Let imagine that we have two btls in btl_openib_component_init() both points to the same openib_btl->device and as a result have the same openib_btl->device->endpoints array.
Finalization phase calls twice mca_btl_openib_finalize()->mca_btl_openib_finalize_resources().
mca_btl_openib_finalize_resources() frees endpoint related btl. But the second call of mca_btl_openib_finalize_resources() checks endpoint that is released by previus call.
fixed by Igor, reviewed by miked/vasily
cmr=v1.7.4:reviewer=ompi-gk1.7
This commit was SVN r29563.
This commit moves all the module stats into their own struct so that
the stats only need to appear as a single line in the module_t
definition, and then moves all the logic for reporting the stats into
btl_usnic_stats.c|h.
Further, the stats are now exported as MPI_T_BIND_NO_OBJECT entities
(i.e., not bound to any particular MPI handle), and are marked as
READONLY and CONTINUOUS. They currently all default to verbose level
5 ("Application tuner / detailed", according to
https://svn.open-mpi.org/trac/ompi/wiki/MCAParamLevels).
Most of the statistics are counters, but a small number are high
watermark values. Due to how counters are reported via MPI_T, none of
the counters are exported through MPI_T if the MCA param
btl_usnic_stats_relative=1 (i.e., the module resets the stats back to
zero at a given frequency).
When MPI_T_pvar_handle_alloc() is invoked on any of these pvars, it
will return a count that is equal to the number of active usnic BTL
modules. The values returned for any given pvar (e.g.,
num_total_sends) are an array containing one value for each active
usnic BTL module. The ordering of values in the array is both
consistent across all usnic pvars and stable throughout a single job:
array slot 0 corresponds to module X, array slot 1 corresponds to
module Y, etc.
Mapping which array slot corresponds to which underlying Linux usnic_X
device works as follows:
* The btl_usnic_devices MPI_T state pvar is associated with a
btl_usnic_device MPI_T enum, and be obtained via
MPI_T_pvar_get_info().
* If all usNIC pvars are of length N, the values [0,N) in the
btl_usnic_device enum are associated with strings of the
corresponding underlying Linux device.
For exampe, to look up which Linux device is reported in all usNIC
pvars' array slot 1, look up the int value 1 in the btl_usnic_devices
enum. Its corresponding string value is underlying Linux device name
(e.g., "usnic_1").
cmr=v1.7.4:subject="usnic BTL MPI_T pvars"
This commit was SVN r29545.
r29479.
This fixes some issues reported awhile ago in the openib btl. There
are a couple more unchecked mallocs but they are a bit more difficult
to fix since they are in void functions (btl_openib_endpoint.c).
Refs trac:2401.
cmr=v1.7.4:reviewer=miked
This commit was SVN r29543.
The following SVN revision numbers were found above:
r29479 --> open-mpi/ompi@d6ead2a3a5
The following Trac tickets were found above:
Ticket 2401 --> https://svn.open-mpi.org/trac/ompi/ticket/2401
and tuned to correctly handle 0 recvcounts.
Tested with the reproducer from #1550.
Refs trac:1559
This commit was SVN r29542.
The following Trac tickets were found above:
Ticket 1559 --> https://svn.open-mpi.org/trac/ompi/ticket/1559
Due to deallocation ordering (and an entirely missed deallocation), we
were leaking modest amounts of memory inside libusnic_verbs.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
This commit was SVN r29485.
- some free lists simply were not being OBJ_DESTRUCTed, so they never
freed their internal memory
- channel->recv_segs.ctx was being assigned in a way that got clobbered
by ompi_free_list_init_new, so the cleanup code that relied on it
being set never ran
- numerous other ".ctx" assignments were similarly ineffectual and were
not being consumed, so I deleted them
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
This commit was SVN r29484.
This new routine can be called in exceptional situations, either
conditionally in BTL code or from a debugger, to help with debugging in
cases where MSGDEBUG1/2 or stats logging are impractical but more detail
is needed.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
This commit was SVN r29483.
Pull the bulk of the functionality out into a new routine,
ompi_btl_usnic_print_stats, which can be used in other debugging
contexts. This also lets us eliminate the module->final_stats state
tracking.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
This commit was SVN r29482.
Follow the convention established by the ompi/mca/common/sm tree and
prefix both the "install" and "no install" versions of the build with
"lib" so that Automake doesn't complain. Differentiate the two by
adding a "_noinst" suffix to the "no install" version.
This commit was SVN r29462.
This change contains a non-mandatory modification
of the MPI-RTE interface. Anyone wishing to support
coprocessors such as the Xeon Phi may wish to add
the required definition and underlying support
****************************************************************
Add locality support for coprocessors such as the Intel Xeon Phi.
