#define CACHE_LINE_SIZE to 128. This name has a conflict on NetBSD,
and it seems kinda odd to have a header file that ''only'' defines a
single value. Also, we'll soon be raising hwloc to be a first-class
item, so having this file around seemed kinda weird.
Therefore, I replaced CACHE_LINE_SIZE with opal_cache_line_size, an
int (in opal/runtime/opal_init.c and opal/runtime/opal.h) on the
rationale that we can fill this in at runtime with hwloc info (trunk
and v1.5/beyond, only). The only place we ''needed'' a compile-time
CACHE_LINE_SIZE was in the BTL SM (for struct padding), so I made a
new BTL_SM_ preprocessor macro with the old CACHE_LINE_SIZE value
(128). That use isn't suitable for run-time hwloc information,
anyway.
This commit was SVN r23349.
* Remove OPAL_ERR_PAFFINITY_NOT_SUPPORTED; fit it into the generic
OPAL_ERR_NOT_SUPPORTED case.
* When odls_default detects that processor affinity is not supported,
it prints a specific message about it, and then it suppressed a
generic HNP help message that would normally follow it (i.e., it's
easier to have the "processor affinity is not supported" show_help
message last).
* Use some symbolic names in odls_default instead of fixed int's,
just for slight readability improvements in the code.
* Introduce orte_show_help_suppress(), which gives the ability to
suppress any future showings of any arbitrary show_help() message.
This is useful if you display message X and want to suppress
message Y. This suppression *only* works in environments where
orte_show_help() does coalescing.
This commit was SVN r23249.
(OMPI_ERR_* = OPAL_SOS_GET_ERR_CODE(ret)), since the return value could be a
SOS-encoded error. The OPAL_SOS_GET_ERR_CODE() takes in a SOS error and returns
back the native error code.
* Since OPAL_SUCCESS is preserved by SOS, also change all calls of the form
(OPAL_ERROR == ret) to (OPAL_SUCCESS != ret). We thus avoid having to
decode 'ret' to get the native error code.
This commit was SVN r23162.
It is okay to not have a paffinity module IF you aren't using paffinity anyway. So don't error out of MPI_Init because a paffinity module wasn't selected.
Cleanup error reporting in the odls default module to (once and for all!) eliminate messages originating in the fork'd process. Create some new error codes to allow us to pass enough info back to the parent process to provide useful error messages.
This commit was SVN r23106.
Many of the OPAL_ENABLE_FT should be OPAL_ENABLE_FT_CR, so fix those.
The OPAL Layer INC should call opal_output on restart so that it can refresh the string it prints to reflect the current pid/hostname which may have changed.
This commit was SVN r22824.
anything for non-MPI apps. Oops! (But before you freak out, gentle
reader, note that mpi_paffinity_alone for MPI apps still worked fine)
When we made the switchover somewhere in the 1.3 series to have the
orted's do processor binding, then stuff like:
mpirun --mca mpi_paffinity_alone 1 hostname
should have bound hostname to processor 0. But it didn't because of a
subtle startup ordering issue: the MCA param registration for
opal_paffinity_alone was in the paffinity base (vs. being in
opal/runtime/opal_params.c), but it didn't actually get registered
until after the global variable opal_paffinity_alone was checked to
see if we wanted old-style affinity bindings. Oops.
However, for MPI apps, even though the orted didn't do the binding,
ompi_mpi_init() would notice that opal_paffinity_alone was set, yet
the process didn't seem to be bound. So the MPI process would bind
itself (this was done to support the running-without-orteds
scenarios). Hence, MPI apps still obeyed mpi_paffinity_alone
semantics.
But note that the error described above caused the new mpirun switch
--report-bindings to not work with mpi_paffinity_alone=1, meaning that
the orted would not report the bindings when mpi_paffinity_alone was
set to 1 (it ''did'' correctly report bindings if you used
--bind-to-core or one of the other binding options).
This commit separates out the paffinity base MCA param registration
into a small function that can be called at the Right place during the
startup sequence.
