No need for it to be in the base (we mistakenly thought it was used in
multiple shmem components).
This commit was SVN r25662.
The following SVN revision numbers were found above:
r25652 --> open-mpi/ompi@7e223b5799
* Fixes trac:2329 : Improves the error message, and ensures opal-restart will not segv in opal_finalize.
This commit was SVN r25586.
The following Trac tickets were found above:
Ticket 2329 --> https://svn.open-mpi.org/trac/ompi/ticket/2329
to -I the opal/config directory so that autoregen can find our .m4
files.
This commit was SVN r25564.
The following SVN revision numbers were found above:
r25511 --> open-mpi/ompi@5751c45916
supposed to. I.e., half-baked/not complete stuff.
This commit backs out all of r25545. Sorry folks!
This commit was SVN r25546.
The following SVN revision numbers were found above:
r25545 --> open-mpi/ompi@7f9ae11faf
to make MPI_IN_PLACE (and other sentinel Fortran constants) work on OS
X, we need to use the following compiler (linker) flag:
-Wl,-commons,use_dylibs
So if we're compiling on OS X, test to see if that flag works with the
compiler. If so, add it to the wrapper FFLAGS and FCFLAGS (note that
per a future update, we'll only have one Fortran compiler anyway).
Fixes trac:1982.
This commit was SVN r25545.
The following Trac tickets were found above:
Ticket 1982 --> https://svn.open-mpi.org/trac/ompi/ticket/1982
https://svn.open-mpi.org/trac/ompi/wiki/ProcessPlacement
The wiki page is incomplete at the moment, but I hope to complete it over the next few days. I will provide updates on the devel list. As the wiki page states, the default and most commonly used options remain unchanged (except as noted below). New, esoteric and complex options have been added, but unless you are a true masochist, you are unlikely to use many of them beyond perhaps an initial curiosity-motivated experimentation.
In a nutshell, this commit revamps the map/rank/bind procedure to take into account topology info on the compute nodes. I have, for the most part, preserved the default behaviors, with three notable exceptions:
1. I have at long last bowed my head in submission to the system admin's of managed clusters. For years, they have complained about our default of allowing users to oversubscribe nodes - i.e., to run more processes on a node than allocated slots. Accordingly, I have modified the default behavior: if you are running off of hostfile/dash-host allocated nodes, then the default is to allow oversubscription. If you are running off of RM-allocated nodes, then the default is to NOT allow oversubscription. Flags to override these behaviors are provided, so this only affects the default behavior.
2. both cpus/rank and stride have been removed. The latter was demanded by those who didn't understand the purpose behind it - and I agreed as the users who requested it are no longer using it. The former was removed temporarily pending implementation.
3. vm launch is now the sole method for starting OMPI. It was just too darned hard to maintain multiple launch procedures - maybe someday, provided someone can demonstrate a reason to do so.
As Jeff stated, it is impossible to fully test a change of this size. I have tested it on Linux and Mac, covering all the default and simple options, singletons, and comm_spawn. That said, I'm sure others will find problems, so I'll be watching MTT results until this stabilizes.
This commit was SVN r25476.
http://www.open-mpi.org/community/lists/devel/2011/10/9878.php
I am making a final decision to decide the behavior of what happens
when an MCA parameter is re-registered and changes types. In
developer builds (i.e., OPAL_ENABLE_DEBUG==1), a show_help message
will be displayed. In all builds, an error status will be returned.
Specifically, the logic looks like this:
{{{
if (detect_re-registration_with_type_change) {
#if OPAL_ENABLE_DEBUG
opal_show_help(...);
#endif
return OPAL_ERR_VALUE_OUT_OF_BOUNDS;
}
}}}
If someone would like to change this behavior, they are welcome to do
so. :-) I am committing this so that ''some'' action occurs (rather
than talking about the issue and then nothing happens).
This commit was SVN r25432.
handled properly when MCA parameters are re-registered and their types
change. Specifically, this case was broken:
1. Register an int MCA param with a non-zero default value
1. Re-register the same MCA param as a string with a NULL default value
The 2nd step would cause a segv because the first int default value
wasn't being reset properly. Here's sample code that shows the issue:
{{{
{
int ibogus;
char *sbogus;
opal_init(&argc, &argv);
mca_base_param_reg_int_name("type", "name", "help", false, false, 3, &ibogus);
printf("Ibogus: %d\n", ibogus);
mca_base_param_reg_string_name("type", "name", "help", false, false, NULL, &sbogus);
printf("Sbogus: %s\n", (NULL == sbogus) ? "NULL" : sbogus);
exit(0);
}
}}}
This commit fixes the problem from the sample code above as well as
the a similar issue for file-set MCA params and override values. It
also resets default values for MCA params initially registered as a
string but then re-registered as an int.
This commit was SVN r25392.
Use hwloc to obtain the cpuset for each process during mpi_init, and share that info in the modex. As it arrives, use a new opal_hwloc_base utility function to parse the value against the local proc's cpuset and determine where they overlap. Cache the value in the pmap object as it may be referenced multiple times.
Thus, the return value from orte_ess.proc_get_locality is a 16-bit bitmask that describes the resources being shared with you. This bitmask can be tested using the macros in opal/mca/paffinity/paffinity.h
Locality is available for all procs, whether launched via mpirun or directly with an external launcher such as slurm or aprun.
