This commit updates the entire codebase to use specific opal types for
all atomic variables. This is a change from the prior atomic support
which required the use of the volatile keyword. This is the first step
towards implementing support for C11 atomics as that interface
requires the use of types declared with the _Atomic keyword.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
We were assuming that the array_of_indices has the same size as the
number of requests (incount), instead of the numberr of actually
active requests. While the patch is trivial, the question of the
size of the array_of_indices should be clarified in the MPI Forum.
Signed-off-by: George Bosilca <bosilca@icl.utk.edu>
so latest ROM-IO can be used with Open MPI.
Note this first and naive implementation does not use the wait_fn callback.
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
This commit eliminates the old opal_atomic_bool_cmpset functions. They
have been replaced by the opal_atomic_compare_exchange_strong
functions.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit renames the atomic compare-and-swap functions to indicate
the return value. This is in preperation for adding support for a
compare-and-swap that returns the old value. At the same time the
return type has been changed to bool.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit adds the `req_start` member to the `ompi_request_t` struct.
The `MPI_START` and `MPI_STARTALL` routines call this callback function
instead of `MCA_PML_CALL(start(...))`. So components that return
persistent request must set this member to their request objects.
`mca_pml_base_module_t::pml_start` is not deleted because
`MCA_PML_CALL(start(...))` is still used elsewhere across OMPI.
Signed-off-by: KAWASHIMA Takahiro <t-kawashima@jp.fujitsu.com>
Convert the predefined MPI object padding to a fixed number of bytes
(vs. a multiple of sizeof(void*)) so that the padding is the same size
between 32 and 64 bit builds. I.e., we won't have a situation where
we've run out of padding in 32 bit builds but still have more space
available in 64 bit builds.
Fixes#3610
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
* Complete rewrite of opal_pointer_array
Instead of a cache oblivious linear search use a bits array
to speed up the management of the free space. As a result we
slightly increase the memory used by the structure, but we get a
significant boost in performance.
Signed-off-by: George Bosilca <bosilca@icl.utk.edu>
* Do not register datatypes in the f2c translation table.
The registration is now done up into the Fortran layer, by
forcing a call to MPI_Type_c2f.
Signed-off-by: George Bosilca <bosilca@icl.utk.edu>
According to the MPI-3.1 p.52 and p.53 (cited below), a request
created by `MPI_*_INIT` but not yet started by `MPI_START` or
`MPI_STARTALL` is inactive therefore `MPI_WAIT` or its friends
must return immediately if such a request is passed.
The current implementation hangs in `MPI_WAIT` and its friends
in such case because a persistent request is initialized as
`req_complete = REQUEST_PENDING`. This commit fixes the
initialization.
Also, this commit fixes internal requests used in `MPI_PROBE`
and `MPI_IPROBE` which was marked wrongly as persistent.
MPI-3.1 p.52:
We shall use the following terminology: A null handle is a handle
with value MPI_REQUEST_NULL. A persistent request and the handle
to it are inactive if the request is not associated with any ongoing
communication (see Section 3.9). A handle is active if it is neither
null nor inactive. An empty status is a status which is set to return
tag = MPI_ANY_TAG, source = MPI_ANY_SOURCE, error = MPI_SUCCESS, and
is also internally configured so that calls to MPI_GET_COUNT,
MPI_GET_ELEMENTS, and MPI_GET_ELEMENTS_X return count = 0 and
MPI_TEST_CANCELLED returns false. We set a status variable to empty
when the value returned by it is not significant. Status is set in
this way so as to prevent errors due to accesses of stale information.
MPI-3.1 p.53:
One is allowed to call MPI_WAIT with a null or inactive request
argument. In this case the operation returns immediately with empty
status.
Signed-off-by: KAWASHIMA Takahiro <t-kawashima@jp.fujitsu.com>
* Add a configure time option to rename libmpi(_FOO).*
- `--with-libmpi-name=STRING`
* This commit only impacts the installed libraries.
Internal, temporary libraries have not been renamed to limit the
scope of the patch to only what is needed.
For example:
```shell
shell$ ./configure --with-libmpi-name=wookie
...
shell$ find . -name "libmpi*"
shell$ find . -name "libwookie*"
./lib/libwookie.so.0.0.0
./lib/libwookie.so.0
./lib/libwookie.so
./lib/libwookie.la
./lib/libwookie_mpifh.so.0.0.0
./lib/libwookie_mpifh.so.0
./lib/libwookie_mpifh.so
./lib/libwookie_mpifh.la
./lib/libwookie_usempi.so.0.0.0
./lib/libwookie_usempi.so.0
./lib/libwookie_usempi.so
./lib/libwookie_usempi.la
shell$
```
This commit changes the sematics of ompi request callbacks. If a
request's callback has freed or re-posted (using start) a request
the callback must return 1 instead of OMPI_SUCCESS. This indicates
to ompi_request_complete that the request should not be modified
further. This fixes a race condition in osc/pt2pt that could lead
to the req_state being inconsistent if a request is freed between
the callback and setting the request as complete.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit fixes a hang reported by @nysal which happens when a
request is completed after a sync object is created but before the
sync object can be assigned to the request. In this case we need to
set the sync signaling field to false to ensure WAIT_SYNC_RELEASE does
not hang.
