The rdma_frag attached to the send request was not correctly released
upon request completion, leaking until MPI_Finalize. A quick solution
would have been to add RDMA_FRAG_RETURN at different locations on the
send request completion, but it would have unnecessarily made the
sendreq completion path more complex. Instead, I added the length to
the RDMA fragment so that it can be completed during the remote ack.
Be more explicit on the comment.
The rdma_frag can only be freed once when the peer forced a protocol
change (from RDMA GET to send/recv). Otherwise the fragment will be
returned once all data pertaining to it has been trasnferred.
Signed-off-by: George Bosilca <bosilca@icl.utk.edu>
There are a couple MPI_Alltoallv calls in ad_gpfs_aggrs.c where the
send/recv data comes from places like req[r].lens, and the send
buffer and send displacements for example were being calculated as
sbuf = pick one of the reqs: req[bottom].lens
sdisps[r] = req[r].lens - req[bottom].lens
which might be okay if the .lens was data inside of req[] so they'd
all be close to each other. But each .lens field is just a pointer
that's malloced, so those addresses can be all over the place, so the
integer-sized sdisps[] isn't safe.
I changed it to have a new extra array sbuf and rbuf for those two
Alltoallv calls, and copied the data into the sbuf from the same
locations it used to be setting up the sdisps[] at, and after the
Alltoallv I copy the data out of the new rbuf into the same
locations it used to be setting up the rdisps[] at.
For what it's worth I was able to get this to fail -np 2 on a GPFS
filesystem with hints romio_cb_write enable. I didn't whittle the
test down to something small, but it was failing in an
MPI_File_write_all call.
Signed-off-by: Mark Allen <markalle@us.ibm.com>
abstract out the io_array structure to be used in common_ompio_build_io_array function.
This is preparation for a future component that would like to use the same function,
but not modify the io_array stored on the file handle itself.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
In case of using a btl_put in ob1, the handle of the locally registered
memory is sent with a PUT control message. In the current master code
the sent handle is necessary the handle in the frag but if the handle
has been successfully registered in the request, the frag structure does
not have any valid handle and all fragments use the request one.
I suggest to check if the handle in the fragment is valid and if not to
send the handle from the request.
Signed-off-by: Brelle Emmanuel <emmanuel.brelle@atos.net>
In the case the btl_get fails Ob1 tries to fallback on btl_put first but
the return code was ignored. So the code fell back on both btl_put and
btl_send.
Signed-off-by: Brelle Emmanuel <emmanuel.brelle@atos.net>
This is not fixing any issue, it is simply preventing a sefault if the
communicator creation has not happened as expected. Thus, this code path
should never really be hit in a correct MPI application with a valid
communicator creation support.
Signed-off-by: George Bosilca <bosilca@icl.utk.edu>
- there was a set of UCX related issues reported which caused
by mmap API hooks conflicts. We added diagnostic of such
problems to simplify bug-resolving pipeline
Signed-off-by: Sergey Oblomov <sergeyo@mellanox.com>
mark the "self" peer OMPI_OSC_RDMA_PEER_LOCAL_BASE when
the window is dynamically created and use_cpu_atomics is set
in order to correctly handle communications to self.
Thanks Bart Janssens for reporting this issue.
Refs. open-mpi/ompi#6394
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
Place the content of common_ucx_int.h back to the common_ucx.h and
include common_ucx_wpool.h explicitly.
Signed-off-by: Artem Polyakov <artpol84@gmail.com>
Updated the OFI MTL's Recv cancel to be a non-blocking call to match
the MPI spec. Given fi_cancel succeeded, then it is expected that the
user will wait on the request to read the result of if the cancel has
completed.
Signed-off-by: Spruit, Neil R <neil.r.spruit@intel.com
For remote node peers pack smaller worker address, which contains
network device addresses only. This would reduce amount of OOB traffic
during startup.
Signed-off-by: Mikhail Brinskii <mikhailb@mellanox.com>
For the non thread-grouping paths, only the first (0th) OFI context
should be used for communication. Otherwise this would access a non existant
array item and cause segfault.
While at it, clarifiy some content regarding SEPs in README (Credit to Matias Cabral
for README edits).
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@intel.com>
Update the OPAL_CHECK_OFI configury macro:
- Make it safe to call the macro multiple times:
- The checks only execute the first time it is invoked
- Subsequent invocations, it just emits a friendly "checking..."
message so that configure output is sensible/logical
- With the goal of ultimately removing opal/mca/common/ofi, rename the
output variables from OPAL_CHECK_OFI to be
opal_ofi_{happy|CPPFLAGS|LDFLAGS|LIBS}.
