1. Changed rng_buff_t --> opal_rng_buff_t
2. All global variables obey the prefix rule
3. Old code has been removed
4. Found a couple of unnecessary includes
Refs trac:4298
This commit was SVN r30807.
The following Trac tickets were found above:
Ticket 4298 --> https://svn.open-mpi.org/trac/ompi/ticket/4298
Also add a verbose flag so one can see what devices are selected as well as another flag to override
locality information and use all devices on the node.
This commit was SVN r30287.
configury/Makefile.am changes; this commit renames the internal
installdirs.h framework struct field names to match the configry macro
names:
* pkgdatdir -> ompidatadir
* pkglibdir -> ompilibdir
* pkgincludedir -> ompiincludedir
This commit was SVN r30145.
The following SVN revision numbers were found above:
r30140 --> open-mpi/ompi@8b778903d8
Per RFC which expired two weeks ago:
We are planning to make a change to Open MPI to always set up the btls. This
means the btl init will be called even if add_procs is never called for that
btl. In the openib btl free lists fragments are currently allocated in btl_init.
To avoid wasting that memory this commit moves that final device setup to
the add_procs function. This included allocating free lists, and starting the
async event thread.
At this time this change is safe since we have a barrier after add_procs in
MPI_Init. If this changes we will need to re-think some of the initialization
since we might have the possibility of a connection request before add_procs
is called.
Tested with Mellanox ConnectX2 and QLogic HCAs.
Commit also cleans up tabs in btl_openib_async.c.
cmr=v1.7.5:reviewer=miked
This commit was SVN r30122.
r29479.
This fixes some issues reported awhile ago in the openib btl. There
are a couple more unchecked mallocs but they are a bit more difficult
to fix since they are in void functions (btl_openib_endpoint.c).
Refs trac:2401.
cmr=v1.7.4:reviewer=miked
This commit was SVN r29543.
The following SVN revision numbers were found above:
r29479 --> open-mpi/ompi@d6ead2a3a5
The following Trac tickets were found above:
Ticket 2401 --> https://svn.open-mpi.org/trac/ompi/ticket/2401
Turns out that AC_CHECK_DECLS is one of the "new style" Autoconf
macros that #defines the output to be 0 or 1 (vs. #define'ing or
#undef'ing it). So don't check for "#if defined(..."; just check for
"#if ...".
This commit was SVN r29059.
The following Trac tickets were found above:
Ticket 3730 --> https://svn.open-mpi.org/trac/ompi/ticket/3730
Commit r27211 added ifdef checks for #define
HAVE_IBV_LINK_LAYER_ETHERNET, which is incorrect. The correct #define
is HAVE_DECL_IBV_LINK_LAYER_ETHERNET. This broke OMPI over iWARP.
This fixes trac:3726 and should be added to cmr:v1.7.3:reviewer=jsquyres
This commit was SVN r29053.
The following SVN revision numbers were found above:
r27211 --> open-mpi/ompi@b27862e5c7
The following Trac tickets were found above:
Ticket 3726 --> https://svn.open-mpi.org/trac/ompi/ticket/3726
* add a new MCA param orte_hostname_cutoff to specify the number of nodes at which we stop including hostnames. This defaults to INT_MAX => always include hostnames. If a value is given, then we will include hostnames for any allocation smaller than the given limit.
* remove ompi_proc_get_hostname. Replace all occurrences with a direct link to ompi_proc_t's proc_hostname, protected by appropriate "if NULL"
* modify the OMPI-ORTE integration component so that any call to modex_recv automatically loads the ompi_proc_t->proc_hostname field as well as returning the requested info. Thus, any process whose modex info you retrieve will automatically receive the hostname. Note that on-demand retrieval is still enabled - i.e., if we are running under direct launch with PMI, the hostname will be fetched upon first call to modex_recv, and then the ompi_proc_t->proc_hostname field will be loaded
* removed a stale MCA param "mpi_keep_peer_hostnames" that was no longer used anywhere in the code base
* added an envar lookup in ess/pmi for the number of nodes in the allocation. Sadly, PMI itself doesn't provide that info, so we have to get it a different way. Currently, we support PBS-based systems and SLURM - for any other, rank0 will emit a warning and we assume max number of daemons so we will always retain hostnames
This commit was SVN r29052.
This creates a really bad scaling behavior. Users have found a nearly 20% launch time differential between mpirun and PMI, with PMI being the slower method. Some of the problem is attributable to poor exchange algorithms in RM's like Slurm and Alps, but we make things worse by calling "get" so many times.
