Fix static port wireup by recording the TCP port mpirun is using and correctly passing the regex of hosts to the daemons. Do a better job of closing sockets on failed connection attempts. Correctly identify the remote host in the associated error message.
Fix partial allocation operations by not attempting to set #slots on nodes that were not used, and thus don't have a daemon or topology assigned to them
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Repair rsh/ssh tree spawn by unpacking and updating the nidmap in remote_spawn.
Add more specific error messages so the cause of a messaging problem is a little clearer. Remove some stale code. Ensure we stop trying to send a message after a few times.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Cleanup a typo, and remove no longer needed MCA params for hetero nodes and hetero apps. Hetero nodes will always be automatically detected. We don't support a mix of 32 and 64 bit apps
Modify the orte_node_t to use orte_topology_t instead of hwloc_topology_t, updating all the places that use it. Ensure that we properly update topology when we see a different one on a compute node.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
modified: ../orte/mca/rml/base/rml_base_frame.c
modified: ../orte/mca/rml/base/rml_base_stubs.c
deleted: ../orte/mca/rml/ofi/.opal_ignore
modified: ../orte/mca/rml/ofi/Makefile.am
modified: ../orte/mca/rml/ofi/rml_ofi.h
modified: ../orte/mca/rml/ofi/rml_ofi_component.c
modified: ../orte/mca/rml/ofi/rml_ofi_send.c
modified: ../orte/test/system/ofi_conduit_stress.c
Removed stale include directive
modified: ../orte/mca/rml/ofi/Makefile.am
The ofi plugin supports multiple providers, and identifies them
by ofi_prov_id, changed the previous name conduit_id to ofi_prov_id
modified: ../orte/mca/rml/base/base.h
modified: ../orte/mca/rml/ofi/rml_ofi.h
modified: ../orte/mca/rml/ofi/rml_ofi_component.c
modified: ../orte/mca/rml/ofi/rml_ofi_request.h
modified: ../orte/mca/rml/ofi/rml_ofi_send.c
Adding ofi plugin to allow for opening a conduit to use ethernet/fabric.
modified: ../orte/mca/rml/base/rml_base_frame.c
modified: ../orte/mca/rml/base/rml_base_stubs.c
deleted: ../orte/mca/rml/ofi/.opal_ignore
modified: ../orte/mca/rml/ofi/Makefile.am
modified: ../orte/mca/rml/ofi/rml_ofi.h
modified: ../orte/mca/rml/ofi/rml_ofi_component.c
modified: ../orte/mca/rml/ofi/rml_ofi_send.c
modified: ../orte/test/system/ofi_conduit_stress.c
Removed stale include directive
modified: ../orte/mca/rml/ofi/Makefile.am
The ofi plugin supports multiple providers, and identifies them
by ofi_prov_id, changed the previous name conduit_id to ofi_prov_id
modified: ../orte/mca/rml/base/base.h
modified: ../orte/mca/rml/ofi/rml_ofi.h
modified: ../orte/mca/rml/ofi/rml_ofi_component.c
modified: ../orte/mca/rml/ofi/rml_ofi_request.h
modified: ../orte/mca/rml/ofi/rml_ofi_send.c
Fixed merge issues, and minor pull-request comments
modified: ../orte/mca/rml/base/base.h
modified: ../orte/mca/rml/base/rml_base_frame.c
modified: ../orte/mca/rml/ofi/rml_ofi.h
modified: ../orte/mca/rml/ofi/rml_ofi_component.c
Adding ofi plugin to allow for opening a conduit to use ethernet/fabric.
modified: ../orte/mca/rml/base/rml_base_frame.c
modified: ../orte/mca/rml/base/rml_base_stubs.c
deleted: ../orte/mca/rml/ofi/.opal_ignore
modified: ../orte/mca/rml/ofi/Makefile.am
modified: ../orte/mca/rml/ofi/rml_ofi.h
modified: ../orte/mca/rml/ofi/rml_ofi_component.c
modified: ../orte/mca/rml/ofi/rml_ofi_send.c
modified: ../orte/test/system/ofi_conduit_stress.c
Removed stale include directive
modified: ../orte/mca/rml/ofi/Makefile.am
The ofi plugin supports multiple providers, and identifies them
by ofi_prov_id, changed the previous name conduit_id to ofi_prov_id
modified: ../orte/mca/rml/base/base.h
modified: ../orte/mca/rml/ofi/rml_ofi.h
modified: ../orte/mca/rml/ofi/rml_ofi_component.c
modified: ../orte/mca/rml/ofi/rml_ofi_request.h
modified: ../orte/mca/rml/ofi/rml_ofi_send.c
Adding ofi plugin to allow for opening a conduit to use ethernet/fabric.
