Collect the base 'orted' command line into a base function since most of the
PLS components were duplicating this code. Add AMCA parameter command line
component to the base set.
Add Aggregate MCA parameter support to the following PLS components:
- gridengine
- process
- slurm
- poe
- tm
Improve support for 'rsh' component.
Did/could not support the following components:
- bproc
- proxy
- xcpu
- cnos
- xgrid
The above components had peculiar needs that made it non-trivial to add an
option. The authors of these components need to help in supporting this
new option.
I was only able to test the SLURM and RSH components due to system availability.
The others should work without problem.
This commit was SVN r14284.
The following Trac tickets were found above:
Ticket 976 --> https://svn.open-mpi.org/trac/ompi/ticket/976
deal with the PLS RSH. Remove support for unknown user (i.e. if the user is
not known by the system, then it shouldn't be allowed to spawn anything).
This commit was SVN r14232.
This merge adds Checkpoint/Restart support to Open MPI. The initial
frameworks and components support a LAM/MPI-like implementation.
This commit follows the risk assessment presented to the Open MPI core
development group on Feb. 22, 2007.
This commit closes trac:158
More details to follow.
This commit was SVN r14051.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r13912
The following Trac tickets were found above:
Ticket 158 --> https://svn.open-mpi.org/trac/ompi/ticket/158
- mca_base_param_file_prefix
(Default: NULL)
This is the fullname of the "-am" mpirun option. Used to specify a ':'
separated list of AMCA parameter set files.
- mca_base_param_file_path
(Default: $SYSCONFDIR/amca-param-sets/:$CWD)
The path to search for AMCA files with relative paths. A warning will be
printed if the AMCA file cannot be found.
* Added a new function "mca_base_param_recache_files" the re-reads the file
configurations. This is used internally to help bootstrap the MCA system.
* Added a new orterun/mpirun command line option '-am' that aliases for the
mca_base_param_file_prefix MCA parameter
* Exposed the opal_path_access function as it is generally useful in other
places in the code.
* New function "opal_cmd_line_make_opt_mca" which will allow you to append a
new command line option with MCA parameter identifiers to set at the same
time. Previously this could only be done at command line declaration time.
* Added a new directory under the $pkgdatadir named "amca-param-sets" where all
the 'shipped with' Open MPI AMCA parameter sets are placed. This is the first
place to search for AMCA sets with relative paths.
* An example.conf AMCA parameter set file is located in
contrib/amca-param-sets/.
* Jeff Squyres contributed an OpenIB AMCA set for benchmarking.
Note: You will need to autogen with this commit as it adds a configure param.
Sorry :(
This commit was SVN r13867.
then we modify the argv, forcing the reallocation of the array. With luck
the saved pointer still have a meaning ... without execve return with error
14 (EFAULT).
This commit was SVN r13321.
The following SVN revision numbers were found above:
r12059 --> open-mpi/ompi@ae79894bad
1. add a "cancel_operation" API to the pls components that allows orterun to demand that an orted operation (e.g., terminate_job) be immediately cancelled and abandoned.
2. changes the pls orted commands from blocking to non-blocking. This allows us to interrupt those operations should an orted be non-responsive. The change also adds an orte_abort_timeout that limits how long orterun will automatically wait for the orteds to respond - if the terminate command, for example, doesn't see orted response within that time, then we printout an appropriate error message and just give up.
3. modifies orterun to allow multiple ctrl-c's to simply abort the program even if the orteds have not responded
4. does some cleanup on the orte-level mca params so that their implementation looks a lot more like that of ompi - makes it easier to maintain. This change also includes the definition of an orte_abort_timeout struct and associated MCA param (can't have too many!) so you can set the time after which orterun gives up on waiting for orteds to respond
This needs more testing before migrating to 1.2.
This commit was SVN r13304.
function prototype lives. Without this, we get compile
warnings. In addition, for 64-bit Solaris, we get a
segmentation fault from orterun without this include.
This commit was SVN r13065.
Modify the RMAPS framework so we eliminate communicating a map to a backend node when certain attributes are set. The proxy functions are now implemented in the base, and a check made for HNP/non-HNP operation made in the map_jobs function prior to execution.
