orte_session_dir_finalize doesn't clean the right directories.
orte_session_dir_cleanup neither.
This patch fixes several issues:
1. orte_session_dir_cleanup():
1. when jobid is not a wildcard, jobid is used to build the job
session dir (instead of ORTE_LOCAL_JOBID).
1. ORTE_SUCCESS is unconditionally returned (instead of rc that
might have been previously set to another value).
1. orte_session_dir_finalize():
1. convert_jobid_to_string is not the right call to get the job
session dir.
1. in some places orte_process_info.top_session_dir is directly
used, without being prefixed with the base directory.
Factorized the code sections that build the job_session_dir into a
single orte_build_job_session_dir() function that is now called by
both orte_session_dir_finalize() and orte_session_dir_cleanup().
Signed-off-by: Nadia Derbey <Nadia.Derbey@bull.net>
This commit was SVN r21498.
Emit a more informative error message when the file descriptor limit is
reached during an accept() call. Also, abort when the accept fails to
avoid an infinite loop.
Emit a more informative error message when the help file can't be opened.
This commit was SVN r21271.
The following Trac tickets were found above:
Ticket 1930 --> https://svn.open-mpi.org/trac/ompi/ticket/1930
Add a new tm ess module that exploits this capability.
Update the various plm modules to enable it - just a minor change reflecting an added param to a plm base function.
Additional fixes included:
1. remove an erroneous cleanup of session directories in the tool finalize procedure - tools don't create session directories to begin with!
2. fix a duplicate free when attempting to execute a non-existent app
3. cleanup an typo in the comm utilities
4. fix comm_spawn - was perturbed by the changes in pack/unpack of orte_job_t to properly support orte-ps
Been tested on slurm and tm machines, using all tests in orte/test/mpi. May run into issue with command line length on large jobs due to inclusion of node info to support static ports - will fix this next with addition of regexp generator to compress that info.
This commit was SVN r21248.
This causes the orteds in the routing tree to remain alive until all termination "acks" from orteds below them have passed through. Thus, if we use static ports, we no longer require a direct orted-to-mpirun connection.
Also modify the binomial routed module so it conforms to what all the other routed modules do and have all messages pass along the routing tree instead of short-circuiting between orteds. This further reduces the number of ports being opened on backend nodes.
This commit was SVN r21203.
OMPI_* to OPAL_*. This allows opal layer to be used more independent
from the whole of ompi.
NOTE: 9 "svn mv" operations immediately follow this commit.
This commit was SVN r21180.
- Delete unnecessary header files using
contrib/check_unnecessary_headers.sh after applying
patches, that include headers, being "lost" due to
inclusion in one of the now deleted headers...
In total 817 files are touched.
In ompi/mpi/c/ header files are moved up into the actual c-file,
where necessary (these are the only additional #include),
otherwise it is only deletions of #include (apart from the above
additions required due to notifier...)
- To get different MCAs (OpenIB, TM, ALPS), an earlier version was
successfully compiled (yesterday) on:
Linux locally using intel-11, gcc-4.3.2 and gcc-SVN + warnings enabled
Smoky cluster (x86-64 running Linux) using PGI-8.0.2 + warnings enabled
Lens cluster (x86-64 running Linux) using Pathscale-3.2 + warnings enabled
This commit was SVN r21096.
several header files (previously included by header-files)
now have to be moved "upward".
This is mainly system headers such as string.h, stdio.h and for
networking, but also some orte headers.
This commit was SVN r21095.
We currently apply all of the MCA params in the parent job to the child. This commit allows a user to specify additional params for the child job, and to override any pre-existing params with the new value so they can better control behavior of the child job.
This commit was SVN r20989.
generate mangled windex files. Made ompi-top.1 and ompi-iof.1 build
by default. Also, added the orte-top synonym to the ompi-top manpage.
This commit was SVN r20915.
In case we use memcmp, strlen, strup and friends include <string.h>
Also several constants.h are not included directly
- Let's have mca_topo_base_cart_create return ompi-errors in
ompi/mca/topo/base/topo_base_cart_create.c
This commit was SVN r20773.
Adapt orte_process_info to orte_proc_info, and
change orte_proc_info() to orte_proc_info_init().
- Compiled on linux-x86-64
- Discussed with Ralph
This commit was SVN r20739.
Correct an error wrt how jobids were being computed. Needed to ensure that the job family field was not overrun as we increment jobids for comm_spawn.
Update the slurm plm module so it uses the new slurm termination procedure (brings trunk back into alignment with 1.3 branch).
Update the slurmd ess component so it doesn't get selected if we are running a singleton inside of a slurm allocation.
Cleanup HNP init by moving some code that had been in orte_globals.c for historical reasons into the ess hnp module, and removing the call to that code from the ess_base_std_prolog
NOTE: this change allows orte to support an infinite aggregate number of comm_spawn's, with up to 64k being alive at any one instant. HOWEVER, the MPI layer currently does -not- support re-use of jobids. I did some prototype coding to revise the ompi_proc_t structures, but the BTLs are caching their own data, and there was no readily apparent way to update it. Thus, attempts to spawn more than the 64k limit will abort to avoid causing the MPI layer to hang.
This commit was SVN r20700.
Only proc_info.h-internal include file is opal/dss/dss_types.h
- In one case (orte/util/hnp_contact.c) had to add proc_info.h again.
- Local compilation (Linux/x86_64) w/ -Wimplicit-function-declaration
works fine, no errors.
Again, let's have MTT the last word.
This commit was SVN r20631.
Often, orte/util/show_help.h is included, although no functionality
is required -- instead, most often opal_output.h, or
orte/mca/rml/rml_types.h
Please see orte_show_help_replacement.sh commited next.