This commit was SVN r22602.
friends also receive &argc and &argv (George asked Jeff to Ralph to
review before committing). The thought is that passing argv and argc
to opal/orte_init be useful to other projects outside of OMPI that are
using OPAL and/or ORTE (especially in conjunction with some other
bootstrapping code where it is helpful to modify argv). It's such a
small thing that it's easy to apply here to make others' lives a
little easier.
Ask George for more details; I'm just the messenger. :-)
Judging by the copyrights on this patch, it's been around for a
while. :-)
This commit was SVN r22260.
This commit looks larger than it really is since it includes a fair amount of code cleanup.
The SIGSTOP/SIGCONT+checkpointing work uses some of the functionality in r20391. Basic use case below (note that the checkpoint generated is useable as usual if the stopped application is terminated).
{{{
shell 1) mpirun -np 2 -am ft-enable-cr my-app
... running ...
shell 2) ompi-checkpoint --stop -v MPIRUN_PID
[localhost:001300] [ 0.00 / 0.20] Requested - ...
[localhost:001300] [ 0.00 / 0.20] Pending - ...
[localhost:001300] [ 0.01 / 0.21] Running - ...
[localhost:001300] [ 1.01 / 1.22] Stopped - ompi_global_snapshot_1234.ckpt
Snapshot Ref.: 0 ompi_global_snapshot_1234.ckpt
shell 2) killall -CONT mpirun
... Application Continues execution in shell 1 ...
}}}
Other items in this commit are mostly cleanup that has been sitting off-trunk for too long:
* Add a new {{{opal_crs_base_ckpt_options_t}}} type that encapsulates the various options that could be passed to the CRS. Currently only TERM and STOP, but this makes adding others ''much'' easier.
* Eliminate ORTE_SNAPC_CKPT_STATE_PENDING_TERM, since it served a redundant purpose with the new options type.
* Lay some basic ground work for some future features.
This commit was SVN r21995.
The following SVN revision numbers were found above:
r20391 --> open-mpi/ompi@0704b98668
#if defined (c_plusplus)
defined (__cplusplus)
followed by
extern "C" {
and the closing counterpart by BEGIN_C_DECLS and END_C_DECLS.
Notable exceptions are:
- opal/include/opal_config_bottom.h:
This is our generated code, that itself defines BEGIN_C_DECL and
END_C_DECL
- ompi/mpi/cxx/mpicxx.h:
Here we do not include opal_config_bottom.h:
- Belongs to external code:
opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.c
opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.h
- opal/include/opal/prefetch.h:
Has C++ specific macros that are protected:
- Had #if ... } #endif _and_ END_C_DECLS (aka end up with 2x
END_C_DECLS)
ompi/mca/btl/openib/btl_openib.h
- opal/event/event.h has #ifdef __cplusplus as BEGIN_C_DECLS...
- opal/win32/ompi_process.h: had extern "C"\n {...