- Update btl/ofi, btl/usnic, and mtl/ofi for these new conventions.
- Also, don't use AC_REQUIRE to invoke OPAL_CHECK_OFI because that
causes the macro to be invoked at a fairly random time, which makes
configure stdout confusing / hard to grok.
- Remove a little left-over kruft in OPAL_CHECK_OFI, too (which
resulted in an indenting change, making the change to
opal_check_ofi.m4 look larger than it really is).
Thanks Alastair McKinstry for the report and initial fix.
Thanks Rashika Kheria for the reminder.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
According to the MPI standard the obj_handle is a pointer to an MPI
object, and therefore cannot be MPI_COMM_WORLD. The MPI standard example
14.6 highlight this usage.
Signed-off-by: George Bosilca <bosilca@icl.utk.edu>
... and add `MPI_COMPLEX4`.
This commit changes values of existing `OMPI_DATATYPE_MPI_*` macros.
This change does not affect ABI compatibility of `libmpi.so` and the
like because these values are only used in OMPI internal code.
On the other hand, `ompi_datatype_t::id` values of existing datatypes
are not changed and 73 is newly assigned to for `MPI_COMPLEX4` to
retain ABI compatibility.
Signed-off-by: KAWASHIMA Takahiro <t-kawashima@jp.fujitsu.com>
... and `ompi_mpi_c_short_float_complex` and `ompi_mpi_cxx_sfltcplex`.
These are Open MPI internal variables intended to be defined as
`MPI_SHORT_FLOAT`, `MPI_C_SHORT_FLOAT_COMPLEX`, and
`MPI_CXX_SHORT_FLOAT_COMPLEX` in the future.
`OMPI_DATATYPE_MPI_C_SHORT_FLOAT_COMPLEX` is also required to
support `MPI_COMPLEX4` in the next commit.
Signed-off-by: KAWASHIMA Takahiro <t-kawashima@jp.fujitsu.com>
The type `short float` is proposed for the C language in ISO/IEC JTC
1/SC 22 WG 14 (C WG) for mainly IEEE 754-2008 binary16, a.k.a.
half-precision floating point or FP16.
By this commit, `short float` and `short float _Complex` are detected
in `configure` and used in Open MPI internal code. `MPI_SHORT_FLOAT`
and its complex number version are not added yet.
This commit changes values of existing `OPAL_DATATYPE_*` macros.
This change does not affect ABI compatibility of `libmpi.so` and the
like because these values are only used in OPAL and OMPI internal code.
Signed-off-by: KAWASHIMA Takahiro <t-kawashima@jp.fujitsu.com>
treematch/km_partitioning.c #include "config.h",
but there is no such file when the embedded treematch is used.
In order to prevent the embedded treematch from incorrectly using
the config.h from the embedded hwloc, generate a dummy config.h.
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
When we exceed the threshold number of contexts created, print appropriate help
text
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@intel.com>
We missed an assert to check if ALLOW_OVERTAKE is set or not before
validating the sequence number and this will cause deadlock.
Signed-off-by: Thananon Patinyasakdikul <tpatinya@utk.edu>
Provide the av_attr.count hint (number of addresses that will be
inserted into the address vector through the life of the process)
at initialization of the address vector. It's ok to be a bit
wrong, but some endpoints (RxR) can benefit by not going through
the slow growth realloc churn.
Signed-off-by: Brian Barrett <bbarrett@amazon.com>
This commit fixes a problem reported on the mailing list with
individual writes larger than 512 MB.
The culprit is a floating point division of two large, close values.
Changing the datatypes from float to double (which is what is being
used in the fcoll components) fixes the problem.
See issue #6285 and
https://forum.hdfgroup.org/t/cannot-write-more-than-512-mb-in-1d/5118
Thanks for Axel Huebl and René Widera for reporting the issue.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
With MTLs, there's no "other transport" when the remote side
does not have an active NIC, so we should print a useful error
message when the modex failed (indicating lack of a NIC on
the remote side).
Signed-off-by: Brian Barrett <bbarrett@amazon.com>
Similar to #6286 rounding number of bytes into a single precision floating point value to round up the result of a division is a potential risk due to rounding errors.
- remove floating point operations for `round up`
- removes floating point conversion for round down (native behavior of integer division)
Signed-off-by: René Widera <r.widera@hzdr.de>