- Local compilation (Linux/x86_64) w/ -Wimplicit-function-declaration
actually showed two *missing* #include "orte/util/show_help.h"
in orte/mca/odls/base/odls_base_default_fns.c and
in orte/tools/orte-top/orte-top.c
Manually added these.
Let's have MTT the last word.
This commit was SVN r20557.
Correct the orte-show-help file when a rank is out of bounds, and do that test where a wildcard doesn't get incorrectly flagged as out-of-bounds.
This commit was SVN r20398.
1. fix a race condition whereby a proc's output could trigger an event prior to the other outputs being setup, thus c ausing the IOF to declare the proc "terminated" too early. This was really rare, but could happen.
2. add a new "timestamp-output" option that timestamp's each line of output
3. add a new "output-filename" option that redirects each proc's output to a separate rank-named file.
4. add a new "xterm" option that redirects the output of the specified ranks to a separate xterm window.
This commit was SVN r20392.
y combination of comma-separated values and ranges. Daemons will use the first port in the range, MPI procs will use the other ports in the range assuming that they know their node rank in time and enough ports were specified.
NOTE: this capability only works under specific conditions. I will outline more about this in a note to devel as the remainder of the implementation progresses. For now, the only environment where this works is slurm. The linear routed module has also been adjusted to work with static ports so that all messaging flows strictly through the topology, including the initial daemon callback - thus limiting the number of sockets opened by mpirun.
This commit was SVN r20390.
Consolidate the nid/pid lookup code with the rest of the nid/pid code so that changes are easier to track. Add the ability to send cluster profile info as part of the nidmap. Cleanup the setup and teardown of the new global nidmap and pidmap objects.
This commit was SVN r20219.
corrections to non-windows files (but within ifdef __WINDOWS__)
type casts, event library for windows use win32.
in orte runtime, add windows sockets handling and object construction.
This commit was SVN r20110.
Enable one mpirun to act as the server for another mpirun when doing MPI_Publish_name and its associated operations. The user is responsible, of course, for ensuring that the mpirun acting as a server outlives any mpiruns using it in that capacity.
Add a cmd line option to mpirun --report-pid that prints out mpirun's pid. Allow the --ompi-server option to now take pid:# (or PID:#) of the mpirun to be used as the server, and then look that pid up by searching the local mpirun contact infos for it.
This commit was SVN r20102.
1. after we get enough jobs in the pidmap, the address of the jobmap pointer array data can move due to realloc. Need to reset the jobs pointer each time through to ensure it is pointing to valid data
2. when we exit the loop, rc will be set to an error due to reading past end of buffer - need to reset so it is ignored
3. need to ensure we only try to read one jobid each time through loop
This commit was SVN r20030.
This commit does that by ensuring that daemons retain knowledge of proc location for all procs in their job family. It required a minor change to the ESS API to allow the daemons to update their pidmaps as data was received. In addition, the routed modules have been updated to take advantage of the newly available info, and the encode/decode pidmap utilities have been updated to communicate the required info in the launch message.
This commit was SVN r20022.
1. remove direct routed module (hooray!)
2. add radix tree routed module (binomial remains default)
3. remove duplicate data storage - orteds were storing nidmap and pidmap data in odls, everyone else in ess
4. add ess APIs to update nidmap, add new pidmap - used only by orteds for MPI-2 support
5. modify code to eliminate multiple calls to orte_routed.update_route that recreated info already in ess pidmap. Add ess API to lookup that info instead. Modify routed modules to utilize that capability
6. setup new ability to shutdown orteds without sending back an "ack" message to mpirun - not utilized yet, will require some changes to plm terminate_orteds functions in managed environments (coming soon)
Initial tests indicating that fully routing comm via defined routing trees may not actually have a significant cost for operations like IB QP setup. More tests required to confirm.
This will require an autogen...
This commit was SVN r19866.
1. completely and cleanly separates responsibilities between the HNP, orted, and tool components.
2. removes all wireup messaging during launch and shutdown.
3. maintains flow control for stdin to avoid large-scale consumption of memory by orteds when large input files are forwarded. This is done using an xon/xoff protocol.
4. enables specification of stdin recipients on the mpirun cmd line. Allowed options include rank, "all", or "none". Default is rank 0.
5. creates a new MPI_Info key "ompi_stdin_target" that supports the above options for child jobs. Default is "none".
6. adds a new tool "orte-iof" that can connect to a running mpirun and display the output. Cmd line options allow selection of any combination of stdout, stderr, and stddiag. Default is stdout.
7. adds a new mpirun and orte-iof cmd line option "tag-output" that will tag each line of output with process name and stream ident. For example, "[1,0]<stdout>this is output"
This is not intended for the 1.3 release as it is a major change requiring considerable soak time.
This commit was SVN r19767.
Relative node syntax remains supported. Also, if you specify empty nodes, but have a specific empty node called out later, we will not include that node in the empties we add. I'll provide examples in the manpage.
This commit was SVN r19402.
man page file that was missed in the inital pass.
We are using $(am_dirstamp) instead of creating our own dirstamp since there
is src code in util/hostfile directory is created. The automake process
creates the $(am_dirstamp), we found the use of this in the generated Makefile
in the util/Makefile
This commit was SVN r19230.
Mpirun - and the orteds - were doing their best to whack all session dirs on their nodes just in case there was something lingering due to an abnormal termination. Unfortunately, they were -too- good at it. They were whacking all session directories under the user's name, even those from other mpiruns!
This adds another layer to the session dir tree so that we can denote which jobs come from our own job family, and restricts the cleanup operation to only session dirs from within our own job family. So we'll still cleanup anything due to our own mpirun, but won't whack any other mpirun from this user.
Call it being polite...
This commit was SVN r19083.
