prepare the upcoming persistent collectives by pre-factoring some code
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
fixup 808c3c62cd9475edd91ecde9d2d53b12e28b2c04
Implements butterfly algorithm for MPI_Reduce_scatter.
The algorithm can be used both by commutative and non-commutative operations, for power-of-two and non-power-of-two number of processes.
Signed-off-by: Mikhail Kurnosov <mkurnosov@gmail.com>
Per MPI-3.1:8.7.1 p361:11-13, it's valid for MPI_FINALIZED to be
invoked during an attribute destruction callback (e.g., during the
destruction of keyvals on MPI_COMM_SELF during the very beginning of
MPI_FINALIZE). In such cases, MPI_FINALIZED must return "false".
Prior to this commit, we hung in FINALIZED if it were invoked during
a COMM_SELF attribute destruction callback in FINALIZE. See
https://github.com/open-mpi/ompi/issues/5084.
This commit converts the MPI_INITIALIZED / MPI_FINALIZED
infrastructure to use a single enum (ompi_mpi_state, set atomically)
to represent the state of MPI:
- not initialized
- init started
- init completed
- finalize started
- finalize past COMM_SELF destruction
- finalize completed
The "finalize past COMM_SELF destruction" state is what allows us to
return "false" from MPI_FINALIZED before COMM_SELF has been fully
destroyed / all attribute callbacks have been invoked.
Since this state is checked at nearly every MPI API call (to see if
we're outside of the INIT/FINALIZE epoch), care was taken to use
atomics to *set* the ompi_mpi_state value in ompi_mpi_init() and
ompi_mpi_finalize(), but performance-critical code paths can simply
read the variable without needing to use a slow call to an
opal_atomic_*() function.
Thanks to @AndrewGaspar for reporting the issue.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Implements butterfly algorithm for MPI_Reduce_scatter_block.
The algorithm can be used both by commutative and non-commutative
operations, for power-of-two and non-power-of-two number of processes.
Signed-off-by: Mikhail Kurnosov <mkurnosov@gmail.com>
- rename ompi_coll_base_reduce_scatter_block_basic to
more self descriptive ompi_coll_base_reduce_scatter_block_basic_linear
- fix the description of the coll_tuned_reduce_scatter_block_algorithm
MCA param
this fixes and documents previous open-mpi/ompi@0e8b35b615
MPI_Reduce_scatter_block used to be implemented by the coll/basic module only.
A new algo (recursive doubling) was recently introduced and can be used via the coll/tuned module,
but we never intended to make it the default algo.
In order to "restore" the previous default, the initial algo was moved from coll/basic to coll/base,
and is now used by default by coll/tuned.
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
Implements recursive doubling algorithm for MPI_Scan and MPI_Exscan.
The algorithm preserves order of operations so it can be used both
by commutative and non-commutative operations.
Signed-off-by: Mikhail Kurnosov <mkurnosov@gmail.com>
This commit fixes a flaw in the progress function for libnbc. The
function was unconditionally taking a lock even if there are no
requests to process. This lock was showing up in vtune traces of
multi-threaded benchmarks.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
The osc monitoring component needed to include other OSC components
header in order to be able tu access communicator through the
component specific ompi_osc_*_module_t structures. This commit remove
the dependency, and resolve the issue #4523.
Extend the common monitoring API.
* Now it's possible to translate from local rank to world rank from
both the communicator and the group.
* Remove useless hashtable as we directly use the w_group contained
in window structure.
Add automatic generation at config time.
The templates are expanded at configure time. It creates a new header
file that generates all the variables/functions needed. Adding this
during the autogen automagicaly generates for each of the available
modules the proper functions.
Only keep a generated argv-style array.
Following Jeff's advice, the configure.m4 file generate a simple array
of module variables to be iterated over to find the proper module.
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
This commit adds support for fetch-and-op atomics. This is needed
because and and or are irreversible operations so there needs to be a
way to get the old value atomically. These are also the only semantics
supported by C11 (there is not atomic_op_fetch, just
atomic_fetch_op). The old op-and-fetch atomics have been defined in
terms of fetch-and-op.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit renames the arithmetic atomic operations in opal to
indicate that they return the new value not the old value. This naming
differentiates these routines from new functions that return the old
value.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
If hcoll fails to create mpi derived type let's set zero_dte on this dtype.