This commit was SVN r12619.
Note that Bproc won't support this operation, so we just ignore the --reuse-daemons directive.
I'm afraid I don't understand the POE and XGrid environments well enough to attempt the necessary modifications.
Also, please note that XGrid support has been broken on the trunk. I don't understand the code syntax well enough to make the required changes to that PLS component, so it won't compile at the moment. I'm hoping Brian has a few minutes to fix it after SC.
This commit was SVN r12614.
1. new functionality in the pls base to check for reusable daemons and launch upon them
2. an extension of the odls API to allow each odls component to build a notify message with the "correct" data in it for adding processes to the local daemon. This means that the odls now opens components on the HNP as well as on daemons - but that's the price of allowing so much flexibility. Only the default odls has this functionality enabled - the others just return NOT_IMPLEMENTED
3. addition of a new command line option "--reuse-daemons" to orterun. The default, for now, is to NOT reuse daemons. Once we have more time to test this capability, we may choose to reverse the default. For one thing, we probably want to investigate the tradeoffs in start time for comm_spawn'd processes that reuse daemons versus launch their own. On some systems, though, having another daemon show up can cause problems - so they may want to set the default as "reuse".
This is ONLY enabled for rsh launch, at the moment. The code needing to be added to each launcher is about three lines long, so I'll be doing that as I get access to machines I can test it on.
This commit was SVN r12608.
Accordingly, there are new APIs to the name service to support the ability to get a job's parent, root, immediate children, and all its descendants. In addition, the terminate_job, terminate_orted, and signal_job APIs for the PLS have been modified to accept attributes that define the extent of their actions. For example, doing a "terminate_job" with an attribute of ORTE_NS_INCLUDE_DESCENDANTS will terminate the given jobid AND all jobs that descended from it.
I have tested this capability on a MacBook under rsh, Odin under SLURM, and LANL's Flash (bproc). It worked successfully on non-MPI jobs (both simple and including a spawn), and MPI jobs (again, both simple and with a spawn).
This commit was SVN r12597.
check for bourne shell, because bourne shell is the smallest
common divisor for bash/ksh/sh.
- Make some shell expressions sh compatible
This commit was SVN r12509.
If you want to look at our launch and MPI process startup times, you can do so with two MCA params:
OMPI_MCA_orte_timing: set it to anything non-zero and you will get the launch time for different steps in the job launch procedure. The degree of detail depends on the launch environment. rsh will provide you with the average, min, and max launch time for the daemons. SLURM block launches the daemon, so you only get the time to launch the daemons and the total time to launch the job. Ditto for bproc. TM looks more like rsh. Only those four environments are currently supported - anyone interested in extending this capability to other environs is welcome to do so. In all cases, you also get the time to setup the job for launch.
OMPI_MCA_ompi_timing: set it to anything non-zero and you will get the time for mpi_init to reach the compound registry command, the time to execute that command, the time to go from our stage1 barrier to the stage2 barrier, and the time to go from the stage2 barrier to the end of mpi_init. This will be output for each process, so you'll have to compile any statistics on your own. Note: if someone develops a nice parser to do so, it would be really appreciated if you could/would share!
This commit was SVN r12302.
This patch will cause a problem for cnos, however, as there we want to specifically tell the backends to be "null". I'm working on that issue.
This commit was SVN r12225.
I have tested on rsh, slurm, bproc, and tm. Bproc continues to have a problem (will be asking for help there).
Gridengine compiles but I cannot test (believe it likely will run).
Poe and xgrid compile to the extent they can without the proper include files.
This commit was SVN r12059.
set to 1 or 0 instead of the user defined number or default (128).
This caused the PLS to deadlock when using '--debug-daemons' with
more than 2 processes. :(
svn blame says that it was broken in r11347
It is *not* a problem on v1.1 or v1.2 branches.
Bug spotted by Tim Mattox and myself.
This commit was SVN r11575.
The following SVN revision numbers were found above:
r11347 --> open-mpi/ompi@f52c10d18e
- Remove extra NULL argument from rsh module.
This commit was SVN r11377.