1. repair of the linear and direct routed modules
2. repair of the ompi/pubsub/orte module to correctly init routes to the ompi-server, and correctly handle failure to correctly parse the provided ompi-server URI
3. modification of orterun to accept both "file" and "FILE" for designating where the ompi-server URI is to be found - purely a convenience feature
4. resolution of a message ordering problem during the connect/accept handshake that allowed the "send-first" proc to attempt to send to the "recv-first" proc before the HNP had actually updated its routes.
Let this be a further reminder to all - message ordering is NOT guaranteed in the OOB
5. Repair the ompi/dpm/orte module to correctly init routes during connect/accept.
Reminder to all: messages sent to procs in another job family (i.e., started by a different mpirun) are ALWAYS routed through the respective HNPs. As per the comments in orte/routed, this is REQUIRED to maintain connect/accept (where only the root proc on each side is capable of init'ing the routes), allow communication between mpirun's using different routing modules, and to minimize connections on tools such as ompi-server. It is all taken care of "under the covers" by the OOB to ensure that a route back to the sender is maintained, even when the different mpirun's are using different routed modules.
6. corrections in the orte/odls to ensure proper identification of daemons participating in a dynamic launch
7. corrections in build/nidmap to support update of an existing nidmap during dynamic launch
8. corrected implementation of the update_arch function in the ESS, along with consolidation of a number of ESS operations into base functions for easier maintenance. The ability to support info from multiple jobs was added, although we don't currently do so - this will come later to support further fault recovery strategies
9. minor updates to several functions to remove unnecessary and/or no longer used variables and envar's, add some debugging output, etc.
10. addition of a new macro ORTE_PROC_IS_DAEMON that resolves to true if the provided proc is a daemon
There is still more cleanup to be done for efficiency, but this at least works.
Tested on single-node Mac, multi-node SLURM via odin. Tests included connect/accept, publish/lookup/unpublish, comm_spawn, comm_spawn_multiple, and singleton comm_spawn.
Fixes ticket #1256
This commit was SVN r18804.
Add ability for sys admins to prohibit putting session directories under specified locations. Thus, they can now protect parallel file systems from foolish user mistakes.
This commit was SVN r18721.
Some minor changes to help facilitate debugger support so that both mpirun and yod can operate with it. Still to be completed.
This commit was SVN r18664.
This commit repairs the debugger initialization procedure. I am not closing the ticket, however, pending Jeff's review of how it interfaces to the ompi_debugger code he implemented. There were duplicate symbols being created in that code, but not used anywhere. I replaced them with the ORTE-created symbols instead. However, since they aren't used anywhere, I have no way of checking to ensure I didn't break something.
So the ticket can be checked by Jeff when he returns from vacation... :-)
This commit was SVN r18625.
The following Trac tickets were found above:
Ticket 1255 --> https://svn.open-mpi.org/trac/ompi/ticket/1255
After much work by Jeff and myself, and quite a lot of discussion, it has become clear that we simply cannot resolve the infinite loops caused by RML-involved subsystems calling orte_output. The original rationale for the change to orte_output has also been reduced by shifting the output of XML-formatted vs human readable messages to an alternative approach.
I have globally replaced the orte_output/ORTE_OUTPUT calls in the code base, as well as the corresponding .h file name. I have test compiled and run this on the various environments within my reach, so hopefully this will prove minimally disruptive.
This commit was SVN r18619.
By consolidating them all into one function, ompi_info can call that function and register the desired variables. This also requires, however, that ompi_info call orte_output_init to avoid generating tons of error messages, so make that adjustment too.
Fixes ticket #1314
In addition, orte_output has a race condition issue whereby calls to orte_output/verbose can occur prior to either the RML being defined/setup, or the HNP being defined. This latter occurs during the initialization of the orte_process_info structure. In both cases, there is no way orte_output can send the output to the HNP. Hence, the message must be simply output locally.
Fixes ticket #1315
This commit was SVN r18524.
It is still possible that someone can call an orte_output function during orte_finalize - this is not an error. Prior commits ensured that this is correctly handled. This commit only deals with improper calls prior to calling orte_init.
This commit was SVN r18513.
system, we don't try to use it (e.g., if orte_output or orte_show_help
is called before orte_init).
This commit was SVN r18442.
The following Trac tickets were found above:
Ticket 1289 --> https://svn.open-mpi.org/trac/ompi/ticket/1289
such, the commit message back to the master SVN repository is fairly
long.
= ORTE Job-Level Output Messages =
Add two new interfaces that should be used for all new code throughout
the ORTE and OMPI layers (we already make the search-and-replace on
the existing ORTE / OMPI layers):
* orte_output(): (and corresponding friends ORTE_OUTPUT,
orte_output_verbose, etc.) This function sends the output directly
to the HNP for processing as part of a job-specific output
channel. It supports all the same outputs as opal_output()
(syslog, file, stdout, stderr), but for stdout/stderr, the output
is sent to the HNP for processing and output. More on this below.
* orte_show_help(): This function is a drop-in-replacement for
opal_show_help(), with two differences in functionality:
1. the rendered text help message output is sent to the HNP for
display (rather than outputting directly into the process' stderr
stream)
1. the HNP detects duplicate help messages and does not display them
(so that you don't see the same error message N times, once from
each of your N MPI processes); instead, it counts "new" instances
of the help message and displays a message every ~5 seconds when
there are new ones ("I got X new copies of the help message...")
opal_show_help and opal_output still exist, but they only output in
the current process. The intent for the new orte_* functions is that
they can apply job-level intelligence to the output. As such, we
recommend that all new ORTE and OMPI code use the new orte_*
functions, not thei opal_* functions.
=== New code ===
For ORTE and OMPI programmers, here's what you need to do differently
in new code:
* Do not include opal/util/show_help.h or opal/util/output.h.
