887.
This commit lowers the priority of the darwin backtrace component
below that of the ''execinfo'' and ''stackprint'' components, which
will cause OS X Leopard to use the ''execinfo'' component. execinfo
utilizes a public API for printing the stacktrace. The ''darwin''
component uses some evil hacks and a not-so supported package from
Apple to print the stack trace.
This commit was SVN r17840.
* Extension to the ESS framework to support C/R
* Fixed support for {{{snapc_base_establish_global_snapshot_dir}}}
* Fixed FileM support
* Misc. minor code modifications
There are some outstanding visability issues that I want to fix next.
This commit was SVN r17725.
Some MPI C interface files saw some spacing changes to conform to the coding standards of Open MPI.
Changed MPI C interface files to use {{{OPAL_CR_ENTER_LIBRARY()}}} and {{{OPAL_CR_EXIT_LIBRARY()}}} instead of just {{{OPAL_CR_TEST_CHECKPOINT_READY()}}}. This will allow the checkpoint/restart system more flexibility in how it is to behave.
Fixed the configure check for {{{--enable-ft-thread}}} so it has a know dependance on {{{--enable-mpi-thread}}} (and/or {{{--enable-progress-thread}}}).
Added a line for Checkpoint/Restart support to {{{ompi_info}}}.
Added some options to choose at runtime whether or not to use the checkpoint polling thread. By default, if the user asked for it to be compiled in, then it is used. But some users will want the ability to toggle its use at runtime.
There are still some places for improvement, but the feature works correctly. As always with Checkpoint/Restart, it is compiled out unless explicitly asked for at configure time. Further, if it was configured in, then it is not used unless explicitly asked for by the user at runtime.
This commit was SVN r17516.
by the checkpoint/restart feature. Other constraints could be enforced here,
but at the moment it is only the checkpointable constraint.
So this commit just removes this logic from non-c/r builds. If someone
wanted to add a new constraint in the future then there is a comment in
the code that directs them a bit.
This commit was SVN r17447.
implement specific function, thereby
removing bogus requirement on valgrind/valgrind.h
dough...
- Call specific function runindebugger() before
doing expensive checks on each component of struct.
- Get rid of void* warnings..
This commit was SVN r17438.
Update properties to ignore the carto_file_lex.c file since that is also dynamically generated.
Update the build-hgignore.pl to properly disregard DS_Store files
This commit was SVN r17301.
map_to_processor_id,
map_to_socket_core,
max_processor_id,
max_socket,
max_core.
In OS other then Linux, those functions will return OPAL_ERR_NOT_SUPPORTED.
--This Line, and those below, will be ignored--
M paffinity/linux/paffinity_linux_module.c
M paffinity/paffinity.h
M paffinity/base/base.h
M paffinity/base/paffinity_base_wrappers.c
M paffinity/windows/paffinity_windows_module.c
M paffinity/solaris/paffinity_solaris_module.c
This commit was SVN r17173.
about linkers, have all OPAL, ORTE, and OMPI components '''not'' link
against the OPAL, ORTE, or OMPI libraries.
See ttp://www.open-mpi.org/community/lists/users/2007/10/4220.php for
details (or https://svn.open-mpi.org/trac/ompi/wiki/Linkers for a
better-formatted version of the same info).
This commit was SVN r16968.
requesting it. This commit adds a bit of error checking to keep us from
participating in a checkpoint that we did not initiate and therefore are
not ready for.
Thanks to Paul Hargrove and Eric Roman for their help with this.
This commit was SVN r16694.
* Fix some missing includes in a few places.
* Add the cr_request() functionality to the BLCR CRS component.
We are now dependent upon the 0.6.* series of BLCR.
* Made the CR notification mechanism a registered function.
This way we can have an OPAL-only version and it can be replaced at
runtime with the ORTE version.
* Add a 'opal_cr_allow_opal_only' parameter that will enable OPAL-only
CR functionality when the user wants it. Default: Disabled.