opal/win32/ompi_process.h: dito
- ompi/mca/btl/pcie/btl_pcie_lex.l: needed to add *_C_DECLS
ompi/mpi/f90/test/align_c.c: dito
- ompi/debuggers/msgq_interface.h: used #ifdef __cplusplus
- ompi/mpi/f90/xml/common-C.xsl: Amend
Tested on linux using --with-openib and --with-mx
The following do not contain either opal_config.h, orte_config.h or
ompi_config.h
(but possibly other header files, that include one of the above):
ompi/mca/bml/r2/bml_r2_ft.h
ompi/mca/btl/gm/btl_gm_endpoint.h
ompi/mca/btl/gm/btl_gm_proc.h
ompi/mca/btl/mx/btl_mx_endpoint.h
ompi/mca/btl/ofud/btl_ofud_endpoint.h
ompi/mca/btl/ofud/btl_ofud_frag.h
ompi/mca/btl/ofud/btl_ofud_proc.h
ompi/mca/btl/openib/btl_openib_mca.h
ompi/mca/btl/portals/btl_portals_endpoint.h
ompi/mca/btl/portals/btl_portals_frag.h
ompi/mca/btl/sctp/btl_sctp_endpoint.h
ompi/mca/btl/sctp/btl_sctp_proc.h
ompi/mca/btl/tcp/btl_tcp_endpoint.h
ompi/mca/btl/tcp/btl_tcp_ft.h
ompi/mca/btl/tcp/btl_tcp_proc.h
ompi/mca/btl/template/btl_template_endpoint.h
ompi/mca/btl/template/btl_template_proc.h
ompi/mca/btl/udapl/btl_udapl_eager_rdma.h
ompi/mca/btl/udapl/btl_udapl_endpoint.h
ompi/mca/btl/udapl/btl_udapl_mca.h
ompi/mca/btl/udapl/btl_udapl_proc.h
ompi/mca/mtl/mx/mtl_mx_endpoint.h
ompi/mca/mtl/mx/mtl_mx.h
ompi/mca/mtl/psm/mtl_psm_endpoint.h
ompi/mca/mtl/psm/mtl_psm.h
ompi/mca/pml/cm/pml_cm_component.h
ompi/mca/pml/csum/pml_csum_comm.h
ompi/mca/pml/dr/pml_dr_comm.h
ompi/mca/pml/dr/pml_dr_component.h
ompi/mca/pml/dr/pml_dr_endpoint.h
ompi/mca/pml/dr/pml_dr_recvfrag.h
ompi/mca/pml/example/pml_example.h
ompi/mca/pml/ob1/pml_ob1_comm.h
ompi/mca/pml/ob1/pml_ob1_component.h
ompi/mca/pml/ob1/pml_ob1_endpoint.h
ompi/mca/pml/ob1/pml_ob1_rdmafrag.h
ompi/mca/pml/ob1/pml_ob1_recvfrag.h
ompi/mca/pml/v/pml_v_output.h
opal/include/opal/prefetch.h
opal/mca/timer/aix/timer_aix.h
opal/util/qsort.h
test/support/components.h
This commit was SVN r21855.
The following SVN revision numbers were found above:
r2 --> open-mpi/ompi@58fdc18855
OMPI
and a language agnostic part in OPAL. The convertor is completely
moved into OPAL. This offers several benefits as described in RFC
http://www.open-mpi.org/community/lists/devel/2009/07/6387.php
namely:
- Fewer basic types (int* and float* types, boolean and wchar
- Fixing naming scheme to ompi-nomenclature.
- Usability outside of the ompi-layer.
- Due to the fixed nature of simple opal types, their information is
completely
known at compile time and therefore constified
- With fewer datatypes (22), the actual sizes of bit-field types may be
reduced
from 64 to 32 bits, allowing reorganizing the opal_datatype
structure, eliminating holes and keeping data required in convertor
(upon send/recv) in one cacheline...
This has implications to the convertor-datastructure and other parts
of the code.
- Several performance tests have been run, the netpipe latency does not
change with
this patch on Linux/x86-64 on the smoky cluster.
- Extensive tests have been done to verify correctness (no new
regressions) using:
1. mpi_test_suite on linux/x86-64 using clean ompi-trunk and
ompi-ddt:
a. running both trunk and ompi-ddt resulted in no differences
(except for MPI_SHORT_INT and MPI_TYPE_MIX_LB_UB do now run
correctly).
b. with --enable-memchecker and running under valgrind (one buglet
when run with static found in test-suite, commited)
2. ibm testsuite on linux/x86-64 using clean ompi-trunk and ompi-ddt:
all passed (except for the dynamic/ tests failed!! as trunk/MTT)
3. compilation and usage of HDF5 tests on Jaguar using PGI and
PathScale compilers.
4. compilation and usage on Scicortex.
- Please note, that for the heterogeneous case, (-m32 compiled
binaries/ompi), neither
ompi-trunk, nor ompi-ddt branch would successfully launch.
This commit was SVN r21641.