Instead, include orte/util/output.h (this one header file has
declarations for both the orte_output() series of functions and
orte_show_help()).
* Effectively s/opal_output/orte_output/gi throughout your code.
Note that orte_output_open() takes a slightly different argument
list (as a way to pass data to the filtering stream -- see below),
so you if explicitly call opal_output_open(), you'll need to
slightly adapt to the new signature of orte_output_open().
* Literally s/opal_show_help/orte_show_help/. The function signature
is identical.
=== Notes ===
* orte_output'ing to stream 0 will do similar to what
opal_output'ing did, so leaving a hard-coded "0" as the first
argument is safe.
* For systems that do not use ORTE's RML or the HNP, the effect of
orte_output_* and orte_show_help will be identical to their opal
counterparts (the additional information passed to
orte_output_open() will be lost!). Indeed, the orte_* functions
simply become trivial wrappers to their opal_* counterparts. Note
that we have not tested this; the code is simple but it is quite
possible that we mucked something up.
= Filter Framework =
Messages sent view the new orte_* functions described above and
messages output via the IOF on the HNP will now optionally be passed
through a new "filter" framework before being output to
stdout/stderr. The "filter" OPAL MCA framework is intended to allow
preprocessing to messages before they are sent to their final
destinations. The first component that was written in the filter
framework was to create an XML stream, segregating all the messages
into different XML tags, etc. This will allow 3rd party tools to read
the stdout/stderr from the HNP and be able to know exactly what each
text message is (e.g., a help message, another OMPI infrastructure
message, stdout from the user process, stderr from the user process,
etc.).
Filtering is not active by default. Filter components must be
specifically requested, such as:
{{{
$ mpirun --mca filter xml ...
}}}
There can only be one filter component active.
= New MCA Parameters =
The new functionality described above introduces two new MCA
parameters:
* '''orte_base_help_aggregate''': Defaults to 1 (true), meaning that
help messages will be aggregated, as described above. If set to 0,
all help messages will be displayed, even if they are duplicates
(i.e., the original behavior).
* '''orte_base_show_output_recursions''': An MCA parameter to help
debug one of the known issues, described below. It is likely that
this MCA parameter will disappear before v1.3 final.
= Known Issues =
* The XML filter component is not complete. The current output from
this component is preliminary and not real XML. A bit more work
needs to be done to configure.m4 search for an appropriate XML
library/link it in/use it at run time.
* There are possible recursion loops in the orte_output() and
orte_show_help() functions -- e.g., if RML send calls orte_output()
or orte_show_help(). We have some ideas how to fix these, but
figured that it was ok to commit before feature freeze with known
issues. The code currently contains sub-optimal workarounds so
that this will not be a problem, but it would be good to actually
solve the problem rather than have hackish workarounds before v1.3 final.
This commit was SVN r18434.
Modify grpcomm xcast so it now uses the selected routed module - eliminates cross-wiring of xcast and routing paths. Suboptimal at the moment, but better implementation is on its way.
Cleanup ignore properties on the new routed components.
This commit was SVN r18377.
Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs.
Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node.
This commit was SVN r18338.
{{{
svn merge -r 18218:18240 https://svn.open-mpi.org/svn/ompi/tmp/jjh-scratch .
}}}
Contains:
* Primarily a fix for a user reported problem where a cached file descriptor is causing a SIGPIPE on restart.
* Cleanup some small memory leaks from using mca_base_param_env_var() - Thanks Jeff
* Cleanup ORTE FT tool compilation in non-FT builds - Thanks Tim P.
* Cleanup mpi interface with missplaced {{{OPAL_CR_ENTER_LIBRARY}}} - Thanks Terry
* Some other sundry cleanup items all dealing with C/R functionality in the trunk.
This commit was SVN r18241.
Restore the "do-not-launch" functionality so users can test a mapping without launching it.
Add a "do-not-resolve" cmd line flag to mpirun so the opal/util/if.c code does not attempt to resolve network addresses, thus enabling a user to test a hostfile mapping without hanging on network resolve requests.
Add a function to hostfile to generate an ordered list of host names from a hostfile
This commit was SVN r18190.
The bug was a race condition in the barrier operation that caused the barrier in MPI_Finalize to fail on very short programs.
Scalaiblity was improved by using the daemons to aggregate modex and barrier messages before sending them to the rank=0 proc. Improvement is proportional to ppn, of course, but there really wasn't a scaling problem at low ppn anyway. This modification also paves the way for better allgather operations since now all the data for each node is sitting at the daemon level, and the daemons are now aware that a collective operation on the OOB is underway (so they -can- participate in a collective of their own to support it).
Also added better diagnostics to map out the timing associated with MPI_Init - turned on by -mca orte_timing 1.
This commit was SVN r17988.
Specifically, add two new APIs:
1. lost_route: allows the OOB to report that a connection has failed, thereby giving the routed module an opportunity to respond appropriately to its topology. Creating the API also allows each routed component to hold its own definition of "lifeline" - in some cases, this may be a single connection, but in others it may be multiple connections. Some modules may choose to re-route messaging if the lifeline or any other connection is lost, while others may choose to abort the job.
Both the tree and unity modules retain the current behavior and abort the job if the lifeline connection is lost, while ignoring other lost connections.
2. get_wireup_info: returns (in a provided buffer) info required to wireup connections for the specified job. Some routed modules do not need to return any info as they can wireup via alternative means, while some need to xchg data with their peers. If info is inserted into the buffer, the plm_base_launch_apps function will xcast the contents to the specified job.
The commit also removes the "lifeline" entry from the orte_process_info struct (and the associated ORTE_PROC_MY_LIFELINE definition) as the lifeline info is now contained within the respective routed module.
This commit was SVN r17969.