This will save cycles on subsequent collective calls with the same derived
type since we will not try to create hcoll type again.
Signed-off-by: Valentin Petrov <valentinp@mellanox.com>
Remove two of the three instances of components requiring
64 bit atomics, even on 32 bit systems. The SM OSC component
also uses 64 bit atomics, but is a more complicated fix that
will follow this one. Currently, no one is testing on
platforms that don't provide 64 bit atomics (even in 32 bit
mode), but with the removal of the non-inline assembly for
IA32, the older compilers on Absoft's test systems now
result in no practical way to call cmpxchg8 in 32 bit mode.
At that point, these failures started popping up.
Signed-off-by: Brian Barrett <bbarrett@amazon.com>
* Resolves#3705
* Components should link against the project level library to better
support `dlopen` with `RTLD_LOCAL`.
* Extend the `mca_FRAMEWORK_COMPONENT_la_LIBADD` in the `Makefile.am`
with the appropriate project level library:
```
MCA components in ompi/
$(top_builddir)/ompi/lib@OMPI_LIBMPI_NAME@.la
MCA components in orte/
$(top_builddir)/orte/lib@ORTE_LIB_PREFIX@open-rte.la
MCA components in opal/
$(top_builddir)/opal/lib@OPAL_LIB_PREFIX@open-pal.la
MCA components in oshmem/
$(top_builddir)/oshmem/liboshmem.la"
```
Note: The changes in this commit were automated by the script in
the commit that proceeds it with the `libadd_mca_comp_update.py`
script. Some components were not included in this change because
they are statically built only.
Signed-off-by: Joshua Hursey <jhursey@us.ibm.com>
Passed the below set of symbols into a script that added ompi_ to them all.
Note that if processing a symbol named "foo" the script turns
foo into ompi_foo
but doesn't turn
foobar into ompi_foobar
But beyond that the script is blind to C syntax, so it hits strings and
comments etc as well as vars/functions.
coll_base_comm_get_reqs
comm_allgather_pml
comm_allreduce_pml
comm_bcast_pml
fcoll_base_coll_allgather_array
fcoll_base_coll_allgatherv_array
fcoll_base_coll_bcast_array
fcoll_base_coll_gather_array
fcoll_base_coll_gatherv_array
fcoll_base_coll_scatterv_array
fcoll_base_sort_iovec
mpit_big_lock
mpit_init_count
mpit_lock
mpit_unlock
netpatterns_base_err
netpatterns_base_verbose
netpatterns_cleanup_narray_knomial_tree
netpatterns_cleanup_recursive_doubling_tree_node
netpatterns_cleanup_recursive_knomial_allgather_tree_node
netpatterns_cleanup_recursive_knomial_tree_node
netpatterns_init
netpatterns_register_mca_params
netpatterns_setup_multinomial_tree
netpatterns_setup_narray_knomial_tree
netpatterns_setup_narray_tree
netpatterns_setup_narray_tree_contigous_ranks
netpatterns_setup_recursive_doubling_n_tree_node
netpatterns_setup_recursive_doubling_tree_node
netpatterns_setup_recursive_knomial_allgather_tree_node
netpatterns_setup_recursive_knomial_tree_node
pml_v_output_close
pml_v_output_open
intercept_extra_state_t
odls_base_default_wait_local_proc
_event_debug_mode_on
_evthread_cond_fns
_evthread_id_fn
_evthread_lock_debugging_enabled
_evthread_lock_fns
cmd_line_option_t
cmd_line_param_t
crs_base_self_checkpoint_fn
crs_base_self_continue_fn
crs_base_self_restart_fn
event_enable_debug_output
event_global_current_base_
event_module_include
eventops
sync_wait_mt
trigger_user_inc_callback
var_type_names
var_type_sizes
Signed-off-by: Mark Allen <markalle@us.ibm.com>