The following SVN revision numbers were found above:
r11347 --> open-mpi/ompi@f52c10d18e
- use the OPAL functions for PATH and environment variables
- make all headers C++ friendly
- no unamed structures
- no implicit cast.
Plus a full implementation for the orte_wait functions.
This commit was SVN r11347.
Other changes:
1. Remove the old xcpu components as they are not functional.
2. Fix a "bug" in orterun whereby we called dump_aborted_procs even when we normally terminated. There is still some kind of bug in this procedure, however, as we appear to be calling the orterun job_state_callback function every time a process terminates (instead of only once when they have all terminated). I'll continue digging into that one.
This will require an autogen/configure, I'm afraid.
This commit was SVN r11228.
Clean up the remainder of the size_t references in the runtime itself. Convert to orte_std_cntr_t wherever it makes sense (only avoid those places where the actual memory size is referenced).
Remove the obsolete oob barrier function (we actually obsoleted it a long time ago - just never bothered to clean it up).
I have done my best to go through all the components and catch everything, even if I couldn't test compile them since I wasn't on that type of system. Still, I cannot guarantee that problems won't show up when you test this on specific systems. Usually, these will just show as "warning: comparison between signed and unsigned" notes which are easily fixed (just change a size_t to orte_std_cntr_t).
In some places, people didn't use size_t, but instead used some other variant (e.g., I found several places with uint32_t). I tried to catch all of them, but...
Once we get all the instances caught and fixed, this should once and for all resolve many of the heterogeneity problems.
This commit was SVN r11204.
1. Changed the RMGR and PLS APIs to add "signal_job" and "signal_proc" entry points. Only the "signal_job" entries are implemented - none of the components have implementations for "signal_proc" at this time. Thus, you can signal all of the procs in a job, but cannot currently signal only one specific proc.
2. Implemented those new API functions in all components except xgrid (Brian will do so very soon). Only the rsh/ssh and fork modules have been tested, however, and only under OS-X.
3. Added signal traps and callback functions for SIGUSR1/2 to orterun/mpirun that catch those signals and call the appropriate commands to propagate them out to all processes in the job.
4. Added a new test directory under the orte branch to (eventually) hold unit and system level tests for just the run-time. Since our test branch of the repository is under restricted access, people working on the RTE were continually developing their own system-level tests - thus making it hard to help diagnose problems. I have moved the more commonly-used functions here, and added one specifically for testing the SIGUSR1/2 functionality.
I will be contacting people directly to seek help with testing the changes on more environments. Other than compile issues, you should see absolutely no change in behavior on any of your systems - this additional functionality is transparent to anyone who does not issue a SIGUSR1/2 to mpirun.
Ralph
This commit was SVN r10258.
of $libdir and $bindir (i.e., was correctly doing local launches, but
was still using $prefix/lib and $prefix/bin for remote launches).
[Re-]Fixes OFED bug 59.
This commit was SVN r10207.
The following SVN revision numbers were found above:
r9930 --> open-mpi/ompi@1d6902296c
option as discussed on the devel-core mailing list. The Big
Difference is that instead of hard-coding the strings "/lib" and
"/bin" in to append to the prefix, we append the basename of the local
libdir and bindir. Hence, if your libdir is $prefix/lib64, we'll
append /lib64 to construct the remote node's LD_LIBRARY_PATH (etc.).
Also appended the orterun.1 man page to include a description of
--prefix, how it is constructed, what it handles / what it does not,
etc.
This commit was SVN r9930.
installation directories) in configure, the files that depend on this
information are not properly rebuilt. If you need this information,
don't setup a -D in the Makefile.am - instead, include
opal/install_dirs.h.
* Use the : option in AC_CONFIG_FILES to avoid needing to expose that
we are playing around with temporary files with our headers to avoid
rebuilding
* Clean up the version file information a bit, and like the install
directory stuff, make sure that there is a dependency so that
ompi_info gets rebuilt properly when a version number changes.
This commit was SVN r9256.
- move files out of toplevel include/ and etc/, moving it into the
sub-projects
- rather than including config headers with <project>/include,
have them as <project>
- require all headers to be included with a project prefix, with
the exception of the config headers ({opal,orte,ompi}_config.h
mpi.h, and mpif.h)
This commit was SVN r8985.