Only one place used the user name field - session_dir, when formulating the name of the top-level directory. Accordingly, the code for getting the user's id has been moved to the session_dir code.
This commit was SVN r17926.
Fix race conditions in abnormal terminations. We had done a first-cut at this in a prior commit. However, the window remained partially open due to the fact that the HNP has multiple paths leading to orte_finalize. Most of our frameworks don't care if they are finalized more than once, but one of them does, which meant we segfaulted if orte_finalize got called more than once. Besides, we really shouldn't be doing that anyway.
So we now introduce a set of atomic locks that prevent us from multiply calling abort, attempting to call orte_finalize, etc. My initial tests indicate this is working cleanly, but since it is a race condition issue, more testing will have to be done before we know for sure that this problem has been licked.
Also, some updates relevant to the tool comm library snuck in here. Since those also touched the orted code (as did the prior changes), I didn't want to attempt to separate them out - besides, they are coming in soon anyway. More on them later as that functionality approaches completion.
This commit was SVN r17843.
This commit adds definition for a "lifeline" connection. For an HNP, there is no lifeline, so the lifeline proc is NULL. For a daemon, the lifeline is the HNP - the daemon should abort if it loses that connection.
For a proc using unity routed, the lifeline is the HNP since it connects directly to the HNP.
For a proc using tree routed, the lifeline is the local daemon.
Adjusted OOB to call abort if the lifeline (as opposed to HNP) connection is lost.
This commit was SVN r17761.
The change also:
- cleans up and simplifies the command line processing code
- adds an error output if more than one hostfile passed for a single app context
- gets rid of the superfluous orte_app_context_map_t type, and instead use a simple argv of -host options
This commit was SVN r17750.
The following Trac tickets were found above:
Ticket 1124 --> https://svn.open-mpi.org/trac/ompi/ticket/1124
Note that --path specifies extra directories where the executable
is searched for, but does not affect the PATH settings.
This commit fixes trac:1221.
This commit was SVN r17748.
The following Trac tickets were found above:
Ticket 1221 --> https://svn.open-mpi.org/trac/ompi/ticket/1221
1. taking advantage of the fact that we no longer create the launch message via a GPR trigger. In earlier times, we had the GPR create the launch message based on a subscription. In that mode of operation, we could not guarantee the order in which the data was stored in the message - hence, we had no choice but to parse the message in a loop that checked each value against a list of possible "keys" until the corresponding value was found.
Now, however, we construct the message "by hand", so we know precisely what data is in each location in the message. Thus, we no longer need to send the character string "keys" for each data value any more. This represents a rather large savings in the message size - to give you an example, we typically would use a 30-char "key" for a 2-byte data value. As you can see, the overhead can become very large.
2. sending node-specific data only once. Again, because we used to construct the message via subscriptions that were done on a per-proc basis, the data for each node (e.g., the daemon's name, whether or not the node was oversubscribed) would be included in the data for each proc. Thus, the node-specific data was repeated for every proc.
Now that we construct the message "by hand", there is no reason to do this any more. Instead, we can insert the data for a specific node only once, and then provide the per-proc data for that node. We therefore not only save all that extra data in the message, but we also only need to parse the per-node data once.
The savings become significant at scale. Here is a comparison between the revised trunk and the trunk prior to this commit (all data was taken on odin, using openib, 64 nodes, unity message routing, tested with application consisting of mpi_init/mpi_barrier/mpi_finalize, all execution times given in seconds, all launch message sizes in bytes):
Per-node scaling, taken at 1ppn:
#nodes original trunk revised trunk
time size time size
1 0.10 819 0.09 564
2 0.14 1070 0.14 677
3 0.15 1321 0.14 790
4 0.15 1572 0.15 903
8 0.17 2576 0.20 1355
16 0.25 4584 0.21 2259
32 0.28 8600 0.27 4067
64 0.50 16632 0.39 7683
Per-proc scaling, taken at 64 nodes
ppn original trunk revised trunk
time size time size
1 0.50 16669 0.40 7720
2 0.55 32733 0.54 11048
3 0.87 48797 0.81 14376
4 1.0 64861 0.85 17704
Condensing those numbers, it appears we gained:
per-node message size: 251 bytes/node -> 113 bytes/node
per-proc message size: 251 bytes/proc -> 52 bytes/proc
per-job message size: 568 bytes/job -> 399 bytes/job
(job-specific data such as jobid, override oversubscribe flag, total #procs in job, total slots allocated)
The fact that the two pre-commit trunk numbers are the same confirms the fact that each proc was containing the node data as well. It isn't quite the 10x message reduction I had hoped to get, but it is significant and gives much better scaling.
Note that the timing info was, as usual, pretty chaotic - the numbers cited here were typical across several runs taken after the initial one to avoid NFS file positioning influences.
Also note that this commit removes the orte_process_info.vpid_start field and the handful of places that passed that useless value. By definition, all jobs start at vpid=0, so all we were doing is passing "0" around. In fact, many places simply hardwired it to "0" anyway rather than deal with it.
This commit was SVN r16428.
The commit has been tested for C/R and Cray operations, and on Odin (SLURM, rsh) and RoadRunner (TM). I tried to update all environments, but obviously could not test them. I know that Windows needs some work, and have highlighted what is know to be needed in the odls process component.
This represents a lot of work by Brian, Tim P, Josh, and myself, with much advice from Jeff and others. For posterity, I have appended a copy of the email describing the work that was done:
As we have repeatedly noted, the modex operation in MPI_Init is the single greatest consumer of time during startup. To-date, we have executed that operation as an ORTE stage gate that held the process until a startup message containing all required modex (and OOB contact info - see #3 below) info could be sent to it. Each process would send its data to the HNP's registry, which assembled and sent the message when all processes had reported in.