Fixesopen-mpi/ompi#1828
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
by avoiding extra atomic exchanges.
Use indices array to mark already completed connections
in the pre-wait loop to avoid extra atomic exchanges
in the after-wait loop.
The OPAL_ENABLE_MULTI_THREADS macro is always defined as 1. This was
causing us to always use the multi-thread path for synchronization
objects. The code has been updated to use the opal_using_threads()
function. When MPI_THREAD_MULTIPLE support is disabled at build time
(2.x only) this function is a macro evaluating to false so the
compiler will optimize out the MT-path in this case. The
OPAL_ATOMIC_ADD_32 macro has been removed and replaced by the existing
OPAL_THREAD_ADD32 macro.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit fixes a performance regression introduced by the request
rework. We were always using the multi-thread path because
OPAL_ENABLE_MULTI_THREADS is either not defined or always defined to 1
depending on the Open MPI version. To fix this I removed the
conditional and added a conditional on opal_using_threads(). This path
will be optimized out in 2.0.0 in a non-thread-multiple build as
opal_using_threads is #defined to false in that case.
Fixesopen-mpi/ompi#1806
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit fixes a bug in waitany that causes the code to go past the
beginning of the request array. The loop conditional i >= 0 is invalid
since i is unsigned. Changed to loop to check (i+1) > 0.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
I am not sure if we should continue to maintain the request support
for FT_CR, but I tried here to simplify the code while maintaining
the same meaning.
Rewrite the ompi_request_complete function to take in account the
with_signal argument. Change the comment to explain the expected
behavior.
Alter all the ompi_request_complete uses to make sure the status of the
request is set before calling ompi_request_complete.
bot🏷️enhancement
This commit fixes two bugs in MPI_Wait_any:
- If all requests are inactive then the sync wait would hang forever
because no requests are attached to the sync.
- The request pointer was pointing to the request before the completed
request which caused the wrong request to be freed or marked inactive.
MPI_Wait_some had a similar issue if all the requests were pending.
These issues were identified by MTT.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
The request.h header is unfortunately included files in the C++
bindings. C++ does not allow assigning from void * to another
pointer without a cast. This commit adds the cast. We can clean this
up when the C++ bindings are deleted.
Fixesopen-mpi/ompi#1707
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
* Remodel the request.
Added the wait sync primitive and integrate it into the PML and MTL
infrastructure. The multi-threaded requests are now significantly
less heavy and less noisy (only the threads associated with completed
requests are signaled).
* Fix the condition to release the request.
If during the request completion callback we post another request that
completes right away (such a small send or a match for an unexpected
short message) we will try to complete the second request while holding
the lock for the completion of the first. For performance reasons
(mainly to avoid unlocking and locking the request mutex several times)
we have made the request lock recursive.
Use of the old ompi_free_list_t and ompi_free_list_item_t is
deprecated. These classes will be removed in a future commit.
This commit updates the entire code base to use opal_free_list_t and
opal_free_list_item_t.
Notes:
OMPI_FREE_LIST_*_MT -> opal_free_list_* (uses opal_using_threads ())
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL
All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic.
This commit was SVN r32317.
MPI_Comm_idup.
As part of this work I implemented a basic request scheduler in
ompi/comm/comm_request.c. This scheduler might be useful for more
than just communicator requests and could be moved to ompi/request
if there is a demand. Otherwise I will leave it where it is.
Added a non-blocking version of ompi_comm_set to support ompi_comm_idup.
The call makes a recursive call to comm_dup and a non-blocking version
was needed. To simplify the code the blocking version calls the nonblocking
version and waits on the resulting request if one exists.
cmr=v1.7.4:reviewer=jsquyres:ticket=trac:3796
This commit was SVN r29334.
The following Trac tickets were found above:
Ticket 3796 --> https://svn.open-mpi.org/trac/ompi/ticket/3796
Calling OMPI_REQUEST_INIT puts the request into an _INACTIVE state
instead of an _INVALID state, which we don't want if it's been
simply been constructed, e.g., in a free_list. Without this change a
future change to call destructors at free list destruction time will
result in request dtor state assertion failures.
Reviewed-by: bosilca
cmr=v1.7.4:reviewer=bosilca
This commit was SVN r29095.