modified: ../orte/mca/rml/base/rml_base_frame.c
modified: ../orte/mca/rml/base/rml_base_stubs.c
deleted: ../orte/mca/rml/ofi/.opal_ignore
modified: ../orte/mca/rml/ofi/Makefile.am
modified: ../orte/mca/rml/ofi/rml_ofi.h
modified: ../orte/mca/rml/ofi/rml_ofi_component.c
modified: ../orte/mca/rml/ofi/rml_ofi_send.c
modified: ../orte/test/system/ofi_conduit_stress.c
Removed stale include directive
modified: ../orte/mca/rml/ofi/Makefile.am
Fixed merge issues, and minor pull-request comments
modified: ../orte/mca/rml/base/base.h
modified: ../orte/mca/rml/base/rml_base_frame.c
modified: ../orte/mca/rml/ofi/rml_ofi.h
modified: ../orte/mca/rml/ofi/rml_ofi_component.c
Removed trailing space
modified: ../orte/mca/rml/ofi/rml_ofi_component.c
Cleaned up test- ofi_conduit_stress.c
modified: ../orte/test/system/ofi_conduit_stress.c
cleaned up printing the provider info during initialisation
modified: ../orte/mca/rml/ofi/rml_ofi.h
modified: ../orte/mca/rml/ofi/rml_ofi_component.c
Signed-off-by: Anandhi S Jayakumar <anandhi.s.jayakumar@intel.com>
Fixing warnings
modified: ../orte/mca/rml/ofi/rml_ofi.h
modified: ../orte/mca/rml/ofi/rml_ofi_component.c
modified: ../orte/mca/rml/ofi/rml_ofi_send.c
Signed-off-by: Anandhi S Jayakumar <anandhi.s.jayakumar@intel.com>
minor cleanup
modified: ../orte/mca/rml/ofi/rml_ofi_component.c
modified: ../orte/mca/rml/ofi/rml_ofi_send.c
Signed-off-by: Anandhi S Jayakumar <anandhi.s.jayakumar@intel.com>
more cleanup
modified: ../orte/mca/rml/ofi/rml_ofi_component.c
Signed-off-by: Anandhi S Jayakumar <anandhi.s.jayakumar@intel.com>
Sending the ethernet address only in the get_contact_info, rest will be sent through modex
modified: ../orte/mca/rml/ofi/rml_ofi.h
modified: ../orte/mca/rml/ofi/rml_ofi_component.c
Signed-off-by: Anandhi S Jayakumar <anandhi.s.jayakumar@intel.com>
Adding error logging on failures
modified: ../orte/mca/rml/ofi/rml_ofi_component.c
Signed-off-by: Anandhi S Jayakumar <anandhi.s.jayakumar@intel.com>
Handling the OPAL_MODEX_SEND/RECV generically for all ofi providers.
modified: ../orte/mca/rml/ofi/rml_ofi.h
modified: ../orte/mca/rml/ofi/rml_ofi_component.c
modified: ../orte/mca/rml/ofi/rml_ofi_send.c
Signed-off-by: Anandhi S Jayakumar <anandhi.s.jayakumar@intel.com>
Adding to build ofi for limited people
new file: ../orte/mca/rml/ofi/.opal_ignore
new file: ../orte/mca/rml/ofi/.opal_unignore
Signed-off-by: Anandhi S Jayakumar <anandhi.s.jayakumar@intel.com>
Removign the error logging for now
modified: ../orte/mca/rml/ofi/rml_ofi_component.c
Still not completely done as we need a better way of tracking the routed module being used down in the OOB - e.g., when a peer drops connection, we want to remove that route from all conduits that (a) use the OOB and (b) are routed, but we don't want to remove it from an OFI conduit.
Multiple conduits can exist at the same time, and can even point to the same base transport. Each conduit can have its own characteristics (e.g., flow control) based on the info keys provided to the "open_conduit" call. For ease during the transition period, the "legacy" RML interfaces remain as wrappers over the new conduit-based APIs using a default conduit opened during orte_init - this default conduit is tied to the OOB framework so that current behaviors are preserved. Once the transition has been completed, a one-time cleanup will be done to update all RML calls to the new APIs and the "legacy" interfaces will be deleted.
While we are at it: Remove oob/usock component to eliminate the TMPDIR length problem - get all working, including oob_stress
If requested, obtain stacktraces for each application process and report it to stderr upon timeout
stack traces: minor improvements
- Also include the hostname and PID of the each process for which
we're sending the stack traces (vs. just including the ORTE process
name)
- Send a specific error message if we couldn't find "gstack" in the
$PATH (e.g., on OS X)
- Send a sepcific error message if gstack fails to run
- Print a message that obtaining the stack traces may take a few
seconds so that users don't wonder what's happening
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
help-orterun.txt: minor tweaks
Trivial update: show "--timeout" (instead of "-timeout") in the help
message, just to encourage the use of double-dash options.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
trivial: stacktrace -> stack trace
Trivial word smything.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
* qos framework is moving to the scon layer and is no longer required in ORTE
* remove the rml/ftrm component as we now have multiple active components, and so the wrapper needs to be rethought
* no need for separating the "base" from "API" module definition. The two are identical
* move the "stub" functions into their own file for cleanliness
* general cleanup to meet coding standards
* cleanup some logic in the stubs
* Clean up the DVM so it continues to run even when applications error out and we would ordinarily abort the daemons.
