around OMPI_SETUP_MPI_FORTRAN in r27817 when removing the OPAL hacks for the
no-Fortran case. Then r27821 worked around a build issue caused by
r27817 in a sub-optimal way.
This commit was SVN r27826.
The following SVN revision numbers were found above:
r27817 --> open-mpi/ompi@fc3df11e08
r27821 --> open-mpi/ompi@0ede5be003
OMPI_WANT_FORTRAN_BINDINGS to 0 so that all the Fortran tests that
examine that variable have a numeric value to compare against.
This commit was SVN r27821.
actually care if opal_pointer_array is limited to handle_max already passes
that in as the max_size during init, so don't need it there. The arch
constant was a bit more difficult, so pass that in during MPI init and
leave empty otherwise.
This is to help with the effort to allow building ompi against an external
opal or orte.
This commit was SVN r27817.
to compile. With recent Autoconf versions, AC_CHECK_HEADERS only succeeds
if the header compiles, so need to check these two with sys/param.h
explicitly included in the search list...
This commit was SVN r27715.
* We always build OPAL, so always do the filesystem case-sensitivity
check
* Protect the extra ORTE/OMPI macros with "if we're building this
project..." tests
This commit was SVN r27699.
additional functionality. Rationale (refs trac:3422):
* Normal MPI applications only ever use the MPI API. Hence, -lmpi is
sufficient (they'll never directly call ORTE or OPAL
functions). This is arguably the most common case.
* That being said, we do have some test programs (e.g., those in
orte/test/mpi) that call MPI functions but also call ORTE/OPAL
functions. I've also written the occasional MPI test program that
calls opal_output, for example (there even might be a few tests in
the IBM test suite that directly call ORTE/OPAL functions).
* Even though this is not a common case, these applications should
also compile/link with mpicc.
* So we should add a --openmpi:linkall option that will also link
in whatever is necessary to call ORTE/OPAL functions
* Yes, we could hard-code "-lopen-rte -lopen-pal" in Makefiles, but
we do reserve the right to change those library names and/or add
others someday, so it's better to abstract out the names and let
the wrapper supply whatever is necessary.
* ORTE programs, however, are different. They almost always call OPAL
functions (e.g., if they want to send a message, they must use the
OPAL DSS). As such, it seems like the ORTE programs should always
link in OPAL.
Therefore:
* Add undocumented --openmpi:linkall flag to the wrapper compilers.
See the comment in opal_wrapper.c for an explanation of what it
does. This flag is only intended for Open MPI developers -- not
end users. That's why it's undocumented.
* Update orte/test/mpi/Makefile.am to add --openmpi:linkall
* Make ortecc/ortec++'s wrapper data text files always explicitly
link in libopen-pal
This commit was SVN r27670.
The following SVN revision numbers were found above:
r27668 --> open-mpi/ompi@cf845897aa
The following Trac tickets were found above:
Ticket 3422 --> https://svn.open-mpi.org/trac/ompi/ticket/3422
1. Restore libopen-pal.la, libopen-rte.la, and libmpi.la to be
separate entities (i.e., don't have libopen-rte.la include
libopen-pal.la, and don't have libmpi.la include libopen-pal.la).
Yay!
1. Consequently, make the wrapper compilers look for flags indicating
that the user wants to compile statically (currently: -static,
!--static, -Bstatic, and "-Wl," in front of all of those). If it
is, follow a 6-way matrix for determinining which libraries to
list on the underlying command line.
1. To support that, add the name of a token static and dynamic
library to look for in each of the wrapper compiler data files.
1. Fix a long-standing typo in the opalcc wrapper data file.
This commit was SVN r27662.
- fix the Fortran layer to use new macros to convert Fortran-to-C status
- change the C internals to pull out old OMPI_SET_STATUS* macros
Also, change name of "status" argument in topo_test_f.c to "topo_type".
This commit was SVN r27403.
particularly with respect to threading flags.
Before this change, the following scenario would fail (e.g., on Linux
with pthreads):
{{{
$ ./configure --disable-shared --enable-static ...
$ make clean install
$ cd examples
$ make clean all
}}}
Linking the Fortran examples would fail with missing pthread symbols.
This commit was SVN r26927.
1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler
1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release
1. The mpi module has been re-implemented and is significantly "mo' bettah"
1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module
This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk.
== More details ==
Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7.
Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey:
* Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort)
* The Fortran J3 committee
* Tobias Burnus/gfortran
* Tony !Goetz/Absoft
* Terry !Donte/Oracle
* ...and probably others whom I'm forgetting :-(
There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax.
Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time.
As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory:
{{{
ompi/mpi/fortran/
base/ - glue code
mpif-h/ - what used to be ompi/mpi/f77
use-mpi-tkr/ - what used to be ompi/mpi/f90
use-mpi-ignore-tkr/ - new mpi module implementation
use-mpi-f08/ - new mpi_f08 module implementation
}}}
There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version.
Other things that were done:
* ompi_info grew a few new output fields to describe what level of Fortran support is included
* Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added
* The old Fortran MPI libraries were renamed:
* libmpi_f77 -> libmpi_mpifh
* libmpi_f90 -> libmpi_usempi
* The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example:
{{{
shell$ ./configure CC=icc CXX=icpc FC=ifort ...
}}}
All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches).
I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed.
This commit was SVN r26283.
either direct link to these basic predefined types, or a combination of them.
Anyway, the first items in the datatype list belong to OPAL, the second round
are MPI datatypes created by composing basic OPAL datatypes, and the last
batch are mapped datatype (direct correspondance between an OMPI datatype and
an OPAL one such as int -> int32_t).
Modify the op to fit this new scheme.
This commit was SVN r24247.
This is a fairly intrusive change, but outside of the moving of opal/event to opal/mca/event, the only changes involved (a) changing all calls to opal_event functions to reflect the new framework instead, and (b) ensuring that all opal_event_t objects are properly constructed since they are now true opal_objects.
Note: Shiqing has just returned from vacation and has not yet had a chance to complete the Windows integration. Thus, this commit almost certainly breaks Windows support on the trunk. However, I want this to have a chance to soak for as long as possible before I become less available a week from today (going to be at a class for 5 days, and thus will only be sparingly available) so we can find and fix any problems.
Biggest change is moving the libevent code from opal/event to a new opal/mca/event framework. This was done to make it much easier to update libevent in the future. New versions can be inserted as a new component and tested in parallel with the current version until validated, then we can remove the earlier version if we so choose. This is a statically built framework ala installdirs, so only one component will build at a time. There is no selection logic - the sole compiled component simply loads its function pointers into the opal_event struct.
I have gone thru the code base and converted all the libevent calls I could find. However, I cannot compile nor test every environment. It is therefore quite likely that errors remain in the system. Please keep an eye open for two things:
1. compile-time errors: these will be obvious as calls to the old functions (e.g., opal_evtimer_new) must be replaced by the new framework APIs (e.g., opal_event.evtimer_new)
2. run-time errors: these will likely show up as segfaults due to missing constructors on opal_event_t objects. It appears that it became a typical practice for people to "init" an opal_event_t by simply using memset to zero it out. This will no longer work - you must either OBJ_NEW or OBJ_CONSTRUCT an opal_event_t. I tried to catch these cases, but may have missed some. Believe me, you'll know when you hit it.
There is also the issue of the new libevent "no recursion" behavior. As I described on a recent email, we will have to discuss this and figure out what, if anything, we need to do.
This commit was SVN r23925.
* Update to be safe for AC 2.68 by using AC_LINK_IFELSE instead of
AC_TRY_LINK
* If enable visibility was used, ensure we fail if the compiler
doesn't support it
* Rename OMPI_CHECK_VISIBILITY -> OPAL_CHECK_VISIBILITY (and all
internal variables)
This commit was SVN r23923.
This merges the branch containing the revamped build system based around converting autogen from a bash script to a Perl program. Jeff has provided emails explaining the features contained in the change.
Please note that configure requirements on components HAVE CHANGED. For example. a configure.params file is no longer required in each component directory. See Jeff's emails for an explanation.
This commit was SVN r23764.
operations, not ints.
Sorry for the mid-day configure.ac change, folks...
This commit was SVN r23449.
The following Trac tickets were found above:
Ticket 2472 --> https://svn.open-mpi.org/trac/ompi/ticket/2472
rename OMPI_CHECK_ATTRIBUTES -> OPAL_CHECK_ATTRIBUTES, because it's in
OPAL (somehow that name must have gotten missed in the Great M4 split
of '10...?)
This commit was SVN r23267.
got missed in r23189. It's part of the --with-libltdl changes.
This commit was SVN r23191.
The following SVN revision numbers were found above:
r23189 --> open-mpi/ompi@e597c4f9cd