* Fix the placement of a checkpoint request check in MPI_Init
* Pull the OPAL notification mechanism into the SnapC framework.
* We no longer fork/exec the 'opal-checkpoint' command for local
checkpointing, the Local coordinator in the orted does this directly.
* The Local and Application coordinator talk together bypassing the OPAL
notifiation mechanism.
* Optimized the Local <-> App Coordinator communication.
* Improved the structure used to track vpid_snapshots in the local coord.
* Fix a race condition in which an application under heavy communication load
may produce an inconsistent global checkpoint.
This commit was SVN r16389.
was taken form the $CWD to the storage directory. Now we just store directly
to the storage directory which can reduce NFS traffic if working in that mode.
A slight performance boost, but at the point you are using NFS you are paying
a penalty anyway. Now you just don't have to pay it twice :)
This commit was SVN r16099.
A subset of this patch needs to be applied to v1.2
Refs trac:928
This commit was SVN r15918.
The following Trac tickets were found above:
Ticket 928 --> https://svn.open-mpi.org/trac/ompi/ticket/928
was brought in. This supercedes the GLOBL patch that we had been using
with Libtool 2.1a versions prior to the lt_dladvise code. Autogen
tries to figure out which version you're on, so either will now work with
the trunk.
This commit was SVN r15903.
This is because internally 'self' uses dlopen to look at the application
running to determine if it can/should be used or not.
This commit was SVN r15673.
Remove the matching logic out of dynamic path into an
extra function. Add the corresponing check to the static
component path.
This commit was SVN r15458.
There are several interesting things:
1. less NFS traffic [as we potentially access less files]
2. faster loading time [in case the user tune it's execution environment]
3. (1) + (2) -> faster startup time [at least everything which do not depend on the network]
4. MX bug will go away if the pml is specified.
5. No useless BTL will be opened, which will solve few others issues.
This commit was SVN r15402.
* Remove the 'opal_mca_base_param_use_amca_sets' global variable
* Harness the fact that you can (read should) call the cmd_line functions
before initializing opal_init_util(). This pushes the MCA/GMCA/AMCA
command line options into the environment before OPAL inits and starts
to use these values. By putting the cmd_line parse before opal_init_util
in orterun and orted we only parse the *MCA parameter files once, and
correctly (alleviating the need to 'recache' the files on init.)
* Small bits of cleanup.
This commit was SVN r15219.
Ensure that the AM_CONDITIONALs are ''always'' run, even if we
--enable-mca-no-build the paffinity/linux component.
This commit was SVN r15095.
The following Trac tickets were found above:
Ticket 1057 --> https://svn.open-mpi.org/trac/ompi/ticket/1057
re-enabling compilation of this component.
However, it still won't compile because this component provides a
module finalize function which apparently somehow got dropped from the
paffinity base. Support for the paffinity module finalize function
needs to be re-added.
This commit was SVN r14915.
* Enable VPATH builds to work (slight tweak of r14895 -- mainly
because I already had it done when George committed :-) )
* Enable "make dist" to work properly for PLPA included mode
* Update plpa.h.in
* Update svn:ignore
Took relevant changes back to the main PLPA SVN as well.
This commit was SVN r14896.
The following SVN revision numbers were found above:
r14895 --> open-mpi/ompi@bb7b04e875
Changes paffinity interface to use a cpu mask for available/preferred cpus
rather than the current coarse grained paffinity that lets the OS choose
which processor.
Macros for setting and clearing masks are provided.
Solaris and windows changes have not been made. Solaris subdirectory has some
suggested changes - however the relevant man pages for the Solaris 10 APIs
have some ambiguity regarding order in which one create and sets a processor
set. As we did not have access to a solaris 10 machine we could not test to
see the correct way to do the work under solaris.
This commit was SVN r14887.
symbols in them and environ is defined only in the final application
(probably in crt1.o). Apple provides a function for getting at the
environment, so use that instead if it's available.
This commit was SVN r14857.