Detecting that we are on a coprocessor inside of a host node isn't straightforward. There are no good "hooks" provided for programmatically detecting that "we are on a coprocessor running its own OS", and the ORTE daemon just thinks it is on another node. However, in order to properly use the Phi's public interface for MPI transport, it is necessary that the daemon detect that it is colocated with procs on the host.
So we have to split the locality to separately record "on the same host" vs "on the same board". We already have the board-level locality flag, but not quite enough flexibility to handle this use-case. Thus, do the following:
1. add OPAL_PROC_ON_HOST flag to indicate we share a host, but not necessarily the same board
2. modify OPAL_PROC_ON_NODE to indicate we share both a host AND the same board. Note that we have to modify the OPAL_PROC_ON_LOCAL_NODE macro to explicitly check both conditions
3. add support in opal/mca/hwloc/base/hwloc_base_util.c for the host to check for coprocessors, and for daemons to check to see if they are on a coprocessor. The former is done via hwloc, but support for the latter is not yet provided by hwloc. So the code for detecting we are on a coprocessor currently is Xeon Phi specific - hopefully, we will find more generic methods in the future.
4. modify the orted and the hnp startup so they check for coprocessors and to see if they are on a coprocessor, and have the orteds pass that info back in their callback message. Automatically detect that coprocessors have been found and identify which coprocessors are on which hosts. Note that this algo isn't scalable at the moment - this will hopefully be improved over time.
5. modify the ompi proc locality detection function to look for coprocessor host info IF the OMPI_RTE_HOST_ID database key has been defined. RTE's that choose not to provide this support do not have to do anything - the associated code will simply be ignored.
6. include some cleanup of the hwloc open/close code so it conforms to how we did things in other frameworks (e.g., having a single "frame" file instead of open/close). Also, fix the locality flags - e.g., being on the same node means you must also be on the same cluster/cu, so ensure those flags are also set.
cmr:v1.7.4:reviewer=hjelmn
This commit was SVN r29435.
The following common shared libraries did not have versioning:
* ompi/common/ofacm
* ompi/common/verbs
* ompi/common/ugni
Additionally, we still had shared library versions in VERSION for the
following libraries, which no longer exist:
* ompi/common/portals
* opal/common/hwloc
This commit was SVN r29421.
Fix two problems that surfaced when using direct launch under SLURM:
1. locally store our own data because some BTLs want to retrieve
it during add_procs rather than use what they have internally
2. cleanup MPI_Abort so it correctly passes the error status all
the way down to the actual exit. When someone implemented the
"abort_peers" API, they left out the error status. So we lost
it at that point and *always* exited with a status of 1. This
forces a change to the API to include the status.
cmr:v1.7.3:reviewer=jsquyres:subject=Fix MPI_Abort and modex_recv for direct launch
This commit was SVN r29405.
So we now allow singletons to start on their own, only spawning an HNP when initiating an operation that actually requires it.
cmr:v1.7.4:reviewer=jsquyres
This commit was SVN r29354.
The algorithms are intended for MPI-3.0 compliance and are not
optimized. We should aim to add better algorithms in the future through
cheetah.
MPI_Iallreduce and MPI_Igatherv on intercommunicators are required for
MPI_Comm_idup support.
cmr=v1.7.4:reviewer=brbarret:ticket=trac:2715
This commit was SVN r29333.
The following Trac tickets were found above:
Ticket 2715 --> https://svn.open-mpi.org/trac/ompi/ticket/2715
1. Change in rte api implementation: now comm_world used to do p2p.
This allows to not worry about other comms being destroyed.
2. added a notification mechanism with a help of which runtime can say libhcoll that RTE api can not be used any longer.
pass a pointer to a flag, and its size to libhcoll.
The flag changes when the RTE is no longer available.
Currently this flag is just ompi_mpi_finalized global bool value.
cmr=v1.7.3:reviewer=jladd
This commit was SVN r29331.
Create a new required key in the OMPI layer for retrieving a "node id" from the database. ALL RTE'S MUST DEFINE THIS KEY. This allows us to compute locality in the MPI layer, which is necessary when we do things like intercomm_create.
cmr:v1.7.4:reviewer=rhc:subject=Cleanup handling of modex data
This commit was SVN r29274.
arrays.
The MPI 3.0 standard added const to all in buffers in the C bindings. This
commit adds the const keyword and in most cases casts const away. We will
eventually should go through and update the various interfaces (coll, pml,
io, etc) to take the const keyword. The group, comm, win, and datatype
interfaces have been updated with const.
cmr=v1.7.4:ticket=trac:3785:reviewer=jsquyres
This commit was SVN r29266.
The following Trac tickets were found above:
Ticket 3785 --> https://svn.open-mpi.org/trac/ompi/ticket/3785