* Create a new errmgr component for the DVM to handle the differences.
* Cleanup the DVM state component.
* Add ORTE bindings directory and brief README
* Pass a local tool index around to match jobs.
* Pass the jobid on job completion.
* Fix initialization logic.
* Add framework for python wrapper.
* Fix terminate-with-non-zero-exit behavior so it properly terminates only the indicated procs, notifies orte-submit, and orte-dvm continues executing.
* Add some missing options to orte-dvm
* Fix a bug in -host processing that caused us to ignore the #slots designator. Add a new attribute to indicate "do not expand the DVM" when submitting job spawn requests.
* It actually makes no sense that we treat the termination of all children differently than terminating the children of a specific job - it only creates confusion over the difference in behavior. So terminate children the same way regardless.
Extend the cmd_line utility to easily allow layering of command line definitions
Catch up with ORTE interface change and make build more generic.
Disable "fixed dvm" logic for now.
Add another cmd_line function to merge a table of cmd line options with another one, reporting as errors any duplicate entries. Use this to allow orterun to reuse the orted_submit code
Fix the "fixed_dvm" logic by ensuring we reset num_new_daemons to zero. Also ensure that the nidmap is sent with the first job so the downstream daemons get the node info. Remove a duplicate cmd line entry in orterun.
Revise the DVM startup procedure to pass the nidmap only once, at the startup of the DVM. This reduces the overhead on each job launch and ensures that the nidmap doesn't get overwritten.
Add new commands to get_orted_comm_cmd_str().
Move ORTE command line options to orte_globals.[ch].
Catch up with extra orte_submit_init parameter.
Add example code.
Add documentation.
Bump version.
The nidmap and routing data must be updated prior to propagating the xcast or else the xcast will fail.
Fix the return code so it is something more expected when an error occurs. Ensure we get an error returned to us when we fail to launch for some reason. In this case, we will always get a launch_cb as we did indeed attempt to spawn it. The error code will be returned in the complete_cb.
Fix the return code from orte_submit_job - it was returning the tracker index instead of "success". Take advantage of ORTE's pretty-print capabilities to provide a nice error output explaining why we failed to launch. Ensure we always get a launch_cb when we fail to launch, but no complete_cb as the job never launched.
Extend the error reporting capability to job completion as well.
Add index parameter to orte_submit_job().
Add orte_job_cancel and implement ORTE_DAEMON_TERMINATE_JOB_CMD.
Factor out dvm termination.
Parse the terminate option at tool level.
Add error string for ORTE_ERR_JOB_CANCELLED.
Add some safeguards.
Cleanup and/of comments.
Enable the return.
Properly ORTE_DECLSPEC orte_submit_halt.
Add orte_submit_halt and orte_submit_cancel to interface.
Use the plm interface to terminate the job
Bring Slurm PMI-1 component online
Bring the s2 component online
Little cleanup - let the various PMIx modules set the process name during init, and then just raise it up to the ORTE level. Required as the different PMI environments all pass the jobid in different ways.
Bring the OMPI pubsub/pmi component online
Get comm_spawn working again
Ensure we always provide a cpuset, even if it is NULL
pmix/cray: adjust cray pmix component for pmix
Make changes so cray pmix can work within the integrated
ompi/pmix framework.
Bring singletons back online. Implement the comm_spawn operation using pmix - not tested yet
Cleanup comm_spawn - procs now starting, error in connect_accept
Complete integration
This commit does two things. It removes checks for C99 required
headers (stdlib.h, string.h, signal.h, etc). Additionally it removes
definitions for required C99 types (intptr_t, int64_t, int32_t, etc).
Signed-off-by: Nathan Hjelm <hjelmn@me.com>
A few uninitialized common symbols are remaining (generated by flex) :
* orte/mca/rmaps/rank_file/rmaps_rank_file_lex.c: orte_rmaps_rank_file_leng
* orte/mca/rmaps/rank_file/rmaps_rank_file_lex.c: orte_rmaps_rank_file_text
* orte/util/hostfile/hostfile_lex.c: orte_util_hostfile_leng
* orte/util/hostfile/hostfile_lex.c: orte_util_hostfile_text
This commit adds support for project_framework_component_* parameter
matching. This is the first step in allowing the same framework name
in multiple projects. This change also bumps the MCA component version
to 2.1.0.
All master frameworks have been updated to use the new component
versioning macro. An mca.h has been added to each project to add a
project specific versioning macro of the form
PROJECT_MCA_VERSION_2_1_0.
Signed-off-by: Nathan Hjelm <hjelmn@me.com>
This commit adds an owner file in each of the component directories
for each framework. This allows for a simple script to parse
the contents of the files and generate, among other things, tables
to be used on the project's wiki page. Currently there are two
"fields" in the file, an owner and a status. A tool to parse
the files and generate tables for the wiki page will be added
in a subsequent commit.