* Require Autoconf 2.60 or higher and remove some cruft
required for AC 2.59 or the AC 2.59 / AC 2.60 mix
* Remove a bunch of now unnecessary AC_SUBST calls
* Use the libtool-provided variables for the -I and
library to use when compiling against ltdl
Fixes trac:1000
This commit was SVN r14652.
The following Trac tickets were found above:
Ticket 1000 --> https://svn.open-mpi.org/trac/ompi/ticket/1000
Protect the free and strdup values for replacing keyval pairs just as we do
below in the files for new keyval pairs.
In basic testing this seems to make everything work as it should again.
This commit was SVN r14460.
The following Trac tickets were found above:
Ticket 1002 --> https://svn.open-mpi.org/trac/ompi/ticket/1002
finally brings in functionality that is already on the 1.2 branch, and
was developed and tested in the v1.2ofed branch (and other places).
Short version of new features:
* Support for ibv_fork_init()
* Automatically fill in the openib BTL bandwidth value by
querying the HCA port
* Installdirs functionality
* Fixes to always use -I in the Fortran wrapper compilers (#924)
* Gleb's mpool updates
* Remove some kruft in btl/openib/configure.m4, therefore
fixing the harmless warnings noted in #665
* Bunches of updates to the Linux RPM spec file
I.e., effectively the same thing that r14411 brought to the v1.2
branch.
Also effectively brought in r14432 and r14433 (some fixes on top of
the original r14411 commit to v1.2). Still need to bring in the moral
equivalent of r14445 after this commit (fixes to installdirs).
This commit was SVN r14449.
The following SVN revision numbers were found above:
r14411 --> open-mpi/ompi@83b31314ae
r14432 --> open-mpi/ompi@a48f160595
r14433 --> open-mpi/ompi@68f346d2bc
r14445 --> open-mpi/ompi@13d366b827
Per discussions with Brian and Ralph, make a slight correction in
where components are installed. Use $pkglibdir, not $libdir/openmpi,
so that when compiled in the orte trunk, components are installed to
the right directory (because the component search patch is checking
$pkglibdir).
This commit was SVN r14345.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r14289
- Add signal handler BLCR register (helps with debugging)
- ifdef out the cr_request_file section for checkpointing self.
There is a bug with the 0.4.2 version of BLCR such that this
does not handle moving checkpoint files around.
I'm following up with the BLCR folks on this one (and checking
the newest release).
This commit was SVN r14069.
This merge adds Checkpoint/Restart support to Open MPI. The initial
frameworks and components support a LAM/MPI-like implementation.
This commit follows the risk assessment presented to the Open MPI core
development group on Feb. 22, 2007.
This commit closes trac:158
More details to follow.
This commit was SVN r14051.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r13912
The following Trac tickets were found above:
Ticket 158 --> https://svn.open-mpi.org/trac/ompi/ticket/158
builds, so disable it there
* On 10.4.8 (and possibly others), siginfo is NULL in the signal
callback on 64 bit Intel builds, so account for that in the signal
callback.
This commit was SVN r14045.
- mca_base_param_file_prefix
(Default: NULL)
This is the fullname of the "-am" mpirun option. Used to specify a ':'
separated list of AMCA parameter set files.
- mca_base_param_file_path
(Default: $SYSCONFDIR/amca-param-sets/:$CWD)
The path to search for AMCA files with relative paths. A warning will be
printed if the AMCA file cannot be found.
* Added a new function "mca_base_param_recache_files" the re-reads the file
configurations. This is used internally to help bootstrap the MCA system.
* Added a new orterun/mpirun command line option '-am' that aliases for the
mca_base_param_file_prefix MCA parameter
* Exposed the opal_path_access function as it is generally useful in other
places in the code.
* New function "opal_cmd_line_make_opt_mca" which will allow you to append a
new command line option with MCA parameter identifiers to set at the same
time. Previously this could only be done at command line declaration time.