Nathan (with a tad advice from me) has attempted to alleviate this problem by reducing the number of "get" calls. This required the following changes:
* upon first request for data, have the OPAL db pmi component fetch and decode *all* the info from a given remote proc. It turned out we weren't caching the info, so we would continually request it and only decode the piece we needed for the immediate request. We now decode all the info and push it into the db hash component for local storage - and then all subsequent retrievals are fulfilled locally
* reduced the amount of data by eliminating the exchange of the OMPI_ARCH value if heterogeneity is not enabled. This was used solely as a check so we would error out if the system wasn't actually homogeneous, which was fine when we thought there was no cost in doing the check. Unfortunately, at large scale and with direct launch, there is a non-zero cost of making this test. We are open to finding a compromise (perhaps turning the test off if requested?), if people feel strongly about performing the test
* reduced the amount of RTE data being automatically fetched, and fetched the rest only upon request. In particular, we no longer immediately fetch the hostname (which is only used for error reporting), but instead get it when needed. Likewise for the RML uri as that info is only required for some (not all) environments. In addition, we no longer fetch the locality unless required, relying instead on the PMI clique info to tell us who is on our local node (if additional info is required, the fetch is performed when a modex_recv is issued).
Again, all this only impacts direct launch - all the info is provided when launched via mpirun as there is no added cost to getting it
Barring objections, we may move this (plus any required other pieces) to the 1.7 branch once it soaks for an appropriate time.
This commit was SVN r29040.
value to signal that the operation of retrieving the element from the free list
failed. However in this case the returned pointer was set to NULL as well, so the
error code was redundant. Moreover, this was a continuous source of warnings when
the picky mode is on.
The attached parch remove the rc argument from the OMPI_FREE_LIST_GET and
OMPI_FREE_LIST_WAIT macros, and change to check if the item is NULL instead of
using the return code.
This commit was SVN r28722.
commit is the trunk version of what is needed for #3626.
Add the "ignore_device" field to the INI file. This allows us to
specifically list devices that should be ignored by the openib BTL
(such as the Intel Phi, at least as of May 2013 -- see #3626).
Also add the Intel Phi to the ini file, and set its ignore_device=1.
Finally, add the concept of counting intentionally ignored verbs
devices. Devices are ignored for one of two reasons:
* If the number of allowed ports on that device is 0 (i.e., if
if_include/if_exclude was set such that we're intentionally
ignoring this device).
* If the INI ignore_device field for this device is set to 1.
Once we have the count of devices that were intentionally ignored,
only show the "Hey, there's verbs devices that you're not using!"
show_help message if there are devices that were ''unintentionally''
ignored.
This commit was SVN r28589.
The following Trac tickets were found above:
Ticket 3626 --> https://svn.open-mpi.org/trac/ompi/ticket/3626
(i.e., ensure that more data items get zeroed out/set to NULL) so that
if something goes wrong during initialization, we don't try to clean
up something that isn't there (and segv).
The chance of this happening on the trunk is very low (and will also
be low once the verbs improvements are brought over to v1.7). But it
can actually happen in the v1.6 branch (e.g., if no CPC is available,
we'll try to get the length of the endpoints list, but the endpoints
list is NULL).
Hence, even though the real goal is to get this functionality over to
v1.6, I figured I'd commit to the trunk/CMR to v1.7 just to try to
keep commonality in the openib between all three where possible.
This commit was SVN r28317.
Features:
- Support for an override parameter file (openmpi-mca-param-override.conf).
Variable values in this file can not be overridden by any file or environment
value.
- Support for boolean, unsigned, and unsigned long long variables.
- Support for true/false values.
- Support for enumerations on integer variables.
- Support for MPIT scope, verbosity, and binding.
- Support for command line source.
- Support for setting variable source via the environment using
OMPI_MCA_SOURCE_<var name>=source (either command or file:filename)
- Cleaner API.
- Support for variable groups (equivalent to MPIT categories).
Notes:
- Variables must be created with a backing store (char **, int *, or bool *)
that must live at least as long as the variable.
- Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of
mca_base_var_set_value() to change the value.
- String values are duplicated when the variable is registered. It is up to
the caller to free the original value if necessary. The new value will be
freed by the mca_base_var system and must not be freed by the user.
- Variables with constant scope may not be settable.
- Variable groups (and all associated variables) are deregistered when the
component is closed or the component repository item is freed. This
prevents a segmentation fault from accessing a variable after its component
is unloaded.
- After some discussion we decided we should remove the automatic registration
of component priority variables. Few component actually made use of this
feature.
- The enumerator interface was updated to be general enough to handle
future uses of the interface.
- The code to generate ompi_info output has been moved into the MCA variable
system. See mca_base_var_dump().
opal: update core and components to mca_base_var system
orte: update core and components to mca_base_var system
ompi: update core and components to mca_base_var system
This commit also modifies the rmaps framework. The following variables were
moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode,
rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables.
This commit was SVN r28236.
ompi_show_help, because opal_show_help is replaced with an
aggregating version when using ORTE, so there's no reason to
directly call orte_show_help.
This commit was SVN r28051.
* btl sendi(): if message can be send inline try to avoid signal
* signal is requested one per 64 or when
there are no send wqes
when message can not be send inline
any other btl method then sendi()
This commit was SVN r27724.