In addition, ORTE had taken responsibility for monitoring process status as it progressed through a series of "stage gates". The process reported its status at each gate, and ORTE would then send a "release" message once all procs had reported in.
The incoming changes revamp these procedures in three ways:
1. eliminating the ORTE stage gate system and cleanly delineating responsibility between the OMPI and ORTE layers for MPI init/finalize. The modex stage gate (STG1) has been replaced by a collective operation in the modex itself that performs an allgather on the required modex info. The allgather is implemented using the orte_grpcomm framework since the BTL's are not active at that point. At the moment, the grpcomm framework only has a "basic" component analogous to OMPI's "basic" coll framework - I would recommend that the MPI team create additional, more advanced components to improve performance of this step.
The other stage gates have been replaced by orte_grpcomm barrier functions. We tried to use MPI barriers instead (since the BTL's are active at that point), but - as we discussed on the telecon - these are not currently true barriers so the job would hang when we fell through while messages were still in process. Note that the grpcomm barrier doesn't actually resolve that problem, but Brian has pointed out that we are unlikely to ever see it violated. Again, you might want to spend a little time on an advanced barrier algorithm as the one in "basic" is very simplistic.
Summarizing this change: ORTE no longer tracks process state nor has direct responsibility for synchronizing jobs. This is now done via collective operations within the MPI layer, albeit using ORTE collective communication services. I -strongly- urge the MPI team to implement advanced collective algorithms to improve the performance of this critical procedure.
2. reducing the volume of data exchanged during modex. Data in the modex consisted of the process name, the name of the node where that process is located (expressed as a string), plus a string representation of all contact info. The nodename was required in order for the modex to determine if the process was local or not - in addition, some people like to have it to print pretty error messages when a connection failed.
The size of this data has been reduced in three ways:
(a) reducing the size of the process name itself. The process name consisted of two 32-bit fields for the jobid and vpid. This is far larger than any current system, or system likely to exist in the near future, can support. Accordingly, the default size of these fields has been reduced to 16-bits, which means you can have 32k procs in each of 32k jobs. Since the daemons must have a vpid, and we require one daemon/node, this also restricts the default configuration to 32k nodes.
To support any future "mega-clusters", a configuration option --enable-jumbo-apps has been added. This option increases the jobid and vpid field sizes to 32-bits. Someday, if necessary, someone can add yet another option to increase them to 64-bits, I suppose.
(b) replacing the string nodename with an integer nodeid. Since we have one daemon/node, the nodeid corresponds to the local daemon's vpid. This replaces an often lengthy string with only 2 (or at most 4) bytes, a substantial reduction.
(c) when the mca param requesting that nodenames be sent to support pretty error messages, a second mca param is now used to request FQDN - otherwise, the domain name is stripped (by default) from the message to save space. If someone wants to combine those into a single param somehow (perhaps with an argument?), they are welcome to do so - I didn't want to alter what people are already using.
While these may seem like small savings, they actually amount to a significant impact when aggregated across the entire modex operation. Since every proc must receive the modex data regardless of the collective used to send it, just reducing the size of the process name removes nearly 400MBytes of communication from a 32k proc job (admittedly, much of this comm may occur in parallel). So it does add up pretty quickly.
3. routing RML messages to reduce connections. The default messaging system remains point-to-point - i.e., each proc opens a socket to every proc it communicates with and sends its messages directly. A new option uses the orteds as routers - i.e., each proc only opens a single socket to its local orted. All messages are sent from the proc to the orted, which forwards the message to the orted on the node where the intended recipient proc is located - that orted then forwards the message to its local proc (the recipient). This greatly reduces the connection storm we have encountered during startup.
It also has the benefit of removing the sharing of every proc's OOB contact with every other proc. The orted routing tables are populated during launch since every orted gets a map of where every proc is being placed. Each proc, therefore, only needs to know the contact info for its local daemon, which is passed in via the environment when the proc is fork/exec'd by the daemon. This alone removes ~50 bytes/process of communication that was in the current STG1 startup message - so for our 32k proc job, this saves us roughly 32k*50 = 1.6MBytes sent to 32k procs = 51GBytes of messaging.
Note that you can use the new routing method by specifying -mca routed tree - if you so desire. This mode will become the default at some point in the future.
There are a few minor additional changes in the commit that I'll just note in passing:
* propagation of command line mca params to the orteds - fixes ticket #1073. See note there for details.
* requiring of "finalize" prior to "exit" for MPI procs - fixes ticket #1144. See note there for details.
* cleanup of some stale header files
This commit was SVN r16364.
Short description: major changes include -
1. singletons now fork/exec a local daemon to manage their operations.
2. the orte daemon code now resides in libopen-rte
3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided.
I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine.
This commit was SVN r15390.
The default odls has been updated and works fine. The process odls has been updated, but I could not verify its operation. The bproc ODLS has not been updated yet. Ralph will look at it soon.
This commit was SVN r15257.
1. generalize orte_rml.xcast to become a general broadcast-like messaging system. Messages can now be sent to any tag on the daemons or processes. Note that any message sent via xcast will be delivered to ALL processes in the specified job - you don't get to pick and choose. At a later date, we will introduce an augmented capability that will use the daemons as relays, but will allow you to send to a specified array of process names.
2. extended orte_rml.xcast so it supports more scalable message routing methodologies. At the moment, we support three: (a) direct, which sends the message directly to all recipients; (b) linear, which sends the message to the local daemon on each node, which then relays it to its own local procs; and (b) binomial, which sends the message via a binomial algo across all the daemons, each of which then relays to its own local procs. The crossover points between the algos are adjustable via MCA param, or you can simply demand that a specific algo be used.