This commit was SVN r25331.
calling main():
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
xxx:~/openmpi-1.5.4/COMPILE-intel-12.1.0> which ompi_info
~/openmpi-1.5.4/COMPILE-intel-12.1.0/usr/bin/ompi_info
xxx:~/openmpi-1.5.4/COMPILE-intel-12.1.0> ompi_info
Segmentation fault
xxx:~/openmpi-1.5.4/COMPILE-intel-12.1.0> gdb usr/bin/ompi_info
...
(gdb) run
Starting program:
...
Program received signal SIGSEGV, Segmentation fault.
opal_memory_ptmalloc2_int_malloc (av=0x7ffff7fe83d8, bytes=4102) at
../../../../../opal/mca/memory/linux/malloc.c:4080
4080 /* remove from unsorted list */
(gdb) where
#0 opal_memory_ptmalloc2_int_malloc (av=0x7ffff7fe83d8, bytes=4102) at
../../../../../opal/mca/memory/linux/malloc.c:4080
#1 0x00007ffff7c232b9 in opal_memory_linux_malloc_hook
(sz=140737354040280, caller=0x1006) at
../../../../../opal/mca/memory/linux/hooks.c:687
#2 0x0000003dd96a6871 in __alloc_dir () from /lib64/libc.so.6
#3 0x0000003ddfa053cd in ?? () from /usr/lib64/libnuma.so.1
#4 0x0000003dd8e0e445 in _dl_init_internal () from /lib64/ld-linux-x86-64.so.2
...
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
A lot of combinations and trials have been done, yet to no avail.
Intel v11.0 worked...
Thanks to Hubert Haberstock (Intel) providing the hint in:
http://software.intel.com/en-us/forums/showthread.php?t=87132
This was tested on openmpi-1.5.4 and therefore should
cmr:v1.5
This commit was SVN r25290.
match similar stuff in the event framework; only add CPPFLAGS /
LDFLAGS / LIBS / and WRAPPER_EXTRA_* of the same for the one, single,
winning component (because this framework is compile-time,
one-of-many).
This commit was SVN r25199.
only became evident when there was more than one event component.
The libevent2013 component is still ompi_ignore'd for most developers.
This commit was SVN r25198.
Since hwloc has a dynamic bitmap size, it could actually have bits set
that will not fit in the paffinity mask. We already made sure that we
didn't overrun the paffinity mask; now also set the return value to
OPAL_ERR_VALUE_OUT_OF_BOUNDS (wow, we really thought of everything
with those error codes, eh?) if the hwloc bitmap has bits set higher
than what will fit into the paffinity bitmask.
This commit was SVN r25179.
The following Trac tickets were found above:
Ticket 2854 --> https://svn.open-mpi.org/trac/ompi/ticket/2854
* change components from setting <framework>_base_include to
opal_<framework>_<component>_include; the framework m4 will figure
out the winning component and pick the right "include" shell
variable. Ditto for the other shell variables (cppflags, ldflags,
etc.).
* misc fixes to hwloc/external
* add a bunch of missing "opal_" prefixes to shell variables
* add a few more / update a few comments in framework m4's
This commit was SVN r25174.
maffinity_base_bind_failure_action MCA params to the hwloc base
(hwloc_base_alloc_polocy and hwloc_base_bind_failure_action). Since
these MCA parameters were never on a release branch, I'm just
moving/renaming them outright and not leaving aliases to the old
names.
Note that some upper layer needs to call
opal_hwloc_base_set_process_membind_policy() to set the
set-by-MCA-param process-wide memory affinity policy. We can't do
this automatically during hwloc_base_open() because, for reasons
described elsewhere, opal_hwloc_topology is not automatically filled
during hwloc_base_open() (in short: potential scalability issues when
launching many MPI processes simultaneously on a single machine, for
example).
This commit was SVN r25156.
paffinity/hwloc components were still calling hwloc_topology_init/load
themselves, and not using the opal_hwloc_topology. Doh!
This commit fixes that -- these 2 components no longer have their own
copy of the topology tree; they just use opal_hwloc_topology.
This commit was SVN r25151.
the command line, hwloc is just like any other external dependency
in OMPI: if we find it, we'll use it. If we don't find it, we'll
ignore it. See comments in opal/mca/hwloc/configure.m4 for an
explanation.
* Fix some copy-n-paste errors in opal/mca/hwloc/configure.m4
w.r.t. flags coming in from the winning component.
* Add another line in ompi_info's output about whether hwloc support
is included or not.
This commit was SVN r25134.
specify btl_tcp_if_include because btl_tcp_if_exclude is defaulted to
the loopback devices.
This commit does a few things:
* Introduce a new OPAL MCA base function:
mca_base_param_check_exclusive_string(). It checks to see that the
''user'' does not set two MCA parameters that are mutually
exclusive by checking the source of those MCS param values.
* Use the above function in many BTLs (and the OOB TCP) to ensure
that <foo>_if_include and <foo>_if_exclude are not both specified
''by the user''.
* Re-arrange many of these BTLs to move their MCA registration code
into a separate component_register() function (vs. the
component_open() function).
This code has been nominally reviewed and checked by Ralph, George,
Terry, and Shiqing.
This commit was SVN r25043.
The following SVN revision numbers were found above:
r24976 --> open-mpi/ompi@8f4ac54336