* Pass the sequence number of the checkpoint along with reference from the global to the local coordinator.
* 'orte-restart --apponly' now just generates the app context file, and does not run with it. This provides the user the ability to edit the file before launching.
* Add a OPAL_CRS_NONE state
* Split the INC into three distinct parts.
* Implement a restart mechanism for the 'none' component. If given a context it simply execvp()'s it.
This commit was SVN r21195.
OMPI_* to OPAL_*. This allows opal layer to be used more independent
from the whole of ompi.
NOTE: 9 "svn mv" operations immediately follow this commit.
This commit was SVN r21180.
This patch contains the following items:
* Fix the flag passed to open() for the read side of the named pipe between the local and app coordinator. There is a race condition when using O_RDWR on a named pipe (not sure how that bug got in there in the first place).
* Adjust control in the C/R thread timing
* Clarify return code in BLCR component
* Allow the user to adjust the max wait time for the named pipes in the FileM local coordinator by using the MCA parameter "snapc_full_max_wait_time" (Default: 20 seconds)
* If the application terminates while there are active FileM operations, force mpirun to wait on these operations to complete.
* Allow the user to set the local copy command (Default: cp) via MCA parameter "filem_rsh_cp"
* Implement the ability to throttle the number of outgoing connections in FileM. At larger scales this type of explicit throttling helps prevent overwhelming the HNP machine. Default: 10, set via MCA parameter: {{{filem_rsh_max_outgoing}}}
This commit was SVN r21167.
The following SVN revision numbers were found above:
r21131 --> open-mpi/ompi@0deb009225
- Delete unnecessary header files using
contrib/check_unnecessary_headers.sh after applying
patches, that include headers, being "lost" due to
inclusion in one of the now deleted headers...
In total 817 files are touched.
In ompi/mpi/c/ header files are moved up into the actual c-file,
where necessary (these are the only additional #include),
otherwise it is only deletions of #include (apart from the above
additions required due to notifier...)
- To get different MCAs (OpenIB, TM, ALPS), an earlier version was
successfully compiled (yesterday) on:
Linux locally using intel-11, gcc-4.3.2 and gcc-SVN + warnings enabled
Smoky cluster (x86-64 running Linux) using PGI-8.0.2 + warnings enabled
Lens cluster (x86-64 running Linux) using Pathscale-3.2 + warnings enabled
This commit was SVN r21096.
1. Probe the signal number that we want
1. If a handler is already installed there:
1. if the opal_signal MCA param entry for this signal is suffixed
with ":complain", then output a show_help message
1. do not install our signal handler
1. otherwise, install our signal handler
Hence, we've shifted to a policy of only complaining if the user asks
us to complain.
This commit was SVN r20969.
The following Trac tickets were found above:
Ticket 1871 --> https://svn.open-mpi.org/trac/ompi/ticket/1871
In case we use memcmp, strlen, strup and friends include <string.h>
Also several constants.h are not included directly
- Let's have mca_topo_base_cart_create return ompi-errors in
ompi/mca/topo/base/topo_base_cart_create.c
This commit was SVN r20773.
get bitten by header depending on having already included
the corresponding [opal|orte|ompi]_config.h header.
When separating, things like [OPAL|ORTE|OMPI]_DECLSPEC
are missed.
Script to add the corresponding header in front of all following
(taking care of possible #ifdef HAVE_...)
- Including some minor cleanups to
- ompi/group/group.h -- include _after_ #ifndef OMPI_GROUP_H
- ompi/mca/btl/btl.h -- nclude _after_ #ifndef MCA_BTL_H
- ompi/mca/crcp/bkmrk/crcp_bkmrk_btl.c -- still no need for
orte/util/output.h
- ompi/mca/pml/dr/pml_dr_recvreq.c -- no need for mpool.h
- ompi/mca/btl/btl.h -- reorder to fit
- ompi/mca/bml/bml.h -- reorder to fit
- ompi/runtime/ompi_mpi_finalize.c -- reorder to fit
- ompi/request/request.h -- additionally need ompi/constants.h
- Tested on linux/x86-64
This commit was SVN r20720.