3. orteds no longer exhibit two types of behavior: bootproxy or VM. Orteds now always behave like they are part of a virtual machine - they simply launch a job if mpirun tells them to do so. This is another step towards creating an "orteboot" functionality, but also provided a clean system for supporting message relaying.
Note one major impact of this commit: multiple daemons on a node cannot be supported any longer! Only a single daemon/node is now allowed.
This commit is known to break support for the following environments: POE, Xgrid, Xcpu, Windows. It has been tested on rsh, SLURM, and Bproc. Modifications for TM support have been made but could not be verified due to machine problems at LANL. Modifications for SGE have been made but could not be verified. The developers for the non-verified environments will be separately notified along with suggestions on how to fix the problems.
This commit was SVN r15007.
To be precise, given this hypothetical launching pattern:
host1: vpids 0, 2, 4, 6
host2: vpids 1, 3, 5, 7
The local_rank for these procs would be:
host1: vpids 0->local_rank 0, v2->lr1, v4->lr2, v6->lr3
host2: vpids 1->local_rank 0, v3->lr1, v5->lr2, v7->lr3
and the number of local procs on each node would be four. If vpid=0 then does a comm_spawn of one process on host1, the values of the parent job would remain unchanged. The local_rank of the child process would be 0 and its num_local_procs would be 1 since it is in a separate jobid.
I have verified this functionality for the rsh case - need to verify that slurm and other cases also get the right values. Some consolidation of common code is probably going to occur in the SDS components to make this simpler and more maintainable in the future.
This commit was SVN r14706.
1. no -np provided - put one proc/node across all allocated nodes
2. -np N provided, N > #nodes - we print a pretty error message and exit
3. -np N provided, N <= #nodes - put one proc/node across N nodes
I also added a new orte constant (ORTE_ERR_SILENT) that allows us to pass up the chain that an error was encountered, but NOT print ORTE_ERROR_LOG messages. This is intended to be used for cases where the error we encounter is NOT an orte error, but rather is one associated with incorrect user input (e.g., the preceding case 2). In such cases, there is no point in printing an ORTE_ERROR_LOG chain of messages as it isn't an orte error.
This commit was SVN r12821.
Obviously, people like bproc will have to get the app_num via another avenue...but that's a problem for another day. Several options are easily available.
This commit was SVN r12788.
make this warning-proof, loop over the uint64_ts as an array of integers
and use %x. The final string is just as random and formatted exactly
the same, so we're all good in that department.
Refs trac:655
This commit was SVN r12742.
The following Trac tickets were found above:
Ticket 655 --> https://svn.open-mpi.org/trac/ompi/ticket/655
wider space than getpid()
* Include <time.h> to get time()'s prototype
* Fix typo that prevented using /dev/urandom on systems that had it
This commit was SVN r11780.
- use the OPAL functions for PATH and environment variables
- make all headers C++ friendly
- no unamed structures
- no implicit cast.
Plus a full implementation for the orte_wait functions.
This commit was SVN r11347.
different macros, one for each project. Therefore, now we have OPAL_DECLSPEC,
ORTE_DECLSPEC and OMPI_DECLSPEC. Please use them based on the sub-project.
This commit was SVN r11270.
Clean up the remainder of the size_t references in the runtime itself. Convert to orte_std_cntr_t wherever it makes sense (only avoid those places where the actual memory size is referenced).
Remove the obsolete oob barrier function (we actually obsoleted it a long time ago - just never bothered to clean it up).
I have done my best to go through all the components and catch everything, even if I couldn't test compile them since I wasn't on that type of system. Still, I cannot guarantee that problems won't show up when you test this on specific systems. Usually, these will just show as "warning: comparison between signed and unsigned" notes which are easily fixed (just change a size_t to orte_std_cntr_t).
In some places, people didn't use size_t, but instead used some other variant (e.g., I found several places with uint32_t). I tried to catch all of them, but...
Once we get all the instances caught and fixed, this should once and for all resolve many of the heterogeneity problems.
This commit was SVN r11204.
so that it does not return an error when no universe is passed to it.
Also put back in the 'Slots In Use' column as it is now working properly
per Ralphs recent ras commits. Still not sure what 'Slots Alloc' is meant
to represent, so left that as #if 0'd out for the moment.
This commit was SVN r10739.
The following SVN revision numbers were found above:
r10718 --> open-mpi/ompi@47eef2e002
Update the help text to report errors when not following that rule.
Also updated the RMAPS help text to reflect the reorganization of some of the round-robin code into the base.
The new functionality has been tested under Mac OS-X and on Odin using an MPI program. Both byslot and bynode mapping have been checked and verified. Operational support for other systems needs to be verified - I respectfully request people's help in doing so.
This commit was SVN r10708.
1. Modifies the RAS framework so it correctly stores and retrieves the actual slots in use, not just those that were allocated. Although the RAS node structure had storage for the number of slots in use, it turned out that the base function for storing and retrieving that information ignored what was in the field and simply set it equal to the number of slots allocated. This has now been fixed.
2. Modified the RMAPS framework so it updates the registry with the actual number of slots used by the mapping. Note that daemons are still NOT counted in this process as daemons are NOT mapped at this time. This will be fixed in 2.0, but will not be addressed in 1.x.
3. Added a new MCA parameter "rmaps_base_no_oversubscribe" that tells the system not to oversubscribe nodes even if the underlying environment permits it. The default is to oversubscribe if needed and the underlying environment permits it. I'm sure someone may argue "why would a user do that?", but it turns out that (looking ahead to dynamic resource reservations) sometimes users won't know how many nodes or slots they've been given in advance - this just allows them to say "hey, I'd rather not run if I didn't get enough".
4. Reorganizes the RMAPS framework to more easily support multiple components. A lot of the logic in the round_robin mapper was very valuable to any component - this has been moved to the base so others can take advantage of it.