* Added a new directory under the $pkgdatadir named "amca-param-sets" where all
the 'shipped with' Open MPI AMCA parameter sets are placed. This is the first
place to search for AMCA sets with relative paths.
* An example.conf AMCA parameter set file is located in
contrib/amca-param-sets/.
* Jeff Squyres contributed an OpenIB AMCA set for benchmarking.
Note: You will need to autogen with this commit as it adds a configure param.
Sorry :(
This commit was SVN r13867.
timers might natively return nanoseconds instead of microseconds, as is
the case on x86. Fixes an issue with really high shared memory latencies
on Intel macs
This commit was SVN r13038.
components that use configure.m4 for configuration or are always built.
The macro has not been needed since moving to configure types other than
configure.stub
Fixes trac:590
This commit was SVN r13031.
The following Trac tickets were found above:
Ticket 590 --> https://svn.open-mpi.org/trac/ompi/ticket/590
* Have darwin backtrace code return an error when buffer() is
called, since it is not imnplemented
* Print out hostname & pid when giving signal information
* If backtrace_buffer() is implemented, use that instead of
backtrace_print() and prefix stacktrace with the hostname
* Make the signal information printed be more user friendly
* If we're using the backtrace_buffer() code, don't print
the last two functions (which will be show_stackframe()
then backtrace_buffer()) so that users won't keep thinking
the error occurred inside Open MPI (sneaky, yes...)
Refs trac:538
This commit was SVN r12883.
The following Trac tickets were found above:
Ticket 538 --> https://svn.open-mpi.org/trac/ompi/ticket/538
whether they are prefixed with a double underscore or not.
__DARWIN_UNIX03 is defined on Tiger when compiling PPC 64 code, so
we can't use that.
Refs trac:575
This commit was SVN r12418.
The following Trac tickets were found above:
Ticket 575 --> https://svn.open-mpi.org/trac/ompi/ticket/575
renamed the register fields in the thread state structures. Support compiling
with either the old or new names, keying off the UNIX03 define (which is what
the 10.5 headers do).
Refs trac:450
This commit was SVN r12285.
The following Trac tickets were found above:
Ticket 450 --> https://svn.open-mpi.org/trac/ompi/ticket/450
* Make sure to AC_SUBST the backtrace CFLAGS so that the right flags
are passed to the component (especially -m64)
* Properly open / close the component. This isn't strictly necessary
to fix the bug, but was an oversight that should be fixed.
This commit was SVN r11806.
The following Trac tickets were found above:
Ticket 405 --> https://svn.open-mpi.org/trac/ompi/ticket/405
* Use $31 instead of mnemonic zero for the gcc inline
assembly test, as the GNU assembler doesn't like
zero, but both Tru64 and GNU assembler should be fine
with $31
* Disable Linux timer component on Alpha. The CPU timer
rolls over every 10 seconds or less, so it's kinda
worthless for our needs.
* Fix some escaping issues when local functions are
denoted with a $
* Remove C++ comments from the Alpha assembly.
* Add base assembly code for the non-inlined functions
on Alpha
This commit was SVN r11764.
The same treatement will happens on all sub-projects. The .h files
have to be C++ compatibles and all symbols with an external visibility
have to get the {PROJECT}_DECLSPEC in front of the prototype.
This commit was SVN r11340.
range of OS friendly path management functions, such as opal_basename
opal_dirname. They should always be used instead of basename and
dirname. There are several functions which allow us to create paths
that are compatible with the OS.
The OPAL_ENV_SEP define should be used (instead of ':') when a env
variable is splitted.
This commit was SVN r11336.
Windows version for the libevent. The one they provide is more than
innapropriate for what we need (without talking about the fact that
the code is just plain wrong).
This commit was SVN r11329.
environment variables.
- The HOME on Windows is called USERPROFILE.
- C++ compilers (at least on Windows) require explicit casts. Even going
through a void* does not help.
- Cleanup the Windows file name management.
- Always use opal_os_path to create OS friendly paths.
This commit was SVN r11311.