1. minor modification to include two new opal MCA params:
(a) opal_profile: outputs what components were selected by each framework
currently enabled for most, but not all, frameworks
(b) opal_profile_file: name of file that contains profile info required
for modex
2. introduction of two new tools:
(a) ompi-probe: MPI process that simply calls MPI_Init/Finalize with
opal_profile set. Also reports back the rml IP address for all
interfaces on the node
(b) ompi-profiler: uses ompi-probe to create the profile_file, also
reports out a summary of what framework components are actually
being used to help with configuration options
3. modification of the grpcomm basic component to utilize the
profile file in place of the modex where possible
4. modification of orterun so it properly sees opal mca params and
handles opal_profile correctly to ensure we don't get its profile
5. similar mod to orted as for orterun
6. addition of new test that calls orte_init followed by calls to
grpcomm.barrier
This is all completely benign unless actively selected. At the moment, it only supports modex-less launch for openib-based systems. Minor mod to the TCP btl would be required to enable it as well, if people are interested. Similarly, anyone interested in enabling other BTL's for modex-less operation should let me know and I'll give you the magic details.
This seems to significantly improve scalability provided the file can be locally located on the nodes. I'm looking at an alternative means of disseminating the info (perhaps in launch message) as an option for removing that constraint.
This commit was SVN r20098.
This happens with really long paths as part of the variable name.
Found in MTT testing (where the paths are long). This will need to be moved to v1.3
This commit was SVN r19989.
There is still a problem with OpenIB and threads (external to C/R functionality). It has been reported in Ticket #1539
Additionally:
* Fix a file cleanup bug in CRS Base.
* Fix a possible deadlock in the TCP ft_event function
* Add a mca_base_param_deregister() function to MCA base
* Add whole process checkpoint timers
* Add support for BTL: OpenIB, MX, Shared Memory
* Add support Mpool: rdma, sm
* Sundry bounds checking an cleanup in some scattered functions
This commit was SVN r19756.
Fix a finalize bug with the C/R thread. There is a race in the way we were finalizing the C/R thread such that, given a particular interleaving of threads, the pthread_join would stall because the C/R thread was never released properly.
Found in MTT regression testing on Odin.
All and all if you were not compiling with FT & threading support you would never see this problem.
This commit was SVN r19708.
Short version: remove opal_paffinity_alone and restore
mpi_paffinity_alone. ORTE makes various information available for the
MPI layer to decide what it wants to do in terms of processor
affinity.
Details:
* remove opal_paffinity_alone MCA param; restore mpi_paffinity_alone
MCA param
* move opal_paffinity_slot_list param registration to paffinity base
* ompi_mpi_init() calls opal_paffinity_base_slot_list_set(); if that
succeeds use that. If no slot list was set, see if
mpi_paffinity_alone was set. If so, bind this process to its Node
Local Rank (NLR). The NLR is the ORTE-maintained slot ID; if you
COMM_SPAWN to a host in this ORTE universe that already has procs
on it, the NLR for the new job will start at N (not 0). So this is
slightly better than mpi_paffinity_alone in the v1.2 series.
* If a slot list is specified *and* mpi_paffinity_alone is set, we
display an error and abort.
* Remove calls from rmaps/rank_file component to register and lookup
opal_paffinity mca params.
* Remove code in orte/odls that set affinities - instead, have them
just pass a slot_list if it exists.
* Cleanup the orte/odls code that determined
oversubscribed/want_processor as these were just opposites of each
other.
This commit was SVN r18874.
The following Trac tickets were found above:
Ticket 1383 --> https://svn.open-mpi.org/trac/ompi/ticket/1383
Add a new function to opal_progress that tells us our recursion depth to support that solution.
Yes, I know this sounds picky, but good ol' Jeff managed to make it happen by driving his cluster near to death...