5. Added a new test program "hello_nodename" - just does "hello_world" but also prints out the name of the node it is on.
6. Made the orte_ras_node_t object a full ORTE data type so it can more easily be copied, packed, etc. This proved helpful for the RMAPS code reorganization and might be of use elsewhere too.
This commit was SVN r10697.
After seeing the uglyness that is removing directories in the
codebase I decided to push down this to the OPAL by extending the
opal/os_create_dirpath.(c|h) to contain some more functionality.
In this process I renamed 'os_create_dirpath' to 'os_dirpath' since it
is a bit more general now.
Added a few functions to:
- check if an directory is empty
- check to see if the access permissions are set correctly
- destroy the directory at the end of the dirpath
- By using a caller callback function (a la Perl, I believe)
for every file, the caller can have fine grained control over
whether a specific file is deleted or not.
This simplifies things a bit for orte_session_dir_(finalize|cleanup)
as it should no longer contain any of this functionality, but uses
these functions to do the work.
From the external perspective nothing has changed, from the
developer point of view we have some cleaner, more generic code.
This commit was SVN r10640.
from the tmp/jjhursey-ft-cr branch.
In this commit we change the way universe names are created.
Before we by default first created "default-universe" then
if there was a conflict we created "default-universe-PID"
where PID is the PID of the HNP.
Now we create "default-universe-PID" all the time (when
a default universe name is used). This makes it much
easier when trying to find a HNP from an outside app
(e.g. orte-ps, orteconsole, ...)
This also adds a "search" function to find all of the
universes on the machine. This is useful in many contexts
when trying to find a persistent daemon or when trying to
connect to a HNP.
This commit also makes orte_universe_t an opal_object_t,
which is something that needed to happen, and only effected
the SDS in one of it's base functions.
I was asked to bring this over to aid in fixing orteconsole
and orteprobe. Due to the change of orte_universe_t to
an object orteprobe may need to be updated to reflect this
change. Since orteprobe needs to be looked at anyway I'll
leave this to Ralph to take care of.
*Note*:
These changes do not depend upon any of the FT work (but
the FT work does depend upon them). These were brought over
to help in fixing some of the ORTE tool set that require
the functionality layed out in this patch.
Testing:
Ran the 'ibm' tests before and after this change, and all was
as well as before the change. If anyone notices additional
irregularities in the system let me know. But none are expected.
This commit was SVN r10550.
- move files out of toplevel include/ and etc/, moving it into the
sub-projects
- rather than including config headers with <project>/include,
have them as <project>
- require all headers to be included with a project prefix, with
the exception of the config headers ({opal,orte,ompi}_config.h
mpi.h, and mpif.h)
This commit was SVN r8985.
originally suggested by Ralf Wildenhues, to try to speed autogen, configure,
and make (and possibly even make install). Use automake's include directive
to drastically reduce the number of Makefile files (although the number of
Makefile.am files is the same - most are just included in a top-level
Makefile.am). Also use an Automake SUBDIRs feature to eliminate the
dynamic-mca tree, which was no longer really needed. This makes adding
a framework easier (since you don't have to remember the dynamic-mca
tree) and makes building faster (as make doesn't have to recurse through
the dynamic-mca tree)
This commit was SVN r7777.
AM_INIT_AUTOMAKE, instead of the deprecated version.
* Work around dumbness in modern AC_INIT that requires the version
number to be set at autoconf time (instead of at configure time, as
it was before). Set the version number, minus the subversion r number,
at autoconf time. Override the internal variables to include the r
number (if needed) at configure time. Basically, the right thing
should always happen. The only place it might not is the version
reported as part of configure --help will not have an r number.
* Since AM_INIT_AUTOMAKE taks a list of options, no need to specify
them in all the Makefile.am files.
* Addes support for subdir-objects, meaning that object files are put
in the directory containing source files, even if the Makefile.am is
in another directory. This should start making it feasible to
reduce the number of Makefile.am files we have in the tree, which
will greatly reduce the time to run autogen and configure.
This commit was SVN r7211.
CTRL-C'd.
We were calling orte_finalize recursively which caused a segv when it tried to
use a freed framework (orte_rmgr in this case).
I added a status flag to orte_universe_info to indicate where we are in the code.
This was needed to determine if we should call orte_abort or not when shutting
down in the tcp oob.
This commit was SVN r7160.
1. user does NOT specify the universe name. For the default universe case, if we detect an existing default universe and cannot connect to it, we quietly create an alternative default name by adding the pid to the orte_default_universe name and move on - we no longer provide a warning message for this case.
2. user specified a universe name. If we detect an existing universe of that name and cannot connect to it, we consider this an error condition and abort.
This commit was SVN r7131.
tree.
- fix up #include's throughout the tree (yay contrib/search_replace.pl!)
- remove a few extraneous #include's
- remove orte_sys_info*() from opal_init()/opal_finalize() (it's
already in orte_init_stage1() and orte_system_finalize())
- remove dependencies in opal on orte_system_info -- util/os_path.c
and util/os_create_dirpath.c (they only used path_sep, anyway --
easily changed to #defines)
This commit was SVN r7059.
- change the framework opens to [mostly] use the new MCA param API
- properly pass in framework debug output streams to the
mca_base_component_open() function
This commit was SVN r6888.
* mpi_show_mca_params
If set to true, this turns on the dumping of all MCA parameters when MPI_INIT is called.
Only the 'rank 0' processes will print the parameters.
* mpi_show_mca_params_file
(This value is only used if the first argument is set to true) If this value is non-NULL
it specifies the file to put the dump into. This file can then be used as input to mpirun
for debugging purposes. If this value is not set (and mpi_show_mca_params is set) then
the parameters are dumped to stdout.
This commit was SVN r6401.