Also ensure that we declare "failed" for the daemon job when daemons fail instead of the application job. This is important so that orte knows that it cannot use xcast to tell daemons to "exit", nor should it expect all daemons to respond. Otherwise, it is possible to hang.
After lots of testing, decide to default (again) to slurm detecting failed orteds. This proved necessary to avoid rather annoying hangs that were difficult to recover from. There are conditions where slurm will fail to launch all daemons (slurm folks are working on it), and yet again, good ol' Jeff managed to find both of them.
Thanks you Jeff! :-/
This commit was SVN r18611.
to modify the callback array (add or remove), make sure we don't call
the same callback twice if it get remove in another thread.
This commit was SVN r18608.
made in r18345 for ompi_version_string. This was done per request from Jeff
Squyres to maintain consistency and to remove some warnings caused by the
non-use of some static const char.
This commit was SVN r18461.
The following SVN revision numbers were found above:
r18345 --> open-mpi/ompi@8dd0421015
such, the commit message back to the master SVN repository is fairly
long.
= ORTE Job-Level Output Messages =
Add two new interfaces that should be used for all new code throughout
the ORTE and OMPI layers (we already make the search-and-replace on
the existing ORTE / OMPI layers):
* orte_output(): (and corresponding friends ORTE_OUTPUT,
orte_output_verbose, etc.) This function sends the output directly
to the HNP for processing as part of a job-specific output
channel. It supports all the same outputs as opal_output()
(syslog, file, stdout, stderr), but for stdout/stderr, the output
is sent to the HNP for processing and output. More on this below.
* orte_show_help(): This function is a drop-in-replacement for
opal_show_help(), with two differences in functionality:
1. the rendered text help message output is sent to the HNP for
display (rather than outputting directly into the process' stderr
stream)
1. the HNP detects duplicate help messages and does not display them
(so that you don't see the same error message N times, once from
each of your N MPI processes); instead, it counts "new" instances
of the help message and displays a message every ~5 seconds when
there are new ones ("I got X new copies of the help message...")
opal_show_help and opal_output still exist, but they only output in
the current process. The intent for the new orte_* functions is that
they can apply job-level intelligence to the output. As such, we
recommend that all new ORTE and OMPI code use the new orte_*
functions, not thei opal_* functions.
=== New code ===
For ORTE and OMPI programmers, here's what you need to do differently
in new code:
* Do not include opal/util/show_help.h or opal/util/output.h.
Instead, include orte/util/output.h (this one header file has
declarations for both the orte_output() series of functions and
orte_show_help()).
* Effectively s/opal_output/orte_output/gi throughout your code.
Note that orte_output_open() takes a slightly different argument
list (as a way to pass data to the filtering stream -- see below),
so you if explicitly call opal_output_open(), you'll need to
slightly adapt to the new signature of orte_output_open().
* Literally s/opal_show_help/orte_show_help/. The function signature
is identical.
=== Notes ===
* orte_output'ing to stream 0 will do similar to what
opal_output'ing did, so leaving a hard-coded "0" as the first
argument is safe.
* For systems that do not use ORTE's RML or the HNP, the effect of
orte_output_* and orte_show_help will be identical to their opal
counterparts (the additional information passed to
orte_output_open() will be lost!). Indeed, the orte_* functions
simply become trivial wrappers to their opal_* counterparts. Note
that we have not tested this; the code is simple but it is quite
possible that we mucked something up.
= Filter Framework =
Messages sent view the new orte_* functions described above and
messages output via the IOF on the HNP will now optionally be passed
through a new "filter" framework before being output to
stdout/stderr. The "filter" OPAL MCA framework is intended to allow
preprocessing to messages before they are sent to their final
destinations. The first component that was written in the filter
framework was to create an XML stream, segregating all the messages
into different XML tags, etc. This will allow 3rd party tools to read
the stdout/stderr from the HNP and be able to know exactly what each
text message is (e.g., a help message, another OMPI infrastructure
message, stdout from the user process, stderr from the user process,
etc.).
Filtering is not active by default. Filter components must be
specifically requested, such as:
{{{
$ mpirun --mca filter xml ...
}}}
There can only be one filter component active.
= New MCA Parameters =
The new functionality described above introduces two new MCA
parameters:
* '''orte_base_help_aggregate''': Defaults to 1 (true), meaning that
help messages will be aggregated, as described above. If set to 0,
all help messages will be displayed, even if they are duplicates
(i.e., the original behavior).
* '''orte_base_show_output_recursions''': An MCA parameter to help
debug one of the known issues, described below. It is likely that
this MCA parameter will disappear before v1.3 final.
= Known Issues =
* The XML filter component is not complete. The current output from
this component is preliminary and not real XML. A bit more work
needs to be done to configure.m4 search for an appropriate XML
library/link it in/use it at run time.
* There are possible recursion loops in the orte_output() and
orte_show_help() functions -- e.g., if RML send calls orte_output()
or orte_show_help(). We have some ideas how to fix these, but
figured that it was ok to commit before feature freeze with known
issues. The code currently contains sub-optimal workarounds so
that this will not be a problem, but it would be good to actually
solve the problem rather than have hackish workarounds before v1.3 final.
This commit was SVN r18434.
* Remove the opal_only option. This was suffering from bit rot, and no one uses it. It can be added back fairly easily if wanted.
* Cleanup metadata interactions at the local level.
* Touch up some of the INC funcitonality (fix typos and a minor ordering issue)
This commit was SVN r18416.
The problem was caused by a bad ordering between the restart of the ORTE level tcp connections (in the OOB - out-of-band communication) and the Open MPI level tcp connections (BTLs). Before this commit ORTE would shutdown and restart the OOB completely before the OMPI level restarted its tcp connections. What would happen is that a socket descriptor used by the OMPI level on checkpoint was assigned to the ORTE level on restart. But the OMPI level had no knowledge that the socket descriptor it was previously using has been recycled so it closed it on restart. This caused the ORTE level to break as the newly created socket descriptor was closed without its knowledge.
The fix is to have the OMPI level shutdown tcp connections, allow the ORTE level to restart, and then allow the OMPi level to restart its connections. This seems obvious, and I'm surprised that this bug has not cropped up sooner. I'm confident that this specific problem has been fixed with this commit.
Thanks to Eric Roman and Tamer El Sayed for their help in identifying this problem, and patience while I was fixing it.
* Add a new state {{{OPAL_CRS_RESTART_PRE}}}. This state identifies when we are on the down slope of the INC (finalize-like) which is useful when you want to close, but not reopen a component set for fear of interfering with a lower level.
* Use this new state in OMPI level coordination. Here we want to make sure to play well with both the OMPI/BTL/TCP and ORTE/OOB/TCP components.
* Update ft_event functions in PML and BML to handle the new restart state.
* Add an additional flag to the error output in OOB/TCP so we can see what the socket descriptor was on failure as this can be helpful in debugging.
This commit was SVN r18276.
{{{
svn merge -r 18218:18240 https://svn.open-mpi.org/svn/ompi/tmp/jjh-scratch .
}}}
Contains:
* Primarily a fix for a user reported problem where a cached file descriptor is causing a SIGPIPE on restart.
* Cleanup some small memory leaks from using mca_base_param_env_var() - Thanks Jeff
* Cleanup ORTE FT tool compilation in non-FT builds - Thanks Tim P.
* Cleanup mpi interface with missplaced {{{OPAL_CR_ENTER_LIBRARY}}} - Thanks Terry
* Some other sundry cleanup items all dealing with C/R functionality in the trunk.
This commit was SVN r18241.
1. applied prefix rule to functions and variables of RMAPS rank_file component
2. cleaned ompi_mpi_init.c from paffinity code
3. paffinity code moved to new opal/mca/paffinity/base/paffinity_base_service.c file
4. added opal_paffinity_slot_list mca parameter
This commit was SVN r18019.
